Please find attached the required logfiles.

Bjorn Ramberg

p3net wrote:
> As per [ 18.928000] A Prism2.5 PCI device found, phymem:0xd4006000,
> irq:17, mem:0xf8a2e000, it looks like your wireless card is being
> detected. Please go ahead and follow the directions here
> <https://wiki.ubuntu.com/DebuggingHardwareDetection> so that we can
> gather the appropriate logfiles to confirm the bug.
>
>   


[    0.000000] Linux version 2.6.20-16-generic ([EMAIL PROTECTED]) (gcc version 
4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Thu Jun 7 20:19:32 UTC 2007 (Ubuntu 
2.6.20-16.29-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] sanitize start
[    0.000000] sanitize end
[    0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f400 
end: 000000000009f400 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000000009f400 size: 0000000000000c00 
end: 00000000000a0000 type: 2
[    0.000000] copy_e820_map() start: 00000000000dc000 size: 0000000000004000 
end: 00000000000e0000 type: 2
[    0.000000] copy_e820_map() start: 00000000000e4000 size: 000000000001c000 
end: 0000000000100000 type: 2
[    0.000000] copy_e820_map() start: 0000000000100000 size: 000000003fcf0000 
end: 000000003fdf0000 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000003fdf0000 size: 000000000000b000 
end: 000000003fdfb000 type: 3
[    0.000000] copy_e820_map() start: 000000003fdfb000 size: 0000000000005000 
end: 000000003fe00000 type: 4
[    0.000000] copy_e820_map() start: 000000003fe00000 size: 0000000000200000 
end: 0000000040000000 type: 2
[    0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 
end: 00000000fec10000 type: 2
[    0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 
end: 00000000fee01000 type: 2
[    0.000000] copy_e820_map() start: 00000000fff80000 size: 0000000000080000 
end: 0000000100000000 type: 2
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[    0.000000]  BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003fdf0000 (usable)
[    0.000000]  BIOS-e820: 000000003fdf0000 - 000000003fdfb000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003fdfb000 - 000000003fe00000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003fe00000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] 125MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] found SMP MP-table at 000f7b20
[    0.000000] Entering add_active_range(0, 0, 261616) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   261616
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   261616
[    0.000000] On node 0 totalpages: 261616
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 251 pages used for memmap
[    0.000000]   HighMem zone: 31989 pages, LIFO batch:7
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP (v000 SONY                                  ) @ 
0x000f7af0
[    0.000000] ACPI: RSDT (v001   SONY       F0 0x20030512 PTL  0x00000000) @ 
0x3fdf6ebf
[    0.000000] ACPI: FADT (v001   SONY       F0 0x20030512 PTL  0x01000000) @ 
0x3fdfaf3c
[    0.000000] ACPI: MADT (v001   SONY       F0 0x20030512 PTL  0x00000000) @ 
0x3fdfafb0
[    0.000000] ACPI: DSDT (v001   SONY       F0 0x20030512 PTL  0x0100000e) @ 
0x00000000
[    0.000000] ACPI: PM-Timer IO Port: 0x8008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:2 APIC version 20
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 16 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 
40000000:bec00000)
[    0.000000] Detected 2806.494 MHz processor.
[   19.627307] Built 1 zonelists.  Total pages: 259573
[   19.627314] Kernel command line: 
root=UUID=6a669df8-dcb0-431e-bfef-c57c932c0c23 ro quiet splash
[   19.627473] mapped APIC to ffffd000 (fee00000)
[   19.627475] mapped IOAPIC to ffffc000 (fec00000)
[   19.627479] Enabling fast FPU save and restore... done.
[   19.627483] Enabling unmasked SIMD FPU exception support... done.
[   19.627494] Initializing CPU#0
[   19.627587] PID hash table entries: 4096 (order: 12, 16384 bytes)
[   19.628969] Console: colour VGA+ 80x25
[   19.629814] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   19.630617] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   19.658052] Memory: 1026264k/1046464k available (1992k kernel code, 19460k 
reserved, 900k data, 328k init, 128960k highmem)
[   19.658064] virtual kernel memory layout:
[   19.658065]     fixmap  : 0xfff4e000 - 0xfffff000   ( 708 kB)
[   19.658066]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   19.658067]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   19.658068]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   19.658069]       .init : 0xc03d9000 - 0xc042b000   ( 328 kB)
[   19.658070]       .data : 0xc02f2374 - 0xc03d36d4   ( 900 kB)
[   19.658071]       .text : 0xc0100000 - 0xc02f2374   (1992 kB)
