apport information ** Tags added: apport-collected sarah third-party-packages
** Description changed: Networkmanager has no option for "none" as inner authentication. MSCHAPv2, GTC and MD5 are the only options. The page http://ubuntuforums.org/showthread.php?t=1726522 suggests adding "none" as phase2-auth, but doing that syslog tells me the config for that network is invalid. However, this works fine with the wpa_supplicant config file ~/scowlan.conf: ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=root network={ ssid="PS-XWLAN" key_mgmt=WPA-EAP eap=PEAP phase1="peaplabel=0" phase2="none" identity="USERNAME" password="PASSWORD" } and running it like this works fine: wpa_supplicant -B -iwlan0 -c ~/scowlan.conf - I guess adding "none" as a recognizable option in networkmanager will do - (?) + I guess adding "none" as a recognizable option in networkmanager will do (?) + --- + ApportVersion: 2.20.1-0ubuntu2.6 + Architecture: amd64 + CurrentDesktop: X-Cinnamon + DistroRelease: Linux 18 + IfupdownConfig: + # interfaces(5) file used by ifup(8) and ifdown(8) + auto lo + iface lo inet loopback + InstallationDate: Installed on 2016-07-13 (340 days ago) + InstallationMedia: Linux Mint 18 "Sarah" - Release amd64 20160628 + IpRoute: + default via 10.20.16.1 dev wlan0 proto static metric 600 + 10.20.16.0/24 dev wlan0 proto kernel scope link src 10.20.16.108 metric 600 + 169.254.0.0/16 dev wlan0 scope link metric 1000 + NetworkManager.state: + [main] + NetworkingEnabled=true + WirelessEnabled=true + WWANEnabled=true + Package: network-manager 1.2.6-0ubuntu0.16.04.1 [origin: Ubuntu] + PackageArchitecture: amd64 + ProcVersionSignature: Ubuntu 4.4.0-59.80-generic 4.4.35 + Tags: third-party-packages sarah + Uname: Linux 4.4.0-59-generic x86_64 + UnreportableReason: This is not an official Linux package. Please remove any third party package and try again. + UpgradeStatus: No upgrade log present (probably fresh install) + UserGroups: adm backup cdrom dip lpadmin plugdev sambashare sudo vboxusers wireshark + _MarkForUpload: True + nmcli-dev: + DEVICE TYPE STATE DBUS-PATH CONNECTION CON-UUID CON-PATH + wlan0 wifi connected /org/freedesktop/NetworkManager/Devices/2 Auto Lara 7a2ab149-0755-4e2f-9e85-78837d738275 /org/freedesktop/NetworkManager/ActiveConnection/0 + eth0 ethernet unavailable /org/freedesktop/NetworkManager/Devices/0 -- -- -- + ttyACM1 gsm unavailable /org/freedesktop/NetworkManager/Devices/3 -- -- -- + lo loopback unmanaged /org/freedesktop/NetworkManager/Devices/1 -- -- -- + nmcli-nm: + RUNNING VERSION STATE STARTUP CONNECTIVITY NETWORKING WIFI-HW WIFI WWAN-HW WWAN + running 1.2.6 connected started full enabled enabled enabled enabled enabled ** Attachment added: "CRDA.txt" https://bugs.launchpad.net/bugs/1578589/+attachment/4898377/+files/CRDA.txt -- You received this bug notification because you are a member of Desktop Packages, which is subscribed to network-manager in Ubuntu. https://bugs.launchpad.net/bugs/1578589 Title: Add support for <none> as inner authentication in PEAP Status in network-manager package in Ubuntu: Expired Bug description: Networkmanager has no option for "none" as inner authentication. MSCHAPv2, GTC and MD5 are the only options. The page http://ubuntuforums.org/showthread.php?t=1726522 suggests adding "none" as phase2-auth, but doing that syslog tells me the config for that network is invalid. However, this works fine with the wpa_supplicant config file ~/scowlan.conf: ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=root network={ ssid="PS-XWLAN" key_mgmt=WPA-EAP eap=PEAP phase1="peaplabel=0" phase2="none" identity="USERNAME" password="PASSWORD" } and running it like this