it is strange that your headphone is plugged in at 25.567 , unplugged at
25.781 and plugged again 25.855

seem related to [pulseaudio] module-device-restore.c: Restoring mute
state for sink alsa_output.pci-0000_00_14.2.analog-stereo.


(  25.567|  16.401) D: [pulseaudio] module-alsa-card.c: Jack 'Front Headphone 
Jack' is now plugged in
(  25.567|   0.000) D: [pulseaudio] device-port.c: Setting port 
analog-output-headphones to status yes
(  25.568|   0.000) D: [pulseaudio] module-switch-on-port-available.c: finding 
port analog-output-headphones
(  25.568|   0.000) D: [alsa-sink-ALC892 Analog] alsa-mixer.c: Activating path 
analog-output-headphones
(  25.568|   0.000) D: [alsa-sink-ALC892 Analog] alsa-mixer.c: Path 
analog-output-headphones (Headphones), direction=1, priority=90, probed=yes, 
supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, 
max_volume=64, min_dB=-179, max_dB=0
(  25.568|   0.000) D: [alsa-sink-ALC892 Analog] alsa-mixer.c: Element Master, 
direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, 
required_any=0, required_absent=0, mask=0x7ffffffffffff, n_channels=1, 
override_map=yes
(  25.568|   0.000) D: [alsa-sink-ALC892 Analog] alsa-mixer.c: Element 
Headphone, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, 
required=0, required_any=4, required_absent=0, mask=0x3600000000f66, 
n_channels=2, override_map=yes
(  25.568|   0.000) D: [alsa-sink-ALC892 Analog] alsa-mixer.c: Element Front, 
direction=1, switch=1, volume=3, volume_limit=-1, enumeration=0, required=0, 
required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
(  25.568|   0.000) D: [alsa-sink-ALC892 Analog] alsa-mixer.c: Element 
Surround, direction=1, switch=2, volume=2, volume_limit=-1, enumeration=0, 
required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, 
override_map=no
(  25.568|   0.000) D: [alsa-sink-ALC892 Analog] alsa-mixer.c: Element Side, 
direction=1, switch=2, volume=2, volume_limit=-1, enumeration=0, required=0, 
required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
(  25.568|   0.000) D: [alsa-sink-ALC892 Analog] alsa-mixer.c: Element Center, 
direction=1, switch=2, volume=2, volume_limit=-1, enumeration=0, required=0, 
required_any=0, required_absent=0, mask=0x7ffffffffffff, n_channels=1, 
override_map=no
(  25.568|   0.000) D: [alsa-sink-ALC892 Analog] alsa-mixer.c: Element LFE, 
direction=1, switch=2, volume=2, volume_limit=-1, enumeration=0, required=0, 
required_any=0, required_absent=0, mask=0x7ffffffffffff, n_channels=1, 
override_map=no
(  25.568|   0.000) D: [alsa-sink-ALC892 Analog] alsa-mixer.c: Element PCM, 
direction=1, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, 
required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, 
override_map=yes
(  25.568|   0.000) D: [alsa-sink-ALC892 Analog] alsa-mixer.c: Element IEC958, 
direction=1, switch=2, volume=0, volume_limit=-1, enumeration=0, required=0, 
required_any=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
(  25.568|   0.000) D: [alsa-sink-ALC892 Analog] alsa-mixer.c: Jack Front 
Headphone, alsa_name='Front Headphone Jack', detection possible
