The work done so far looks good to me.
On Tue, Mar 20, 2018 at 12:17 PM, Bruce Snyder <bruce.sny...@gmail.com> wrote: > I'm sorry I missed the previous WebEx discuss on this topic. I will do my > best to attend the next one. > > Bruce > > On Fri, Mar 16, 2018 at 3:52 AM, Martyn Taylor <mtay...@redhat.com> wrote: > >> Bruce, All >> >> We organised a webex discussion on the dev list[1] where we discussed >> Michael's proposal and created a bunch of JIRA[2] that we think are needed >> in order to move forward with the proposal. Unfortunately only a handful >> of people attended. There is concern that a lot of work will be put into >> building a new site based on Michael's proposal only for it to get -1 at >> the last minute. For this reason, can I suggest that people take some time >> to look into what has been done already by checking out the git repo as >> Bruce suggested, or we schedule another webex session where Michael can >> talk about his proposal. We can then take a vote as to whether or not this >> is an approach we want to move forward with and what the requirements are >> to go live. >> >> Thanks >> >> [1] http://activemq.2283324.n4.nabble.com/Website-Discussion- >> td4737173.html >> [2] https://issues.apache.org/jira/browse/AMQ-6912 >> >> >> >> On Fri, Mar 16, 2018 at 2:29 AM, Bruce Snyder <bruce.sny...@gmail.com> >> wrote: >> >> > Everyone should take a look at the gitbook that Mike put together. It's a >> > great first example. >> > >> > https://github.com/apache/activemq-web/pull/3 >> > >> > Please take 10 minutes to clone the repo, switch to the branch, install >> > gitbook, run gitbook and peruse the docs. >> > >> > Bruce >> > >> > On Wed, Feb 7, 2018 at 10:11 AM, Bruce Snyder <bruce.sny...@gmail.com> >> > wrote: >> > >> > > I'm sorry about the long delays in getting the official export from >> > > Confluence, but it took this long to get some resolution on the issue. >> > > >> > > I now have a full HTML export from Confluence with the exception of the >> > > Navigation page. You can grab the zip file of the HTML at the following >> > URL: >> > > >> > > https://drive.google.com/file/d/1qoTC9KMw8oIzGWwBW1X- >> > > oDtZxt8mFZlX/view?usp=sharing >> > > >> > > Bruce >> > > >> > > On Wed, Feb 7, 2018 at 10:06 AM, Bruce Snyder <bruce.sny...@gmail.com> >> > > wrote: >> > > >> > >> +1 >> > >> >> > >> Bruce >> > >> >> > >> On Sat, Feb 3, 2018 at 10:30 AM, Michael André Pearce < >> > >> michael.andre.pea...@me.com> wrote: >> > >> >> > >>> Hi All, >> > >>> >> > >>> It’s been a bit quiet on the front of this effort. >> > >>> >> > >>> I’d like to bump this a bit to get some feedback on the current >> > >>> examples, and try agree a plan going forwards and spread the work. >> > >>> >> > >>> I was speaking with Martyn the other week and we think maybe a brief >> > >>> webex to demo what’s been done so far and then discuss. >> > >>> Martyn’s offered he can host this using his bluejeans