[   19.658074] Checking if this processor honours the WP bit even in supervisor 
mode... Ok.
[   19.735336] Calibrating delay using timer specific routine.. 5616.86 
BogoMIPS (lpj=11233720)
[   19.735392] Security Framework v1.0.0 initialized
[   19.735406] SELinux:  Disabled at boot.
[   19.735425] Mount-cache hash table entries: 512
[   19.735639] CPU: After generic identify, caps: bfebfbff 00000000 00000000 
00000000 00004400 00000000 00000000
[   19.735652] CPU: Trace cache: 12K uops, L1 D cache: 8K
[   19.735655] CPU: L2 cache: 512K
[   19.735657] CPU: Hyper-Threading is disabled
[   19.735660] CPU: After all inits, caps: bfebfbff 00000000 00000000 00003080 
00004400 00000000 00000000
[   19.735674] Compat vDSO mapped to ffffe000.
[   19.735679] Remapping vsyscall page to ffffe000
[   19.735695] Checking 'hlt' instruction... OK.
[   19.751463] SMP alternatives: switching to UP code
[   19.751810] Freeing SMP alternatives: 11k freed
[   19.752042] Early unpacking initramfs... done
[   20.026515] ACPI: Core revision 20060707
[   20.028407] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, 
using machine DSDT.
[   20.034033] CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 07
[   20.034077] Total of 1 processors activated (5616.86 BogoMIPS).
[   20.034179] ENABLING IO-APIC IRQs
[   20.034365] ..TIMER: vector=0x31 apic1=0 pin1=16 apic2=-1 pin2=-1
[   20.073987] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[   20.074033] ...trying to set up timer (IRQ0) through the 8259A ...  failed.
[   20.074036] ...trying to set up timer as Virtual Wire IRQ... works.
[   20.218236] Brought up 1 CPUs
[   20.218494] Booting paravirtualized kernel on bare hardware
[   20.218578] Time: 12:37:31  Date: 05/22/107
[   20.218610] NET: Registered protocol family 16
[   20.218726] EISA bus registered
[   20.218732] ACPI: bus type pci registered
[   20.225303] PCI: PCI BIOS revision 2.10 entry at 0xfd996, last bus=1
[   20.225305] PCI: Using configuration type 1
[   20.225307] Setting up standard PCI resources
[   20.238465] ACPI: Interpreter enabled
[   20.238469] ACPI: Using IOAPIC for interrupt routing
[   20.238895] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   20.238902] PCI: Probing PCI hardware (bus 00)
[   20.239296] Enabling SiS 96x SMBus.
[   20.240432] Boot video device is 0000:01:00.0
[   20.240634] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   20.252251] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11)
[   20.252475] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11) *0, 
disabled.
[   20.252673] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11) *0, 
disabled.
[   20.252868] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11)
[   20.253083] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11)
[   20.253277] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11)
[   20.253475] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11) *0, 
disabled.
[   20.253672] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11) *0, 
disabled.
[   20.253752] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[   20.281355] Linux Plug and Play Support v0.97 (c) Adam Belay
[   20.281370] pnp: PnP ACPI init
[   20.320213] pnp: PnP ACPI: found 11 devices
[   20.320219] PnPBIOS: Disabled by ACPI PNP
[   20.320279] PCI: Using ACPI for IRQ routing
[   20.320283] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, 
post a report
[   20.325948] NET: Registered protocol family 8
[   20.325950] NET: Registered protocol family 20
[   20.326063] pnp: 00:04: ioport range 0x8000-0x808f could not be reserved
[   20.326066] pnp: 00:04: ioport range 0x8090-0x80ff has been reserved
[   20.326069] pnp: 00:04: ioport range 0x8100-0x811f has been reserved
[   20.326071] pnp: 00:04: ioport range 0x4d0-0x4d1 has been reserved
[   20.326074] pnp: 00:04: ioport range 0xfe00-0xfe00 has been reserved
[   20.326417] PCI: Failed to allocate mem resource #6:[EMAIL PROTECTED] for 
0000:01:00.0
[   20.326468] PCI: Bridge: 0000:00:01.0
[   20.326469]   IO window: disabled.
[   20.326477]   MEM window: d5000000-d5ffffff
[   20.326484]   PREFETCH window: e0000000-efffffff
[   20.326493] PCI: Bus 2, cardbus bridge: 0000:00:0a.0
[   20.326495]   IO window: 00002400-000024ff
[   20.326501]   IO window: 00002800-000028ff
[   20.326507]   PREFETCH window: 50000000-53ffffff
[   20.326513]   MEM window: 54000000-57ffffff
[   20.326520] PCI: Bus 6, cardbus bridge: 0000:00:0a.1
[   20.326522]   IO window: 00002c00-00002cff
[   20.326528]   IO window: 00003000-000030ff
[   20.326534]   PREFETCH window: 58000000-5bffffff
[   20.326540]   MEM window: 5c000000-5fffffff
[   20.326574] PCI: Enabling device 0000:00:0a.0 (0000 -> 0003)
[   20.326587] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> 
IRQ 16
[   20.326611] PCI: Enabling device 0000:00:0a.1 (0000 -> 0003)
