*** This bug is a duplicate of bug 548992 *** https://bugs.launchpad.net/bugs/548992
Same here on a Dell Vostro 1015 with an AR9285 Atheros card. Thomas' power off/power on line only makes things worse (reconnect happens immediately). On this machine there is practically no connection at all between the reconnects. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/953631 Title: NM disconnects frequently on "wlan0: deauthenticating ... by local choice (reason=3)" Status in “network-manager” package in Ubuntu: Incomplete Bug description: Hello! In 11.10 (fresh installation) my wireless connection regularly drops for no apparent reason. The deauthentication message printed in the Summary field is all I could locate in dmesg, but I'm honestly unequipped to diagnose this sort of thing. I've seen this reported in various ways all over, but only half-baked solutions out there to fix it. The drop/reconnect loop is not severe enough to interfere with system updates (slows down to nothing on drop but quickly picks speed back up and resumes d/l), but it makes even trivial uses of the internet very, very difficult. If no serious solution is coming I would appreciate recommendations for how to duct-tape a fix together. Here are dmesg outputs gathered from the last two times this happened. [ 78.224284] wlan0: associated [ 158.126336] wlan0: deauthenticating from c0:c1:c0:1c:4d:ec by local choice (reason=3) [ 158.309844] cfg80211: All devices are disconnected, going to restore regulatory settings [ 158.309850] cfg80211: Restoring regulatory settings [ 158.309854] cfg80211: Calling CRDA to update world regulatory domain [ 158.313270] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 158.313275] cfg80211: World regulatory domain updated: [ 158.313277] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 158.313281] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 158.313284] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 158.313286] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 158.313289] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 158.313292] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 161.114339] rtl8192c: Loading firmware file rtlwifi/rtl8192cfw.bin [ 162.310065] wlan0: authenticate with c0:c1:c0:1c:4d:ec (try 1) [ 162.311754] wlan0: authenticated [ 162.312091] wlan0: associate with c0:c1:c0:1c:4d:ec (try 1) [ 162.315822] wlan0: RX ReassocResp from c0:c1:c0:1c:4d:ec (capab=0x411 status=0 aid=3) [ 162.315824] wlan0: associated [ 398.192739] wlan0: deauthenticating from c0:c1:c0:1c:4d:ec by local choice (reason=3) [ 398.331622] cfg80211: All devices are disconnected, going to restore regulatory settings [ 398.331627] cfg80211: Restoring regulatory settings [ 398.331632] cfg80211: Calling CRDA to update world regulatory domain [ 398.335344] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 398.335349] cfg80211: World regulatory domain updated: [ 398.335351] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 398.335355] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 398.335358] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 398.335361] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 398.335364] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 398.335367] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 400.990166] rtl8192c: Loading firmware file rtlwifi/rtl8192cfw.bin [ 402.188045] wlan0: authenticate with c0:c1:c0:1c:4d:ec (try 1) [ 402.192442] wlan0: authenticated [ 402.192573] wlan0: associate with c0:c1:c0:1c:4d:ec (try 1) [ 402.196320] wlan0: RX ReassocResp from c0:c1:c0:1c:4d:ec (capab=0x411 status=0 aid=3) [ 402.196325] wlan0: associated [ 485.295649] wlan0: deauthenticating from c0:c1:c0:1c:4d:ec by local choice (reason=3) [ 485.459013] cfg80211: All devices are disconnected, going to restore regulatory settings [ 485.459018] cfg80211: Restoring regulatory settings [ 485.459031] cfg80211: Calling CRDA to update world regulatory domain [ 485.462615] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 485.462620] cfg80211: World regulatory domain updated: [ 485.462622] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 485.462626] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 485.462629] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 485.462632] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 485.462635] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 485.462637] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 487.958668] rtl8192c: Loading firmware file rtlwifi/rtl8192cfw.bin [ 489.156479] wlan0: authenticate with c0:c1:c0:1c:4d:ec (try 1) [ 489.158079] wlan0: authenticated [ 489.158281] wlan0: associate with c0:c1:c0:1c:4d:ec (try 1) [ 489.164696] wlan0: RX ReassocResp from c0:c1:c0:1c:4d:ec (capab=0x411 status=0 aid=3) [ 489.164701] wlan0: associated [ 836.564621] wlan0: deauthenticating from c0:c1:c0:1c:4d:ec by local choice (reason=3) [ 836.707940] cfg80211: All devices are disconnected, going