# uname -a
Linux rare-stork 4.15.0-33-generic #36-Ubuntu SMP Wed Aug 15 13:42:17 UTC 2018
s390x s390x s390x GNU/Linux
# ip -4 addr show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default qlen 1000
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
3: bond0.100@bond0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
state UP group default qlen 1000
inet 10.132.106.86/24 brd 10.132.106.255 scope global bond0.100
valid_lft forever preferred_lft forever
# ip link set dev bond0 down
# ip -4 addr show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default qlen 1000
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
# ip link set dev bond0 up
# ip -4 addr show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default qlen 1000
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
3: bond0.100@bond0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
state UP group default qlen 1000
inet 10.132.106.86/24 brd 10.132.106.255 scope global bond0.100
valid_lft forever preferred_lft forever
#
Same results on a lxd container on a bionic kernel.
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1790098
Title:
vlan created on bond fails auto activation on updating parent network
bond
Status in Ubuntu on IBM z Systems:
Incomplete
Status in network-manager package in Ubuntu:
Incomplete
Bug description:
Auto activation of Vlan created over network-bond fails if bond is
deactivated and reactivated.
Contact Information = Abhiram Kulkarni(abhir...@in.ibm.com), Mandar
Deshpande(manda...@in.ibm.com)
---uname output---
Linux S36MANDAR 4.15.0-20-generic #21-Ubuntu SMP Tue Apr 24 06:14:23 UTC 2018
s390x s390x s390x GNU/Linux
Machine Type = s390x
---Debugger---
A debugger is not configured
---Steps to Reproduce---
1. Created a network bond with static IP address (and no IPv6 address);
active backup mode; ARP polling; single slave.
2. Created a VLAN using said network bond with static IPv4 address
(and no IPv6 address).
3. Can ping from the appliance to a target on both links (the parent
bond and the VLAN).
4. Switched to another slave for the created bond
5. Can still ping from the appliance to a target via the parent bond;
however, cannot ping to the target via the VLAN.
=============================================================================
Detailed steps:
1. Initial setup:
============
root@S36MANDAR:~# nmcli c s
NAME UUID TYPE DEVICE
enc1a80 c3a2037d-60a3-3cb4-9234-45aed55f7093 ethernet enc1a80
enc8f00 2423add6-1464-3765-877c-a214dc497492 ethernet enc8f00
enc1d40 ff2d70f8-130e-3dc6-ab24-1dba07563605 ethernet --
2. Create Netwrok-bond with one slave:
================================
root@S36MANDAR:~# nmcli c add type bond con-name mybond1 ifname mybond1
ipv4.method disabled ipv6.method ignore
Connection 'mybond1' (4b918a65-43a6-4ec3-b3c4-388ed52b116d) successfully
added.
root@S36MANDAR:~# nmcli con add type ethernet ifname enc1d40 master mybond1
Connection 'bond-slave-enc1d40' (cfe4b245-3dda-4f45-b7b4-6d40d144a02f)
successfully added.
root@S36MANDAR:~# nmcli con up bond-slave-enc1d40
Connection successfully activated (D-Bus active path:
/org/freedesktop/NetworkManager/ActiveConnection/18)
root@S36MANDAR:~# nmcli c s
NAME UUID TYPE DEVICE
bond-slave-enc1d40 cfe4b245-3dda-4f45-b7b4-6d40d144a02f ethernet enc1d40
enc1a80 c3a2037d-60a3-3cb4-9234-45aed55f7093 ethernet enc1a80
enc8f00 2423add6-1464-3765-877c-a214dc497492 ethernet enc8f00
mybond1 4b918a65-43a6-4ec3-b3c4-388ed52b116d bond mybond1
enc1d40 ff2d70f8-130e-3dc6-ab24-1dba07563605 ethernet --
3. Create vlan over mybond1:
=======================
root@S36MANDAR:~# nmcli con add type vlan con-name vlanbond.100 ifname
vlanbond.100 dev mybond1 id 100 ipv4.method disabled ipv6.method ignore
Connection 'vlanbond.100' (e054df42-97a0-492b-b2c9-b9571077493e) successfully
added.
root@S36MANDAR:~# nmcli c s
NAME UUID TYPE DEVICE
bond-slave-enc1d40 cfe4b245-3dda-4f45-b7b4-6d40d144a02f ethernet enc1d40
enc1a80 c3a2037d-60a3-3cb4-9234-45aed55f7093 ethernet enc1a80
enc8f00 2423add6-1464-3765-877c-a214dc497492 ethernet enc8f00
mybond1 4b918a65-43a6-4ec3-b3c4-388ed52b116d bond mybond1
vlanbond.100 e054df42-97a0-492b-b2c9-b9571077493e vlan
vlanbond.100
enc1d40 ff2d70f8-130e-3dc6-ab24-1dba07563605 ethernet --
4. Reactivate bond :
=================
root@S36MANDAR:~# nmcli con up mybond1
Connection successfully activated (master waiting for slaves) (D-Bus active
path: /org/freedesktop/NetworkManager/ActiveConnection/30)
root@S36MANDAR:~# nmcli c s
NAME UUID TYPE DEVICE
enc1a80 c3a2037d-60a3-3cb4-9234-45aed55f7093 ethernet enc1a80
enc1d40 ff2d70f8-130e-3dc6-ab24-1dba07563605 ethernet enc1d40
enc8f00 2423add6-1464-3765-877c-a214dc497492 ethernet enc8f00
mybond1 4b918a65-43a6-4ec3-b3c4-388ed52b116d bond mybond1
bond-slave-enc1d40 cfe4b245-3dda-4f45-b7b4-6d40d144a02f ethernet --
encw1810 4ddeb38e-d5f7-3814-abb7-be50b8da874e ethernet --
vlanbond.100 e054df42-97a0-492b-b2c9-b9571077493e vlan --
As is seen, vlan(vlanbond.100) did not get activated
Now, if manually I make vlan connection up, it gets activated:
root@S36MANDAR:~# nmcli con up vlanbond.100
NAME UUID TYPE DEVICE
bond-slave-enc1d40 cfe4b245-3dda-4f45-b7b4-6d40d144a02f ethernet enc1d40
enc1a80 c3a2037d-60a3-3cb4-9234-45aed55f7093 ethernet enc1a80
enc8f00 2423add6-1464-3765-877c-a214dc497492 ethernet enc8f00
mybond1 4b918a65-43a6-4ec3-b3c4-388ed52b116d bond mybond1
vlanbond.100 e054df42-97a0-492b-b2c9-b9571077493e vlan
vlanbond.100
enc1d40 ff2d70f8-130e-3dc6-ab24-1dba07563605 ethernet --
encw1810 4ddeb38e-d5f7-3814-abb7-be50b8da874e ethernet --
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-z-systems/+bug/1790098/+subscriptions
--
Mailing list: https://launchpad.net/~desktop-packages
Post to : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help : https://help.launchpad.net/ListHelp
