Hi Bob, great that state diagram is within reach. I played a little with it (see attached diagram) and run into problems:
- The handles for the arrows don't work (but menu bar works). - Saving fails, diagram is empty after loading again. See below what the error dialog (when saving) says. I don't know if saving was supposed to work at that early stage, just ignore my report if it's too early. Thomas dialog.repairAn inconsistency has been detected when saving the model.These have been repaired and are reported below. The save will continue with the model having been amended as described. org.argouml.uml.diagram.state.ui.FigSimpleState "initializing" -- Removed: model element no longer in the repository org.argouml.uml.diagram.state.ui.FigInitialState "" -- Removed: model element no longer in the repository org.argouml.uml.diagram.state.ui.FigSimpleState "active" -- Removed: model element no longer in the repository org.argouml.uml.diagram.state.ui.FigFinalState "" -- Removed: model element no longer in the repository org.argouml.uml.diagram.state.ui.FigInitialState "" -- Removed: model element no longer in the repository org.argouml.uml.diagram.state.ui.FigSimpleState "mode1" -- Removed: model element no longer in the repository org.argouml.uml.diagram.state.ui.FigSimpleState "mode2" -- Removed: model element no longer in the repository org.argouml.uml.diagram.state.ui.FigFinalState "" -- Removed: model element no longer in the repository -------- Original-Nachricht -------- > Datum: Mon, 9 May 2011 12:44:30 +0100 > Von: Bob Tarling <[email protected]> > An: [email protected] > Betreff: Re: [argouml-dev] State diagram working in UML2 mode > Yes, it is my intention that the user can drop a state within another > (non-composite) state and then the containing state automatically has > a region added and becomes composite. > > The other things currently missing in the state diagram for UML2 is > the concept of a statemachine having a region. The states cannot be > placed directly in the sattemachine but should be placed in the region > that is owned by the statemachine. > > If you look at the current implementation in UML2 mode I think that is > why states are not appearing in the XMI even though they are drawing > on the diagram. > > Aside from this and the composite state issue I think state diagrams > for UML2 are pretty much complete. > > Regards > > Bob. > > On 9 May 2011 12:36, Michiel van der Wulp <[email protected]> > wrote: > > On 09-05-11 12:58, Bob Tarling wrote: > >> In UML2 there is only a State metaclass for both simple state and > >> composite state. That state has a boolean isComposite ... > >> FigVertex will alter its behaviour depending on the value of > >> isComposite so that it can act like either of our current > >> FigSimpleState and FigCompositeState classes. > > Hi Bob, > > Great! > > Can we (later) add the functionality that you drop a state on a UML2 > > state with isComposite=false and have the isComposite turn to true > > automatically? > > I hope your architecture will allow that. > > > > For the end-user there will be no difference any more between simple and > > composite states. Ha, this is actually a good improvement in UML2 :-). > > > > Michiel > > > > ------------------------------------------------------ > > > http://argouml.tigris.org/ds/viewMessage.do?dsForumId=450&dsMessageId=2733018 > > > > To unsubscribe from this discussion, e-mail: > [[email protected]]. > > To be allowed to post to the list contact the mailing list moderator, > email: [[email protected]] > > > > ------------------------------------------------------ > http://argouml.tigris.org/ds/viewMessage.do?dsForumId=450&dsMessageId=2733029 > > To unsubscribe from this discussion, e-mail: > [[email protected]]. > To be allowed to post to the list contact the mailing list moderator, > email: [[email protected]] -- Empfehlen Sie GMX DSL Ihren Freunden und Bekannten und wir belohnen Sie mit bis zu 50,- Euro! https://freundschaftswerbung.gmx.de ------------------------------------------------------ http://argouml.tigris.org/ds/viewMessage.do?dsForumId=450&dsMessageId=2733092 To unsubscribe from this discussion, e-mail: [[email protected]]. To be allowed to post to the list contact the mailing list moderator, email: [[email protected]]