to restore regulatory settings [ 836.707946] cfg80211: Restoring regulatory settings [ 836.707954] cfg80211: Calling CRDA to update world regulatory domain [ 836.711369] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 836.711374] cfg80211: World regulatory domain updated: [ 836.711376] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 836.711379] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 836.711382] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 836.711385] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 836.711388] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 836.711391] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 839.953599] rtl8192c: Loading firmware file rtlwifi/rtl8192cfw.bin [ 841.154099] wlan0: authenticate with c0:c1:c0:1c:4d:ec (try 1) [ 841.156813] wlan0: authenticated [ 841.156942] wlan0: associate with c0:c1:c0:1c:4d:ec (try 1) [ 841.160644] wlan0: RX ReassocResp from c0:c1:c0:1c:4d:ec (capab=0x411 status=0 aid=3) [ 841.160647] wlan0: associated [ 25.913961] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 27.790438] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 60.782902] show_signal_msg: 39 callbacks suppressed [ 60.782908] colord[1430]: segfault at 7f92215b8560 ip 00007f91cea968a5 sp 00007fff94489f70 error 4 in libdbus-1.so.3.5.7[7f91cea6f000+42000] [ 73.179327] wlan0: deauthenticating from c0:c1:c0:1c:4d:ec by local choice (reason=3) [ 73.266515] cfg80211: All devices are disconnected, going to restore regulatory settings [ 73.266521] cfg80211: Restoring regulatory settings [ 73.266543] cfg80211: Calling CRDA to update world regulatory domain [ 73.268430] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 73.268432] cfg80211: World regulatory domain updated: [ 73.268434] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 73.268435] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 73.268437] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 73.268438] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 73.268439] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 73.268441] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 76.137888] rtl8192c: Loading firmware file rtlwifi/rtl8192cfw.bin [ 78.218227] wlan0: authenticate with c0:c1:c0:1c:4d:ec (try 1) [ 78.220423] wlan0: authenticated [ 78.220528] wlan0: associate with c0:c1:c0:1c:4d:ec (try 1) [ 78.224281] wlan0: RX ReassocResp from c0:c1:c0:1c:4d:ec (capab=0x411 status=0 aid=3) [ 78.224284] wlan0: associated [ 158.126336] wlan0: deauthenticating from c0:c1:c0:1c:4d:ec by local choice (reason=3) [ 158.309844] cfg80211: All devices are disconnected, going to restore regulatory settings [ 158.309850] cfg80211: Restoring regulatory settings [ 158.309854] cfg80211: Calling CRDA to update world regulatory domain [ 158.313270] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 158.313275] cfg80211: World regulatory domain updated: [ 158.313277] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 158.313281] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 158.313284] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 158.313286] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 158.313289] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 158.313292] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 161.114339] rtl8192c: Loading firmware file rtlwifi/rtl8192cfw.bin [ 162.310065] wlan0: authenticate with c0:c1:c0:1c:4d:ec (try 1) [ 162.311754] wlan0: authenticated [ 162.312091] wlan0: associate with c0:c1:c0:1c:4d:ec (try 1) [ 162.315822] wlan0: RX ReassocResp from c0:c1:c0:1c:4d:ec (capab=0x411 status=0 aid=3) [ 162.315824] wlan0: associated [ 398.192739] wlan0: deauthenticating from c0:c1:c0:1c:4d:ec by local choice (reason=3) [ 398.331622] cfg80211: All devices are disconnected, going to restore regulatory settings [ 398.331627] cfg80211: Restoring regulatory settings [ 398.331632] cfg80211: Calling CRDA to update world regulatory domain [ 398.335344] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 398.335349] cfg80211: World regulatory domain updated: [ 398.335351] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 398.335355] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 398.335358] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 398.335361] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 398.335364] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 398.335367] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 400.990166] rtl8192c: Loading firmware file rtlwifi/rtl8192cfw.bin [ 402.188045] wlan0: authenticate with c0:c1:c0:1c:4d:ec (try 1) [ 402.192442] wlan0: authenticated [ 402.192573] wlan0: associate with c0:c1:c0:1c:4d:ec (try 1) [ 402.196320] wlan0: RX ReassocResp from c0:c1:c0:1c:4d:ec (capab=0x411 status=0 aid=3) [ 402.196325] wlan0: associated [ 485.295649] wlan0: deauthenticating from c0:c1:c0:1c:4d:ec by local choice (reason=3) [ 485.459013] cfg80211: All devices are disconnected, going