*** This bug is a duplicate of bug 42970 *** hi
after last system update (to-day) on PC 1 i try to resolve bug on PC 2 i just make updates ,so i'm sure of the reality of he bug) PC1 PC2 with dapper no desktop applet detection of the compact flash reader ( and obviously no mount) other usb readers (pendrive ) work fine pc2 usb pendrive and compact flash with breezy live, work fine (no test on pc1 ... same result i presume) tests made on PC 1 (dapper) Test 1 your previous instruction _______________________________ unplug the card reader, run "sudo udevmonitor -e" and then plug the card reader in again. _______________________________________ [EMAIL PROTECTED]:~# sudo udevmonitor -e udevmonitor prints the received event from the kernel [UEVENT] and the event which udev sends out after rule processing [UDEV] UEVENT[1147418271.776805] add@/devices/pci0000:00/0000:00:1e.0/0000:02:09.0/usb3/3-2 ACTION=add DEVPATH=/devices/pci0000:00/0000:00:1e.0/0000:02:09.0/usb3/3-2 SUBSYSTEM=usb SEQNUM=2785 PHYSDEVBUS=usb PHYSDEVDRIVER=usb UEVENT[1147418271.785691] add@/devices/pci0000:00/0000:00:1e.0/0000:02:09.0/usb3/3-2/3-2:1.0 ACTION=add DEVPATH=/devices/pci0000:00/0000:00:1e.0/0000:02:09.0/usb3/3-2/3-2:1.0 SUBSYSTEM=usb SEQNUM=2786 PHYSDEVBUS=usb DEVICE=/proc/bus/usb/003/005 PRODUCT=4e6/5/208 TYPE=0/0/0 INTERFACE=255/1/1 MODALIAS=usb:v04E6p0005d0208dc00dsc00dp00icFFisc01ip01 UDEV [1147418271.819890] add@/devices/pci0000:00/0000:00:1e.0/0000:02:09.0/usb3/3-2 UDEV_LOG=3 ACTION=add DEVPATH=/devices/pci0000:00/0000:00:1e.0/0000:02:09.0/usb3/3-2 SUBSYSTEM=usb SEQNUM=2785 PHYSDEVBUS=usb PHYSDEVDRIVER=usb UDEVD_EVENT=1 UEVENT[1147418272.039075] add@/class/scsi_host/host7 ACTION=add DEVPATH=/class/scsi_host/host7 SUBSYSTEM=scsi_host SEQNUM=2787 PHYSDEVPATH=/devices/pci0000:00/0000:00:1e.0/0000:02:09.0/usb3/3-2/3-2:1.0/host7 UEVENT[1147418272.041303] add@/class/usb_device/usbdev3.5 ACTION=add DEVPATH=/class/usb_device/usbdev3.5 SUBSYSTEM=usb_device SEQNUM=2788 PHYSDEVPATH=/devices/pci0000:00/0000:00:1e.0/0000:02:09.0/usb3/3-2 PHYSDEVBUS=usb PHYSDEVDRIVER=usb MAJOR=189 MINOR=260 UDEV [1147418272.125963] add@/devices/pci0000:00/0000:00:1e.0/0000:02:09.0/usb3/3-2/3-2:1.0 UDEV_LOG=3 ACTION=add DEVPATH=/devices/pci0000:00/0000:00:1e.0/0000:02:09.0/usb3/3-2/3-2:1.0 SUBSYSTEM=usb SEQNUM=2786 PHYSDEVBUS=usb DEVICE=/proc/bus/usb/003/005 PRODUCT=4e6/5/208 TYPE=0/0/0 INTERFACE=255/1/1 MODALIAS=usb:v04E6p0005d0208dc00dsc00dp00icFFisc01ip01 UDEVD_EVENT=1 UDEV [1147418272.208082] add@/class/scsi_host/host7 UDEV_LOG=3 ACTION=add DEVPATH=/class/scsi_host/host7 SUBSYSTEM=scsi_host SEQNUM=2787 PHYSDEVPATH=/devices/pci0000:00/0000:00:1e.0/0000:02:09.0/usb3/3-2/3-2:1.0/host7UDEVD_EVENT=1 UDEV [1147418272.302685] add@/class/usb_device/usbdev3.5 UDEV_LOG=3 ACTION=add DEVPATH=/class/usb_device/usbdev3.5 SUBSYSTEM=usb_device SEQNUM=2788 PHYSDEVPATH=/devices/pci0000:00/0000:00:1e.0/0000:02:09.0/usb3/3-2 PHYSDEVBUS=usb PHYSDEVDRIVER=usb MAJOR=189 MINOR=260 UDEVD_EVENT=1 USB_BUS=003 USB_DEV=005 DEVNAME=/dev/bus/usb/003/005 UEVENT[1147418277.041110] add@/devices/pci0000:00/0000:00:1e.0/0000:02:09.0/usb3/3-2/3-2:1.0/host7/target7:0:0/7:0:0:0 ACTION=add DEVPATH=/devices/pci0000:00/0000:00:1e.0/0000:02:09.0/usb3/3-2/3-2:1.0/host7/target7:0:0/7:0:0:0 SUBSYSTEM=scsi SEQNUM=2789 PHYSDEVBUS=scsi UEVENT[1147418277.059661] add@/block/sdc ACTION=add DEVPATH=/block/sdc SUBSYSTEM=block SEQNUM=2790 MINOR=32 MAJOR=8 PHYSDEVPATH=/devices/pci0000:00/0000:00:1e.0/0000:02:09.0/usb3/3-2/3-2:1.0/host7/target7:0:0/7:0:0:0 PHYSDEVBUS=scsi PHYSDEVDRIVER=sd UEVENT[1147418277.092276] add@/block/sdc/sdc1 UDEV [1147418277.092276] add@/devices/pci0000:00/0000:00:1e.0/0000:02:09.0/usb3/3-2/3-2:1.0/host7/target7:0:0/7:0:0:0 UDEV_LOG=3 ACTION=add DEVPATH=/devices/pci0000:00/0000:00:1e.0/0000:02:09.0/usb3/3-2/3-2:1.0/host7/target7:0:0/7:0:0:0 SUBSYSTEM=scsi SEQNUM=2789 PHYSDEVBUS=scsi UDEVD_EVENT=1 UEVENT[1147418277.094937] add@/class/scsi_device/7:0:0:0 ACTION=add DEVPATH=/class/scsi_device/7:0:0:0 SUBSYSTEM=scsi_device SEQNUM=2792 PHYSDEVPATH=/devices/pci0000:00/0000:00:1e.0/0000:02:09.0/usb3/3-2/3-2:1.0/host7/target7:0:0/7:0:0:0 PHYSDEVBUS=scsi PHYSDEVDRIVER=sd UEVENT[1147418277.095001] add@/class/scsi_generic/sg2 ACTION=add DEVPATH=/class/scsi_generic/sg2 SUBSYSTEM=scsi_generic SEQNUM=2793 PHYSDEVPATH=/devices/pci0000:00/0000:00:1e.0/0000:02:09.0/usb3/3-2/3-2:1.0/host7/target7:0:0/7:0:0:0 PHYSDEVBUS=scsi PHYSDEVDRIVER=sd MAJOR=21 MINOR=2 UEVENT[1147418277.095067] add@/devices/pci0000:00/0000:00:1e.0/0000:02:09.0/usb3/3-2/3-2:1.0/host7/target7:0:0/7:0:0:1 ACTION=add DEVPATH=/devices/pci0000:00/0000:00:1e.0/0000:02:09.0/usb3/3-2/3-2:1.0/host7/target7:0:0/7:0:0:1 SUBSYSTEM=scsi SEQNUM=2794 PHYSDEVBUS=scsi UDEV [1147418277.236473] add@/class/scsi_device/7:0:0:0 UDEV_LOG=3 ACTION=add DEVPATH=/class/scsi_device/7:0:0:0 SUBSYSTEM=scsi_device SEQNUM=2792 PHYSDEVPATH=/devices/pci0000:00/0000:00:1e.0/0000:02:09.0/usb3/3-2/3-2:1.0/host7/target7:0:0/7:0:0:0 PHYSDEVBUS=scsi PHYSDEVDRIVER=sd UDEVD_EVENT=1 UDEV [1147418277.306774] add@/class/scsi_generic/sg2 UDEV_LOG=3 ACTION=add DEVPATH=/class/scsi_generic/sg2 SUBSYSTEM=scsi_generic SEQNUM=2793 PHYSDEVPATH=/devices/pci0000:00/0000:00:1e.0/0000:02:09.0/usb3/3-2/3-2:1.0/host7/target7:0:0/7:0:0:0 PHYSDEVBUS=scsi PHYSDEVDRIVER=sd MAJOR=21 MINOR=2 UDEVD_EVENT=1 DEVNAME=/dev/sg2 UDEV [1147418277.347848] add@/block/sdc UDEV_LOG=3 ACTION=add DEVPATH=/block/sdc SUBSYSTEM=block SEQNUM=2790 MINOR=32 MAJOR=8 PHYSDEVPATH=/devices/pci0000:00/0000:00:1e.0/0000:02:09.0/usb3/3-2/3-2:1.0/host7/target7:0:0/7:0:0:0 PHYSDEVBUS=scsi PHYSDEVDRIVER=sd UDEVD_EVENT=1 ID_VENDOR=SCM_Microsystems_Inc. ID_MODEL=eUSB_SmartMedia_._CompactFlash_Adapter ID_REVISION=0208 ID_SERIAL=SCM_Microsystems_Inc._eUSB_SmartMedia_._CompactFlash_Adapter ID_TYPE=generic ID_BUS=usb ID_PATH=usb-SCMMicrosystemsInc-eUSBSmartMediaCompactFlashAdapter:0:0:0 DEVNAME=/dev/sdc