[   20.326615] ACPI: PCI Interrupt 0000:00:0a.1[A] -> GSI 17 (level, low) -> 
IRQ 16
[   20.326653] NET: Registered protocol family 2
[   20.365931] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   20.366170] TCP established hash table entries: 131072 (order: 8, 1048576 
bytes)
[   20.367223] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   20.368142] TCP: Hash tables configured (established 131072 bind 65536)
[   20.368149] TCP reno registered
[   20.378027] checking if image is initramfs... it is
[   20.925378] Freeing initrd memory: 6771k freed
[   20.925929] audit: initializing netlink socket (disabled)
[   20.925950] audit(1182515851.324:1): initialized
[   20.926051] highmem bounce pool size: 64 pages
[   20.926119] VFS: Disk quotas dquot_6.5.1
[   20.926143] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   20.926208] io scheduler noop registered
[   20.926211] io scheduler anticipatory registered
[   20.926214] io scheduler deadline registered
[   20.926222] io scheduler cfq registered (default)
[   20.926531] isapnp: Scanning for PnP cards...
[   21.279468] isapnp: No Plug & Play device found
[   21.309117] Real Time Clock Driver v1.12ac
[   21.309177] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing 
enabled
[   21.309302] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   21.310258] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   21.310526] PCI: Enabling device 0000:00:02.6 (0000 -> 0001)
[   21.310542] ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> 
IRQ 17
[   21.310550] ACPI: PCI interrupt for device 0000:00:02.6 disabled
[   21.310635] mice: PS/2 mouse device common for all mice
[   21.311251] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 
blocksize
[   21.311547] input: Macintosh mouse button emulation as /class/input/input0
[   21.311644] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   21.311649] ide: Assuming 33MHz system bus speed for PIO modes; override 
with idebus=xx
[   21.311927] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 
1,12
[   21.315085] serio: i8042 KBD port at 0x60,0x64 irq 1
[   21.315093] serio: i8042 AUX port at 0x60,0x64 irq 12
[   21.315302] EISA: Probing bus 0 at eisa.0
[   21.315312] Cannot allocate resource for EISA slot 1
[   21.315314] Cannot allocate resource for EISA slot 2
[   21.315316] Cannot allocate resource for EISA slot 3
[   21.315331] Cannot allocate resource for EISA slot 8
[   21.315333] EISA: Detected 0 cards.
[   21.345374] TCP cubic registered
[   21.345383] NET: Registered protocol family 1
[   21.345412] Using IPI No-Shortcut mode
[   21.345490] ACPI: (supports S0 S3 S4 S5)
[   21.345531]   Magic number: 11:505:633
[   21.345643]   hash matches device ptycc
[   21.346166] Freeing unused kernel memory: 328k freed
[   21.347512] Time: tsc clocksource has been installed.
[   21.359120] input: AT Translated Set 2 keyboard as /class/input/input1
[   22.597058] Capability LSM initialized
[   22.641778] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C2])
[    2.860000] ACPI: Thermal Zone [ATF0] (42 C)
[    2.868000] Time: acpi_pm clocksource has been installed.
[    3.488000] usbcore: registered new interface driver usbfs
[    3.488000] usbcore: registered new interface driver hub
[    3.488000] usbcore: registered new device driver usb
[    3.488000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) 
Driver
[    3.488000] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> 
IRQ 18
[    3.488000] ohci_hcd 0000:00:03.0: OHCI Host Controller
[    3.488000] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus 
number 1
[    3.488000] ohci_hcd 0000:00:03.0: irq 18, io mem 0xd4000000
[    3.520000] sis900.c: v1.08.10 Apr. 2 2006
[    3.572000] ieee1394: Initialized config rom entry `ip1394'
[    3.576000] usb usb1: configuration #1 chosen from 1 choice
[    3.576000] hub 1-0:1.0: USB hub found
[    3.576000] hub 1-0:1.0: 2 ports detected
[    3.684000] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> 
IRQ 19
[    3.684000] ohci_hcd 0000:00:03.1: OHCI Host Controller
[    3.684000] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus 
number 2
[    3.684000] ohci_hcd 0000:00:03.1: irq 19, io mem 0xd4001000
[    3.748000] usb usb2: configuration #1 chosen from 1 choice
[    3.748000] hub 2-0:1.0: USB hub found
[    3.748000] hub 2-0:1.0: 2 ports detected
[    3.856000] PCI: Enabling device 0000:00:03.2 (0010 -> 0012)
[    3.856000] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> 
IRQ 20
[    3.856000] ohci_hcd 0000:00:03.2: OHCI Host Controller
[    3.856000] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus 
number 3
[    3.856000] ohci_hcd 0000:00:03.2: irq 20, io mem 0xd4002000
[    3.920000] usb usb3: configuration #1 chosen from 1 choice
[    3.920000] hub 3-0:1.0: USB hub found