to restore regulatory settings [ 485.459018] cfg80211: Restoring regulatory settings [ 485.459031] cfg80211: Calling CRDA to update world regulatory domain [ 485.462615] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 485.462620] cfg80211: World regulatory domain updated: [ 485.462622] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 485.462626] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 485.462629] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 485.462632] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 485.462635] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 485.462637] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 487.958668] rtl8192c: Loading firmware file rtlwifi/rtl8192cfw.bin [ 489.156479] wlan0: authenticate with c0:c1:c0:1c:4d:ec (try 1) [ 489.158079] wlan0: authenticated [ 489.158281] wlan0: associate with c0:c1:c0:1c:4d:ec (try 1) [ 489.164696] wlan0: RX ReassocResp from c0:c1:c0:1c:4d:ec (capab=0x411 status=0 aid=3) [ 489.164701] wlan0: associated [ 836.564621] wlan0: deauthenticating from c0:c1:c0:1c:4d:ec by local choice (reason=3) [ 836.707940] cfg80211: All devices are disconnected, going to restore regulatory settings [ 836.707946] cfg80211: Restoring regulatory settings [ 836.707954] cfg80211: Calling CRDA to update world regulatory domain [ 836.711369] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 836.711374] cfg80211: World regulatory domain updated: [ 836.711376] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 836.711379] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 836.711382] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 836.711385] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 836.711388] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 836.711391] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 839.953599] rtl8192c: Loading firmware file rtlwifi/rtl8192cfw.bin [ 841.154099] wlan0: authenticate with c0:c1:c0:1c:4d:ec (try 1) [ 841.156813] wlan0: authenticated [ 841.156942] wlan0: associate with c0:c1:c0:1c:4d:ec (try 1) [ 841.160644] wlan0: RX ReassocResp from c0:c1:c0:1c:4d:ec (capab=0x411 status=0 aid=3) [ 841.160647] wlan0: associated [ 973.654032] wlan0: deauthenticating from c0:c1:c0:1c:4d:ec by local choice (reason=3) [ 973.844870] cfg80211: All devices are disconnected, going to restore regulatory settings [ 973.844876] cfg80211: Restoring regulatory settings [ 973.844883] cfg80211: Calling CRDA to update world regulatory domain [ 973.846989] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 973.846991] cfg80211: World regulatory domain updated: [ 973.846992] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 973.846994] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 973.846995] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 973.846996] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 973.846998] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 973.846999] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 976.955374] rtl8192c: Loading firmware file rtlwifi/rtl8192cfw.bin [ 978.147018] wlan0: authenticate with c0:c1:c0:1c:4d:ec (try 1) [ 978.148620] wlan0: authenticated [ 978.149010] wlan0: associate with c0:c1:c0:1c:4d:ec (try 1) [ 978.153980] wlan0: RX ReassocResp from c0:c1:c0:1c:4d:ec (capab=0x411 status=0 aid=3) [ 978.153983] wlan0: associated [ 1041.486115] wlan0: deauthenticating from c0:c1:c0:1c:4d:ec by local choice (reason=3) [ 1041.649523] cfg80211: All devices are disconnected, going to restore regulatory settings [ 1041.649526] cfg80211: Restoring regulatory settings [ 1041.649547] cfg80211: Calling CRDA to update world regulatory domain [ 1041.651395] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 1041.651397] cfg80211: World regulatory domain updated: [ 1041.651398] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1041.651400] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1041.651402] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1041.651403] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1041.651404] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1041.651406] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1044.950570] rtl8192c: Loading firmware file rtlwifi/rtl8192cfw.bin [ 1046.144414] wlan0: authenticate with c0:c1:c0:1c:4d:ec (try 1) [ 1046.146039] wlan0: authenticated [ 1046.146216] wlan0: associate with c0:c1:c0:1c:4d:ec (try 1) [ 1046.152000] wlan0: RX ReassocResp from c0:c1:c0:1c:4d:ec (capab=0x411 status=0 aid=3) [ 1046.152002] wlan0: associated [ 1086.961179] wlan0: deauthenticating from c0:c1:c0:1c:4d:ec by local choice (reason=3) [ 1087.108559] cfg80211: All devices are disconnected, going to restore regulatory settings [ 1087.108562] cfg80211: Restoring regulatory settings [ 1087.108564] cfg80211: Calling CRDA to update world regulatory domain [ 1087.110591] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 1087.110594] cfg80211: World regulatory domain updated: [ 