Hi, Please first install prerequisites as it is mentioned here, https://developer.mozilla.org/en-US/docs/Mozilla/Developer_guide/Build_Instructions/Linux_Prerequisites.
After that follow the instructions for ubuntu 13.10, as both are nearly same, I do hope you can make it work then :) also make sure you have your mozconfig file written properly, I have had some problem while using a bash script to automate writing it, some letters from first line of mozconfig was not getting written, thus build errors, but I think your error has to do with some build prerequisites, I hope you can make it work then. But from my experience, 12.04 is the best Ubuntu for building b2g or you can try the 13.10. Regards, Towfique Anam Rine Mozillian Profile:https://mozillians.org/en-US/u/towfiqueanam/ Prezi:http://prezi.com/user/121n3 Twitter is @121n3 My WebLog:http://www.121n3.com > Date: Thu, 21 Aug 2014 09:37:20 -0700 > From: yan...@gmail.com > To: mozilla-dev-...@lists.mozilla.org > Subject: Re: [b2g] Can't build b2g successfully > > Hi, > > I was able to build B2G on ubuntu 12.04. However, following an upgrade to > ubunt14.04, I'm getting the same error as you. How did you solve this > problem? Thanks. > > Chunyan > > On Sunday, February 2, 2014 3:37:51 PM UTC, Cache Heigl wrote: > > Sorry. I already figured it out by connecting my phone. Then, I tried to > > > > install new version of Python, but got the following errors: > > > > > > > > checking for python2.7... (cached) /usr/bin/python2.7 > > > > Creating Python environment > > > > Python 2.7.3 or greater (but not Python 3) is required to build. You are > > > > running Python 2.7.1. > > > > Run |mach bootstrap| to ensure your system is up to date. > > > > > > > > If you still receive this error, your shell environment is likely detecting > > > > another Python version. Ensure a modern Python can be found in the paths > > > > defined by the $PATH environment variable and try again. > > > > ------ config.log ------ > > > > This file contains any messages produced by compilers while > > > > running configure, to aid debugging if configure makes a mistake. > > > > > > > > configure:1197: checking host system type > > > > configure:1218: checking target system type > > > > configure:1236: checking build system type > > > > configure:1311: checking for mawk > > > > configure:1397: checking for python2.7 > > > > *** Fix above errors and then restart with "make -f > > > > client.mkbuild" > > > > make[3]: *** [configure] Error 1 > > > > make[2]: *** [/Users/khu/Mozilla/B2G/objdir-gecko/config.status] Error 2 > > > > make[1]: *** [build] Error 2 > > > > make: *** [out/target/product/peak/obj/DATA/gecko_intermediates/gecko] > > > > Error 2 > > > > > > > > real 0m46.020s > > > > user 0m25.315s > > > > sys 0m13.497s > > > > > > > > > Build failed! < > > > > > > > > Build with |./build.sh -j1| for better messages > > > > If all else fails, use |rm -rf objdir-gecko| to clobber gecko and |rm -rf > > > > out| to clobber everything else. > > > > > > > > But, when I executed "python", I got: > > > > > > > > Python 2.7.6 (v2.7.6:3a1db0d2747e, Nov 10 2013, 00:42:54) > > > > [GCC 4.2.1 (Apple Inc. build 5666) (dot 3)] on darwin > > > > Type "help", "copyright", "credits" or "license" for more information. > > > > > > > > I will try to fix it. But, if anyone has some suggestions, it would be > > > > great. > > > > > > > > > > > > On Sun, Feb 2, 2014 at 7:13 PM, Cache Heigl <cache.he...