works fine: wpa_supplicant -B -iwlan0 -c ~/scowlan.conf I guess adding "none" as a recognizable option in networkmanager will do (?) --- ApportVersion: 2.20.1-0ubuntu2.6 Architecture: amd64 CurrentDesktop: X-Cinnamon DistroRelease: Linux 18 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2016-07-13 (340 days ago) InstallationMedia: Linux Mint 18 "Sarah" - Release amd64 20160628 IpRoute: default via 10.20.16.1 dev wlan0 proto static metric 600 10.20.16.0/24 dev wlan0 proto kernel scope link src 10.20.16.108 metric 600 169.254.0.0/16 dev wlan0 scope link metric 1000 NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true Package: network-manager 1.2.6-0ubuntu0.16.04.1 [origin: Ubuntu] PackageArchitecture: amd64 ProcVersionSignature: Ubuntu 4.4.0-59.80-generic 4.4.35 Tags: third-party-packages sarah Uname: Linux 4.4.0-59-generic x86_64 UnreportableReason: This is not an official Linux package. Please remove any third party package and try again. UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm backup cdrom dip lpadmin plugdev sambashare sudo vboxusers wireshark _MarkForUpload: True nmcli-dev: DEVICE TYPE STATE DBUS-PATH CONNECTION CON-UUID CON-PATH wlan0 wifi connected /org/freedesktop/NetworkManager/Devices/2 Auto Lara 7a2ab149-0755-4e2f-9e85-78837d738275 /org/freedesktop/NetworkManager/ActiveConnection/0 eth0 ethernet unavailable /org/freedesktop/NetworkManager/Devices/0 -- -- -- ttyACM1 gsm unavailable /org/freedesktop/NetworkManager/Devices/3 -- -- -- lo loopback unmanaged /org/freedesktop/NetworkManager/Devices/1 -- -- -- nmcli-nm: RUNNING VERSION STATE STARTUP CONNECTIVITY NETWORKING WIFI-HW WIFI WWAN-HW WWAN running 1.2.6 connected started full enabled enabled enabled enabled enabled --- ApportVersion: 2.20.1-0ubuntu2.6 Architecture: amd64 CurrentDesktop: X-Cinnamon DistroRelease: Linux 18 IfupdownConfig: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback InstallationDate: Installed on 2016-07-13 (340 days ago) InstallationMedia: Linux Mint 18 "Sarah" - Release amd64 20160628 IpRoute: default via 10.20.16.1 dev wlan0 proto static metric 600 10.20.16.0/24 dev wlan0 proto kernel scope link src 10.20.16.108 metric 600 169.254.0.0/16 dev wlan0 scope link metric 1000 NetworkManager.state: [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true Package: network-manager 1.2.6-0ubuntu0.16.04.1 [origin: Ubuntu] PackageArchitecture: amd64 ProcVersionSignature: Ubuntu 4.4.0-59.80-generic 4.4.35 Tags: third-party-packages sarah Uname: Linux 4.4.0-59-generic x86_64 UnreportableReason: This is not an official Linux package. Please remove any third party package and try again. UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm backup cdrom dip lpadmin plugdev sambashare sudo vboxusers wireshark _MarkForUpload: True nmcli-dev: DEVICE TYPE STATE DBUS-PATH CONNECTION CON-UUID CON-PATH wlan0 wifi connected /org/freedesktop/NetworkManager/Devices/2 Auto Lara 7a2ab149-0755-4e2f-9e85-78837d738275 /org/freedesktop/NetworkManager/ActiveConnection/0 eth0 ethernet unavailable /org/freedesktop/NetworkManager/Devices/0 -- -- -- ttyACM1 gsm unavailable /org/freedesktop/NetworkManager/Devices/3 -- -- -- lo loopback unmanaged /org/freedesktop/NetworkManager/Devices/1 -- -- -- nmcli-nm: RUNNING VERSION STATE STARTUP CONNECTIVITY NETWORKING WIFI-HW WIFI WWAN-HW WWAN running 1.2.6 connected started full enabled enabled enabled enabled enabled To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1578589/+subscriptions -- Mailing list: https://launchpad.net/~desktop-packages Post to : desktop-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~desktop-packages More help : https://help.launchpad.net/ListHelp
