Here is my current work in progress.
It's essentially finished, but I haven't had time to write a changelog yet,
and must now leave my computer for a few hours, so I'm posting it here in
case anyone wants to comment on it.
I'll be back to resume work on it later tonight.
Max.
Index: .cvsignore
===================================================================
RCS file: /home/mirror/cvsmirror/misc-cvs/apr/.cvsignore,v
retrieving revision 1.24
diff -u -p -r1.24 .cvsignore
--- .cvsignore 9 Jul 2004 15:51:58 -0000 1.24
+++ .cvsignore 15 Jul 2004 11:54:04 -0000
@@ -6,6 +6,7 @@ config.status
configure
libtool
apr-config
+apr-*-config
apr-config.out
LibD
LibR
Index: Makefile.in
===================================================================
RCS file: /home/mirror/cvsmirror/misc-cvs/apr/Makefile.in,v
retrieving revision 1.106
diff -u -p -r1.106 Makefile.in
--- Makefile.in 1 Jul 2004 14:34:48 -0000 1.106
+++ Makefile.in 15 Jul 2004 11:50:27 -0000
@@ -44,7 +44,7 @@ CLEAN_TARGETS = apr-config.out apr.exp e
build/apr_rules.out
DISTCLEAN_TARGETS = config.cache config.log config.status \
include/apr.h include/arch/unix/apr_private.h \
- libtool apr-config build/apr_rules.mk apr.pc
+ libtool $(APR_CONFIG) build/apr_rules.mk apr.pc
EXTRACLEAN_TARGETS = configure aclocal.m4 include/arch/unix/apr_private.h.in \
build-outputs.mk build/ltcf-c.sh build/ltmain.sh build/libtool.m4
@@ -56,8 +56,8 @@ [EMAIL PROTECTED]@
[EMAIL PROTECTED]@
# Create apr-config script suitable for the install tree
-apr-config.out: apr-config
- sed 's,^\(location=\).*$$,\1installed,' < apr-config > $@
+apr-config.out: $(APR_CONFIG)
+ sed 's,^\(location=\).*$$,\1installed,' < $(APR_CONFIG) > $@
# Create apr_rules.mk suitable for the install tree
build/apr_rules.out: build/apr_rules.mk
@@ -97,9 +97,8 @@ install: $(TARGET_LIB) apr-config.out bu
if [ ! -d $(DESTDIR)$(bindir) ]; then \
$(top_srcdir)/build/mkdir.sh $(DESTDIR)$(bindir); \
fi;
- $(LIBTOOL) --mode=install cp apr-config.out
$(DESTDIR)$(bindir)/apr-config
$(LIBTOOL) --mode=install cp apr-config.out
$(DESTDIR)$(bindir)/$(APR_CONFIG)
- chmod 755 $(DESTDIR)$(bindir)/apr-config
$(DESTDIR)$(bindir)/$(APR_CONFIG)
+ chmod 755 $(DESTDIR)$(bindir)/$(APR_CONFIG)
@if [ $(INSTALL_SUBDIRS) != "none" ]; then \
for i in $(INSTALL_SUBDIRS); do \
( cd $$i ; $(MAKE) DESTDIR=$(DESTDIR) install ); \
Index: apr-config.in
===================================================================
RCS file: /home/mirror/cvsmirror/misc-cvs/apr/apr-config.in,v
retrieving revision 1.38
diff -u -p -r1.38 apr-config.in
--- apr-config.in 28 Feb 2004 18:31:41 -0000 1.38
+++ apr-config.in 15 Jul 2004 11:50:27 -0000
@@ -49,7 +49,7 @@ [EMAIL PROTECTED]@
show_usage()
{
cat << EOF
-Usage: apr-config [OPTION]
+Usage: [EMAIL PROTECTED]@-config [OPTION]
Known values for OPTION are:
--prefix[=DIR] change prefix to DIR
@@ -75,9 +75,9 @@ Known values for OPTION are:
--help print this help
When linking with libtool, an application should do something like:
- APR_LIBS="\`apr-config --link-libtool --libs\`"
+ APR_LIBS="[EMAIL PROTECTED]@-config --link-libtool --libs\`"
or when linking directly:
- APR_LIBS="\`apr-config --link-ld --libs\`"
+ APR_LIBS="[EMAIL PROTECTED]@-config --link-ld --libs\`"
An application should use the results of --cflags, --cppflags, --includes,
and --ldflags in their build process.