1087.110595] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1087.110597] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1087.110598] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1087.110600] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1087.110601] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1087.110602] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1089.953605] rtl8192c: Loading firmware file rtlwifi/rtl8192cfw.bin [ 1091.150370] wlan0: authenticate with c0:c1:c0:1c:4d:ec (try 1) [ 1091.152669] wlan0: authenticated [ 1091.152816] wlan0: associate with c0:c1:c0:1c:4d:ec (try 1) [ 1091.158348] wlan0: RX ReassocResp from c0:c1:c0:1c:4d:ec (capab=0x411 status=0 aid=3) [ 1091.158353] wlan0: associated [ 1168.977126] wlan0: deauthenticating from c0:c1:c0:1c:4d:ec by local choice (reason=3) [ 1169.123921] cfg80211: All devices are disconnected, going to restore regulatory settings [ 1169.123927] cfg80211: Restoring regulatory settings [ 1169.123936] cfg80211: Calling CRDA to update world regulatory domain [ 1169.126328] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 1169.126330] cfg80211: World regulatory domain updated: [ 1169.126331] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1169.126333] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1169.126334] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1169.126336] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1169.126337] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1169.126338] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1171.951368] rtl8192c: Loading firmware file rtlwifi/rtl8192cfw.bin [ 1173.145938] wlan0: authenticate with c0:c1:c0:1c:4d:ec (try 1) [ 1173.147539] wlan0: authenticated [ 1173.147594] wlan0: associate with c0:c1:c0:1c:4d:ec (try 1) [ 1173.151404] wlan0: RX ReassocResp from c0:c1:c0:1c:4d:ec (capab=0x411 status=0 aid=3) [ 1173.151409] wlan0: associated [ 1236.074400] wlan0: deauthenticating from c0:c1:c0:1c:4d:ec by local choice (reason=3) [ 1236.191757] cfg80211: All devices are disconnected, going to restore regulatory settings [ 1236.191814] cfg80211: Restoring regulatory settings [ 1236.191818] cfg80211: Calling CRDA to update world regulatory domain [ 1236.194310] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 1236.194313] cfg80211: World regulatory domain updated: [ 1236.194314] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1236.194315] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1236.194317] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1236.194318] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1236.194320] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1236.194321] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1238.945214] rtl8192c: Loading firmware file rtlwifi/rtl8192cfw.bin [ 1240.147877] wlan0: authenticate with c0:c1:c0:1c:4d:ec (try 1) [ 1240.149792] wlan0: authenticated [ 1240.149875] wlan0: associate with c0:c1:c0:1c:4d:ec (try 1) [ 1240.157117] wlan0: RX ReassocResp from c0:c1:c0:1c:4d:ec (capab=0x411 status=0 aid=3) [ 1240.157120] wlan0: associated [ 1280.336546] wlan0: deauthenticating from c0:c1:c0:1c:4d:ec by local choice (reason=3) [ 1280.523418] cfg80211: All devices are disconnected, going to restore regulatory settings [ 1280.523423] cfg80211: Restoring regulatory settings [ 1280.523428] cfg80211: Calling CRDA to update world regulatory domain [ 1280.526768] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 1280.526772] cfg80211: World regulatory domain updated: [ 1280.526775] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1280.526778] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1280.526781] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1280.526784] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1280.526787] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1280.526790] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1282.949631] rtl8192c: Loading firmware file rtlwifi/rtl8192cfw.bin [ 1284.149649] wlan0: authenticate with c0:c1:c0:1c:4d:ec (try 1) [ 1284.152012] wlan0: authenticated [ 1284.152174] wlan0: associate with c0:c1:c0:1c:4d:ec (try 1) [ 1284.157223] wlan0: RX ReassocResp from c0:c1:c0:1c:4d:ec (capab=0x411 status=0 aid=3) [ 1284.157227] wlan0: associated [ 1331.628775] wlan0: deauthenticating from c0:c1:c0:1c:4d:ec by local choice (reason=3) [ 1331.740288] cfg80211: All devices are disconnected, going to restore regulatory settings [ 1331.740291] cfg80211: Restoring regulatory settings [ 1331.740294] cfg80211: Calling CRDA to update world regulatory domain [ 1331.743424] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 1331.743429] cfg80211: World regulatory domain updated: [ 1331.743431] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1331.743435] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1331.743438] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1331.743441] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1331.743444] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1331.743446] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1334.948825] rtl8192c: Loading firmware file rtlwifi/rtl8192cfw.bin [ 1336.146785] wlan0: authenticate with c0:c1:c0:1c:4d:ec (try 1) [ 1336.149141] wlan0: authenticated [ 1336.149318] wlan0: associate with c0:c1:c0:1c:4d:ec (try 1) [ 1336.153687] wlan0: RX ReassocResp from c0:c1:c0:1c:4d:ec (capab=0x411 status=0 aid=3) [ 1336.153689] wlan0: associated [ 1539.303384] wlan0: deauthenticating from c0:c1:c0:1c:4d:ec by local choice (reason=3) [ 1539.393097] cfg80211: All devices are disconnected, going to restore regulatory settings [ 1539.393111] cfg80211: Restoring regulatory settings [ 1539.393113] cfg80211: Calling CRDA to update world regulatory domain [ 1539.395466] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 1539.395469] cfg80211: World regulatory domain updated: [ 1539.395470] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1539.395471] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1539.395473] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1539.395474] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1539.395475] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1539.395477] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1541.945719] rtl8192c: Loading firmware file rtlwifi/rtl8192cfw.bin [ 1543.140184] wlan0: authenticate with c0:c1:c0:1c:4d:ec (try 1) [ 1543.146622] wlan0: authenticated [ 1543.146778] wlan0: associate with c0:c1:c0:1c:4d:ec (try 1) [ 1543.150497] wlan0: RX ReassocResp from c0:c1:c0:1c:4d:ec (capab=0x411 status=0 aid=3) [ 1543.150499] wlan0: associated [ 1606.986073] wlan0: deauthenticating from c0:c1:c0:1c:4d:ec by local choice (reason=3) [ 1607.117147] cfg80211: All devices are disconnected, going to restore regulatory settings [ 1607.117151] cfg80211: Restoring regulatory settings [ 1607.117153] cfg80211: Calling CRDA to update world regulatory domain [ 1607.121205] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 1607.121210] cfg80211: World regulatory domain updated: [ 1607.121213] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1607.121216] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1607.121220] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1607.121222] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1607.121225] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1607.121228] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1609.942377] rtl8192c: Loading firmware file rtlwifi/rtl8192cfw.bin [ 1611.140449] wlan0: authenticate with c0:c1:c0:1c:4d:ec (try 1) [ 1611.142227] wlan0: authenticated [ 1611.142359] wlan0: associate with c0:c1:c0:1c:4d:ec (try 1) [ 1611.147365] wlan0: RX ReassocResp from c0:c1:c0:1c:4d:ec (capab=0x411 status=0 aid=3) [ 1611.147370] wlan0: associated [ 1856.695017] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. [ 2175.252412] wlan0: deauthenticating from c0:c1:c0:1c:4d:ec by local choice (reason=3) [ 2175.388027] cfg80211: All devices are disconnected, going to restore regulatory settings [ 2175.388031] cfg80211: Restoring regulatory settings [ 2175.388036] cfg80211: Calling CRDA to update world regulatory domain [ 2175.389948] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 2175.389950] cfg80211: World regulatory domain updated: [ 2175.389951] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 2175.389953] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2175.389954] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 2175.389956] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 2175.389957] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2175.389958] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2177.921550] rtl8192c: Loading firmware file rtlwifi/rtl8192cfw.bin [ 2179.118132] wlan0: authenticate with c0:c1:c0:1c:4d:ec (try 1) [ 2179.120959] wlan0: authenticated [ 2179.121121] wlan0: associate with c0:c1:c0:1c:4d:ec (try 1) [ 2179.126087] wlan0: RX ReassocResp from c0:c1:c0:1c:4d:ec (capab=0x411 status=0 aid=3) [ 2179.126089] wlan0: associated [ 2390.364979] wlan0: deauthenticating from c0:c1:c0:1c:4d:ec by local choice (reason=3) [ 2390.460718] cfg80211: All devices are disconnected, going to restore regulatory settings [ 2390.460731] cfg80211: Restoring regulatory settings [ 2390.460736] cfg80211: Calling CRDA to update world regulatory domain [ 2390.462628] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 2390.462630] cfg80211: World regulatory domain updated: [ 2390.462631] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 2390.462633] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2390.462634] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 2390.462635] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 2390.462637] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2390.462638] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2392.927175] rtl8192c: Loading firmware file