account >> (thanks) >> > >>> >> > >>> We are thinking of organising this for the week of 19th Feb. >> > >>> >> > >>> Any specific people who want to be involved can or cannot make? If >> not >> > >>> I’ll sync up with Martyn to agree and then post a time and date. >> > >>> >> > >>> Cheers >> > >>> Mike >> > >>> >> > >>> >> > >>> >> > >>> Sent from my iPhone >> > >>> >> > >>> > On 20 Dec 2017, at 01:26, Michael André Pearce < >> > >>> michael.andre.pea...@me.com> wrote: >> > >>> > >> > >>> > Just FYI have sent a PR with a link to my branch of this export now >> > in >> > >>> a GitBook form still needs a lot of TLC but have tried to get a large >> > bulk >> > >>> done. To provide some skeleton for 5.x documents. >> > >>> > >> > >>> > >> > >>> > Sent from my iPhone >> > >>> > >> > >>> >> On 18 Dec 2017, at 20:26, Michael André Pearce < >> > >>> michael.andre.pea...@me.com> wrote: >> > >>> >> >> > >>> >> Yeah, unfortunately the tool i found wanted just html it blew up >> > when >> > >>> trying to use modified. >> > >>> >> >> > >>> >> Like wise there was a couple of pages it couldn’t convert due to a >> > >>> css file on import issue but this wasn’t that many. >> > >>> >> >> > >>> >> Sent from my iPhone >> > >>> >> >> > >>> >>> On 18 Dec 2017, at 19:15, Bruce Snyder <bruce.sny...@gmail.com> >> > >>> wrote: >> > >>> >>> >> > >>> >>> Nice job, based on my spot check of a handful of files, it looks >> > much >> > >>> >>> better. But we will still need to manually fix all the valid >> > tables. >> > >>> >>> >> > >>> >>> Have you had a chance to look at the other branches that Dan Kulp >> > >>> provided? >> > >>> >>> >> > >>> >>> Bruce >> > >>> >>> >> > >>> >>> On Mon, Dec 18, 2017 at 10:59 AM, Michael André Pearce < >> > >>> >>> michael.andre.pea...@me.com> wrote: >> > >>> >>> >> > >>> >>>> I’ve had some luck auto generating MD files. >> > >>> >>>> >> > >>> >>>> Needs some cleanup which probably the worst can be bash >> scripted. >> > >>> >>>> >> > >>> >>>> Have sent a PR back to the activemq-web on github for others to >> > see. >> > >>> >>>> >> > >>> >>>> Mike >> > >>> >>>> >> > >>> >>>> Sent from my iPhone >> > >>> >>>> >> > >>> >>>>> On 14 Dec 2017, at 16:31, Bruce Snyder <bruce.sny...@gmail.com >> > >> > >>> wrote: >> > >>> >>>>> >> > >>> >>>>> Thanks, Dan. So far I only see the body.storage branch (the >> > others >> > >>> should >> > >>> >>>>> propagate in time). But I see that it's already more >> > comprehensive >> > >>> than >> > >>> >>>> the >> > >>> >>>>> HTML that I pushed because it contains all the directories. We >> > >>> should >> > >>> >>>>> probably wipe out the master branch and choose one of yours as >> > the >> > >>> new >> > >>> >>>>> master branch. >> > >>> >>>>> >> > >>> >>>>> Bruce >> > >>> >>>>> >> > >>> >>>>>> On Thu, Dec 14, 2017 at 7:56 AM, Daniel Kulp < >> dk...