hmm...well this might be right.
I really only wanted the names tho, but this might be good to add also.

Thanks again,
Jeremy

-----Original Message-----
From: "Andreas Toth" <[EMAIL PROTECTED]>
To: Multiple recipients of list delphi <[EMAIL PROTECTED]>
Date: Wed, 15 Jan 2003 10:18:10 +1300
Subject: RE: [DUG]:  Disk Images

> Maybe you need to add a verification routine into your floppy ripper?
> 
> After all this, can you actually successfully locate the FAT and ROOT
> now?
> 
> Note that you may also have to support the FAT2 table on sector 10 and
> the
> floppy layout on the BOOT sector (sector 0). All this information is
> quite
> well described on the "Floppy Disk I/O" presentation at
> ("www.cs.nps.navy.mil/people/faculty/ kern/cs3450/lab10.ppt" (I
> incorrectly
> labelled this "DOS Disk Formats" in my previous message).
> 
> 
> -Andreas
> 
> 
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
> Behalf Of vss
> Sent: Wednesday, 15 January 2003 09:53
> To: Multiple recipients of list delphi
> Subject: RE: [DUG]: Disk Images
> 
> 
> Ah....well thats insteresting. Every, well almost every page that that
> google search returned said that th starting sector of the Root Record
> was sector 19.
> I Ripped another disk, and guess what, it must have been a "Special"
> disk because out of 4 images I have only one is not right, and that was
> the one that must be a bit special...SO, after all that, I am in
> business :-)
> 
> Jeremy
> 
> -----Original Message-----
> From: "Andreas Toth" <[EMAIL PROTECTED]>
> To: Multiple recipients of list delphi <[EMAIL PROTECTED]>
> Date: Wed, 15 Jan 2003 09:02:49 +1300
> Subject: RE: [DUG]:  Disk Images
> 
> > Hi Jeremy,
> > Hmm, my knowledge in this area is pretty limited. Have you tried
> >
> http://www.google.co.nz/search?hl=en&ie=UTF-8&oe=UTF-8&q=%22sector+19%2
> > 2+roo
> > t+disk+fat -- especially the "DOS Disk Formats" presentation
> > ("www.cs.nps.navy.mil/people/faculty/ kern/cs3450/lab10.ppt")? Please
> > let me
> > know if this is of no help since I know people who've done low-level
> > work
> > like this and that should be able to help you out.
> >
> >
> > -Andreas
> >
> > -----Original Message-----
> > From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On
> > Behalf Of Jeremy Coulter
> > Sent: Wednesday, 15 January 2003 07:20
> > To: Multiple recipients of list delphi
> > Subject: RE: [DUG]: Disk Images
> >
> >
> > Hi Andreas.
> > Well, after a LOT, and I mean a LOT of searching, I have been able to
> > workout what I need to do.
> > I now know where the filenames are in the Image, just the same as
> they
> > would be on the floppy, and you were correct about reading the
> entries
> > in the FAT sector.
> > The info I want, is in the ROOT sector, and I have been able to "See"
> > some info by looking at the file in a Hex editor.
> > I found that the root sector is absolute sector 19.
> > The problem I seem to have now, is calculating correctly the start of
> > the root sector.
> > Any ideas?
> >
> > Jeremy
> >
> > -----Original Message-----
> > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
> On
> > Behalf Of Andreas Toth
> > Sent: Tuesday, 14 January 2003 11:53
> > To: Multiple recipients of list delphi
> > Subject: RE: [DUG]: Disk Images
> >
> >
> > I assume you are saying that your tool creates image files that are
> > compatible with WinImage. Assuming these images are simple binary
> dumps
> > of floppies and that there's nothing fancy going on, then WinImage is
> > basically treating the image as the raw data on a floppy and must as
> > such locate the FAT and parse it to determine the content. The FAT
> > file-system is fairly well-know, so you should be able to find
> > information on how you could do this. (You could start by looking at
> > Linux drivers, for example.)
> >
> >
> > -Andreas
> >
> > -----Original Message-----
> > From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On
> > Behalf Of vss
> > Sent: Tuesday, 14 January 2003 10:47
> > To: Multiple recipients of list delphi
> > Subject: [DUG]: Disk Images
> >
> >
> > Hi all.
> > I have written a wee tool to create Images of floppies.
> > The only problem IS, I want to be able to read what is IN the image.
> > i.e. I looked at WinImage, which actually opens the images my tool
> > makes, and I can see whats in the image.
> >
> > Anyone got any Ideas?
> >
> > Thanks, Jeremy
> >
> >
> -----------------------------------------------------------------------
> > -
> > ---
> >     New Zealand Delphi Users group - Delphi List -
> [EMAIL PROTECTED]
> >                   Website: http://www.delphi.org.nz
> > To UnSub, send email to: [EMAIL PROTECTED]
> > with body of "unsubscribe delphi"
> > Web Archive at: http://www.mail-archive.com/delphi%40delphi.org.nz/
> >
> >
> -----------------------------------------------------------------------
> > -
> > ---
> >     New Zealand Delphi Users group - Delphi List -
> [EMAIL PROTECTED]
> >                   Website: http://www.delphi.org.nz
> > To UnSub, send email to: [EMAIL PROTECTED]
> > with body of "unsubscribe delphi"
> > Web Archive at: http://www.mail-archive.com/delphi%40delphi.org.nz/
> >
> >
> -----------------------------------------------------------------------
> > ----
> >     New Zealand Delphi Users group - Delphi List -
> [EMAIL PROTECTED]
> >                   Website: http://www.delphi.org.nz
> > To UnSub, send email to: [EMAIL PROTECTED]
> > with body of "unsubscribe delphi"
> > Web Archive at: http://www.mail-archive.com/delphi%40delphi.org.nz/
> >
> >
> -----------------------------------------------------------------------
> > ----
> >     New Zealand Delphi Users group - Delphi List -
> [EMAIL PROTECTED]
> >                   Website: http://www.delphi.org.nz
> > To UnSub, send email to: [EMAIL PROTECTED]
> > with body of "unsubscribe delphi"
> > Web Archive at: http://www.mail-archive.com/delphi%40delphi.org.nz/
> 
> -----------------------------------------------------------------------
> ----
>     New Zealand Delphi Users group - Delphi List - [EMAIL PROTECTED]
>                   Website: http://www.delphi.org.nz
> To UnSub, send email to: [EMAIL PROTECTED]
> with body of "unsubscribe delphi"
> Web Archive at: http://www.mail-archive.com/delphi%40delphi.org.nz/
> 
> -----------------------------------------------------------------------
> ----
>     New Zealand Delphi Users group - Delphi List - [EMAIL PROTECTED]
>                   Website: http://www.delphi.org.nz
> To UnSub, send email to: [EMAIL PROTECTED] 
> with body of "unsubscribe delphi"
> Web Archive at: http://www.mail-archive.com/delphi%40delphi.org.nz/

---------------------------------------------------------------------------
    New Zealand Delphi Users group - Delphi List - [EMAIL PROTECTED]
                  Website: http://www.delphi.org.nz
To UnSub, send email to: [EMAIL PROTECTED] 
with body of "unsubscribe delphi"
Web Archive at: http://www.mail-archive.com/delphi%40delphi.org.nz/

Reply via email to