DEVLINKS=/dev/disk/by-id/usb-SCM_Microsystems_Inc._eUSB_SmartMedia_._CompactFlash_Adapter /dev/disk/by-path/usb-SCMMicrosystemsInc-eUSBSmartMediaCompactFlashAdapter:0:0:0 UEVENT[1147418277.807824] add@/block/sdd ACTION=add DEVPATH=/block/sdd SUBSYSTEM=block SEQNUM=2795 MINOR=48 MAJOR=8 PHYSDEVPATH=/devices/pci0000:00/0000:00:1e.0/0000:02:09.0/usb3/3-2/3-2:1.0/host7/target7:0:0/7:0:0:1 PHYSDEVBUS=scsi PHYSDEVDRIVER=sd UEVENT[1147418277.807924] add@/class/scsi_device/7:0:0:1 ACTION=add DEVPATH=/class/scsi_device/7:0:0:1 SUBSYSTEM=scsi_device SEQNUM=2796 PHYSDEVPATH=/devices/pci0000:00/0000:00:1e.0/0000:02:09.0/usb3/3-2/3-2:1.0/host7/target7:0:0/7:0:0:1 PHYSDEVBUS=scsi PHYSDEVDRIVER=sd UEVENT[1147418277.808089] add@/class/scsi_generic/sg3 ACTION=add DEVPATH=/class/scsi_generic/sg3 SUBSYSTEM=scsi_generic SEQNUM=2797 PHYSDEVPATH=/devices/pci0000:00/0000:00:1e.0/0000:02:09.0/usb3/3-2/3-2:1.0/host7/target7:0:0/7:0:0:1 PHYSDEVBUS=scsi PHYSDEVDRIVER=sd MAJOR=21 MINOR=3 UDEV [1147418277.827239] add@/devices/pci0000:00/0000:00:1e.0/0000:02:09.0/usb3/3-2/3-2:1.0/host7/target7:0:0/7:0:0:1 UDEV_LOG=3 ACTION=add DEVPATH=/devices/pci0000:00/0000:00:1e.0/0000:02:09.0/usb3/3-2/3-2:1.0/host7/target7:0:0/7:0:0:1 SUBSYSTEM=scsi SEQNUM=2794 PHYSDEVBUS=scsi UDEVD_EVENT=1 UDEV [1147418277.959212] add@/class/scsi_generic/sg3 UDEV_LOG=3 ACTION=add DEVPATH=/class/scsi_generic/sg3 SUBSYSTEM=scsi_generic SEQNUM=2797 PHYSDEVPATH=/devices/pci0000:00/0000:00:1e.0/0000:02:09.0/usb3/3-2/3-2:1.0/host7/target7:0:0/7:0:0:1 PHYSDEVBUS=scsi PHYSDEVDRIVER=sd MAJOR=21 MINOR=3 UDEVD_EVENT=1 DEVNAME=/dev/sg3 UDEV [1147418277.981225] add@/class/scsi_device/7:0:0:1 UDEV_LOG=3 ACTION=add DEVPATH=/class/scsi_device/7:0:0:1 SUBSYSTEM=scsi_device SEQNUM=2796 PHYSDEVPATH=/devices/pci0000:00/0000:00:1e.0/0000:02:09.0/usb3/3-2/3-2:1.0/host7/target7:0:0/7:0:0:1 PHYSDEVBUS=scsi PHYSDEVDRIVER=sd UDEVD_EVENT=1 UDEV [1147418278.125731] add@/block/sdd UDEV_LOG=3 ACTION=add DEVPATH=/block/sdd SUBSYSTEM=block SEQNUM=2795 MINOR=48 MAJOR=8 PHYSDEVPATH=/devices/pci0000:00/0000:00:1e.0/0000:02:09.0/usb3/3-2/3-2:1.0/host7/target7:0:0/7:0:0:1 PHYSDEVBUS=scsi PHYSDEVDRIVER=sd UDEVD_EVENT=1 ID_VENDOR=SCM_Microsystems_Inc. ID_MODEL=eUSB_SmartMedia_._CompactFlash_Adapter ID_REVISION=0208 ID_SERIAL=SCM_Microsystems_Inc._eUSB_SmartMedia_._CompactFlash_Adapter ID_TYPE=generic ID_BUS=usb ID_PATH=usb-SCMMicrosystemsInc-eUSBSmartMediaCompactFlashAdapter:0:0:1 DEVNAME=/dev/sdd DEVLINKS=/dev/disk/by-id/usb-SCM_Microsystems_Inc._eUSB_SmartMedia_._CompactFlash_Adapter /dev/disk/by-path/usb-SCMMicrosystemsInc-eUSBSmartMediaCompactFlashAdapter:0:0:1 Test 2 your instruction ___________________________ Provide /var/log/dmesg ___________________________ [4294667.296000] Linux version 2.6.15-22-386 ([EMAIL PROTECTED]) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Sun May 7 15:49:09 UTC 2006 [4294667.296000] BIOS-provided physical RAM map: [4294667.296000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [4294667.296000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [4294667.296000] BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved) [4294667.296000] BIOS-e820: 0000000000100000 - 000000001ff70000 (usable) [4294667.296000] BIOS-e820: 000000001ff70000 - 000000001ff7c000 (ACPI data) [4294667.296000] BIOS-e820: 000000001ff7c000 - 000000001ff80000 (ACPI NVS) [4294667.296000] BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved) [4294667.296000] BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) [4294667.296000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [4294667.296000] 0MB HIGHMEM available. [4294667.296000] 511MB LOWMEM available. [4294667.296000] On node 0 totalpages: 130928 [4294667.296000] DMA zone: 4096 pages, LIFO batch:0 [4294667.296000] DMA32 zone: 0 pages, LIFO batch:0 [4294667.296000] Normal zone: 126832 pages, LIFO batch:31 [4294667.296000] HighMem zone: 0 pages, LIFO batch:0 [4294667.296000] DMI present. [4294667.296000] ACPI: RSDP (v000 ACER ) @ 0x000f5e80 [4294667.296000] ACPI: RSDT (v001 ACER RSDT 0x20020930 LTP 0x00000000) @ 0x1ff75a7b [4294667.296000] ACPI: FADT (v001 ACER IBIS 0x20020930 PTL 0x0000001e) @ 0x1ff7bf64 [4294667.296000] ACPI: BOOT (v001 ACER IBIS 0x20020930 LTP 0x00000001) @ 0x1ff7bfd8 [4294667.296000] ACPI: DSDT (v001 ACER IBIS 0x20020930 MSFT 0x0100000e) @ 0x00000000 [4294667.296000] ACPI: PM-Timer IO Port: 0x1008 [4294667.296000] Allocating PCI resources starting at 30000000 (gap: 20000000:dfb80000) [4294667.296000] Built 1 zonelists [4294667.296000] Kernel command line: root=/dev/hda1 ro quiet splash [4294667.296000] Local APIC disabled by BIOS (or by default) -- you can enable it with "lapic" [4294667.296000] mapped APIC to ffffd000 (01401000) [4294667.296000] Initializing CPU#0 [4294667.296000] PID hash table entries: 2048 (order: 11, 32768 bytes) [4294667.296000] Detected 2193.209 MHz processor. [4294667.296000] Using pmtmr for high-res timesource [4294667.296000] Console: colour VGA+ 80x25 [4294669.182000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [4294669.183000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [4294669.197000] Memory: 508468k/523712k available (1975k kernel code, 14608k reserved, 607k data, 288k init, 0k highmem) [4294669.197000] Checking if this processor honours the WP bit even in supervisor mode... Ok. [4294669.257000] Calibrating delay using timer specific routine.. 