That work isn't done. We can update the docs later when it's written.

On Fri, Oct 11, 2019, 3:30 AM Krisztián Szűcs <szucs.kriszt...@gmail.com>
wrote:

> There is still an open issue about the flight docs [1], once it is done
> I can update the docs.
>
> [1]: https://issues.apache.org/jira/browse/ARROW-6390
>
> On Thu, Oct 10, 2019 at 11:32 PM Wes McKinney <wesmck...@gmail.com> wrote:
>
> > @Neal -- that's fine, I just want to make sure that in the next
> > release there is a responsible party (the RM?) to seek out someone to
> > help build the documentation rather than let it sit silently
> > unpublished for a week or two. So we may just want to amend the RM
> > guide to include "Find someone to update the docs if you cannot do it
> > yourself"
> >
> > On Thu, Oct 10, 2019 at 3:01 PM Joris Van den Bossche
> > <jorisvandenboss...@gmail.com> wrote:
> > >
> > > Wes, if you don't get to it today, I can try to update the docs
> tomorrow.
> > >
> > > Joris
> > >
> > > On Thu, 10 Oct 2019 at 21:51, Neal Richardson <
> > neal.p.richard...@gmail.com>
> > > wrote:
> > >
> > > > I updated the R docs because I had everything I needed to do that
> > > > locally: https://github.com/apache/arrow-site/pull/30 Doing the
> others
> > > > wasn't feasible for me on my computer (I don't have CUDA, and the
> case
> > > > insensitivity of the macOS file system always bites me with the
> > > > pyarrow docs anyway).
> > > >
> > > > IMO improving our CI/CD around documentation should be a priority for
> > 1.0.
> > > >
> > > > Neal
> > > >
> > > > On Thu, Oct 10, 2019 at 12:03 PM Wes McKinney <wesmck...@gmail.com>
> > wrote:
> > > > >
> > > > > The docs on http://arrow.apache.org/docs/ haven't been updated
> yet.
> > > > > This happened the last release, too -- I ended up updating the docs
> > > > > manually after a week or two. Is this included in the release
> > > > > management guide? If no one beats me to it, I can update the docs
> by
> > > > > hand again later today
> > > > >
> > > > > On Mon, Oct 7, 2019 at 6:20 PM Wes McKinney <wesmck...@gmail.com>
> > wrote:
> > > > > >
> > > > > > I think we might be a little aggressive at removing artifacts
> from
> > the
> > > > > > dist system
> > > > > >
> > > > > > Can we change our process to only remove old dist artifacts when
> we
> > > > > > are about to upload a new RC? Otherwise it's harder to make
> > > > > > improvements to the release verification scripts without any old
> > RC to
> > > > > > test against
> > > > > >
> > > > > > On Mon, Oct 7, 2019 at 5:17 PM Neal Richardson
> > > > > > <neal.p.richard...@gmail.com> wrote:
> > > > > > >
> > > > > > > The R package has been accepted by CRAN. Binaries for macOS and
> > > > > > > Windows should become available in the next few days.
> > > > > > >
> > > > > > > Neal
> > > > > > >
> > > > > > > On Mon, Oct 7, 2019 at 1:41 AM Krisztián Szűcs
> > > > > > > <szucs.kriszt...@gmail.com> wrote:
> > > > > > > >
> > > > > > > > Thanks Andy!
> > > > > > > >
> > > > > > > > I've just removed the RC source artefacts from SVN.
> > > > > > > >
> > > > > > > > We have two remaining post release tasks:
> > > > > > > > - homebrew
> > > > > > > > - apidocs
> > > > > > > >
> > > > > > > > On Mon, Oct 7, 2019 at 1:47 AM Andy Grove <
> > andygrov...@gmail.com>
> > > > wrote:
> > > > > > > >
> > > > > > > > > I released the Rust crates from the RC2 source tarball. I
> > had to
> > > > comment
> > > > > > > > > out the benchmark references in the Cargo.toml first since
> > the
> > > > tarball does
> > > > > > > > > not include the benchmark source code. I filed
> > > > > > > > > https://issues.apache.org/jira/browse/ARROW-6801 for this
> > bug
> > > > and will
> > > > > > > > > fix the packaging before the 1.0.0 release.
> > > > > > > > >
> > > > > > > > > On Sun, Oct 6, 2019 at 2:01 AM Krisztián Szűcs <
> > > > szucs.kriszt...@gmail.com>
> > > > > > > > > wrote:
> > > > > > > > >
> > > > > > > > >> The rust publishing script fails because it cannot find
> the
> > > > benchmarks.
> > > > > > > > >> Seems to be related to cargo changes.
> > > > > > > > >> I cannot investigate it right now, @Andy could you take a
> > look?