@apache.org> >> > >>> wrote: >> > >>> >>>>>> >> > >>> >>>>>> >> > >>> >>>>>> I hacked the Confluence exporter a bit to grab the page >> content >> > in >> > >>> >>>>>> different formats so we can see if one is easier to migrate or >> > >>> >>>> similar. I >> > >>> >>>>>> just pushed 3 new branches to this repo: >> > >>> >>>>>> >> > >>> >>>>>> body.only - this is basically the same HTML, but with all the >> > >>> “wrapper” >> > >>> >>>>>> stuff removed. Just the HTML of the body content. So no >> > >>> navigation >> > >>> >>>> or >> > >>> >>>>>> header/footer, etc… >> > >>> >>>>>> >> > >>> >>>>>> body.storage - this is the raw storage format of the data from >> > >>> >>>>>> confluence. Things like code snippets are in storage format >> > >>> >>>>>> (<structured-macro name=“code” …>), etc. >> > >>> >>>>>> >> > >>> >>>>>> body.view - confluence has a “body.view” mode that is between >> > the >> > >>> >>>>>> “storage” format and not really the exported HTML. The >> > >>> structured >> > >>> >>>>>> macros are expanded a bit (<script class=“brush: java”…), but >> > not >> > >>> >>>> really in >> > >>> >>>>>> final HTML form either. >> > >>> >>>>>> >> > >>> >>>>>> >> > >>> >>>>>> Anyway, if interested in converting content, one of the above >> > >>> might be a >> > >>> >>>>>> better starting point. >> > >>> >>>>>> >> > >>> >>>>>> >> > >>> >>>>>> Dan >> > >>> >>>>>> >> > >>> >>>>>> >> > >>> >>>>>> >> > >>> >>>>>> >> > >>> >>>>>> >> > >>> >>>>>> >> > >>> >>>>>>> On Dec 13, 2017, at 4:49 PM, Bruce Snyder < >> > >>> bruce.sny...@gmail.com> >> > >>> >>>>>> wrote: >> > >>> >>>>>>> >> > >>> >>>>>>> The HTML is available in the repo now. This HTML is just >> what I >> > >>> grabbed >> > >>> >>>>>>> from the public directory. Even if it's not comprehensive, >> it's >> > >>> good >> > >>> >>>>>> enough >> > >>> >>>>>>> for hacking around to figure out what we'd like to do. >> > >>> >>>>>>> >> > >>> >>>>>>> In the meantime, I'm still working with ASF Infra to figure >> out >> > >>> why the >> > >>> >>>>>>> Confluence export is failing. >> > >>> >>>>>>> >> > >>> >>>>>>> Bruce >> > >>> >>>>>>> >> > >>> >>>>>>> On Wed, Dec 13, 2017 at 12:51 PM, Bruce Snyder < >> > >>> bruce.sny...@gmail.com >> > >>> >>>>> >> > >>> >>>>>>> wrote: >> > >>> >>>>>>> >> > >>> >>>>>>>> Yep, that is correct, Dan: >> > >>> >>>>>>>> >> > >>> >>>>>>>> https://git-wip-us.apache.org/repos/asf/activemq-web.git >> > >>> >>>>>>>> >> > >>> >>>>>>>> I pushed my changes to the repo. Now they just need to >> > >>> propagate to >> > >>> >>>> the >> > >>> >>>>>>>> Github web UI. >> > >>> >>>>>>>> >> > >>> >>>>>>>> Bruce >> > >>> >>>>>>>> >> > >>> >>>>>>>>> On Wed, Dec 13, 2017 at 11:28 AM, Daniel Kulp < >> > >>> dk...@apache.org> >> > >>> >>>> wrote: >> > >>> >>>>>>>>> >> > >>> >>>>>>>>> >> > >>> >>>>>>>>> Isn’t the push address supposed to be: >> > >>> >>>>>>>>> >> > >>> >>>>>>>>> https://git-wip-us.apache.org/repos/asf/activemq-web.git >> > >>> >>>>>>>>> >> > >>> >>>>>>>>> >> > >>> >>>>>>>>> Dan >> > >>> >>>>>>>>> >> > >>> >>>>>>>>> >> > >>> >>>>>>>>> >> > >>> >>>>>>>>>> On Dec 13, 2017, at 1:15 PM, Bruce Snyder < >> > >>> bruce.sny...