4388.73 BogoMIPS (lpj=2194366) [4294669.257000] Security Framework v1.0.0 initialized [4294669.257000] SELinux: Disabled at boot. [4294669.257000] Mount-cache hash table entries: 512 [4294669.257000] CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000 00000400 00000000 00000000 [4294669.257000] CPU: After vendor identify, caps: bfebf9ff 00000000 00000000 00000000 00000400 00000000 00000000 [4294669.257000] CPU: Trace cache: 12K uops, L1 D cache: 8K [4294669.257000] CPU: L2 cache: 512K [4294669.257000] CPU: After all inits, caps: bfebf9ff 00000000 00000000 00000080 00000400 00000000 00000000 [4294669.257000] mtrr: v2.0 (20020519) [4294669.257000] CPU: Intel Mobile Intel(R) Pentium(R) 4 - M CPU 2.20GHz stepping 07 [4294669.257000] Enabling fast FPU save and restore... done. [4294669.257000] Enabling unmasked SIMD FPU exception support... done. [4294669.257000] Checking 'hlt' instruction... OK. [4294669.261000] checking if image is initramfs... it is [4294669.874000] Freeing initrd memory: 6423k freed [4294669.887000] ACPI: Looking for DSDT ... not found! [4294669.890000] ACPI: setting ELCR to 0200 (from 0420) [4294669.899000] NET: Registered protocol family 16 [4294669.900000] EISA bus registered [4294669.900000] ACPI: bus type pci registered [4294669.900000] PCI: PCI BIOS revision 2.10 entry at 0xfd731, last bus=2 [4294669.900000] PCI: Using configuration type 1 [4294669.901000] ACPI: Subsystem revision 20051216 [4294669.904000] ACPI: Interpreter enabled [4294669.904000] ACPI: Using PIC for interrupt routing [4294669.905000] ACPI: PCI Root Bridge [PCI0] (0000:00) [4294669.905000] PCI: Probing PCI hardware (bus 00) [4294669.909000] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [4294669.909000] PCI quirk: region 1180-11bf claimed by ICH4 GPIO [4294669.909000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 [4294669.909000] Boot video device is 0000:01:00.0 [4294669.910000] PCI: Transparent bridge - 0000:00:1e.0 [4294669.910000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [4294669.912000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [4294669.912000] ACPI: PCI Interrupt Link [LNKA] (IRQs *10) [4294669.913000] ACPI: PCI Interrupt Link [LNKB] (IRQs *10) [4294669.913000] ACPI: PCI Interrupt Link [LNKC] (IRQs *10) [4294669.913000] ACPI: PCI Interrupt Link [LNKD] (IRQs *5) [4294669.914000] ACPI: PCI Interrupt Link [LNKE] (IRQs 10) *0 [4294669.914000] ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled. [4294669.914000] ACPI: PCI Interrupt Link [LNKG] (IRQs 10) *0, disabled. [4294669.914000] ACPI: PCI Interrupt Link [LNKH] (IRQs 10) *0, disabled. [4294669.918000] ACPI: Embedded Controller [EC0] (gpe 29) interrupt mode. [4294669.918000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] [4294669.920000] ACPI: Power Resource [PFN0] (off) [4294669.920000] ACPI: Power Resource [PFN1] (off) [4294669.920000] Linux Plug and Play Support v0.97 (c) Adam Belay [4294669.920000] pnp: PnP ACPI init [4294669.926000] pnp: PnP ACPI: found 11 devices [4294669.926000] PnPBIOS: Disabled by ACPI PNP [4294669.926000] PCI: Using ACPI for IRQ routing [4294669.926000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [4294669.933000] PCI: Bridge: 0000:00:01.0 [4294669.933000] IO window: 3000-3fff [4294669.933000] MEM window: e8100000-e81fffff [4294669.933000] PREFETCH window: f0000000-f7ffffff [4294669.933000] PCI: Bus 3, cardbus bridge: 0000:02:06.0 [4294669.933000] IO window: 00004000-000040ff [4294669.933000] IO window: 00004400-000044ff [4294669.933000] PREFETCH window: 30000000-31ffffff [4294669.933000] MEM window: 36000000-37ffffff [4294669.933000] PCI: Bus 7, cardbus bridge: 0000:02:06.1 [4294669.933000] IO window: 00004800-000048ff [4294669.933000] IO window: 00004c00-00004cff [4294669.933000] PREFETCH window: 32000000-33ffffff [4294669.933000] MEM window: 38000000-39ffffff [4294669.933000] PCI: Bridge: 0000:00:1e.0 [4294669.934000] IO window: 4000-5fff [4294669.934000] MEM window: e8200000-e87fffff [4294669.934000] PREFETCH window: 30000000-34ffffff [4294669.934000] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [4294669.934000] **** SET: Misaligned resource pointer: dfe776c2 Type 07 Len 0 [4294669.934000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 [4294669.934000] PCI: setting IRQ 10 as level-triggered [4294669.934000] ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 [4294669.934000] PCI: Enabling device 0000:02:06.1 (0104 -> 0107) [4294669.934000] ACPI: PCI Interrupt 0000:02:06.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 [4294669.934000] Simple Boot Flag at 0x36 set to 0x1 [4294669.934000] audit: initializing netlink socket (disabled) [4294669.934000] audit(1147416462.933:1): initialized [4294669.934000] VFS: Disk quotas dquot_6.5.1 [4294669.935000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [4294669.935000] Initializing Cryptographic API [4294669.935000] io scheduler noop registered [4294669.935000] io scheduler anticipatory registered [4294669.935000] io scheduler deadline registered [4294669.935000] io scheduler cfq registered [4294669.935000] isapnp: Scanning for PnP cards... [4294670.292000] isapnp: No Plug & Play device found [4294670.310000] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOU2] at 0x60,0x64 irq 1,12 [4294670.314000] serio: i8042 AUX port at 0x60,0x64 irq 12 [4294670.315000] serio: i8042 KBD port at 0x60,0x64 irq 1 [4294670.315000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled [4294670.315000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [4294670.315000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A [4294670.318000] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [4294670.318000] **** SET: Misaligned resource pointer: dfc402c2 Type 07 Len 0 [4294670.318000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 [4294670.318000] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 [4294670.318000] ACPI: PCI interrupt for device 0000:00:1f.6 disabled [4294670.318000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [4294670.319000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [4294670.319000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [4294670.319000] mice: PS/2 mouse device common for all mice [4294670.320000] EISA: Probing bus 0 at eisa.0 [4294670.320000] Cannot allocate resource for EISA slot 1 [4294670.320000] Cannot allocate resource for EISA slot 2 [4294670.320000] Cannot allocate resource for EISA slot 3 [4294670.320000] Cannot allocate resource for EISA slot 4 [4294670.320000] Cannot allocate resource for EISA slot 5 [4294670.320000] EISA: Detected 0 cards. [4294670.320000] NET: Registered protocol family 2 [4294670.329000] IP route cache hash table entries: 8192 (order: 3, 32768 bytes) [4294670.329000] TCP established hash table entries: 32768 (order: 5, 131072 bytes) [4294670.329000] TCP bind hash table entries: 32768 (order: 5, 131072 bytes) [4294670.329000] TCP: Hash tables configured (established 32768 bind 32768) [4294670.329000] TCP reno registered [4294670.329000] TCP bic registered [4294670.329000] NET: Registered protocol family 1 [4294670.329000] NET: Registered protocol family 8 [4294670.329000] NET: Registered protocol family 20 [4294670.329000] Using IPI Shortcut mode [4294670.329000] ACPI wakeup devices: [4294670.329000] MDM0 HUB GLAN USB1 USB2 USB1 [4294670.329000] ACPI: (supports S0 S3 S4 S5) [4294670.329000] Freeing unused kernel memory: 288k freed [4294670.352000] input: AT Translated Set 2 keyboard as /class/input/input0 [4294670.407000] vga16fb: initializing [4294670.407000] vga16fb: mapped to 0xc00a0000 [4294670.548000] Console: switching to colour frame buffer device 80x25 [4294670.548000] fb0: VGA16 VGA frame buffer device [4294671.721000] Capability LSM initialized [4294671.758000] ACPI: Fan [FAN0] (off) [4294671.758000] ACPI: Fan [FAN1] (off) [4294671.763000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [4294671.764000] ACPI: Thermal Zone [THRM] (57 C) [4294672.384000] ICH3M: IDE controller at PCI slot 0000:00:1f.1 [4294672.384000] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) [4294672.384000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 [4294672.384000] ICH3M: chipset revision 2 [4294672.384000] ICH3M: not 100% native mode: will probe irqs later [4294672.384000] ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio [4294672.384000] ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio [4294672.384000] Probing IDE interface ide0... [4294672.648000] hda: TOSHIBA MK4032GAX, ATA DISK drive [4294673.260000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [4294673.285000] Probing IDE interface ide1... [4294673.957000] hdc: QSI CD-RW/DVD-ROM SBW-242, ATAPI CD/DVD-ROM drive [4294674.569000] ide1 at 0x170-0x177,0x376 on irq 15 [4294674.577000] hda: max request size: 1024KiB [4294674.581000] hda: 78140160 sectors (40007 MB), CHS=16383/255/63, UDMA(100) [4294674.587000] hda: cache flushes supported [4294674.587000] hda: hda1 hda2 < hda5 hda6 hda7 hda8 > [4294674.680000] hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) [4294674.680000] Uniform CD-ROM driver Revision: 3.20 [4294674.974000] usbcore: registered new driver usbfs [4294674.974000] usbcore: registered new driver hub [4294674.976000] USB Universal Host Controller Interface driver v2.3 [4294674.976000] PCI: Enabling device 0000:00:1d.0 (0004 -> 0005) [4294674.976000] **** SET: Misaligned resource pointer: dfb8e602 Type 07 Len 0 [4294674.977000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 [4294674.977000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 [4294674.977000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [4294674.977000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [4294674.977000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [4294674.977000] uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001800 [4294674.978000] hub 1-0:1.0: USB hub found [4294674.978000] hub 1-0:1.0: 2 ports detected [4294675.079000] PCI: Enabling device 0000:00:1d.1 (0000 -> 0001) [4294675.079000] **** SET: Misaligned resource pointer: dfb8e302 Type 07 Len 0 [4294675.079000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5 [4294675.079000] PCI: setting IRQ 5 as level-triggered [4294675.079000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5 [4294675.079000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [4294675.079000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [4294675.079000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [4294675.079000] uhci_hcd 0000:00:1d.1: irq 5, io base 0x00001820 [4294675.080000] hub 2-0:1.0: USB hub found [4294675.080000] hub 2-0:1.0: 2 ports detected [4294675.181000] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 [4294675.181000] uhci_hcd 0000:02:09.0: UHCI Host Controller [4294675.181000] uhci_hcd 0000:02:09.0: new USB bus registered, assigned bus number 3 [4294675.181000] uhci_hcd 0000:02:09.0: irq 10, io base 0x00005000 [4294675.181000] hub 3-0:1.0: USB hub found [4294675.181000] hub 3-0:1.0: 2 ports detected [4294675.282000] ACPI: PCI Interrupt 0000:02:09.1[B] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 [4294675.282000] uhci_hcd 0000:02:09.1: UHCI Host Controller [4294675.282000] uhci_hcd 0000:02:09.1: new USB bus registered, assigned bus number 4 [4294675.282000] uhci_hcd 0000:02:09.1: irq 10, io base 0x00005020 [4294675.282000] hub 4-0:1.0: USB hub found [4294675.282000] hub 4-0:1.0: 2 ports detected [4294675.385000] ACPI: PCI Interrupt 0000:02:09.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 [4294675.385000] ehci_hcd 0000:02:09.2: EHCI Host Controller [4294675.386000] ehci_hcd 0000:02:09.2: new USB bus registered, assigned bus number 5 [4294675.386000] ehci_hcd 0000:02:09.2: irq 10, io mem 0xe8208800 [4294675.386000] ehci_hcd 0000:02:09.