Index: configure.in
===================================================================
RCS file: /home/mirror/cvsmirror/misc-cvs/apr/configure.in,v
retrieving revision 1.596
diff -u -p -r1.596 configure.in
--- configure.in 8 Jul 2004 23:18:52 -0000 1.596
+++ configure.in 15 Jul 2004 11:50:51 -0000
@@ -2016,7 +2016,7 @@ AC_OUTPUT([
$MAKEFILES
include/apr.h
build/apr_rules.mk
- apr-config
+ apr-$APR_MAJOR_VERSION-config:apr-config.in
apr.pc
],[
for i in $SAVE_FILES; do
@@ -2026,5 +2026,7 @@ for i in $SAVE_FILES; do
fi
rm -f $i.save
done
-chmod +x apr-config
+chmod +x apr-$APR_MAJOR_VERSION-config
+],[
+APR_MAJOR_VERSION=$APR_MAJOR_VERSION
])
Index: build/find_apr.m4
===================================================================
RCS file: /home/mirror/cvsmirror/misc-cvs/apr/build/find_apr.m4,v
retrieving revision 1.14
diff -u -p -r1.14 find_apr.m4
--- build/find_apr.m4 5 Nov 2002 22:09:19 -0000 1.14
+++ build/find_apr.m4 15 Jul 2004 17:25:57 -0000
@@ -6,12 +6,12 @@ dnl library. It provides a standardized
dnl embedding APR into the application source, or locating an installed
dnl copy of APR.
dnl
-dnl APR_FIND_APR([srcdir [, builddir, implicit-install-check]])
+dnl APR_FIND_APR(srcdir, builddir, implicit-install-check, acceptable-majors)
dnl
dnl where srcdir is the location of the bundled APR source directory, or
dnl empty if source is not bundled.
dnl
-dnl where blddir is the location where the bundled APR will will be built,
+dnl where builddir is the location where the bundled APR will will be built,
dnl or empty if the build will occur in the srcdir.
dnl
dnl where implicit-install-check set to 1 indicates if there is no
@@ -28,6 +28,18 @@ dnl
dnl Note: this macro file assumes that apr-config has been installed; it
dnl is normally considered a required part of an APR installation.
dnl
+dnl Errorious: We can never find a source dir, except a bundled one,
+dnl and this is ok
+dnl Note: At this time, we cannot find *both* a source dir and a build dir.
+dnl If both are available, the build directory should be passed to
+dnl the --with-apr switch.
+dnl
+dnl Errorious: What is this talking about????
+dnl Note: The installation layout is presumed to follow the standard
+dnl PREFIX/lib and PREFIX/include pattern. If the APR config file
+dnl is available (and can be found), then non-standard layouts are
+dnl possible, since it will be described in the config file.