[    3.920000] hub 3-0:1.0: 2 ports detected
[    3.988000] usb 1-1: new low speed USB device using ohci_hcd and address 2
[    4.028000] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> 
IRQ 21
[    4.028000] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
[    4.036000] 0000:00:04.0: Using transceiver found at address 1 as default
[    4.040000] eth0: SiS 900 PCI Fast Ethernet at 0x2000, IRQ 21, 
08:00:46:b4:51:52.
[    4.040000] SIS5513: IDE controller at PCI slot 0000:00:02.5
[    4.040000] SIS5513: chipset revision 0
[    4.040000] SIS5513: not 100% native mode: will probe irqs later
[    4.040000] SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
[    4.040000]     ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:DMA, 
hdb:pio
[    4.040000]     ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:DMA, 
hdd:pio
[    4.040000] Probing IDE interface ide0...
[    4.192000] usb 1-1: configuration #1 chosen from 1 choice
[    4.332000] hda: WDC WD800VE-00HDT0, ATA DISK drive
[    4.500000] usb 3-2: new full speed USB device using ohci_hcd and address 2
[    4.672000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    4.708000] usb 3-2: configuration #1 chosen from 1 choice
[    4.712000] usbcore: registered new interface driver hiddev
[    4.716000] input: HID 062a:0000 as /class/input/input2
[    4.716000] input: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:03.0-1
[    4.716000] usbcore: registered new interface driver usbhid
[    4.716000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[    4.724000] usbcore: registered new interface driver libusual
[    4.732000] SCSI subsystem initialized
[    4.732000] Initializing USB Mass Storage driver...
[    4.732000] scsi0 : SCSI emulation for USB Mass Storage devices
[    4.732000] usbcore: registered new interface driver usb-storage
[    4.732000] USB Mass Storage support registered.
[    4.732000] usb-storage: device found at 2
[    4.732000] usb-storage: waiting for device to settle before scanning
[    4.952000] Probing IDE interface ide1...
[    5.692000] hdc: SONY DVD RW DW-U50A, ATAPI CD/DVD-ROM drive
[    6.032000] ide1 at 0x170-0x177,0x376 on irq 15
[    6.044000] libata version 2.20 loaded.
[    6.048000] ACPI: PCI Interrupt 0000:00:0a.2[A] -> GSI 17 (level, low) -> 
IRQ 16
[    6.104000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16]  
MMIO=[d4005000-d40057ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[    6.112000] PCI: Enabling device 0000:00:03.3 (0000 -> 0002)
[    6.112000] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> 
IRQ 22
[    6.112000] ehci_hcd 0000:00:03.3: EHCI Host Controller
[    6.112000] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus 
number 4
[    6.112000] PCI: cache line size of 128 is not supported by device 
0000:00:03.3
[    6.112000] ehci_hcd 0000:00:03.3: irq 22, io mem 0xd4003000
[    6.112000] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 
2004
[    6.112000] usb 3-2: USB disconnect, address 2
[    6.112000] usb usb4: configuration #1 chosen from 1 choice
[    6.112000] hub 4-0:1.0: USB hub found
[    6.112000] hub 4-0:1.0: 6 ports detected
[    6.120000] hda: max request size: 128KiB
[    6.120000] hda: 156301488 sectors (80026 MB) w/8192KiB Cache, 
CHS=65535/16/63, UDMA(100)
[    6.128000] hda: cache flushes supported
[    6.128000]  hda:<6>usb 1-1: USB disconnect, address 2
[    6.420000]  hda1 hda2 hda3 hda4
[    6.464000] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, 
UDMA(33)
[    6.464000] Uniform CD-ROM driver Revision: 3.20
[    6.852000] Attempting manual resume
[    6.852000] swsusp: Resume From Partition 3:3
[    6.852000] PM: Checking swsusp image.
[    6.852000] PM: Resume from disk failed.
[    6.896000] kjournald starting.  Commit interval 5 seconds
[    6.896000] EXT3-fs: mounted filesystem with ordered data mode.
[    7.044000] usb 1-1: new low speed USB device using ohci_hcd and address 3
[    7.240000] usb 1-1: configuration #1 chosen from 1 choice
[    7.252000] input: HID 062a:0000 as /class/input/input3
[    7.252000] input: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:03.0-1
[    7.392000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[080046030178cf57]
[    7.556000] usb 3-2: new full speed USB device using ohci_hcd and address 3
[    7.764000] usb 3-2: configuration #1 chosen from 1 choice
[    7.764000] scsi1 : SCSI emulation for USB Mass Storage devices
[    7.764000] usb-storage: device found at 3
[    7.764000] usb-storage: waiting for device to settle before scanning
[   12.764000] usb-storage: device scan complete
[   12.772000] scsi 1:0:0:0: Direct-Access     Sony     MSC-U03          2.00 
PQ: 0 ANSI: 0 CCS
[   17.348000] NET: Registered protocol family 10
[   17.348000] lo: Disabled Privacy Extensions
