Chinmay, Yes, that's the idea.
Thomas On Mon, Dec 28, 2015 at 9:54 PM, Chinmay Kolhatkar <[email protected]> wrote: > Hi Thomas, > > If I understand correctly, we want to provide a feature to the operator > similar to beginWindow and endWindow callback (as Sandeep said startBatch & > endBatch), but at the mercy of user code. > So user code will define when startBatch & endBatch should get called. > > Is my understanding correct? > > Thanks, > Chinmay. > > > ~ Chinmay. > > On Mon, Dec 28, 2015 at 8:31 PM, Sandeep Deshmukh <[email protected] > > > wrote: > > > +1 for batch support in Apex. I would be interested to be part of this > > work. > > > > I would like to start with basics and would like to know how one will > > define "batch" in Apex context. Which of the following cases would be > > supported under batch: > > > > 1. A program completes a task and auto shutdown itself once the task > is > > complete. E.g. the program needs to copy a set of files from source > to > > destination. > > 2. A program completes a task and then waits for pre-defined time to > > poll for something more to work on. E.g. the program copies all the > > files > > from source location and then periodically checks, say every 1 hour, > if > > there are new files at the source and copies them. > > 3. A program completes a task and then polls every 1 hr as in case 2 > but > > releases resources during wait time. > > > > Needs for each of the above will vary. I am putting down some basic > > requirements for each of them > > > > 1. This case will need a mechanism to shutdown automatically on > completion > > of the task. > > > > StartProgram() > > StartBatch() > > Streaming Application starts, runs and finishes > > EndBatch() > > EndProgram() > > > > 2. This will simply need a construct to wait for some time ( say 10 > > minutes) or till some time ( till 1pm) . > > > > StartProgram() > > while(true) > > { > > StartBatch() > > Streaming Application starts, runs and finishes > > EndBatch() > > WaitTill(time) or WaitFor(timeperiod) > > } > > EndProgram() > > > > 3. Apart from wait construct, we also need release resources support > > > > StartProgram() > > while(true) > > { > > RestartFromSavedState() // if any state is saved previously. > > StartBatch() > > Streaming Application starts, runs and finishes > > EndBatch() > > SaveState() > > RelaseResources() > > WaitTill(time) or WaitFor(timeperiod) > > } > > EndProgram() > > > > > > All the constructs : waitTime(), RestartFromSavedState(), SaveState() > > , RelaseResources() > > could be very well be part of StartBatch() or EndBatch(). I have put them > > separately for clear understanding only. > > > > Another point to think on would be scheduler. A batch job is generally > > triggered as a cron job. Do we still see Apex jobs being triggered by > cron > > or would like to include a scheduler within Apex that will trigger jobs > > based on time or on some external trigger or even polling for events. > > > > Regards > > Sandeep > > > > On Mon, Dec 28, 2015 at 5:11 PM, Bhupesh Chawda <[email protected] > > > > wrote: > > > > > +1 > > > > > > I think in the batch case, application windows may be transparent to > the > > > user application / operator logic. A batch can be thought of as one > > > instantiation of a Apex Dag, from setup() to teardown() for all > > operators. > > > May be we need to define a higher level API which encapsulates a > > streaming > > > application. > > > Something like: > > > > > > StartBatch() > > > Streaming Application starts, runs and finishes > > > EndBatch() > > > > > > The streaming application will run transparently with all the > windowing / > > > checkpointing logic that it currently does. Checkpointing large amounts > > of > > > data may be avoided by either checkpointing at large intervals or even > > > disabling checkpointing for the batch job. > > > Additionally, the external trigger (existence of some file etc. ) can > be > > > controlled by the StartBatch() and EndBatch() calls. In all the batch > use > > > cases, it is usually the case that once the input is processed > > completely, > > > the batch is done. Example: In map reduce all splits processed means > > batch > > > job is done. Similar primitives can be supported by Apex in order to > > > facilitate the control management in the StartBatch() and EndBatch() > > > methods. > > > > > > -Bhupesh > > > > > > On Mon, Dec 28, 2015 at 1:34 PM, Thomas Weise <[email protected]> > > > wrote: > > > > > > > Following JIRA is open to enhance the support for batch: > > > > > > > > https://issues.apache.org/jira/browse/APEXCORE-235 > > > > > > > > One of the challenges with batch on Apex today is that there isn't > any > > > > native support to identify begin/end of batch and associate actions > to > > > it. > > > > For example, at the beginning we may want to fetch some data needed > for > > > all > > > > subsequent processing and at the end perform some finalization action > > or > > > > push to external system (add partition to Hive table or similar). > > > > > > > > Absent native support, the workaround is to add a bunch of ports and > > > extra > > > > operators for propagation and synchronization purposes, which makes > > > > building the batch application with standard operators or development > > of > > > > custom operators rather difficult and inefficient. > > > > > > > > The span of a batch can also be seen as a user defined window, with > > logic > > > > for begin and end. The current "application window" support is > limited > > > to a > > > > multiple of streaming window on a per operator basis. In the batch > > case, > > > > the boundary needs to be more flexible - user code needs to be able > to > > > > determine begin/endWindow based on external data (existence of files > > > etc.). > > > > > > > > There is another commonality with application window, and that's > > > alignment > > > > of checkpointing. For batches where it is more efficient to redo the > > > > processing instead of checkpointing potentially large amounts of > > > > intermediate state for incremental recovery, it would be nice to be > > able > > > to > > > > say "user window == checkpoint interval". > > > > > > > > This is to float the idea of having a window control that can be > > > influenced > > > > by user code. An operator that identifies the batch boundary tells > the > > > > engine about it and corresponding control tuples are submitted > through > > > the > > > > stream, leading to callbacks on downstream operators. These control > > > > tuples should > > > > be able to carry contextual information that can be used in > downstream > > > > operator logic (file names, schema information etc.) > > > > > > > > I don't expect the current beginWindow/endWindow can be augmented in > a > > > > backward compatible way to accommodate this, but a similar optional > > > > interface could be supported to enable batch aware operators and > > > > checkpointing optimization. > > > > > > > > Thoughts? > > > > > > > > > >
