I only Kubuntu, and only ESR's... if I get a chance I will see if anything changed within the Kubuntu builds for 14.04,
-- You received this bug notification because you are a member of Desktop Packages, which is subscribed to xserver-xorg-video-nouveau in Ubuntu. https://bugs.launchpad.net/bugs/1044523 Title: Full Resolution not supported on LCD Status in “xserver-xorg-video-nouveau” package in Ubuntu: Expired Bug description: xserver-xorg-video-nouveau does not offer full resolutions for Sansui HDLCD185W Should offer 1280x768 and 1360x768 Highest offered is 1024x768 Confirmed that 1280x768 and 1360x768 are supported by the monitor using another system. Can not use the nVidia OEM drivers 96.x series for the AGP4x cards in the system due to the ABI changes in the X server. Modeline doesn't seem to correct the issue either. Linux marilyn 3.2.0-29-generic-pae #46-Ubuntu SMP Fri Jul 27 17:25:43 UTC 2012 i686 i686 i386 GNU/Linux Card and driver properly offers 1920x1080 for Vizio connected on port 2 for video playback $ dmesg | grep drm [ 26.568517] [drm] Initialized drm 1.1.0 20060810 [ 26.690861] [drm] nouveau 0000:01:00.0: Detected an NV10 generation card (0x017a00a5) [ 26.692951] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN [ 26.741811] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 26.741997] [drm] nouveau 0000:01:00.0: BMP BIOS found [ 26.742006] [drm] nouveau 0000:01:00.0: BMP version 5.39 [ 26.742014] [drm] nouveau 0000:01:00.0: Bios version 04.17.20.27 [ 26.742023] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 2.0 [ 26.742031] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 000088b8 [ 26.742040] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000302 00000000 [ 26.742048] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02010310 000088b8 [ 26.742054] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 04010212 00000000 [ 26.742200] [drm] nouveau 0000:01:00.0: Loading NV17 power sequencing microcode [ 26.742211] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xED30 [ 26.742259] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xF23E [ 26.742282] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xEE58 [ 26.757243] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xF552 [ 26.757253] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xF57F [ 26.757261] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xF033 [ 26.774693] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xF1D9 [ 26.796379] [drm] nouveau 0000:01:00.0: 0 available performance level(s) [ 26.796405] [drm] nouveau 0000:01:00.0: c: core 200MHz memory 332MHz [ 26.796993] [drm] nouveau 0000:01:00.0: Detected 64MiB VRAM [ 26.797671] [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture) [ 26.805073] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 26.805080] [drm] No driver support for vblank timestamp query. [ 26.805098] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [ 26.805105] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1) [ 26.805112] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [ 26.805118] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 3) [ 27.043988] [drm] nouveau 0000:01:00.0: allocated 1920x1080 fb: 0x49000, bo f5d9ee00 [ 27.044560] drm: registered panic notifier [ 27.044584] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0 [ 27.854276] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [ 27.854283] [drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output A [ 27.872099] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [ 27.872105] [drm] nouveau 0000:01:00.0: Output DVI-I-2 is running on CRTC 1 using output B [ 45.557141] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [ 45.595305] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0) [ 45.595311] [drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output A [ 45.853396] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [ 45.877949] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 2) [ 45.877955] [drm] nouveau 0000:01:00.0: Output DVI-I-2 is running on CRTC 1 using output B $ lspci | grep VGA 01:00.0 VGA compatible controller: NVIDIA Corporation NV17GL [Quadro NVS] (rev a3) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-nouveau/+bug/1044523/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