(  25.568|   0.000) D: [alsa-sink-ALC892 Analog] alsa-mixer.c: Jack Front 
Headphone Phantom, alsa_name='Front Headphone Phantom Jack', detection 
unavailable
(  25.568|   0.000) D: [alsa-sink-ALC892 Analog] alsa-mixer.c: Jack Headphone, 
alsa_name='Headphone Jack', detection unavailable
(  25.568|   0.000) D: [alsa-sink-ALC892 Analog] alsa-mixer.c: Jack Headphone 
Phantom, alsa_name='Headphone Phantom Jack', detection unavailable
(  25.568|   0.000) D: [alsa-sink-ALC892 Analog] alsa-mixer.c: Jack Headphone 
Mic, alsa_name='Headphone Mic Jack', detection unavailable
(  25.569|   0.000) I: [alsa-sink-ALC892 Analog] alsa-sink.c: Successfully 
enabled deferred volume.
(  25.569|   0.000) I: [alsa-sink-ALC892 Analog] alsa-sink.c: Hardware volume 
ranges from -179.00 dB to 0.00 dB.
(  25.569|   0.000) I: [alsa-sink-ALC892 Analog] alsa-sink.c: Fixing base 
volume to 0.00 dB
(  25.569|   0.000) I: [alsa-sink-ALC892 Analog] alsa-sink.c: Using hardware 
volume control. Hardware dB scale supported.
(  25.569|   0.000) I: [alsa-sink-ALC892 Analog] alsa-sink.c: Using hardware 
mute control.
(  25.569|   0.000) I: [pulseaudio] sink.c: Changed port of sink 0 
"alsa_output.pci-0000_00_14.2.analog-stereo" to analog-output-headphones
(  25.569|   0.000) I: [pulseaudio] module-device-restore.c: Restoring volume 
for sink alsa_output.pci-0000_00_14.2.analog-stereo.
(  25.569|   0.000) D: [pulseaudio] core-subscribe.c: Dropped redundant event 
due to change event.
(  25.569|   0.000) D: [alsa-sink-ALC892 Analog] alsa-sink.c: Requested volume: 
0:  20% 1:  20%
(  25.569|   0.000) D: [alsa-sink-ALC892 Analog] alsa-sink.c:            in dB: 
0: -41.80 dB 1: -41.80 dB
(  25.569|   0.000) D: [alsa-sink-ALC892 Analog] alsa-sink.c: Got hardware 
volume: 0:  20% 1:  20%
(  25.569|   0.000) D: [alsa-sink-ALC892 Analog] alsa-sink.c:               in 
dB: 0: -41.80 dB 1: -41.80 dB
(  25.569|   0.000) D: [alsa-sink-ALC892 Analog] alsa-sink.c: Calculated 
software volume: 0: 100% 1: 100% (accurate-enough=yes)
(  25.569|   0.000) D: [alsa-sink-ALC892 Analog] alsa-sink.c:                   
   in dB: 0: 0.00 dB 1: 0.00 dB
(  25.569|   0.000) D: [alsa-sink-ALC892 Analog] sink.c: Volume going down to 
13177 at 400878170
(  25.569|   0.000) D: [alsa-sink-ALC892 Analog] sink.c: Volume change to 13177 
at 400878170 was written 34 usec late
(  25.569|   0.000) I: [pulseaudio] module-device-restore.c: Restored volume: 
0:  20% 1:  20%
(  25.570|   0.000) I: [pulseaudio] module-device-restore.c: Restoring mute 
state for sink alsa_output.pci-0000_00_14.2.analog-stereo.
(  25.570|   0.000) D: [pulseaudio] core-subscribe.c: Dropped redundant event 
due to change event.
(  25.781|   0.210) D: [pulseaudio] module-alsa-card.c: Jack 'Front Headphone 
Jack' is now unplugged
(  25.781|   0.000) D: [pulseaudio] device-port.c: Setting port 
analog-output-headphones to status no
(  25.781|   0.000) D: [pulseaudio] module-switch-on-port-available.c: finding 
port analog-output-headphones
(  25.781|   0.000) D: [alsa-sink-ALC892 Analog] alsa-mixer.c: Activating path 
analog-output