+dnl
dnl If a bundled source directory is available and needs to be (re)configured,
dnl then apr_found is set to "reconfig". The caller should reconfigure the
dnl (passed-in) source directory, placing the result in the build directory,
@@ -47,58 +59,96 @@ AC_DEFUN(APR_FIND_APR, [
TEST_X="test -x"
fi
+ if test -z "$4"; then
+ AC_MSG_ERROR([the APR_FI@&[EMAIL PROTECTED] macro requires an
acceptable-majors parameter])
+ fi
+ apr_temp_acceptable_apr_config=""
+ for apr_temp_major in $4
+ do
+ case $apr_temp_major in
+ 0)
+ apr_temp_acceptable_apr_config="$apr_temp_acceptable_apr_config
apr-config"
+ ;;
+ *)
+ apr_temp_acceptable_apr_config="$apr_temp_acceptable_apr_config
apr-$apr_temp_major-config"
+ ;;
+ esac
+ done
+
AC_MSG_CHECKING(for APR)
AC_ARG_WITH(apr,
- [ --with-apr=DIR|FILE prefix for installed APR, path to APR build tree,
+ [ --with-apr=PATH prefix for installed APR, path to APR build tree,
or the full path to apr-config],
[
if test "$withval" = "no" || test "$withval" = "yes"; then
- AC_MSG_ERROR([--with-apr requires a directory to be provided])
+ AC_MSG_ERROR([--with-apr requires a directory or file to be provided])
fi
- if $TEST_X "$withval/bin/apr-config"; then
- apr_found="yes"
- apr_config="$withval/bin/apr-config"
- elif $TEST_X "$withval/apr-config"; then
- apr_found="yes"
- apr_config="$withval/apr-config"
- elif $TEST_X "$withval" && $withval --help > /dev/null 2>&1 ; then
+ for apr_temp_apr_config_file in $apr_temp_acceptable_apr_config
+ do
+ for lookdir in "$withval/bin" "$withval"
+ do
+ if $TEST_X "$lookdir/$apr_temp_apr_config_file"; then
+ apr_found="yes"
+ apr_config="$lookdir/$apr_temp_apr_config_file"
+ break 2
+ fi
+ done
+ done
+
+ if test "$apr_found" != "yes" && $TEST_X "$withval" && $withval --help >
/dev/null 2>&1 ; then
apr_found="yes"
apr_config="$withval"
fi
- dnl if --with-apr is used, then the target prefix/directory must be valid
+ dnl if --with-apr is used, it is a fatal error for its argument
+ dnl to be invalid
if test "$apr_found" != "yes"; then
- AC_MSG_ERROR([the --with-apr parameter is incorrect. It must specify an
install prefix, a
-build directory, or an apr-config file.])
+ AC_MSG_ERROR([the --with-apr parameter is incorrect. It must specify an
install prefix, a build directory, or an apr-config file.])
fi
],[
dnl if we have a bundled source directory, use it
if test -d "$1"; then
apr_temp_abs_srcdir="`cd $1 && pwd`"
apr_found="reconfig"
+ apr_bundled_major="`sed -n
'/#define.*APR_MAJOR_VERSION/s/^[[^0-9]]*\([[0-9]]*\).*$/\1/p'
\"$1/include/apr_version.h\"`"
+ case $apr_bundled_major in
+ "")
+ AC_MSG_ERROR([failed to find major version of bundled APR])
+ ;;
+ 0)
+ apr_temp_apr_config_file="apr-config"
+ ;;
+ *)
+ apr_temp_apr_config_file="apr-$apr_bundled_major-config"
+ ;;
+ esac
if test -n "$2"; then
- apr_config="$2/apr-config"
+ apr_config="$2/$apr_temp_apr_config_file"
else
- apr_config="$1/apr-config"
+ apr_config="$1/$apr_temp_apr_config_file"
fi
fi
if test "$apr_found" = "no" && test -n "$3" && test "$3" = "1"; then
- if apr-config --help > /dev/null 2>&1 ; then
- apr_found="yes"
- apr_config="apr-config"
- else
- dnl look in some standard places (apparently not in builtin/default)
- for lookdir in /usr /usr/local /opt/apr /usr/local/apache2 ; do
- if $TEST_X "$lookdir/bin/apr-config"; then
- apr_found="yes"
- apr_config="$lookdir/bin/apr-config"
- break
- fi
- done
- fi
+ for apr_temp_apr_config_file in $apr_temp_acceptable_apr_config
+ do
+ if $apr_temp_apr_config_file --help > /dev/null 2>&1 ; then
+ apr_found="yes"
+ apr_config="apr-config"
+ break
+ else
+ dnl look in some standard places (apparently not in builtin/default)
+ for lookdir in /usr /usr/local /opt/apr /usr/local/apache2 ; do
+ if $TEST_X "$lookdir/bin/$apr_temp_apr_config_file"; then
+ apr_found="yes"
+ apr_config="$lookdir/bin/$apr_temp_apr_config_file"
+ break 2
+ fi
+ done
+ fi
+ done
fi
])
- AC_MSG_RESULT($apr_found)
+ AC_MSG_RESULT($apr_found $apr_config)
])