@gmail.com> wrote: > > > > > > > > > Hi, > > > > > > > > > > I am new to Firefox OS. Recently, I am trying to build Firefox OS, but I > > > > > keep facing error messages. I had built it successfully before. Somehow, I > > > > > don't know why, I can't build it after couple days or weeks later. It > > > > > happens again and again. Did I miss anything? The error messages are: > > > > > > > > > > build/core/combo/HOST_darwin-x86.mk:42: > > > > > *********************************************************** > > > > > build/core/combo/HOST_darwin-x86.mk:43: * No 10.6 or 10.5 SDK found, do > > > > > you have Xcode installed? * > > > > > build/core/combo/HOST_darwin-x86.mk:44: > > > > > *********************************************************** > > > > > > > > > > build/core/combo/HOST_darwin-x86.mk:42: > > > > > *********************************************************** > > > > > build/core/combo/HOST_darwin-x86.mk:43: * No 10.6 or 10.5 SDK found, do > > > > > you have Xcode installed? * > > > > > build/core/combo/HOST_darwin-x86.mk:44: > > > > > *********************************************************** > > > > > build/core/combo/HOST_darwin-x86.mk:42: > > > > > *********************************************************** > > > > > build/core/combo/HOST_darwin-x86.mk:43: * No 10.6 or 10.5 SDK found, do > > > > > you have Xcode installed? * > > > > > build/core/combo/HOST_darwin-x86.mk:44: > > > > > *********************************************************** > > > > > build/core/combo/HOST_darwin-x86.mk:42: > > > > > *********************************************************** > > > > > build/core/combo/HOST_darwin-x86.mk:43: * No 10.6 or 10.5 SDK found, do > > > > > you have Xcode installed? * > > > > > build/core/combo/HOST_darwin-x86.mk:44: > > > > > *********************************************************** > > > > > build/core/combo/HOST_darwin-x86.mk:42: > > > > > *********************************************************** > > > > > build/core/combo/HOST_darwin-x86.mk:43: * No 10.6 or 10.5 SDK found, do > > > > > you have Xcode installed? * > > > > > build/core/combo/HOST_darwin-x86.mk:44: > > > > > *********************************************************** > > > > > build/core/combo/HOST_darwin-x86.mk:42: > > > > > *********************************************************** > > > > > build/core/combo/HOST_darwin-x86.mk:43: * No 10.6 or 10.5 SDK found, do > > > > > you have Xcode installed? * > > > > > build/core/combo/HOST_darwin-x86.mk:44: > > > > > *********************************************************** > > > > > build/core/combo/HOST_darwin-x86.mk:42: > > > > > *********************************************************** > > > > > build/core/combo/HOST_darwin-x86.mk:43: * No 10.6 or 10.5 SDK found, do > > > > > you have Xcode installed? * > > > > > build/core/combo/HOST_darwin-x86.mk:44: > > > > > *********************************************************** > > > > > ============================================ > > > > > PLATFORM_VERSION_CODENAME=AOSP > > > > > PLATFORM_VERSION=4.0.4.0.4.0.4 > > > > > TARGET_PRODUCT=full_peak > > > > > TARGET_BUILD_VARIANT=eng > > > > > TARGET_BUILD_TYPE=release > > > > > TARGET_BUILD_APPS= > > > > > TARGET_ARCH=arm > > > > > TARGET_ARCH_VARIANT=armv7-a-neon > > > > > HOST_ARCH=x86 > > > > > HOST_OS=darwin > > > > > HOST_OS_EXTRA=Darwin-11.4.2-x86_64-i386-64bit > > > > > HOST_BUILD_TYPE=release > > > > > BUILD_ID=OPENMASTER > > > > > OUT_DIR=out > > > > > ============================================ > > > > > > > > > > Blob setup script has changed, re-running > > > > > Pulling files from device > > > > > error: device not found > > > > > Found firmware with build ID > > > > > Backing up system partition to backup-peak > > > > > error: device not found > > > > > cp: ../../../backup-peak/system/etc/wifi/WCN*: No such file or directory > > > > > Pulling "libaudioeq.so" > > > > > error: device not found > > > > > Failed to pull libaudioeq.so. Giving up. > > > > > > > > > > > Build failed! < > > > > > > > > > > Build with |./build.sh -j1| for better messages > > > > > If all else fails, use |rm -rf objdir-gecko| to clobber gecko and |rm -rf > > > > > out| to clobber everything else. > > > > > > > > > > > > _______________________________________________ > dev-b2g mailing list > dev-b2g@lists.mozilla.org > https://lists.mozilla.org/listinfo/dev-b2g
_______________________________________________ dev-b2g mailing list dev-b2g@lists.mozilla.org https://lists.mozilla.org/listinfo/dev-b2g