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004 [4294675.386000] hub 5-0:1.0: USB hub found [4294675.386000] hub 5-0:1.0: 4 ports detected [4294675.387000] usb 2-2: new full speed USB device using uhci_hcd and address 2 [4294675.532000] SCSI subsystem initialized [4294675.534000] Initializing USB Mass Storage driver... [4294675.726000] scsi0 : SCSI emulation for USB Mass Storage devices [4294675.726000] usb-storage: device found at 2 [4294675.726000] usb-storage: waiting for device to settle before scanning [4294675.726000] usbcore: registered new driver usb-storage [4294675.726000] USB Mass Storage support registered. [4294675.787000] Attempting manual resume [4294675.832000] EXT3-fs: mounted filesystem with ordered data mode. [4294675.854000] kjournald starting. Commit interval 5 seconds [4294676.140000] usb 5-2: new high speed USB device using ehci_hcd and address 2 [4294676.257000] scsi1 : SCSI emulation for USB Mass Storage devices [4294676.257000] usb-storage: device found at 2 [4294676.257000] usb-storage: waiting for device to settle before scanning [4294676.773000] usb 4-1: new low speed USB device using uhci_hcd and address 2 [4294677.160000] usb 4-2: new full speed USB device using uhci_hcd and address 3 [4294677.554000] 70 00 E3 00 00 00 00 0B 00 00 00 00 00 FF 00 00 00 00 [4294677.554000] scsi2 : SCSI emulation for USB Mass Storage devices [4294677.554000] usb-storage: device found at 3 [4294677.554000] usb-storage: waiting for device to settle before scanning [4294680.732000] Vendor: Generic Model: Flash R/W Rev: 2002 [4294680.732000] Type: Direct-Access ANSI SCSI revision: 02 [4294680.733000] usb-storage: device scan complete [4294681.258000] Vendor: LEXAR Model: JUMPDRIVE SPORT Rev: 3000 [4294681.258000] Type: Direct-Access ANSI SCSI revision: 00 [4294681.258000] usb-storage: device scan complete [4294682.556000] Vendor: eUSB Model: Compact Flash Rev: [4294682.556000] Type: Direct-Access ANSI SCSI revision: 02 [4294682.556000] Vendor: SCM Micr Model: eUSB SmartMedia Rev: 0208 [4294682.556000] Type: Direct-Access ANSI SCSI revision: 00 [4294682.556000] usb-storage: device scan complete [4294686.725000] Driver 'sd' needs updating - please use bus_type methods [4294686.741000] sd 0:0:0:0: Attached scsi removable disk sda [4294686.745000] SCSI device sdb: 1014784 512-byte hdwr sectors (520 MB) [4294686.746000] sdb: Write Protect is off [4294686.746000] sdb: Mode Sense: 43 00 00 00 [4294686.746000] sdb: assuming drive cache: write through [4294686.749000] SCSI device sdb: 1014784 512-byte hdwr sectors (520 MB) [4294686.751000] sdb: Write Protect is off [4294686.751000] sdb: Mode Sense: 43 00 00 00 [4294686.751000] sdb: assuming drive cache: write through [4294686.751000] sdb: sdb1 [4294686.923000] sd 1:0:0:0: Attached scsi removable disk sdb [4294686.938000] SCSI device sdc: 62976 512-byte hdwr sectors (32 MB) [4294686.943000] sdc: test WP failed, assume Write Enabled [4294686.943000] sdc: assuming drive cache: write through [4294686.959000] SCSI device sdc: 62976 512-byte hdwr sectors (32 MB) [4294686.964000] sdc: test WP failed, assume Write Enabled [4294686.964000] sdc: assuming drive cache: write through [4294686.964000] sdc: sdc1 [4294686.971000] sd 2:0:0:0: Attached scsi removable disk sdc [4294687.075000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294687.307000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294687.540000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294687.676000] sddr09: could not read card info [4294687.684000] sddr09: could not read card info [4294687.685000] sdd: test WP failed, assume Write Enabled [4294687.685000] sdd: assuming drive cache: write through [4294687.685000] sd 2:0:0:1: Attached scsi removable disk sdd [4294687.695000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [4294687.695000] sd 1:0:0:0: Attached scsi generic sg1 type 0 [4294687.695000] sd 2:0:0:0: Attached scsi generic sg2 type 0 [4294687.695000] sd 2:0:0:1: Attached scsi generic sg3 type 0 [4294688.914000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [4294688.939000] Linux agpgart interface v0.101 (c) Dave Jones [4294688.967000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [4294688.969000] agpgart: Detected an Intel i845 Chipset. [4294688.973000] agpgart: AGP aperture is 64M @ 0xec000000 [4294689.227000] Real Time Clock Driver v1.12 [4294689.332000] hw_random: cannot enable RNG, aborting [4294689.817000] Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9d48b1, caps: 0x904713/0x4006 [4294689.823000] input: PC Speaker as /class/input/input1 [4294689.848000] input: SynPS/2 Synaptics TouchPad as /class/input/input2 [4294690.023000] b44.c:v0.97 (Nov 30, 2005) [4294690.023000] ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5 [4294690.027000] eth0: Broadcom 4400 10/100BaseT Ethernet 00:c0:9f:1e:7f:7c [4294690.661000] ts: Compaq touchscreen protocol output [4294690.727000] ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 [4294690.727000] Yenta: CardBus bridge found at 0000:02:06.0 [1025:0020] [4294690.727000] Yenta O2: res at 0x94/0xD4: 00/ea [4294690.727000] Yenta O2: enabling read prefetch/write burst [4294690.781000] parport: PnPBIOS parport detected. [4294690.781000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [4294690.811000] parport0: Printer, Hewlett-Packard HP LaserJet 5L [4294690.850000] Yenta: ISA IRQ mask 0x0818, PCI irq 10 [4294690.850000] Socket status: 30000006 [4294690.850000] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x5fff [4294690.850000] cs: IO port probe 0x4000-0x5fff: clean. [4294690.851000] pcmcia: parent PCI bridge Memory window: 0xe8200000 - 0xe87fffff [4294690.851000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x34ffffff [4294690.890000] ieee1394: Initialized config rom entry `ip1394' [4294691.246000] irda_init() [4294691.246000] NET: Registered protocol family 23 [4294691.330000] nsc_ircc_pnp_probe() : Found cfg_base 0x000 ; firbase 0x2F8 ; irq 3 ; dma 1. [4294691.330000] nsc-ircc, Found chip at base=0x000 [4294691.330000] nsc-ircc, driver loaded (Dag Brattli) [4294691.332000] IrDA: Registered device irda0 [4294691.332000] nsc-ircc, Found dongle: HP HSDL-1100/HSDL-2100 [4294691.332000] nsc-ircc, Found chip at base=0x04e [4294691.332000] nsc-ircc, driver loaded (Dag Brattli) [4294691.332000] nsc_ircc_open(), can't get iobase of 0x2f8 [4294691.357000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 [4294691.357000] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [4294691.917000] intel8x0_measure_ac97_clock: measured 50348 usecs [4294691.917000] intel8x0: clocking to 48000 [4294691.957000] ACPI: PCI Interrupt 0000:02:06.