You don't have the fix installed. The fix is in:

  ubuntu-drivers-common 1:0.9.7.6ubuntu3.1

and not in:

  ubuntu-drivers-common 1:0.9.7.6ubuntu3

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to ubuntu-drivers-common in Ubuntu.
https://bugs.launchpad.net/bugs/2060268

Title:
  Phantom "Unknown Display" shown in Settings after installing the
  Nvidia driver

Status in OEM Priority Project:
  New
Status in linux package in Ubuntu:
  Invalid
Status in nvidia-graphics-drivers-470 package in Ubuntu:
  Won't Fix
Status in nvidia-graphics-drivers-535 package in Ubuntu:
  Won't Fix
Status in nvidia-graphics-drivers-545 package in Ubuntu:
  Won't Fix
Status in nvidia-graphics-drivers-550 package in Ubuntu:
  Won't Fix
Status in ubuntu-drivers-common package in Ubuntu:
  Fix Released
Status in ubuntu-drivers-common source package in Jammy:
  Fix Committed
Status in ubuntu-drivers-common source package in Noble:
  Fix Committed

Bug description:
  [ Impact ]

  After installing Nvidia driver 545 on a single (27") monitor system,
  Settings shows a phantom 46" monitor of the same resolution.

  It looks like the phantom monitor is /dev/dri/card0 which is still
  controlled by simpledrm, while Nvidia uses /dev/dri/card1.

  This also seems to be triggering bug 2062426 and bug 2066126.

  [ Temporary Workaround ]

  1. sudo rm /dev/dri/card0
  2. Log in again.

  [ Permanent Workaround ]

  Add kernel parameter: initcall_blacklist=simpledrm_platform_driver_init
  Beware that this has side-effects: see comment #37

  [ Test Plan - Nvidia case ]

  1. Set up a DESKTOP where the only GPU enabled is an Nvidia one.
  2. Open the 'Additional Drivers' app to install a supported Nvidia driver.
  3. Reboot and verify the Nvidia driver is now active (lspci -k should mention 
'nvidia' and not 'nouveau').
  4. Open Settings and verify the only monitors shown are your real monitors.

  [ Regression Test Plan - Intel/AMD graphics ]

  1. Set up a machine with integrated graphics only.
  2. Reboot.
  3. Verify that you are able to log into the Ubuntu Desktop Wayland session.
  4. Run `apt install nvidia-driver-535`.
  5. Reboot.
  6. Verify that you are able to log into the Ubuntu Desktop Wayland session.

  [ Regression Test Plan - Virtual machines ]

  1. Set up a virtual machine without any graphics acceleration (vmware, 
virtio...)
  2. Reboot.
  3. Verify that you are able to log into the Ubuntu Desktop Wayland session.
  4. Run `sudo apt install nvidia-driver-535`.
  5. Reboot.
  6. Verify that you are able to log into the Ubuntu Desktop Wayland session.
  7. Optionally go back to point 4, and try with nvidia-driver-550.

  [ Regression Test Plan - Nvidia+LUKS ]

  1. Set up a desktop machine (not a laptop) with an Nvidia GPU and encrypted 
disk.
  2. Open the 'Additional Drivers' app to install a supported Nvidia driver.
  3. Reboot
  4. Verify that you see the password prompt for decrypting the disk.

  [ Where problems could occur ]

  Removing the simpledrm card is only safe when it's not being used. If
  somehow a machine wasn't using the installed Nvidia driver then there
  could be a risk of deleting the only working display.

  One case where this could happen is if the Nvidia driver would allow
  being loaded even without any nvidia hardware present: if that is the
  case, "Regression Test Plan - Virtual machines" would fail.

  [ Other Info ]

  ProblemType: Bug
  ApportVersion: 2.28.0-0ubuntu1
  Architecture: amd64
  AudioDevicesInUse:
   USER        PID ACCESS COMMAND
   /dev/snd/seq:        dan        4631 F.... pipewire
   /dev/snd/controlC1:  dan        4636 F.... wireplumber
  CRDA: N/A
  CasperMD5CheckResult: pass
  DistroRelease: Ubuntu 24.04
  InstallationDate: Installed on 2024-01-04 (92 days ago)
  InstallationMedia: Ubuntu 24.04 "Noble Numbat" - Daily amd64 (20231127)
  MachineType: Intel(R) Client Systems NUC12DCMi7
  NonfreeKernelModules: nvidia_modeset nvidia
  Package: linux (not installed)
  ProcEnviron:
   LANG=en_US.UTF-8
   PATH=(custom, no user)
   SHELL=/bin/bash
   TERM=xterm-256color
   XDG_RUNTIME_DIR=<set>
  ProcFB: 0 simpledrmdrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-6.8.0-11-generic 
root=UUID=8434774e-88f2-4e3f-adb8-2eb07dff3cf9 ro quiet loglevel=3 splash 
vt.handoff=7
  ProcVersionSignature: Ubuntu 6.8.0-11.11-generic 6.8.0-rc4
  RelatedPackageVersions:
   linux-restricted-modules-6.8.0-11-generic N/A
   linux-backports-modules-6.8.0-11-generic  N/A
   linux-firmware                            20240318.git3b128b60-0ubuntu1
  Tags: noble
  Uname: Linux 6.8.0-11-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sudo users
  _MarkForUpload: True
  dmi.bios.date: 12/20/2021
  dmi.bios.release: 5.24
  dmi.bios.vendor: Intel Corp.
  dmi.bios.version: EDADL579.0046.2021.1220.2351
  dmi.board.name: NUC12EDBi7
  dmi.board.vendor: Intel Corporation
  dmi.board.version: M27908-302
  dmi.chassis.type: 35
  dmi.chassis.vendor: Intel Corporation
  dmi.chassis.version: 2.0
  dmi.ec.firmware.release: 3.7
  dmi.modalias: 
dmi:bvnIntelCorp.:bvrEDADL579.0046.2021.1220.2351:bd12/20/2021:br5.24:efr3.7:svnIntel(R)ClientSystems:pnNUC12DCMi7:pvrM30143-302:rvnIntelCorporation:rnNUC12EDBi7:rvrM27908-302:cvnIntelCorporation:ct35:cvr2.0:skuRNUC12DCMi70000:
  dmi.product.family: DC
  dmi.product.name: NUC12DCMi7
  dmi.product.sku: RNUC12DCMi70000
  dmi.product.version: M30143-302
  dmi.sys.vendor: Intel(R) Client Systems

To manage notifications about this bug go to:
https://bugs.launchpad.net/oem-priority/+bug/2060268/+subscriptions


-- 
Mailing list: https://launchpad.net/~desktop-packages
Post to     : desktop-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~desktop-packages
More help   : https://help.launchpad.net/ListHelp

Reply via email to