> > > > > > > > >>
> > > > > > > > >> On Sun, Oct 6, 2019, 9:11 AM Krisztián Szűcs <
> > > > szucs.kriszt...@gmail.com>
> > > > > > > > >> wrote:
> > > > > > > > >>
> > > > > > > > >>> - published js packages to npm, please check that they
> are
> > > > working
> > > > > > > > >>> properly
> > > > > > > > >>>
> > > > > > > > >>> On Sat, Oct 5, 2019 at 10:14 PM Neal Richardson <
> > > > > > > > >>> neal.p.richard...@gmail.com> wrote:
> > > > > > > > >>>
> > > > > > > > >>>> R release steps per
> > > > > > > > >>>>
> > > > > > > > >>>>
> > > >
> >
> https://cwiki.apache.org/confluence/display/ARROW/Release+Management+Guide#ReleaseManagementGuide-UpdatingRpackages
> > > > > > > > >>>> are underway.
> > > > > > > > >>>>
> > > > > > > > >>>> Neal
> > > > > > > > >>>>
> > > > > > > > >>>> On Sat, Oct 5, 2019 at 8:40 AM Krisztián Szűcs
> > > > > > > > >>>> <szucs.kriszt...@gmail.com> wrote:
> > > > > > > > >>>> >
> > > > > > > > >>>> > - website updated with the release notes
> > > > > > > > >>>> > - conda-forge updates are merged
> > > > > > > > >>>> >
> > > > > > > > >>>> > Remaining:
> > > > > > > > >>>> > - Javascript
> > > > > > > > >>>> > - Rust
> > > > > > > > >>>> > - R
> > > > > > > > >>>> > - Homebrew
> > > > > > > > >>>> > - Apidocs
> > > > > > > > >>>> >
> > > > > > > > >>>> > On Sat, Oct 5, 2019 at 2:58 PM Sutou Kouhei <
> > > > k...@clear-code.com>
> > > > > > > > >>>> wrote:
> > > > > > > > >>>> >
> > > > > > > > >>>> > > - uploaded C# packages
> > > > > > > > >>>> > >
> > > > > > > > >>>> > > In <CAHM19a6eoiMQZSuZ-29n7LBzHxZYxBigw=
> > > > > > > > >>>> t1k_vz68rcb3m...@mail.gmail.com>
> > > > > > > > >>>> > >   "Re: [VOTE] Release Apache Arrow 0.15.0 - RC2" on
> > Sat,
> > > > 5 Oct 2019
> > > > > > > > >>>> > > 14:50:51 +0200,
> > > > > > > > >>>> > >   Krisztián Szűcs <szucs.kriszt...@gmail.com>
> wrote:
> > > > > > > > >>>> > >
> > > > > > > > >>>> > > > - uploaded python wheels to pypi
> > > > > > > > >>>> > > > - uploaded java artifacts to maven central
> > > > > > > > >>>> > > >
> > > > > > > > >>>> > > > I'm going to update the conda recipes.
> > > > > > > > >>>> > > >
> > > > > > > > >>>> > > > Remaining:
> > > > > > > > >>>> > > > - Javascript
> > > > > > > > >>>> > > > - Rust
> > > > > > > > >>>> > > > - C#
> > > > > > > > >>>> > > > - R
> > > > > > > > >>>> > > > - Homebrew
> > > > > > > > >>>> > > > - Site
> > > > > > > > >>>> > > >
> > > > > > > > >>>> > > >
> > > > > > > > >>>> > > >
> > > > > > > > >>>> > > > On Sat, Oct 5, 2019 at 2:29 PM Krisztián Szűcs <
> > > > > > > > >>>> > > szucs.kriszt...@gmail.com>
> > > > > > > > >>>> > > > wrote:
> > > > > > > > >>>> > > >
> > > > > > > > >>>> > > >> - rebased master
> > > > > > > > >>>> > > >> - rebased the pull requests
> > > > > > > > >>>> > > >> - released the jira version
> > > > > > > > >>>> > > >> - started the new jira version
> > > > > > > > >>>> > > >> - uploaded source artifacts to svn
> > > > > > > > >>>> > > >> - uploaded binary artifacts to bintray
> > > > > > > > >>>> > > >> - currently uploading python wheels to pypi
> > > > > > > > >>>> > > >>
> > > > > > > > >>>> > > >>
> > > > > > > > >>>> > > >> On Sat, Oct 5, 2019 at 2:04 PM Sutou Kouhei <
> > > > k...@clear-code.com>
> > > > > > > > >>>> wrote:
> > > > > > > > >>>> > > >>
> > > > > > > > >>>> > > >>> I'll release RubyGems.
> > > > > > > > >>>> > > >>>
> > > > > > > > >>>> > > >>> In <
> > > > > > > > >>>>
> > > > cahm19a5pxw5mq5zgb7pxoerg9rkxrhmadcrpmkw12jkjokw...@mail.gmail.com
> > > > > > > > >>>> > > >
> > > > > > > > >>>> > > >>>   "Re: [VOTE] Release Apache Arrow 0.15.0 - RC2"
> > on
> > > > Sat, 5 Oct
> > > > > > > > >>>> 2019
> > > > > > > > >>>> > > >>> 11:46:16 +0200,
> > > > > > > > >>>> > > >>>   Krisztián Szűcs <szucs.kriszt...@gmail.com>
> > wrote:
> > > > > > > > >>>> > > >>>
> > > > > > > > >>>> > > >>> > On Sat, Oct 5, 2019 at 11:40 AM Krisztián
> Szűcs
> > <
> > > > > > > > >>>> > > >>> szucs.kriszt...@gmail.com>
> > > > > > > > >>>> > > >>> > wrote:
> > > > > > > > >>>> > > >>> >
> > > > > > > > >>>> > > >>> >> The VOTE carries with 5 binding +1 votes and
> 2
> > > > non-binding
> > > > > > > > >>>> +1 votes.