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 [4294691.957000] Yenta: CardBus bridge found at 0000:02:06.1 [1025:0020] [4294692.035000] usbcore: registered new driver hiddev [4294692.079000] Yenta: ISA IRQ mask 0x0810, PCI irq 10 [4294692.079000] Socket status: 30000410 [4294692.079000] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x5fff [4294692.079000] cs: IO port probe 0x4000-0x5fff: clean. [4294692.080000] pcmcia: parent PCI bridge Memory window: 0xe8200000 - 0xe87fffff [4294692.080000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x34ffffff [4294692.105000] input: HID 1241:1177 as /class/input/input3 [4294692.105000] input: USB HID v1.00 Mouse [HID 1241:1177] on usb-0000:02:09.1-1 [4294692.105000] usbcore: registered new driver usbhid [4294692.105000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [4294692.153000] NET: Registered protocol family 17 [4294692.845000] ohci1394: $Rev: 1313 $ Ben Collins <[EMAIL PROTECTED]> [4294692.845000] ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 [4294692.902000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[e8208000-e82087ff] Max Packet=[2048] [4294693.626000] pccard: PCMCIA card inserted into slot 1 [4294693.626000] cs: memory probe 0xe8200000-0xe87fffff: excluding 0xe8200000-0xe825ffff [4294693.641000] pcmcia: registering new device pcmcia1.0 [4294693.733000] cs: IO port probe 0x100-0x3af: clean. [4294693.735000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [4294693.736000] cs: IO port probe 0x820-0x8ff: clean. [4294693.737000] cs: IO port probe 0xc00-0xcf7: clean. [4294693.738000] cs: IO port probe 0xa00-0xaff: clean. [4294693.739000] cs: IO port probe 0x100-0x3af: clean. [4294693.741000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [4294693.742000] cs: IO port probe 0x820-0x8ff: clean. [4294693.743000] cs: IO port probe 0xc00-0xcf7: clean. [4294693.744000] cs: IO port probe 0xa00-0xaff: clean. [4294694.048000] b44: eth0: Link is up at 100 Mbps, full duplex. [4294694.048000] b44: eth0: Flow control is on for TX and on for RX. [4294694.158000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c09f00000bc685] [4294695.185000] NET: Registered protocol family 10 [4294695.185000] lo: Disabled Privacy Extensions [4294695.187000] IPv6 over IPv4 tunneling driver [4294706.101000] eth0: no IPv6 routers present [4294723.124000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294723.354000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294723.584000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294723.814000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294724.044000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294724.274000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294724.409000] sddr09: could not read card info [4294724.417000] sddr09: could not read card info [4294724.417000] sdd: test WP failed, assume Write Enabled [4294724.417000] sdd: assuming drive cache: write through [4294725.526000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294725.756000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294725.986000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294726.216000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294726.446000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294726.678000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294726.813000] sddr09: could not read card info [4294726.821000] sddr09: could not read card info [4294726.821000] sdd: test WP failed, assume Write Enabled [4294726.821000] sdd: assuming drive cache: write through [4294727.931000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294728.161000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294728.391000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294728.621000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294728.851000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294729.081000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294729.216000] sddr09: could not read card info [4294729.224000] sddr09: could not read card info [4294729.224000] sdd: test WP failed, assume Write Enabled [4294729.224000] sdd: assuming drive cache: write through [4294730.333000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294730.563000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294730.793000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294731.023000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294731.253000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294731.483000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294731.618000] sddr09: could not read card info [4294731.626000] sddr09: could not read card info [4294731.626000] sdd: test WP failed, assume Write Enabled [4294731.626000] sdd: assuming drive cache: write through [4294732.735000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294732.965000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294733.195000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294733.427000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294733.658000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294733.888000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294734.023000] sddr09: could not read card info [4294734.031000] sddr09: could not read card info [4294734.031000] sdd: test WP failed, assume Write Enabled [4294734.031000] sdd: assuming drive cache: write through [4294735.141000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294735.371000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294735.601000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294735.831000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294736.061000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294736.291000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294736.426000] sddr09: could not read card info [4294736.434000] sddr09: could not read card info [4294736.434000] sdd: test WP failed, assume Write Enabled [4294736.434000] sdd: assuming drive cache: write through [4294737.543000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294737.773000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294738.003000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294738.233000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294738.463000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294738.693000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294738.828000] sddr09: could not read card info [4294738.836000] sddr09: could not read card info [4294738.836000] sdd: test WP failed, assume Write Enabled [4294738.836000] sdd: assuming drive cache: write through [4294739.946000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294740.178000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294740.409000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294740.639000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294740.869000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294741.099000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294741.234000] sddr09: could not read card info [4294741.242000] sddr09: could not read card info [4294741.242000] sdd: test WP failed, assume Write Enabled [4294741.242000] sdd: assuming drive cache: write through [4294742.352000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294742.582000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294742.812000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294743.042000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294743.272000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294743.502000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294743.636000] sddr09: could not read card info [4294743.644000] sddr09: could not read card info [4294743.644000] sdd: test WP failed, assume Write Enabled [4294743.644000] sdd: assuming drive cache: write through [4294744.753000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294744.983000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294745.213000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294745.443000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294745.673000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294745.903000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294746.038000] sddr09: could not read card info [4294746.046000] sddr09: could not read card info [4294746.046000] sdd: test WP failed, assume Write Enabled [4294746.046000] sdd: assuming drive cache: write through [4294747.157000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294747.387000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294747.617000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294747.847000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294748.077000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294748.307000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294748.442000] sddr09: could not read card info [4294748.450000] sddr09: could not read card info [4294748.450000] sdd: test WP failed, assume Write Enabled [4294748.450000] sdd: assuming drive cache: write through [4294749.560000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294749.790000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294750.020000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294750.250000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294750.480000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294750.710000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294750.845000] sddr09: could not read card info [4294750.853000] sddr09: could not read card info [4294750.853000] sdd: test WP failed, assume Write Enabled [4294750.853000] sdd: assuming drive cache: write through [4294751.962000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294752.192000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294752.422000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294752.652000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294752.882000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294753.112000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294753.249000] sddr09: could not read card info [4294753.257000] sddr09: could not read card info [4294753.257000] sdd: test WP failed, assume Write Enabled [4294753.257000] sdd: assuming drive cache: write through [4294754.367000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294754.597000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294754.827000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294755.057000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294755.287000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294755.517000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294755.652000] sddr09: could not read card info [4294755.660000] sddr09: could not read card info [4294755.660000] sdd: test WP failed, assume Write Enabled [4294755.660000] sdd: assuming drive cache: write through [4294756.769000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294756.999000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294757.229000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294757.459000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294757.689000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294757.919000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294758.054000] sddr09: could not read card info [4294758.062000] sddr09: could not read card info [4294758.062000] sdd: test WP failed, assume Write Enabled [4294758.062000] sdd: assuming