@gmail.com> >> > >>> >>>>>>>>> wrote: >> > >>> >>>>>>>>>> >> > >>> >>>>>>>>>> Thank you for the suggestion, but it looks like I do not >> > have >> > >>> >>>>>>>>> permissions >> > >>> >>>>>>>>>> either. I will contact ASF Infra for assistance. >> > >>> >>>>>>>>>> >> > >>> >>>>>>>>>> Bruce >> > >>> >>>>>>>>>> >> > >>> >>>>>>>>>> On Wed, Dec 13, 2017 at 2:41 AM, Martyn Taylor < >> > >>> mtay...@redhat.com> >> > >>> >>>>>>>>> wrote: >> > >>> >>>>>>>>>> >> > >>> >>>>>>>>>>> On Wed, Dec 13, 2017 at 4:00 AM, Bruce Snyder < >> > >>> >>>>>> bruce.sny...@gmail.com> >> > >>> >>>>>>>>>>> wrote: >> > >>> >>>>>>>>>>> >> > >>> >>>>>>>>>>>> I had the following empty git repo created to hold the >> > HTML >> > >>> from >> > >>> >>>> the >> > >>> >>>>>>>>>>>> current website: >> > >>> >>>>>>>>>>>> >> > >>> >>>>>>>>>>>> https://github.com/apache/activemq-web >> > >>> >>>>>>>>>>>> >> > >>> >>>>>>>>>>>> However, I have a conundrum -- content cannot be pushed >> > >>> directly >> > >>> >>>> to >> > >>> >>>>>> a >> > >>> >>>>>>>>>>>> Github ASF repo. Content can only be added via pull >> > request >> > >>> but >> > >>> >>>>>> Github >> > >>> >>>>>>>>>>> does >> > >>> >>>>>>>>>>>> not allow a pull request on an empty repo. >> > >>> >>>>>>>>>>>> >> > >>> >>>>>>>>>>> Bruce, have you tried pushing directly to the ASF repo. >> > i.e. >> > >>> >>>> git:// >> > >>> >>>>>>>>>>> git.apache.org/activemq-web.git >> > >>> >>>>>>>>>>> >> > >>> >>>>>>>>>>> This is the workflow we currently use, we push directly >> to >> > >>> the ASF >> > >>> >>>>>>>>> repo. >> > >>> >>>>>>>>>>> PRs are really only used for review and discussion. I >> > tried >> > >>> to >> > >>> >>>> push >> > >>> >>>>>>>>>>> directly this morning but looks like I don't have write >> > >>> >>>> permissions. >> > >>> >>>>>>>>>>> >> > >>> >>>>>>>>>>>> >> > >>> >>>>>>>>>>>> Any ideas on how to get the HTML into the repo? I guess >> I >> > >>> could >> > >>> >>>> ask >> > >>> >>>>>>>>> ASF >> > >>> >>>>>>>>>>>> Infra to push it. >> > >>> >>>>>>>>>>>> >> > >>> >>>>>>>>>>>> Bruce >> > >>> >>>>>>>>>>>> >> > >>> >>>>>>>>>>>> On Tue, Dec 12, 2017 at 8:17 PM, Bruce Snyder < >> > >>> >>>>>> bruce.sny...@gmail.com >> > >>> >>>>>>>>>> >> > >>> >>>>>>>>>>>> wrote: >> > >>> >>>>>>>>>>>> >> > >>> >>>>>>>>>>>>> I'm going to address all the questions to me in this >> > single >> > >>> >>>> reply. >> > >>> >>>>>>>>>>>>> >> > >>> >>>>>>>>>>>>> My original suggestion was that we export the HTML from >> > >>> >>>> Confluence, >> > >>> >>>>>>>>>>>>> convert to Markdown and put the Markdown and the images >> > in >> > >>> a git >> > >>> >>>>>>>>> repo. >> > >>> >>>>>>>>>>>>> Markdown is much easier to edit than raw HTML, >> especially >> > >>> the >> > >>> >>>> HTML >> > >>> >>>>>>>>>>>> exported >> > >>> >>>>>>>>>>>>> from Confluence (blech!). The idea was that we could >> use >> > >>> Jekyll + >> > >>> >>>>>>>>> SAAS >> > >>> >>>>>>>>>>> to >> > >>> >>>>>>>>>>>>> craft a new website. In fact, Michael Andre Pearce >> > >>> produced a >> > >>> >>>>>> mockup >> > >>> >>>>>>>>> of >> > >>> >>>>>>>>>>>>> this using the Apache Metro website as an example >> > (because >> > >>> it >> > >>> >>>>>> already >> > >>> >>>>>>>>>>>> makes >> > >>> >>>>>>>>>>>>> use of Jekyll + SAAS). It was enough to convince me >> that >> > we >> > >>> >>>> should >> > >>> >>>>>>>>> take >> > >>> >>>>>>>>>>>>> this path, so I started looking into doing a full, new >> > >>> export of >> > >>> >>>>>>>>>>>> Confluence >> > >>> >>>>>>>>>>>>> pages to HTML. If you have not seen Michael's mockup, >> you >> > >>> should >> > >>> >>>>>>>>> really >> > >>> >>>>>>>>>>>>> take a look. >> > >>> >>>>>>>>>>>>> >> > >>> >>>>>>>>>>>>> So, I manually grabbed the raw HTML that is >> automagically >> > >>> >>>> exported >> > >>> >>>>>>>>> from >> > >>> >>>>>>>>>>>>> Confluence and is hosting the current site that we see >> at >> > >>> >>>>>>>>>>>>> http://activemq.apache.org. I did some testing on it >> > using >> > >>> >>>>>> text2html >> > >>> >>>>>>>>>>> and >> > >>> >>>>>>>>>>>>> the conversion it does is pretty awful and would >> require >> > a >> > >>> lot of >> > >>> >>>>>>>>> hand >> > >>> >>>>>>>>>>>> work >> > >>> >>>>>>>>>>>>> to fix it. So, we discussed the point that there are >> > 1600+ >> > >>> pages >> > >>> >>>> of >> > >>> >>>>>>>>>>> HTML >> > >>> >>>>>>>>>>>> to >> > >>> >>>>>>>>>>>>> manually edit. But I later realized that it was only >> > about >> > >>> 950 >> > >>> >>>> HTML >> > >>> >>>>>>>>>>> pages >> > >>> >>>>>>>>>>>>> (from what I can tell so far). >> > >>> >>>>>>>>>>>>> >> > >>> >>>>>>>>>>>>> Then, Dan Kulp found a Confluence HTML to raw HTML >> > >>> converter >> > >>> >>>> built >> > >>> >>>>>> on >> > >>> >>>>>>>>>>> top >> > >>> >>>>>>>>>>>>> of PanDoc. So, I have also been trying to export the >> HTML >> > >>> from >> > >>> >>>>>>>>>>> Confluence >> > >>> >>>>>>>>>>>>> in order to try out the PanDoc converter (it works >> based >> > >>> on the >> > >>> >>>>>>>>>>>> Confluence >> > >>> >>>>>>>>>>>>> export function which is different from how the HTML is >> > >>> >>>>>> automagically >> > >>> >>>>>>>>>>>>> converted). Unfortunately, I am running into a >> > >>> >>>> NullPointerException >> > >>> >>>>>>>>>>> from >> > >>> >>>>>>>>>>>>> Confluence. ASF Infra is telling me that the NPE is due >> > to >> > >>> the >> > >>> >>>>>> CDATA >> > >>> >>>>>>>>> in >> > >>> >>>>>>>>>>>> the >> > >>> >>>>>>>>>>>>> search function on the Navigation page and is >> suggesting >> > >>> that the >> > >>> >>>>>>>>>>>> solution >> > >>> >>>>>>>>>>>>> is to remove the Navigation page. The problem with this >> > >>> >>>> suggestion >> > >>> >>>>>> is >> > >>> >>>>>>>>>>>> that >> > >>> >>>>>>>>>>>>> it would fundamentally remove all the navigation on the >> > >>> >>>> right-hand >> > >>> >>>>>>>>> side >> > >>> >>>>>>>>>>>> of >> > >>> >>>>>>>>>>>>> the site -- not what we want. >> > >>> >>>>>>>>>>>>> >> > >>> >>>>>>>>>>>>> I have also given some thought to the idea that >> removing >> > >>> the >> > >>> >>>>>> current >> > >>> >>>>>>>>>>> site >> > >>> >>>>>>>>>>>>> will break all links to old site. This is something >> that >> > >>> cannot >> > >>> >>>> be >> > >>> >>>>>>>>>>>>> overlooked and must be prevented as we do not want to >> > >>> leave users >> > >>> >>>>>> who >> > >>> >>>>>>>>>>>> have >> > >>> >>>>>>>>>>>>> bookmarked a page high and dry. This is a fairly easy >> > >>> problem to >> > >>> >>>>>>>>> solve >> > >>> >>>>>>>>>>>> this >> > >>> >>>>>>>>>>>>> using some mod_rewrite rules, the question is if ASF >> > Infra >> > >>> is >> > >>> >>>>>> willing >> > >>> >>>>>>>>>>> to >> > >>> >>>>>>>>>>>>> allow us to deploy such custom rules. This should be >> > >>> investigated >> > >>> >>>>>>>>> when >> > >>> >>>>>>>>>>> we >> > >>> >>>>>>>>>>>>> get to that point, but we are not there yet. First, we >> > >>> need to >> > >>> >>>>>> decide >> > >>> >>>>>>>>>>> the >> > >>> >>>>>>>>>>>>> best path forward based on what I have described above >> in >> > >>> the >> > >>> >>>>>>>>> preceding >> > >>> >>>>>>>>>>>>> paragraphs. >> > >>> >>>>>>>>>>>>> >> > >>> >>>>>>>>>>>>> >> > >>> >>>>>>>>>>>>> Bruce >> > >>> >>>>>>>>>>>>> >> > >>> >>>>>>>>>>>>> On Tue, Dec 12, 2017 at 11:39 AM, Martyn Taylor < >> > >>> >>>>>> mtay...@redhat.com> >> > >>> >>>>>>>>>>>>> wrote: >> > >>> >>>>>>>>>>>>> >> > >>> >>>>>>>>>>>>>> I was thinking there would be a single css file for >> all >> > >>> the >> > >>> >>>> pages. >> > >>> >>>>>>>>>>> But >> > >>> >>>>>>>>>>>> I >> > >>> >>>>>>>>>>>>>> haven't seen the files yet. Let's have a play around >> > when >> > >>> Bruce >> > >>> >>>>>>>>> pushes >> > >>> >>>>>>>>>>>> the >> > >>> >>>>>>>>>>>>>> export. >> > >>> >>>>>>>>>>>>>> >> > >>> >>>>>>>>>>>>>> Cheers >> > >>> >>>>>>>>>>>>>> >> > >>> >>>>>>>>>>>>>> On 12 Dec 2017 5:30 pm, "Michael André Pearce" < >> > >>> >>>>>>>>>>>>>> michael.andre.pea...@me.com> >> > >>> >>>>>>>>>>>>>> wrote: >> > >>> >>>>>>>>>>>>>> >> > >>> >>>>>>>>>>>>>>> What’s 1600 pages between friends.... >> > >>> >>>>>>>>>>>>>>> >> > >>> >>>>>>>>>>>>>>> I agree it will be easier to covert to md than to >> start >> > >>> doing >> > >>> >>>> css >> > >>> >>>>>>>>>>>>>> styles. >> > >>> >>>>>>>>>>>>>>> It’s all from a wiki anyhow so it’s can’t be that far >> > >>> off. >> > >>> >>>>>>>>>>>>>>> >> > >>> >>>>>>>>>>>>>>> It be good to get some samples (eg 50 pages) if not >> all >> > >>> just to >> > >>> >>>>>> try >> > >>> >>>>>>>>>>>> and >> > >>> >>>>>>>>>>>>>>> see what it is like. >> > >>> >>>>>>>>>>>>>>> >> > >>> >>>>>>>>>>>>>>> >> > >>> >>>>>>>>>>>>>>> >> > >>> >>>>>>>>>>>>>>> On 12 Dec 2017, at 17:04, Clebert Suconic < >> > >>> >>>>>>>>>>> clebert.suco...