Once again I found my own problem. Thanks. ----- Original Message ----- From: "Frederick Samarelli" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, December 01, 2003 10:16 AM Subject: Re: [Declude.JunkMail] SKIPIFWEIGHT and MAXWEIGHT
> I have my system setup as listed below. > > Why would the system ingnore the WEIGHT100 DELETE > > it is performing WEIGHT40 ROUTETO [EMAIL PROTECTED] > > (In the top of my Filters) > SKIPIFWEIGHT 100 > MAXWEIGHT 100 > > $default$.junkmail > WEIGHT100 DELETE > > Global.cfg > WEIGHT100 weight x x 100 0 > > > > > ----- Original Message ----- > From: "Kami Razvan" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Saturday, November 29, 2003 5:34 AM > Subject: RE: [Declude.JunkMail] SKIPIFWEIGHT and MAXWEIGHT > > > > Hi Frederick: > > > > Here is what we do: > > > > # Version>= 1.27i28: Skip the test if weight is reached > > SKIPIFWEIGHT 70 > > # Version>= 1.27i28: Exit the test if weight is reached > > MAXWEIGHT 60 > > REMOTEIP 0 STARTSWITH 157.151.5 > > REMOTEIP 0 STARTSWITH 193.216.245.227 > > REMOTEIP 0 STARTSWITH 194.143.183.53 > > > > > > You have to be using Declude 1.27i27 or 28 (I don't remember) or higher.. > > > > Simply add them to the top of your filter files and it will do what they > say > > they do.. > > > > Upon start of the filter if the total weight prior to entering the filter > is > > 70 then the filter will not run and if during the run of the filter the > > weight associated with the filter reaches 60 then the filter exits. > > > > So if you have a weight of 50 going into the filter you can exit the > filter > > with no more than 110 as weight. > > > > OR > > > > If you are running the filter and you are already at a weight of 70 then > the > > filter will never run and you will exit with 70. > > > > Recommendation: > > > > Make sure you put all your weights that have negative weight prior to the > > ones with positive weight. That is what we do - all of our negative > weights > > are on top of the global.cfg and we have structured our filters such that > > the bigger filters are the last to execute so hopefully if the weight is > > large enough prior to getting to them they will not run. > > > > Looking at our log files it is incredible how many of the filters are not > > even running anymore but they are there just in case... > > > > Hope that answers your question.. > > > > Regards, > > Kami > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of Frederick > Samarelli > > Sent: Friday, November 28, 2003 11:20 PM > > To: [EMAIL PROTECTED] > > Subject: [Declude.JunkMail] SKIPIFWEIGHT and MAXWEIGHT > > > > Does any one have more information on these SKIPIFWEIGHT and MAXWEIGHT > > > > > > Thanks. > > > > Fred > > > > --- > > [This E-mail was scanned for viruses by Declude Virus > (http://www.declude.com)] > > > > --- > > This E-mail came from the Declude.JunkMail mailing list. To > > unsubscribe, just send an E-mail to [EMAIL PROTECTED], and > > type "unsubscribe Declude.JunkMail". The archives can be found > > at http://www.mail-archive.com. > > > > --- > [This E-mail was scanned for viruses by Declude Virus (http://www.declude.com)] > > --- > This E-mail came from the Declude.JunkMail mailing list. To > unsubscribe, just send an E-mail to [EMAIL PROTECTED], and > type "unsubscribe Declude.JunkMail". The archives can be found > at http://www.mail-archive.com. > --- [This E-mail was scanned for viruses by Declude Virus (http://www.declude.com)] --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type "unsubscribe Declude.JunkMail". The archives can be found at http://www.mail-archive.com.