I am having the same problem, and I hope I am not breaking some code of etiquette here, but as the original poster hasn't yet responded to Yash's request since 2010, I've run the command myself and post the results here.
HP Linux Imaging and Printing System (ver. 3.12.2) Dependency/Version Check Utility ver. 14.3 Copyright (c) 2011-14 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Note: hp-check can be run in three modes: 1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP. 2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run. 3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies). Saving output in log file: hp-check.log Initializing. Please wait... --------------- | SYSTEM INFO | --------------- Basic system information: Linux anne-Inspiron-2200 3.2.0-60-generic-pae #91-Ubuntu SMP Wed Feb 19 04:14:56 UTC 2014 i686 i686 i386 GNU/Linux Distribution: ubuntu 12.04 Checking Python version... OK, version 2.7.3 installed Checking PyQt 4.x version... OK, version 4.9.1 installed. Checking for CUPS... Status: scheduler is running Version: 1.5.3 error_log is set to level: warn Checking for dbus/python-dbus... dbus daemon is running. python-dbus version: 1.0.0 ------------------------------------ | COMPILE AND RUNTIME DEPENDENCIES | ------------------------------------ note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c). note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r). Checking for dependency: CUPS - Common Unix Printing System... OK, found. Checking for dependency: CUPS devel- Common Unix Printing System development files... OK, found. Checking for dependency: CUPS image - CUPS image development files... OK, found. Checking for dependency: DBus - Message bus system... OK, found. Checking for dependency: gcc - GNU Project C and C++ Compiler... OK, found. Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer... OK, found. Checking for dependency: libcrypto - OpenSSL cryptographic library... OK, found. Checking for dependency: libjpeg - JPEG library... OK, found. Checking for dependency: libnetsnmp-devel - SNMP networking library development files... OK, found. Checking for dependency: libpthread - POSIX threads library... OK, found. Checking for dependency: libtool - Library building support services... OK, found. Checking for dependency: libusb - USB library... OK, found. Checking for dependency: make - GNU make utility to maintain groups of programs... OK, found. Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)... OK, found. Checking for dependency: PolicyKit - Administrative policy framework... OK, found. Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4... OK, found. Checking for dependency: Python DBus - Python bindings for DBus... OK, found. Checking for dependency: Python devel - Python development files... OK, found. Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications... OK, found. Checking for dependency: Python XML libraries... OK, found. Checking for dependency: Python 2.3 or greater - Required for fax functionality... OK, found. Checking for dependency: Python 2.2 or greater - Python programming language... OK, found. Checking for dependency: Reportlab - PDF library for Python... OK, found. Checking for dependency: SANE - Scanning library... OK, found. Checking for dependency: SANE - Scanning library development files... OK, found. Checking for dependency: scanimage - Shell scanning program... OK, found. Checking for dependency: xsane - Graphical scanner frontend for SANE... OK, found. ---------------------- | HPLIP INSTALLATION | ---------------------- Currently installed HPLIP version... HPLIP 3.12.2 currently installed in '/usr/share/hplip'. Current contents of '/etc/hp/hplip.conf' file: # hplip.conf. Generated from hplip.conf.in by configure. [hplip] version=3.12.2 [dirs] home=/usr/share/hplip run=/var/run ppd=/usr/share/ppd/hplip/HP ppdbase=/usr/share/ppd/hplip doc=/usr/share/doc/hplip-doc/HTML icon=no cupsbackend=/usr/lib/cups/backend cupsfilter=/usr/lib/cups/filter drv=/usr/share/cups/drv # Following values are determined at configure time and cannot be changed. [configure] network-build=yes pp-build=yes gui-build=yes scanner-build=yes fax-build=yes dbus-build=yes cups11-build=no doc-build=yes shadow-build=no hpijs-install=yes foomatic-drv-install=yes foomatic-ppd-install=yes foomatic-rip-hplip-install=no hpcups-install=yes cups-drv-install=yes cups-ppd-install=no internal-tag=3.12.2 restricted-build=no ui-toolkit=qt4 qt3=no qt4=yes policy-kit=yes hpijs-only-build=no lite-build=no udev-acl-rules=yes hpcups-only-build=no hpijs-only-build=no Current contents of '/var/lib/hp/hplip.state' file: # hplip.state - HPLIP runtime persistent variables. [plugin] installed=0 eula=0 Current contents of '~/.hplip/hplip.conf' file: [last_used] device_uri = hp:/net/HP_Color_LaserJet_CP1514n?zc=NPI2E4058 [installation] date_time = 27/03/14 13:29:46 version = 3.12.2 -------------------------- | DISCOVERED USB DEVICES | -------------------------- No devices found. --------------------------------- | INSTALLED CUPS PRINTER QUEUES | --------------------------------- Hewlett-Packard-HP-Color-LaserJet-CP1514n ----------------------------------------- Type: Printer Device URI: hp:/net/HP_Color_LaserJet_CP1514n?zc=NPI2E4058 PPD: /etc/cups/ppd/Hewlett-Packard-HP-Color-LaserJet-CP1514n.ppd PPD Description: HP Color LaserJet cp1514n pcl3, hpcups 3.12.2 Printer status: printer Hewlett-Packard-HP-Color-LaserJet-CP1514n is idle. enabled since Thu 27 Mar 2014 12:59:18 GMT HP Linux Imaging and Printing System (ver. 3.12.2) System Tray Status Service ver. 2.0 Copyright (c) 2001-9 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. /usr/lib/python2.7/dist-packages/gtk-2.0/gtk/__init__.py:127: RuntimeWarning: PyOS_InputHook is not available for interactive use of PyGTK set_interactive(1) Communication status: Good ---------------------- | SANE CONFIGURATION | ---------------------- 'hpaio' in '/etc/sane.d/dll.conf'... 'hpaio' in '/etc/sane.d/dll.d/hplip'... OK, found. SANE backend 'hpaio' is properly set up. Checking output of 'scanimage -L'... No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). --------------------- | PYTHON EXTENSIONS | --------------------- Checking 'cupsext' CUPS extension... OK, found. Checking 'pcardext' Photocard extension... OK, found. Checking 'hpmudext' I/O extension... OK, found. Checking 'scanext' SANE scanning extension... OK, found. --------------- | USER GROUPS | --------------- anne adm dialout cdrom plugdev lpadmin admin sambashare error: User needs to be member of group 'lp' to enable print, scan & fax. User member of group 'lpadmin'. ----------- | SUMMARY | ----------- No errors or warnings. Done. -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to hplip in Ubuntu. https://bugs.launchpad.net/bugs/639608 Title: manual duplex printing missing Status in “hplip” package in Ubuntu: Confirmed Bug description: Binary package hint: hplip I have problem with 'manual duplex' printing on my HP CP1514n in Ubuntu. In 10.04 I select the double sided print option (print long edge). Print is now simplex printing, which is wrong. In 10.10beta there is a new option checkbox : Duplexer installed. Because I don't have a duplexer attached to my printer, I deselect this option. But then I cannot select double sided printing any more. What to do? I want first to print the even pages, then I want to place the printed stack (even pages) in the printer tray. When I at last acknowledge with the OK printer button, the printer shall print the odd pages in the correct order on the opposite side of the even pages. This works perfectly in Windows. Ubuntu (Linux) must have the same functionality! I believe a lot of people have the same problem! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/hplip/+bug/639608/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