@gmail.com> >> > >>> >>>>>>>>>>>>>>> wrote: >> > >>> >>>>>>>>>>>>>>> >> > >>> >>>>>>>>>>>>>>>>> Exporting to MD and creating a gitbook seems like a >> > big >> > >>> >>>> task, I >> > >>> >>>>>>>>>>>>>> suspect >> > >>> >>>>>>>>>>>>>>> any >> > >>> >>>>>>>>>>>>>>>>> tool we use will cause a bunch of styling/content >> > >>> issues. >> > >>> >>>>>>>>>>>>>>>>> >> > >>> >>>>>>>>>>>>>>>>> At least initially, how about we just create a nice >> > >>> landing >> > >>> >>>>>> page >> > >>> >>>>>>>>>>>> that >> > >>> >>>>>>>>>>>>>>>>> brings the ActiveMQ site and Artemis site together, >> > and >> > >>> >>>>>>>>>>>> refresh/align >> > >>> >>>>>>>>>>>>>>> the >> > >>> >>>>>>>>>>>>>>>>> existing content with some CSS? >> > >>> >>>>>>>>>>>>>>>> >> > >>> >>>>>>>>>>>>>>>> I was just looking for the minimal effort task. I >> > >>> thought that >> > >>> >>>>>>>>>>>>>>>> converting these pages into a doc would be easier >> than >> > >>> >>>>>> converting >> > >>> >>>>>>>>>>>> them >> > >>> >>>>>>>>>>>>>>>> to another .css... >> > >>> >>>>>>>>>>>>>>>> >> > >>> >>>>>>>>>>>>>>>> if the conversion needed to be done anyways... I >> > >>> thought .md >> > >>> >>>>>> would >> > >>> >>>>>>>>>>>> be >> > >>> >>>>>>>>>>>>>>>> easier and having a better final presentation. >> > >>> >>>>>>>>>>>>>>> >> > >>> >>>>>>>>>>>>>> >> > >>> >>>>>>>>>>>>> >> > >>> >>>>>>>>>>>>> >> > >>> >>>>>>>>>>>>> >> > >>> >>>>>>>>>>>>> -- >> > >>> >>>>>>>>>>>>> perl -e 'print unpack("u30","D0G)U8V4\@4VYY9& >> > >>> >>>>>>>>>>>>> 5R\"F)R=6-E+G-N>61E<D\!G;6%I;\"YC;VT*" );' >> > >>> >>>>>>>>>>>>> >> > >>> >>>>>>>>>>>>> ActiveMQ in Action: http://bit.ly/2je6cQ >> > >>> >>>>>>>>>>>>> Blog: http://bsnyder.org/ <http://bruceblog.org/> >> > >>> >>>>>>>>>>>>> Twitter: http://twitter.com/brucesnyder >> > >>> >>>>>>>>>>>>> >> > >>> >>>>>>>>>>>> >> > >>> >>>>>>>>>>>> >> > >>> >>>>>>>>>>>> >> > >>> >>>>>>>>>>>> -- >> > >>> >>>>>>>>>>>> perl -e 'print >> > >>> >>>>>>>>>>>> unpack("u30","D0G)U8V4\@4VYY9& >> > >>> 5R\"F)R=6-E+G-N>61E<D\!G;6%I;\ >> > >>> >>>>>> "YC;VT*" >> > >>> >>>>>>>>> );' >> > >>> >>>>>>>>>>>> >> > >>> >>>>>>>>>>>> ActiveMQ in Action: http://bit.ly/2je6cQ >> > >>> >>>>>>>>>>>> Blog: http://bsnyder.org/ <http://bruceblog.org/> >> > >>> >>>>>>>>>>>> Twitter: http://twitter.com/brucesnyder >> > >>> >>>>>>>>>>>> >> > >>> >>>>>>>>>>> >> > >>> >>>>>>>>>> >> > >>> >>>>>>>>>> >> > >>> >>>>>>>>>> >> > >>> >>>>>>>>>> -- >> > >>> >>>>>>>>>> perl -e 'print >> > >>> >>>>>>>>>> unpack("u30","D0G)U8V4\@4VYY9& >> > 5R\"F)R=6-E+G-N>61E<D\!G;6%I;\ >> > >>> >>>> "YC;VT*" >> > >>> >>>>>>>>> );' >> > >>> >>>>>>>>>> >> > >>> >>>>>>>>>> ActiveMQ in Action: http://bit.ly/2je6cQ >> > >>> >>>>>>>>>> Blog: http://bsnyder.org/ <http://bruceblog.org/> >> > >>> >>>>>>>>>> Twitter: http://twitter.com/brucesnyder >> > >>> >>>>>>>>> >> > >>> >>>>>>>>> -- >> > >>> >>>>>>>>> Daniel Kulp >> > >>> >>>>>>>>> dk...