Comment #2. yes it is. Bug #1017738. As I remember the syslog messages are a bit different between raring and quantal but the desktop results are the same. Precise runs like a champ. So does my Android tablet, WPA security the whole bit.
-- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1073907 Title: Raring disconnects wireless WPA on booting Status in “network-manager” package in Ubuntu: New Bug description: Raring Ringtail on booting says "Disconnect" when it should stay automatically connected. After boot, nm should connect to wireless WPA security. Instead, "Disconnect". To get wlan0 connected to enter this bug, I do sudo dhclient wlan0 wait 5 seconds Ctrl-c then wlan0 is connected. Attached is syslog showing Disconnect and tons of wlan0 messages. At 7:42:37 syslog shows it is "ready" so it then "disconnects"??? At 07:44:27 I issued dhclient, wait 5 seconds, Ctrl-c and it connects O.K. showing there wasn't any reason for the Disconnect. Network controller: Intel Corporation Centrino Wireless-N 1000 Any way to try network manager from Precise? Precise nm connects no problem. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: network-manager 0.9.6.0-0ubuntu7 ProcVersionSignature: Ubuntu 3.5.0-17.28-generic 3.5.5 Uname: Linux 3.5.0-17-generic i686 ApportVersion: 2.6.1-0ubuntu6 Architecture: i386 Date: Thu Nov 1 07:49:35 2012 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2012-10-22 (9 days ago) InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release i386 (20121017.2) IpRoute: default via 192.168.0.1 dev wlan0 proto static 169.254.0.0/16 dev wlan0 scope link metric 1000 192.168.0.0/24 dev wlan0 proto kernel scope link src 192.168.0.7 metric 9 MarkForUpload: True NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR=<set> LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: network-manager UpgradeStatus: No upgrade log present (probably fresh install) WifiSyslog: Nov 1 07:48:30 Aspire1 wpa_supplicant[1039]: wlan0: WPA: Group rekeying completed with 00:0f:b3:b0:d6:3c [GTK=TKIP] Nov 1 07:49:30 Aspire1 wpa_supplicant[1039]: wlan0: WPA: Group rekeying completed with 00:0f:b3:b0:d6:3c [GTK=TKIP] Nov 1 07:50:30 Aspire1 wpa_supplicant[1039]: wlan0: WPA: Group rekeying completed with 00:0f:b3:b0:d6:3c [GTK=TKIP] mtime.conffile..etc.NetworkManager.NetworkManager.conf: 2012-10-31T17:54:58.469757 nmcli-dev: DEVICE TYPE STATE DBUS-PATH wlan0 802-11-wireless connected /org/freedesktop/NetworkManager/Devices/1 eth0 802-3-ethernet unavailable /org/freedesktop/NetworkManager/Devices/0 nmcli-nm: RUNNING VERSION STATE NET-ENABLED WIFI-HARDWARE WIFI WWAN-HARDWARE WWAN running 0.9.6.0 connected enabled enabled enabled enabled disabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1073907/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp