Hi, Good to hear about your progress Chin Luh, and thanks for your help Stephane!
I’m trying with gcc-9 for everything but modules/console, which needs clang as Stephane pointed out. That is quite annoying and I hope that Apple fixes the issue in their Catalina SDK:s at some point. The next error I got was when compiling matio, even though it was turned off using –without-matio. The archiver ar complains that it cannot find the binary (which is correct, as it wasn’t compiled). I had to remove matio from the makefile in modules to get past this. Did you see this too? Except from that, everything compiles and runs without graphics. So that is a step forward! Cheers, Arvid From: dev <dev-boun...@lists.scilab.org> on behalf of Chin Luh Tan <chinluh....@bytecode-asia.com> Reply to: List dedicated to the development of Scilab <dev@lists.scilab.org> Date: Monday, 20 April 2020 at 17:55 To: List dedicated to the development of Scilab <dev@lists.scilab.org> Subject: Re: [Scilab-Dev] Compiling Scilab for macOS Hi Stephane, I tried the patch 21221 but I still get the same linker error: ./scilab-adv-cli Scilab startup function detected that the function proposed to the engine is the wrong one. Usually, it comes from a linker problem in your distribution/OS. Here, Scilab should have 'libscijvm' defined but gets 'libscijvm-disable' instead. If you do not know what it means, please report a bug on http://bugzilla.scilab.org/. If you do, you probably know that you should change the link order in SCI/modules/Makefile.am I hv also patch the jogamp files as suggested by your previous email. Please advice what I might have miss out. Thanks again. Regards, Chin Luh ---- On Mon, 20 Apr 2020 21:06:52 +0800 Chin Luh Tan <chinluh....@bytecode-asia.com> wrote ---- Hi Stephane, I am just about to reply you to update the current status. Before I add the other files as mentioned by you in this email (i just replace the 2 files mentioned previously), the build still successful (with quite some warnings) scilab-cli run fine, but the scilab and scilab-adv-cli gives following error: ./scilab-adv-cli Scilab startup function detected that the function proposed to the engine is the wrong one. Usually, it comes from a linker problem in your distribution/OS. Here, Scilab should have 'libscijvm' defined but gets 'libscijvm-disable' instead. If you do not know what it means, please report a bug on http://bugzilla.scilab.org/. If you do, you probably know that you should change the link order in SCI/modules/Makefile.am I am yet to you your suggestion below: If you manage to obtain a successful build, then you will encounter the link ordre problem. That's where I am stuck now. However, using https://codereview.scilab.org/#/c/21211/<https://antispam.utc.fr/proxy/2/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/antispam.utc.fr/proxy/2/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/codereview.scilab.org/#/c/21211/> will allow you to use Scilab in -nw mode without any problem. But in the full GUI mode, clc, tohome, prompt are broken (no crash, just the message "This feature has not been implemented in this mode"). Thanks again. Regards, Chin Luh ---- On Mon, 20 Apr 2020 20:58:52 +0800 Stéphane Mottelet <stephane.motte...@utc.fr<mailto:stephane.motte...@utc.fr>> wrote ---- _______________________________________________ dev mailing list dev@lists.scilab.org http://lists.scilab.org/mailman/listinfo/dev Hello, Le 19/04/2020 à 13:09, Chin Luh Tan a écrit : As I had start with brew, so I just tried to cont using the brew before I switch to fink if no success, and in fact, I get the similar error: [javac] /Users/kennethkoh/scilab-6.1/scilab/modules/graphic_objects/src/java/org/scilab/modules/graphic_objects/xmlloader/CSSParser.java:17: error: package javax.annotation does not exist [javac] @javax.annotation.Generated("JFlex") [javac] ^ [javac] /Users/kennethkoh/scilab-6.1/scilab/modules/graphic_objects/src/java/org/scilab/modules/graphic_objects/CallGraphicController.java:68: warning: [deprecation] Double(double) in Double has been deprecated ... ... [javac] Note: Some input files use unchecked or unsafe operations. [javac] Note: Recompile with -Xlint:unchecked for details. [javac] 1 error [javac] 12 warnings ^ Do correct me If I did anything wrong, my steps to reach here: 1. git scilab master 2. svn checkout pre-requisite as describe in https://wiki.scilab.org/Compiling%20Scilab%20under%20MacOSX#preview<https://antispam.utc.fr/proxy/2/c3RlcGhhbmUubW90dGVsZXRAdXRjLmZy/wiki.scilab.org/Compiling%20Scilab%20under%20MacOSX#preview> 3. patch change #21438 4. manual install ant: Java Configuration: JAVA_HOME ........... = JAVAC ............... = /Library/Java/JavaVirtualMachines/adoptopenjdk-8.jdk/Contents/Home/bin/javac JAVA_CLASSPATH ...... = JAVA_VERSION ........ = 1.8 JAVAC_FLAGS ......... = -g JAVA_JNI_INCLUDE .... = -I/Library/Java/JavaVirtualMachines/adoptopenjdk-8.jdk/Contents/Home/include -I/Library/Java/JavaVirtualMachines/adoptopenjdk-8.jdk/Contents/Home/include/darwin JAVA_JNI_LIBS ....... = -framework JavaVM JAVA_JNI_LIBS_PRELOAD = JAVA ................ = /Library/Java/JavaVirtualMachines/adoptopenjdk-8.jdk/Contents/Home/bin/java JAVADOC ............. = /Library/Java/JavaVirtualMachines/adoptopenjdk-8.jdk/Contents/Home/bin/javadoc JAR ................. = /Library/Java/JavaVirtualMachines/adoptopenjdk-8.jdk/Contents/Home/bin/jar ANT ................. = /Users/kennethkoh/Downloads/apache-ant-1.10.7/bin/ant 5. Get the jogl2.4 from rc. I am not sure this step is correct, but i just download 3 xz files, unzip them, and copy jogl-all.jar and glugen-rt.jar and replace in scilab thirdparty folder jogl2.jar and glugen2-rt.jar. You also need to replace the following files in lib/thirdparty libgluegen2-rt.jnilib libjogl_desktop.jnilib libnativewindow_macosx.jnilib libjogl_cg.jnilib libnativewindow_awt.jnilib libnewt.jnilib by the corresponding *.dylib which are in jogamp-all-patforms/lib/macosx-universal S. -- Stéphane Mottelet Ingénieur de recherche EA 4297 Transformations Intégrées de la Matière Renouvelable Département Génie des Procédés Industriels Sorbonne Universités - Université de Technologie de Compiègne CS 60319, 60203 Compiègne cedex Tel : +33(0)344234688 http://www.utc.fr/~mottelet _______________________________________________ dev mailing list dev@lists.scilab.org<mailto:dev@lists.scilab.org> http://lists.scilab.org/mailman/listinfo/dev
_______________________________________________ dev mailing list dev@lists.scilab.org http://lists.scilab.org/mailman/listinfo/dev
