Will do - fortunately, I still have that PC. Give me a few days though.
Cheers,
Michael
Am 18.05.2018 um 16:58 schrieb Christopher M. Penalver:
> Michael Schmitz, to confirm this is still a problem in Ubuntu, could you
> please test http://cdimage.ubuntu.com/daily-live/current/ and advise to
> the results?
>
> ** Project changed: nouveau => xserver-xorg-video-nouveau (Ubuntu)
>
> ** Changed in: xserver-xorg-video-nouveau (Ubuntu)
> Status: New => Incomplete
>
> ** Changed in: xserver-xorg-video-nouveau (Ubuntu)
> Importance: Undecided => Low
>
> ** Tags removed: needs-apport-collect
>
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to xserver-xorg-video-nouveau in Ubuntu.
https://bugs.launchpad.net/bugs/549256
Title:
[GeForce 7025 / nForce 630a] video flicker on any I/O activity with
nouveau; OK with nv driver
Status in xserver-xorg-video-nouveau package in Ubuntu:
Incomplete
Bug description:
Binary package hint: xserver-xorg-video-nouveau
Expectation: Default Xorg driver should work with no video artifacts.
Observation: Bad screen flicker with default Xorg driver.
Details: I installed the 10.04 beta from CD on Wednesday
(incidentially, compliments for the smooth install). Already upon
installation, the display did flicker badly whenever the CD was read
or even the mouse moved. Flicker did already start at the initial
splash screen. The system was fully responsive otherwise. On reboot
post-installation, gdm came up OK but with the same flicker problems.
The 'Monitors' control panel only offered the 2048x1536 resolution at
80 Hz with no other options. Tried to install and use one of the non-
free nvidia drivers, this failed because the nouveau kernel module was
loaded always and could not be unloaded (drm loads nouveau before
framebuffer console init. as near as I can make out). With nvidia-
current unable to load, the X server could not use the 'nvidia'
driver. Switching xorg.conf to use the 'nv' driver results in a much
better screen display (only occasional flicker) although the driver
only supports 2048x1536 at 60 Hz. 1600x1200@85 Hz is useable.
Kernel message buffer excerpt:
[ 4.777915] [drm] Initialized drm 1.1.0 20060810
[ 4.807773] ACPI: PCI Interrupt Link [LMC9] enabled at IRQ 22
[ 4.807779] nouveau 0000:00:0d.0: PCI INT A -> Link[LMC9] -> GSI 22
(level, low) -> IRQ 22
[ 4.807783] nouveau 0000:00:0d.0: setting latency timer to 64
[ 4.809992] [drm] nouveau 0000:00:0d.0: failed to evaluate _DSM: 5
[ 4.810217] [drm] nouveau 0000:00:0d.0: Detected an NV40 generation card
(0x04c000a2)
[ 4.810513] [drm] nouveau 0000:00:0d.0: Attempting to load BIOS image from
PROM
[ 4.810519] [drm] nouveau 0000:00:0d.0: ... BIOS signature not found
[ 4.810520] [drm] nouveau 0000:00:0d.0: Attempting to load BIOS image from
PRAMIN
[ 4.854556] [drm] nouveau 0000:00:0d.0: ... appears to be valid
[ 4.854559] [drm] nouveau 0000:00:0d.0: BIT BIOS found
[ 4.854561] [drm] nouveau 0000:00:0d.0: Bios version 05.61.32.28
[ 4.854563] [drm] nouveau 0000:00:0d.0: BIT table 'd' not found
[ 4.854565] [drm] nouveau 0000:00:0d.0: Found Display Configuration Block
version 3.0
[ 4.854568] [drm] nouveau 0000:00:0d.0: DCB connector table: VHER 0x30 5
10 2
[ 4.854571] [drm] nouveau 0000:00:0d.0: 0: 0x00000000: type 0x00 idx 0
tag 0xff
[ 4.854573] [drm] nouveau 0000:00:0d.0: 1: 0x00001131: type 0x31 idx 1
tag 0x07
[ 4.854575] [drm] nouveau 0000:00:0d.0: 2: 0x00000110: type 0x10 idx 1
tag 0xff
[ 4.854577] [drm] nouveau 0000:00:0d.0: 3: 0x00000111: type 0x11 idx 1
tag 0xff
[ 4.854579] [drm] nouveau 0000:00:0d.0: 4: 0x00000113: type 0x13 idx 1
tag 0xff
[ 4.854581] [drm] nouveau 0000:00:0d.0: Raw DCB entry 0: 01000310 00000023
[ 4.854583] [drm] nouveau 0000:00:0d.0: Raw DCB entry 1: 00110204 942b0003
[ 4.854588] [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 0 at
offset 0xD9C9
[ 4.854591] [drm] nouveau 0000:00:0d.0: ======= misaligned reg 0x0060081D
=======
[ 4.854648] [drm] nouveau 0000:00:0d.0: ======= misaligned reg 0x0060081D
=======
[ 4.854748] [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 1 at
offset 0xDB17
[ 4.854749] [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 2 at
offset 0xDB18
[ 4.854799] [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 3 at
offset 0xDC9A
[ 4.854803] [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 4 at
offset 0xDCE3
[ 4.861274] lp0: using parport0 (interrupt-driven).
