Different systems / configuration respond differently to these settings. In particular they to fine tune through-put with CPU utilization.
1. SLOW server that is heavily loaded You may want to try to increase WAITBETWEENTHREADS and lower THREADS. 2. FAST server Use the THREADS and WAITFORTHREADS to adjust the CPU utilization. When decludeproc first starts up it will use a lot of the CPU but after that the %CPU used by decludeproc should come way down. The %CPU of all processes running may be high depending on external tests, other processes, etc. If the system is spiking but coming down quickly that's good. David B www.declude.com When decludeproc first starts up it will use a lot of the CPU but once it gets cooking the %CPU used by decludeproc should come way down. The %CPU of all processes running may be high depending on external tests, other processes, etc. It the system is spiking but coming down quickly that's good. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Darrell ([EMAIL PROTECTED]) Sent: Thursday, September 22, 2005 11:51 AM To: Declude.JunkMail@declude.com Subject: Re: [Declude.JunkMail] Declude Beta 3.0.4.4 Posted David, Can you go over how you see them helping and what the positive benefit would be in tweaking those values? For example: by setting the WAITBETWEENTHREADS to 1 second it will help by ..... Darrell David Barker writes: > 2 new Directives > > WAITFORTHREADS 1500 > Located in the Declude.cfg - Defined in milliseconds eg. 1500 = 1.5 seconds > this can be changed so that when the maximum threads are in use this time > specifics the wait before checking to launch more threads. > > WAITBETWEENTHREADS 1 > Located in the Declude.cfg - Defined in milliseconds eg. 1 = 1 millisecond > The time to wait between spawning one thread and starting to process another > thread. > > David B > www.declude.com > > --- > This E-mail came from the Declude.JunkMail mailing list. To > unsubscribe, just send an E-mail to [EMAIL PROTECTED], and > type "unsubscribe Declude.JunkMail". The archives can be found > at http://www.mail-archive.com. ------------------------------------------------------------------------ Check out http://www.invariantsystems.com for utilities for Declude And Imail. IMail/Declude Overflow Queue Monitoring, SURBL/URI integration, MRTG Integration, and Log Parsers. --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type "unsubscribe Declude.JunkMail". The archives can be found at http://www.mail-archive.com. --- This E-mail came from the Declude.JunkMail mailing list. To unsubscribe, just send an E-mail to [EMAIL PROTECTED], and type "unsubscribe Declude.JunkMail". The archives can be found at http://www.mail-archive.com.