[   19.044000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   19.048000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   19.052000] Linux agpgart interface v0.102 (c) Dave Jones
[   19.068000] agpgart: Detected SiS 648 chipset
[   19.072000] eth0: Media Link On 100mbps full-duplex 
[   19.072000] agpgart: AGP aperture is 64M @ 0xd0000000
[   19.124000] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x8100
[   19.272000] Yenta: CardBus bridge found at 0000:00:0a.0 [104d:814e]
[   19.416000] Yenta: ISA IRQ mask 0x04b8, PCI irq 16
[   19.416000] Socket status: 30000006
[   19.416000] Yenta: CardBus bridge found at 0000:00:0a.1 [104d:814e]
[   19.548000] Yenta: ISA IRQ mask 0x04b8, PCI irq 16
[   19.548000] Socket status: 30000006
[   19.588000] prism2pci_init: prism2_pci.o: 0.2.5 Loaded
[   19.588000] PCI: Enabling device 0000:00:07.0 (0014 -> 0016)
[   19.588000] ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 18 (level, low) -> 
IRQ 17
[   19.588000] A Prism2.5 PCI device found, phymem:0xd4006000, irq:17, 
mem:0xf8ad2000
[   20.528000] input: PS/2 Mouse as /class/input/input4
[   20.548000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input5
[   20.756000] input: PC Speaker as /class/input/input6
[   20.876000] parport: PnPBIOS parport detected.
[   20.876000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 
[PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   20.908000] ieee80211_crypt: registered algorithm 'NULL'
[   20.940000] hostap_pci: 0.4.4-kernel (Jouni Malinen <[EMAIL PROTECTED]>)
[   20.976000] orinoco 0.15 (David Gibson <[EMAIL PROTECTED]>, Pavel Roskin 
<[EMAIL PROTECTED]>, et al)
[   20.976000] orinoco_pci 0.15 (Pavel Roskin <[EMAIL PROTECTED]>, David Gibson 
<[EMAIL PROTECTED]> & Jean Tourrilhes <[EMAIL PROTECTED]>)
[   21.184000] sd 1:0:0:0: Attached scsi removable disk sda
[   21.272000] sd 1:0:0:0: Attached scsi generic sg0 type 0
[   21.292000] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> 
IRQ 17
[   21.896000] cs: IO port probe 0x100-0x3af: clean.
[   21.900000] cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f
[   21.900000] cs: IO port probe 0x820-0x8ff: clean.
[   21.900000] cs: IO port probe 0xc00-0xcf7: clean.
[   21.900000] cs: IO port probe 0xa00-0xaff: clean.
[   21.904000] cs: IO port probe 0x100-0x3af: clean.
[   21.904000] cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f
[   21.904000] cs: IO port probe 0x820-0x8ff: clean.
[   21.904000] cs: IO port probe 0xc00-0xcf7: clean.
[   21.908000] cs: IO port probe 0xa00-0xaff: clean.
[   22.116000] intel8x0_measure_ac97_clock: measured 55466 usecs
[   22.116000] intel8x0: clocking to 48000
[   22.248000] fuse init (API version 7.8)
[   22.272000] lp0: using parport0 (interrupt-driven).
[   22.340000] Adding 2097136k swap on 
/dev/disk/by-uuid/b86ac0e5-92d4-42f5-8254-68447b147a04.  Priority:-1 extents:1 
across:2097136k
[   22.572000] EXT3 FS on hda2, internal journal
[   23.520000] NTFS driver 2.1.28 [Flags: R/O MODULE].
[   23.572000] NTFS volume version 3.1.
[   25.332000] NET: Registered protocol family 17
[   28.148000] eth0: no IPv6 routers present
[   28.600000] ACPI: Video Device [VID0] (multi-head: yes  rom: no  post: no)
[   28.616000] ACPI: Battery Slot [BAT1] (battery present)
[   28.616000] ACPI: Battery Slot [BAT2] (battery absent)
[   28.648000] ACPI: AC Adapter [ACAD] (on-line)
[   28.704000] input: Lid Switch as /class/input/input7
[   28.712000] ACPI: Lid Switch [LID]
[   28.744000] input: Power Button (CM) as /class/input/input8
[   28.748000] ACPI: Power Button (CM) [PWRB]
[   28.764000] No dock devices found.
[   28.776000] Using specific hotkey driver
[   28.812000] ibm_acpi: ec object not found
[   28.896000] pcc_acpi: loading...
[   28.932000] ACPI Sony Notebook Control Driver v0.2 successfully installed
[   34.388000] ppdev: user-space parallel port driver
[   35.172000] apm: BIOS not found.
[   35.252000] sonypi: Sony Programmable I/O Controller Driver v1.26.
[   35.372000] Bluetooth: Core ver 2.11
[   35.372000] NET: Registered protocol family 31
[   35.372000] Bluetooth: HCI device and connection manager initialized
[   35.372000] Bluetooth: HCI socket layer initialized
[   35.412000] Bluetooth: L2CAP ver 2.8
[   35.412000] Bluetooth: L2CAP socket layer initialized
[   35.496000] Bluetooth: RFCOMM socket layer initialized
[   35.496000] Bluetooth: RFCOMM TTY layer initialized
[   35.496000] Bluetooth: RFCOMM ver 1.8
[   64.964000] usb 1-1: USB disconnect, address 3
[   88.412000] usb 1-1: new low speed USB device using ohci_hcd and address 4
[   88.620000] usb 1-1: configuration #1 chosen from 1 choice
[   88.632000] input: USB Mouse as /class/input/input9
[   88.632000] input: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:03.0-1

00:00.0 Host bridge: Silicon Integrated Systems [SiS] 645xx (rev 03)
        Subsystem: Sony Corporation Unknown device 814e
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ >SERR- <PERR-
        Latency: 32
        Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=64M]
        Capabilities: <access denied>

00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SG86C202 (prog-if 00 
[Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 99
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=86
        Memory behind bridge: d5000000-d5ffffff
        Prefetchable memory behind bridge: e0000000-efffffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-

00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] 
(rev 14)
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0

00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin B routed to IRQ 0
        Region 4: I/O ports at 8100 [size=32]

00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (prog-if 80 
[Master])
        Subsystem: Sony Corporation Unknown device 814e
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 128
        Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) 
[disabled] [size=8]
        Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) 
[disabled] [size=1]
        Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) 
[disabled] [size=8]
        Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) 
[disabled] [size=1]
        Region 4: I/O ports at 1000 [size=16]

00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0) 
(prog-if 00 [Generic])
        Subsystem: Sony Corporation Unknown device 814e
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin C routed to IRQ 17
        Region 0: I/O ports at 1800 [size=256]
        Region 1: I/O ports at 1400 [size=128]
        Capabilities: <access denied>

00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 
Sound Controller (rev a0)
        Subsystem: Sony Corporation Unknown device 814e
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 173 (13000ns min, 2750ns max)
        Interrupt: pin C routed to IRQ 17
        Region 0: I/O ports at 1c00 [size=256]
        Region 1: I/O ports at 1480 [size=128]
        Capabilities: <access denied>