@apache.org - http://dankulp.com/blog >> > >>> >>>>>>>>> Talend Community Coder - http://coders.talend.com >> > >>> >>>>>>>>> >> > >>> >>>>>>>>> >> > >>> >>>>>>>> >> > >>> >>>>>>>> >> > >>> >>>>>>>> -- >> > >>> >>>>>>>> perl -e 'print unpack("u30","D0G)U8V4\@4VYY9& >> > >>> >>>>>>>> 5R\"F)R=6-E+G-N>61E<D\!G;6%I;\"YC;VT*" );' >> > >>> >>>>>>>> >> > >>> >>>>>>>> ActiveMQ in Action: http://bit.ly/2je6cQ >> > >>> >>>>>>>> Blog: http://bsnyder.org/ <http://bruceblog.org/> >> > >>> >>>>>>>> Twitter: http://twitter.com/brucesnyder >> > >>> >>>>>>>> >> > >>> >>>>>>> >> > >>> >>>>>>> >> > >>> >>>>>>> >> > >>> >>>>>>> -- >> > >>> >>>>>>> perl -e 'print >> > >>> >>>>>>> unpack("u30","D0G)U8V4\@4VYY9&5R\"F)R=6-E+G-N>61E<D\!G;6%I;\ >> > >>> "YC;VT*" >> > >>> >>>> );' >> > >>> >>>>>>> >> > >>> >>>>>>> ActiveMQ in Action: http://bit.ly/2je6cQ >> > >>> >>>>>>> Blog: http://bsnyder.org/ <http://bruceblog.org/> >> > >>> >>>>>>> Twitter: http://twitter.com/brucesnyder >> > >>> >>>>>> >> > >>> >>>>>> -- >> > >>> >>>>>> Daniel Kulp >> > >>> >>>>>> dk...@apache.org - http://dankulp.com/blog >> > >>> >>>>>> Talend Community Coder - http://coders.talend.com >> > >>> >>>>>> >> > >>> >>>>>> >> > >>> >>>>> >> > >>> >>>>> >> > >>> >>>>> -- >> > >>> >>>>> perl -e 'print >> > >>> >>>>> unpack("u30","D0G)U8V4\@4VYY9&5R\"F)R=6-E+G-N>61E<D\!G;6%I;\ >> > "YC;VT*" >> > >>> );' >> > >>> >>>>> >> > >>> >>>>> ActiveMQ in Action: http://bit.ly/2je6cQ >> > >>> >>>>> Blog: http://bsnyder.org/ <http://bruceblog.org/> >> > >>> >>>>> Twitter: http://twitter.com/brucesnyder >> > >>> >>>> >> > >>> >>> >> > >>> >>> >> > >>> >>> >> > >>> >>> -- >> > >>> >>> perl -e 'print >> > >>> >>> unpack("u30","D0G)U8V4\@4VYY9&5R\"F)R=6-E+G-N>61E<D\!G;6%I;\ >> > "YC;VT*" >> > >>> );' >> > >>> >>> >> > >>> >>> ActiveMQ in Action: http://bit.ly/2je6cQ >> > >>> >>> Blog: http://bsnyder.org/ <http://bruceblog.org/> >> > >>> >>> Twitter: http://twitter.com/brucesnyder >> > >>> >> > >> >> > >> >> > >> >> > >> -- >> > >> perl -e 'print unpack("u30","D0G)U8V4\@4VYY9& >> > >> 5R\"F)R=6-E+G-N>61E<D\!G;6%I;\"YC;VT*" );' >> > >> >> > >> ActiveMQ in Action: http://bit.ly/2je6cQ >> > >> Blog: http://bsnyder.org/ <http://bruceblog.org/> >> > >> Twitter: http://twitter.com/brucesnyder >> > >> >> > > >> > > >> > > >> > > -- >> > > perl -e 'print unpack("u30","D0G)U8V4\@4VYY9& >> > > 5R\"F)R=6-E+G-N>61E<D\!G;6%I;\"YC;VT*" );' >> > > >> > > ActiveMQ in Action: http://bit.ly/2je6cQ >> > > Blog: http://bsnyder.org/ <http://bruceblog.org/> >> > > Twitter: http://twitter.com/brucesnyder >> > > >> > >> > >> > >> > -- >> > perl -e 'print >> > unpack("u30","D0G)U8V4\@4VYY9&5R\"F)R=6-E+G-N>61E<D\!G;6%I;\"YC;VT*" );' >> > >> > ActiveMQ in Action: http://bit.ly/2je6cQ >> > Blog: http://bsnyder.org/ <http://bruceblog.org/> >> > Twitter: http://twitter.com/brucesnyder >> > >> > > > > -- > perl -e 'print > unpack("u30","D0G)U8V4\@4VYY9&5R\"F)R=6-E+G-N>61E<D\!G;6%I;\"YC;VT*" );' > > ActiveMQ in Action: http://bit.ly/2je6cQ > Blog: http://bsnyder.org/ <http://bruceblog.org/> > Twitter: http://twitter.com/brucesnyder