(  25.783|   0.000) I: [pulseaudio] module-device-restore.c: Restored volume: 
0:  39% 1:  39%
(  25.783|   0.000) I: [pulseaudio] module-device-restore.c: Restoring mute 
state for sink alsa_output.pci-0000_00_14.2.analog-stereo.
(  25.785|   0.001) D: [pulseaudio] core-subscribe.c: Dropped redundant event 
due to change event.
(  25.855|   0.070) D: [pulseaudio] module-alsa-card.c: Jack 'Front Headphone 
Jack' is now plugged in
(  25.855|   0.000) D: [pulseaudio] device-port.c: Setting port 
analog-output-headphones to status yes
(  25.855|   0.000) D: [pulseaudio] module-switch-on-port-available.c: finding 
port analog-output-headphones

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/874535

Title:
  Volume Slider Jumps, due to rapidly changing hardware jack sense state

Status in “alsa-driver” package in Ubuntu:
  Triaged

Bug description:
  In Oneiric Release,  The volume slider randomly jump down a notch or
  two for fraction of  a second, even when there is no audio playing on
  the system.  If mute is selected, the menu will quickly flip out of
  mute mode and back again.  This change actually affects the audio
  output, resulting in pops correlated with the volume changes.

  nVidia GF106 Audio Controller
  --- 
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
  ApportVersion: 1.23-0ubuntu4
  Architecture: amd64
  ArecordDevices:
   **** List of CAPTURE Hardware Devices ****
   card 0: Intel [HDA Intel], device 0: ALC892 Analog [ALC892 Analog]
     Subdevices: 1/1
     Subdevice #0: subdevice #0
  AudioDevicesInUse:
   USER        PID ACCESS COMMAND
   /dev/snd/controlC0:  jfrorie    9959 F.... pulseaudio
  Card0.Amixer.info:
   Card hw:0 'Intel'/'HDA Intel at 0xfb9f8000 irq 54'
     Mixer name : 'Realtek ALC892'
     Components : 'HDA:10ec0892,1462522c,00100302'
     Controls      : 35
     Simple ctrls  : 20
  Card2.Amixer.info:
   Card hw:2 'Generic'/'HD-Audio Generic at 0xfbcf8000 irq 55'
     Mixer name : 'ATI R6xx HDMI'
     Components : 'HDA:1002aa01,00aa0100,00100200'
     Controls      : 4
     Simple ctrls  : 1
  Card2.Amixer.values:
   Simple mixer control 'IEC958',0
     Capabilities: pswitch pswitch-joined penum
     Playback channels: Mono
     Mono: Playback [on]
  DistroRelease: Ubuntu 11.10
  InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release amd64 (20101007)
  Package: pulseaudio 1:1.0-0ubuntu3.1
  PackageArchitecture: amd64
  ProcEnviron:
   PATH=(custom, user)
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  ProcVersionSignature: Ubuntu 3.0.0-14.23-generic 3.0.9
  Tags:  oneiric running-unity
  Uname: Linux 3.0.0-14-generic x86_64
  UpgradeStatus: Upgraded to oneiric on 2011-10-14 (82 days ago)
  UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare
  dmi.bios.date: 11/16/2010
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: V25.0
  dmi.board.asset.tag: To Be Filled By O.E.M.
  dmi.board.name: X58A-GD45 (MS-7522)
  dmi.board.vendor: MSI
  dmi.board.version: 5.0
  dmi.chassis.asset.tag: To Be Filled By O.E.M.
  dmi.chassis.type: 3
  dmi.chassis.vendor: MICRO-STAR INTERNATIONAL CO.,LTD
  dmi.chassis.version: 5.0
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvrV25.0:bd11/16/2010:svnMSI:pnMS-7522:pvr5.0:rvnMSI:rnX58A-GD45(MS-7522):rvr5.0:cvnMICRO-STARINTERNATIONALCO.,LTD:ct3:cvr5.0:
  dmi.product.name: MS-7522
  dmi.product.version: 5.0
  dmi.sys.vendor: MSI

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/874535/+subscriptions

-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to     : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

Reply via email to