00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller 
(rev 0f) (prog-if 10 [OHCI])
        Subsystem: Sony Corporation Unknown device 814e
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (20000ns max)
        Interrupt: pin A routed to IRQ 18
        Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=4K]

00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller 
(rev 0f) (prog-if 10 [OHCI])
        Subsystem: Sony Corporation Unknown device 814e
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (20000ns max)
        Interrupt: pin B routed to IRQ 19
        Region 0: Memory at d4001000 (32-bit, non-prefetchable) [size=4K]

00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller 
(rev 0f) (prog-if 10 [OHCI])
        Subsystem: Sony Corporation Unknown device 814e
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (20000ns max)
        Interrupt: pin C routed to IRQ 20
        Region 0: Memory at d4002000 (32-bit, non-prefetchable) [size=4K]

00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller 
(prog-if 20 [EHCI])
        Subsystem: Sony Corporation Unknown device 814e
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (20000ns max)
        Interrupt: pin D routed to IRQ 22
        Region 0: Memory at d4003000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>

00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast 
Ethernet (rev 90)
        Subsystem: Sony Corporation Unknown device 814e
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 173 (13000ns min, 2750ns max)
        Interrupt: pin A routed to IRQ 21
        Region 0: I/O ports at 2000 [size=256]
        Region 1: Memory at d4004000 (32-bit, non-prefetchable) [size=4K]
        [virtual] Expansion ROM at 60000000 [disabled] [size=128K]
        Capabilities: <access denied>

00:07.0 Network controller: Intersil Corporation Prism 2.5 Wavelan chipset (rev 
01)
        Subsystem: AMBIT Microsystem Corp. LAN-Express IEEE 802.11b Wireless LAN
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 32, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 17
        Region 0: Memory at d4006000 (32-bit, prefetchable) [size=4K]
        Capabilities: <access denied>

00:0a.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev aa)
        Subsystem: Sony Corporation Unknown device 814e
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 168
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at 60020000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
        Memory window 0: 50000000-53fff000 (prefetchable)
        Memory window 1: 54000000-57fff000
        I/O window 0: 00002400-000024ff
        I/O window 1: 00002800-000028ff
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
        16-bit legacy interface ports at 0001

00:0a.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev aa)
        Subsystem: Sony Corporation Unknown device 814e
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 168
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at 60021000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
        Memory window 0: 58000000-5bfff000 (prefetchable)
        Memory window 1: 5c000000-5ffff000
        I/O window 0: 00002c00-00002cff
        I/O window 1: 00003000-000030ff
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
        16-bit legacy interface ports at 0001

00:0a.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 02) 
(prog-if 10 [OHCI])
        Subsystem: Sony Corporation Unknown device 814e
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (500ns min, 1000ns max)
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at d4005000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: <access denied>

01:00.0 VGA compatible controller: nVidia Corporation NV31M [GeForce FX Go5600] 
(rev a1) (prog-if 00 [VGA])
        Subsystem: Sony Corporation Unknown device 814f
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 40 (1250ns min, 250ns max)
        Interrupt: pin A routed to IRQ 10
        Region 0: Memory at d5000000 (32-bit, non-prefetchable) [size=16M]
        Region 1: Memory at e0000000 (32-bit, prefetchable) [size=256M]
        Capabilities: <access denied>


00:00.0 0600: 1039:0648 (rev 03)
        Subsystem: 104d:814e
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ >SERR- <PERR-
        Latency: 32
        Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=64M]
        Capabilities: <access denied>

00:01.0 0604: 1039:0002 (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 99
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=86
        Memory behind bridge: d5000000-d5ffffff
        Prefetchable memory behind bridge: e0000000-efffffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-

00:02.0 0601: 1039:0963 (rev 14)
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0

00:02.1 0c05: 1039:0016
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin B routed to IRQ 0
        Region 4: I/O ports at 8100 [size=32]

00:02.5 0101: 1039:5513 (prog-if 80 [Master])
        Subsystem: 104d:814e
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 128
        Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) 
[disabled] [size=8]
        Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) 
[disabled] [size=1]
        Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) 
[disabled] [size=8]
        Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) 
[disabled] [size=1]
        Region 4: I/O ports at 1000 [size=16]

