The branch main has been updated by mhorne: URL: https://cgit.FreeBSD.org/src/commit/?id=339ef8277350884079d7b8c46f21b5bdb63afac0
commit 339ef8277350884079d7b8c46f21b5bdb63afac0 Author: Mitchell Horne <[email protected]> AuthorDate: 2021-12-06 19:14:43 +0000 Commit: Mitchell Horne <[email protected]> CommitDate: 2021-12-06 19:15:30 +0000 Remove references to sio(4) from NOTES Also zs(4) and sab(4), which have similarly been removed. Reviewed by: imp, jhb, emaste MFC after: 3 days Differential Revision: https://reviews.freebsd.org/D33279 --- sys/conf/NOTES | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/sys/conf/NOTES b/sys/conf/NOTES index 89b3fe3bb500..bdc4896ecdf1 100644 --- a/sys/conf/NOTES +++ b/sys/conf/NOTES @@ -1711,8 +1711,7 @@ envvar hint.ata.1.port="0x170" envvar hint.ata.1.irq="15" # -# uart: newbusified driver for serial interfaces. It consolidates the sio(4), -# sab(4) and zs(4) drivers. +# uart: generic driver for serial interfaces. # device uart @@ -1735,15 +1734,14 @@ envvar hint.uart.0.port="0x3f8" envvar hint.uart.0.flags="0x10" envvar hint.uart.0.baud="115200" -# `flags' for serial drivers that support consoles like sio(4) and uart(4): +# `flags' for serial drivers that support consoles, like uart(4): # 0x10 enable console support for this unit. Other console flags # (if applicable) are ignored unless this is set. Enabling # console support does not make the unit the preferred console. -# Boot with -h or set boot_serial=YES in the loader. For sio(4) -# specifically, the 0x20 flag can also be set (see above). +# Boot with -h or set boot_serial=YES in the loader. # Currently, at most one unit can have console support; the # first one (in config file order) with this flag set is -# preferred. Setting this flag for sio0 gives the old behavior. +# preferred. # 0x80 use this port for serial line gdb support in ddb. Also known # as debug port. #