drive cache: write through [4294759.171000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294759.401000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294759.631000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294759.860000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294760.093000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294760.326000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294760.461000] sddr09: could not read card info [4294760.469000] sddr09: could not read card info [4294760.469000] sdd: test WP failed, assume Write Enabled [4294760.469000] sdd: assuming drive cache: write through [4294761.579000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294761.809000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294762.039000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294762.269000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294762.499000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294762.729000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294762.864000] sddr09: could not read card info [4294762.872000] sddr09: could not read card info [4294762.872000] sdd: test WP failed, assume Write Enabled [4294762.872000] sdd: assuming drive cache: write through [4294763.981000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294764.211000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294764.441000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294764.671000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294764.901000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294765.131000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294765.265000] sddr09: could not read card info [4294765.273000] sddr09: could not read card info [4294765.273000] sdd: test WP failed, assume Write Enabled [4294765.273000] sdd: assuming drive cache: write through [4294766.382000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294766.487000] usb 5-2: USB disconnect, address 2 [4294766.614000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294766.847000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294767.078000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294767.308000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294767.538000] usb 4-2: reset full speed USB device using uhci_hcd and address 3 [4294767.753000] usb 4-2: USB disconnect, address 3 [4294767.757000] 2:0:0:1: rejecting I/O to dead device [4294767.757000] 2:0:0:1: rejecting I/O to dead device [4294767.757000] 2:0:0:1: rejecting I/O to dead device [4294767.757000] sdd : READ CAPACITY failed. [4294767.757000] sdd : status=0, message=00, host=1, driver=00 [4294767.757000] sdd : sense not available. [4294767.757000] 2:0:0:1: rejecting I/O to dead device [4294767.757000] sdd: Write Protect is off [4294767.757000] sdd: Mode Sense: 00 00 00 00 [4294767.757000] sdd: assuming drive cache: write through [4294767.757000] 2:0:0:1: rejecting I/O to dead device [4294767.757000] 2:0:0:1: rejecting I/O to dead device [4294767.757000] 2:0:0:1: rejecting I/O to dead device [4294767.757000] 2:0:0:1: rejecting I/O to dead device [4294767.757000] 2:0:0:1: rejecting I/O to dead device [4294767.757000] sdd : READ CAPACITY failed. [4294767.757000] sdd : status=0, message=00, host=1, driver=00 [4294767.757000] sdd : sense not available. [4294767.757000] 2:0:0:1: rejecting I/O to dead device [4294767.757000] sdd: Write Protect is off [4294767.757000] sdd: Mode Sense: 00 00 00 00 [4294767.757000] sdd: assuming drive cache: write through [4294767.757000] sdd:<3> 2:0:0:1: rejecting I/O to dead device [4294767.757000] Buffer I/O error on device sdd, logical block 0 [4294767.757000] 2:0:0:1: rejecting I/O to dead device [4294767.757000] Buffer I/O error on device sdd, logical block 0 [4294767.757000] unable to read partition table [4294767.757000] 2:0:0:1: rejecting I/O to dead device [4294767.757000] Buffer I/O error on device sdd, logical block 0 [4294767.757000] Buffer I/O error on device sdd, logical block 1 [4294767.757000] Buffer I/O error on device sdd, logical block 2 [4294767.757000] Buffer I/O error on device sdd, logical block 3 [4294767.757000] Buffer I/O error on device sdd, logical block 4 [4294767.757000] Buffer I/O error on device sdd, logical block 5 [4294767.757000] Buffer I/O error on device sdd, logical block 6 [4294767.757000] Buffer I/O error on device sdd, logical block 7 [4294767.758000] 2:0:0:1: rejecting I/O to dead device [4294770.145000] lp0: using parport0 (interrupt-driven). [4294770.194000] sbp2: $Rev: 1306 $ Ben Collins <[EMAIL PROTECTED]> [4294770.194000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) [4294770.194000] ieee1394: sbp2: Try serialize_io=0 for better performance [4294770.277000] Adding 795144k swap on /dev/hda8. Priority:-1 extents:1 across:795144k [4294770.431000] EXT3 FS on hda1, internal journal [4294770.648000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 [4294770.648000] md: bitmap version 4.39 [4294771.234000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: [EMAIL PROTECTED] [4294772.171000] cdrom: open failed. [4294772.764000] kjournald starting. Commit interval 5 seconds [4294772.765000] EXT3 FS on hda5, internal journal [4294772.765000] EXT3-fs: mounted filesystem with ordered data mode. [4294772.766000] kjournald starting. Commit interval 5 seconds [4294772.766000] EXT3 FS on hda6, internal journal [4294772.766000] EXT3-fs: mounted filesystem with ordered data mode. [4294772.767000] kjournald starting. Commit interval 5 seconds [4294772.768000] EXT3 FS on hda7, internal journal [4294772.768000] EXT3-fs: mounted filesystem with ordered data mode. thanks for your help dominique France -- dane-elec eUSB compact flash +smart detected but unmontable https://launchpad.net/bugs/42924 -- desktop-bugs mailing list desktop-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/desktop-bugs