[ 4.865006] [TTM] Zone kernel: Available graphics memory: 444292 kiB.
[ 4.865009] [TTM] Zone highmem: Available graphics memory: 448232 kiB.
[ 4.865018] [drm] nouveau 0000:00:0d.0: 128 MiB VRAM
[ 4.865912] [drm] nouveau 0000:00:0d.0: 64 MiB GART (aperture)
[ 4.868624] [drm] nouveau 0000:00:0d.0: Allocating FIFO number 0
[ 4.868891] [drm] nouveau 0000:00:0d.0: nouveau_channel_alloc: initialised
FIFO 0
[ 4.868896] [drm] nouveau 0000:00:0d.0: Initial CRTC_OWNER is 0
[ 4.868901] [drm] nouveau 0000:00:0d.0: Saving VGA fonts
[ 4.908706] [drm] nouveau 0000:00:0d.0: DCB type 4 not known
[ 4.908710] [drm] nouveau 0000:00:0d.0: Detected a VGA connector
[ 4.909936] [drm] nouveau 0000:00:0d.0: Setting dpms mode 3 on vga encoder
(output 0)
[ 5.037394] [drm] nouveau 0000:00:0d.0: allocated 2048x1536 fb: 0x49000,
bo f67bb400
[ 5.037515] fb0: nouveaufb frame buffer device
[ 5.037517] registered panic notifier
[ 5.037523] [drm] Initialized nouveau 0.0.15 20090420 for 0000:00:0d.0 on
minor 0
[ 5.037985] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 5.037992] HDA Intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 21
(level, low) -> IRQ 21
[ 5.038024] HDA Intel 0000:00:05.0: setting latency timer to 64
[ 5.039464] vga16fb: initializing
[ 5.039467] vga16fb: mapped to 0xc00a0000
[ 5.039574] fb1: VGA16 VGA frame buffer device
[ 5.115037] [drm] nouveau 0000:00:0d.0: Setting dpms mode 0 on vga encoder
(output 0)
[ 5.115043] [drm] nouveau 0000:00:0d.0: Output VGA-1 is running on CRTC 0
using output A
[ 5.135352] Console: switching to colour frame buffer device 256x96
ProblemType: Bug
Architecture: i386
CheckboxSubmission: 249c39fafc7fdc4284046750da89b61e
CheckboxSystem: edda5d4f616ca792bf437989cb597002
Date: Sat Mar 27 13:39:30 2010
DistroRelease: Ubuntu 10.04
DkmsStatus:
nvidia-current, 195.36.15, 2.6.32-16-generic, i686: installed
nvidia-173, 173.14.22, 2.6.32-16-generic, i686: installed
InstallationMedia: Ubuntu 10.04 "Lucid Lynx" - Beta i386 (20100318)
Lsusb:
Bus 002 Device 002: ID 046d:c016 Logitech, Inc. M-UV69a/HP M-UV96 Optical
Wheel Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
MachineType: System manufacturer System Product Name
Package: xserver-xorg-video-nouveau 1:0.0.15+git20100219+9b4118d-0ubuntu4
ProcCmdLine: BOOT_IMAGE=/vmlinuz-2.6.32-16-generic
root=UUID=41db8444-85be-4f70-835b-f083d9b4aed1 ro quiet splash
ProcEnviron:
LANG=en_NZ.utf8
SHELL=/bin/bash
ProcVersionSignature: Ubuntu 2.6.32-16.25-generic
SourcePackage: xserver-xorg-video-nouveau
Uname: Linux 2.6.32-16-generic i686
dmi.bios.date: 06/29/2009
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: 0708
dmi.board.asset.tag: To Be Filled By O.E.M.
dmi.board.name: M2N68-AM Plus
dmi.board.vendor: ASUSTeK Computer INC.
dmi.board.version: Rev X.0x
dmi.chassis.asset.tag: Asset-1234567890
dmi.chassis.type: 3
dmi.chassis.vendor: Chassis Manufacture
dmi.chassis.version: Chassis Version
dmi.modalias:
dmi:bvnAmericanMegatrendsInc.:bvr0708:bd06/29/2009:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnM2N68-AMPlus:rvrRevX.0x:cvnChassisManufacture:ct3:cvrChassisVersion:
dmi.product.name: System Product Name
dmi.product.version: System Version
dmi.sys.vendor: System manufacturer
glxinfo: Error: [Errno 2] No such file or directory
system:
distro: Ubuntu
codename: lucid
architecture: i686
kernel: 2.6.32-16-generic
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-nouveau/+bug/549256/+subscriptions
--
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help : https://help.launchpad.net/ListHelp