rtlwifi/rtl8192cfw.bin [ 2394.130338] wlan0: authenticate with c0:c1:c0:1c:4d:ec (try 1) [ 2394.133835] wlan0: authenticated [ 2394.134048] wlan0: associate with c0:c1:c0:1c:4d:ec (try 1) [ 2394.137768] wlan0: RX ReassocResp from c0:c1:c0:1c:4d:ec (capab=0x411 status=0 aid=3) [ 2394.137770] wlan0: associated [ 2502.680164] wlan0: deauthenticating from c0:c1:c0:1c:4d:ec by local choice (reason=3) [ 2502.840040] cfg80211: All devices are disconnected, going to restore regulatory settings [ 2502.840053] cfg80211: Restoring regulatory settings [ 2502.840057] cfg80211: Calling CRDA to update world regulatory domain [ 2502.842111] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 2502.842114] cfg80211: World regulatory domain updated: [ 2502.842115] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 2502.842117] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2502.842118] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 2502.842119] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 2502.842121] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2502.842122] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 2505.925482] rtl8192c: Loading firmware file rtlwifi/rtl8192cfw.bin [ 2507.126440] wlan0: authenticate with c0:c1:c0:1c:4d:ec (try 1) [ 2507.129668] wlan0: authenticated [ 2507.129783] wlan0: associate with c0:c1:c0:1c:4d:ec (try 1) [ 2507.141490] wlan0: RX ReassocResp from c0:c1:c0:1c:4d:ec (capab=0x411 status=0 aid=3) [ 2507.141495] wlan0: associated [ 3446.526366] wlan0: deauthenticating from c0:c1:c0:1c:4d:ec by local choice (reason=3) [ 3446.705473] cfg80211: All devices are disconnected, going to restore regulatory settings [ 3446.705479] cfg80211: Restoring regulatory settings [ 3446.705487] cfg80211: Calling CRDA to update world regulatory domain [ 3446.709087] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 3446.709091] cfg80211: World regulatory domain updated: [ 3446.709093] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 3446.709097] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3446.709100] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 3446.709103] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 3446.709106] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3446.709109] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3449.908796] rtl8192c: Loading firmware file rtlwifi/rtl8192cfw.bin [ 3451.106870] wlan0: authenticate with c0:c1:c0:1c:4d:ec (try 1) [ 3451.108565] wlan0: authenticated [ 3451.108697] wlan0: associate with c0:c1:c0:1c:4d:ec (try 1) [ 3451.112454] wlan0: RX ReassocResp from c0:c1:c0:1c:4d:ec (capab=0x411 status=0 aid=3) [ 3451.112457] wlan0: associated Please let me know if I can provide any additional information. Just tell me what to run, copy, and post. ProblemType: Bug DistroRelease: Ubuntu 11.10 Package: linux-image-3.0.0-12-generic 3.0.0-12.20 ProcVersionSignature: Ubuntu 3.0.0-12.20-generic 3.0.4 Uname: Linux 3.0.0-12-generic x86_64 NonfreeKernelModules: fglrx AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 1.23-0ubuntu4 Architecture: amd64 ArecordDevices: **** List of CAPTURE Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: ALC892 Analog [ALC892 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USER PID ACCESS COMMAND /dev/snd/controlC1: francis 1606 F.... pulseaudio /dev/snd/controlC0: francis 1606 F.... pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xfe700000 irq 48' Mixer name : 'Realtek ALC892' Components : 'HDA:10ec0892,18498892,00100302' Controls : 33 Simple ctrls : 19 Card1.Amixer.info: Card hw:1 'Generic'/'HD-Audio Generic at 0xfe640000 irq 49' Mixer name : 'ATI R6xx HDMI' Components : 'HDA:1002aa01,00aa0100,00100200' Controls : 4 Simple ctrls : 1 Card1.Amixer.values: Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [on] Date: Mon Mar 12 21:33:04 2012 HibernationDevice: RESUME=UUID=7c8d01d6-9e4e-4a0f-aaa5-1a704cbb47e9 InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Release amd64 (20111012) MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M. ProcEnviron: PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.0.0-12-generic root=UUID=500f2652-78a6-4782-b936-99fa670ee62a ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.0.0-12-generic N/A linux-backports-modules-3.0.0-12-generic N/A linux-firmware 1.60 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux StagingDrivers: mei UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 09/09/2011 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P1.10 dmi.board.name: Z68 Pro3 Gen3 dmi.board.vendor: ASRock dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP1.10:bd09/09/2011:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnZ68Pro3Gen3:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.name: To Be Filled By O.E.M. dmi.product.version: To Be Filled By O.E.M. dmi.sys.vendor: To Be Filled By O.E.M. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/953631/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp