Le Wed, 07 Aug 2002 21:32:56 -0400, christophe Josselin a écrit :
>> direct rendering: No
> Voila, l'accélération n'est pas active Donc maintenant on va vérifier si
> le module agpart est actif, pour cela j'ai besoin du résultat de la
> commande lsmod (avec un l comme LIMA) exécutée en console sous root,
> pour connaitre les modules chargés etactifs.
Toujours à la recherche de solution, voici ce que j'ai trouvé dans des
logs :
(II) I810(0): [drm] created "i810" driver at busid "PCI:0:1:0"
(II) I810(0): [drm] added 8192 byte SAREA at 0xd4968000
(II) I810(0): [drm] mapped SAREA 0xd4968000 to 0x40016000
(II) I810(0): [drm] framebuffer handle = 0xe4000000
(II) I810(0): [drm] added 1 reserved context for kernel
(EE) I810(0): [dri] I810DRIScreenInit failed because of a version mismatch.
[dri] i810.o kernel module version is 1.1.0 but version 1.2 or greater is needed.
[dri] Disabling DRI.
(EE) I810(0): [drm] failed to remove DRM signal handler
(II) I810(0): [drm] removed 1 reserved context for kernel
DRIUnlock called when not locked
(II) I810(0): [drm] unmapping 8192 bytes of SAREA 0xd4968000 at 0x40016000
(==) I810(0): Write-combining range (0xe4000000,0x4000000)
(II) I810(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) I810(0): Setting dot clock to 56.3 MHz [ 0x3b 0xb 0x30 ] [ 61 13 3 ]
(II) I810(0): chose watermark 0x22108000: (tab.freq 56.3)
(WW) I810(0): xf86AllocateGARTMemory: allocation of 1024 pages failed
(Cannot allocate memory)
(II) I810(0): No physical memory available for 4194304 bytes of DCACHE
(II) I810(0): Adding 768 scanlines for pixmap caching
(II) I810(0): Allocated Scratch Memory
(II) I810(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
28 128x128 slots
6 256x256 slots
(==) I810(0): Backing store disabled
(==) I810(0): Silken mouse enabled
(**) Option "dpms" "on"
(**) I810(0): DPMS enabled
(==) I810(0): Direct rendering disabled
(WW) I810(0): Option "AGPMode" is not used
J'ai un peu de mal à bien analyser, mais ça serait un pb avec le i810.o
non?
--
Christophe PEREZ
Vous souhaitez acquerir votre Pack ou des Services MandrakeSoft?
Rendez-vous sur "http://www.mandrakestore.com";