00:02.6 0703: 1039:7013 (rev a0) (prog-if 00 [Generic])
        Subsystem: 104d:814e
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin C routed to IRQ 17
        Region 0: I/O ports at 1800 [size=256]
        Region 1: I/O ports at 1400 [size=128]
        Capabilities: <access denied>

00:02.7 0401: 1039:7012 (rev a0)
        Subsystem: 104d:814e
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 173 (13000ns min, 2750ns max)
        Interrupt: pin C routed to IRQ 17
        Region 0: I/O ports at 1c00 [size=256]
        Region 1: I/O ports at 1480 [size=128]
        Capabilities: <access denied>

00:03.0 0c03: 1039:7001 (rev 0f) (prog-if 10 [OHCI])
        Subsystem: 104d:814e
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (20000ns max)
        Interrupt: pin A routed to IRQ 18
        Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=4K]

00:03.1 0c03: 1039:7001 (rev 0f) (prog-if 10 [OHCI])
        Subsystem: 104d:814e
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (20000ns max)
        Interrupt: pin B routed to IRQ 19
        Region 0: Memory at d4001000 (32-bit, non-prefetchable) [size=4K]

00:03.2 0c03: 1039:7001 (rev 0f) (prog-if 10 [OHCI])
        Subsystem: 104d:814e
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (20000ns max)
        Interrupt: pin C routed to IRQ 20
        Region 0: Memory at d4002000 (32-bit, non-prefetchable) [size=4K]

00:03.3 0c03: 1039:7002 (prog-if 20 [EHCI])
        Subsystem: 104d:814e
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (20000ns max)
        Interrupt: pin D routed to IRQ 22
        Region 0: Memory at d4003000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>

00:04.0 0200: 1039:0900 (rev 90)
        Subsystem: 104d:814e
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 173 (13000ns min, 2750ns max)
        Interrupt: pin A routed to IRQ 21
        Region 0: I/O ports at 2000 [size=256]
        Region 1: Memory at d4004000 (32-bit, non-prefetchable) [size=4K]
        [virtual] Expansion ROM at 60000000 [disabled] [size=128K]
        Capabilities: <access denied>

00:07.0 0280: 1260:3872 (rev 01)
        Subsystem: 1468:0202
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 32, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 17
        Region 0: Memory at d4006000 (32-bit, prefetchable) [size=4K]
        Capabilities: <access denied>

00:0a.0 0607: 1180:0476 (rev aa)
        Subsystem: 104d:814e
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 168
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at 60020000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
        Memory window 0: 50000000-53fff000 (prefetchable)
        Memory window 1: 54000000-57fff000
        I/O window 0: 00002400-000024ff
        I/O window 1: 00002800-000028ff
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
        16-bit legacy interface ports at 0001

00:0a.1 0607: 1180:0476 (rev aa)
        Subsystem: 104d:814e
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 168
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at 60021000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
        Memory window 0: 58000000-5bfff000 (prefetchable)
        Memory window 1: 5c000000-5ffff000
        I/O window 0: 00002c00-00002cff
        I/O window 1: 00003000-000030ff
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
        16-bit legacy interface ports at 0001

00:0a.2 0c00: 1180:0552 (rev 02) (prog-if 10 [OHCI])
        Subsystem: 104d:814e
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (500ns min, 1000ns max)
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at d4005000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: <access denied>

01:00.0 0300: 10de:031a (rev a1) (prog-if 00 [VGA])
        Subsystem: 104d:814f
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 40 (1250ns min, 250ns max)
        Interrupt: pin A routed to IRQ 10
        Region 0: Memory at d5000000 (32-bit, non-prefetchable) [size=16M]
        Region 1: Memory at e0000000 (32-bit, prefetchable) [size=256M]
        Capabilities: <access denied>


Linux version 2.6.20-16-generic ([EMAIL PROTECTED]) (gcc version 4.1.2 (Ubuntu 
4.1.2-0ubuntu4)) #2 SMP Thu Jun 7 20:19:32 UTC 2007

Ubuntu 2.6.20-16.29-generic

Linux bjorn-laptop 2.6.20-16-generic #2 SMP Thu Jun 7 20:19:32 UTC 2007
i686 GNU/Linux

-- 
Wi-fi missing
https://bugs.launchpad.net/bugs/121409
You received this bug notification because you are a member of Ubuntu
Desktop Bugs, which is a bug contact for gnome-nettool in ubuntu.

-- 
desktop-bugs mailing list
desktop-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/desktop-bugs

Reply via email to