some progress here? it would be nice to have it in 2008.11 (at least) if i can help (test etc.) let me know
On Mon, Aug 18, 2008 at 10:06 AM, Henry Zhang <Hua.Zhang at sun.com> wrote: > OK, I will take a look at the bug, I think it's make sense to remove the > check codes in netlist.c. > > Thanks, > Henry > > Andras Barna ??: >> >> well, i found the cause see: >> http://bugzilla.gnome.org/show_bug.cgi?id=548095 >> >> On Sun, Aug 17, 2008 at 1:00 AM, Andras Barna <andras.barna at gmail.com> >> wrote: >>> >>> just to clarify, i'm talking about the "official" livecd (b86) >>> >>> On Sun, Aug 17, 2008 at 12:56 AM, Andras Barna <andras.barna at gmail.com> >>> wrote: >>>> >>>> Henry, >>>> i compiled here SUNWlibgtop on opensolaris (b95). >>>> added to ./configure: --with-libgtop-examples >>>> and run ./netload: >>>> $ ./netload rtls1 >>>> Method = 1 >>>> Command = '/usr/bin/libgtop_server2' >>>> Host = '' - 0 >>>> >>>> Network Load (0x000000000000000d): >>>> >>>> Interface Flags: 0x0000000000010046 >>>> Address: 0x0201a8c0 - 192.168.1.2 >>>> Subnet: 0x00ffffff - 255.255.255.0 >>>> >>>> MTU: 0 >>>> Collisions: 0 >>>> >>>> Packets In: 0 >>>> Packets Out: 0 >>>> Packets Total: 0 >>>> >>>> Bytes In: 0 >>>> Bytes Out: 0 >>>> Bytes Total: 0 >>>> >>>> Errors In: 0 >>>> Errors Out: 0 >>>> Errors Total: 0 >>>> >>>> Address6: :: >>>> Prefix6: :: >>>> Scope6: 000 >>>> >>>> Harware Address: 00:00:00:00:00:00:00:00 >>>> >>>> $ >>>> --- >>>> the same binary on the livecd: >>>> $ ./netload rtls0 >>>> Method = 1 >>>> Command = '/usr/bin/libgtop_server2' >>>> Host = '' - 0 >>>> >>>> Network Load (0x0000000000002ffd): >>>> >>>> Interface Flags: 0x0000000000010046 >>>> Address: 0x0201a8c0 - 192.168.1.2 >>>> Subnet: 0x000000ff - 255.0.0.0 >>>> >>>> MTU: 0 >>>> Collisions: 0 >>>> >>>> Packets In: 114 >>>> Packets Out: 179 >>>> Packets Total: 293 >>>> >>>> Bytes In: 19310 >>>> Bytes Out: 19427 >>>> Bytes Total: 38737 >>>> >>>> Errors In: 0 >>>> Errors Out: 0 >>>> Errors Total: 0 >>>> >>>> Address6: :: >>>> Prefix6: :: >>>> Scope6: 000 >>>> >>>> Harware Address: 00:00:00:00:00:00:00:00 >>>> >>>> $ >>>> >>>> can you check this please? >>>> thanks >>>> >>>> >>>> -- >>>> Andy >>>> http://blog.sartek.net >>>> >>> >>> >>> -- >>> Andy >>> http://blog.sartek.net >>> >> >> >> > -- Andy http://blog.sartek.net