> > > > > > > > >>>> > > >>> >>
> > > > > > > > >>>> > > >>> >> On Fri, Oct 4, 2019 at 10:04 PM Wes McKinney
> <
> > > > > > > > >>>> wesmck...@gmail.com>
> > > > > > > > >>>> > > >>> wrote:
> > > > > > > > >>>> > > >>> >>
> > > > > > > > >>>> > > >>> >>> The commits from your local RC branch aren't
> > > > available so I
> > > > > > > > >>>> cannot
> > > > > > > > >>>> > > >>> >>> rebase master yet, I'll just wait for you to
> > be
> > > > available
> > > > > > > > >>>> again.
> > > > > > > > >>>> > > >>> >>
> > > > > > > > >>>> > > >>> >> Actually those commits are available under
> the
> > tag.
> > > > > > > > >>>> > > >>> >>
> > > > > > > > >>>> > > >>> > The new version updates are indeed only
> > available
> > > > locally.
> > > > > > > > >>>> I'm doing
> > > > > > > > >>>> > > the
> > > > > > > > >>>> > > >>> > rebase.
> > > > > > > > >>>> > > >>> >
> > > > > > > > >>>> > > >>> >> If anyone has some spare time we should try
> to
> > > > complete as
> > > > > > > > >>>> many
> > > > > > > > >>>> > > >>> >>> post-release tasks this weekend so we can
> > > > announce the
> > > > > > > > >>>> release on
> > > > > > > > >>>> > > >>> >>> Monday or Tuesday next week.
> > > > > > > > >>>> > > >>> >>>
> > > > > > > > >>>> > > >>> >>
> > > > > > > > >>>> > > >>> >> We have many post-release tasks, any help is
> > > > appreciated.
> > > > > > > > >>>> > > >>> >>
> > > > > > > > >>>> > > >>> >>>
> > > > > > > > >>>> > > >>> >>> Thanks all for your help getting this
> release
> > > > ready!
> > > > > > > > >>>> > > >>> >>>
> > > > > > > > >>>> > > >>> >>> On Fri, Oct 4, 2019 at 6:40 AM Krisztián
> Szűcs
> > > > > > > > >>>> > > >>> >>> <szucs.kriszt...@gmail.com> wrote:
> > > > > > > > >>>> > > >>> >>> >
> > > > > > > > >>>> > > >>> >>> > We have 5 binding +1 votes and 2
> > non-binding +1
> > > > votes so
> > > > > > > > >>>> far.
> > > > > > > > >>>> > > >>> >>> > The 72 hours has passed, so we can close
> the
> > > > release vote.
> > > > > > > > >>>> > > >>> >>> >
> > > > > > > > >>>> > > >>> >>> > Sadly I won't be available for the rest of
> > the
> > > > day, so I
> > > > > > > > >>>> will be
> > > > > > > > >>>> > > >>> able
> > > > > > > > >>>> > > >>> >>> > to close the vote and start to work on the
> > the
> > > > post
> > > > > > > > >>>> release tasks
> > > > > > > > >>>> > > >>> >>> > from tomorrow.
> > > > > > > > >>>> > > >>> >>> > @Wes if you have bandwidth feel free to
> > close
> > > > the vote
> > > > > > > > >>>> sooner.
> > > > > > > > >>>> > > >>> >>> >
> > > > > > > > >>>> > > >>> >>> >
> > > > > > > > >>>> > > >>> >>> > On Thu, Oct 3, 2019 at 1:14 AM Bryan
> Cutler
> > <
> > > > > > > > >>>> cutl...@gmail.com>
> > > > > > > > >>>> > > >>> wrote:
> > > > > > > > >>>> > > >>> >>> >
> > > > > > > > >>>> > > >>> >>> > > Accidentally sent too soon. The ORC
> build
> > > > error I got
> > > > > > > > >>>> was
> > > > > > > > >>>> > > probably
> > > > > > > > >>>> > > >>> >>> just an
> > > > > > > > >>>> > > >>> >>> > > env issue for me, but here it is in case
> > > > anyone else
> > > > > > > > >>>> had the
> > > > > > > > >>>> > > same
> > > > > > > > >>>> > > >>> >>> issue:
> > > > > > > > >>>> > > >>> >>> > >
> > > > > > > > >>>> > > >>> >>> > > In file included from
> > > > > > > > >>>> > > >>> >>> > >
> > > > > > > > >>>> > > >>> >>> > >
> > > > > > > > >>>> > > >>> >>>
> > > > > > > > >>>> > > >>>
> > > > > > > > >>>> > >
> > > > > > > > >>>>
> > > >
> >
> ESC[01mESC[K/tmp/arrow-0.15.0.KxYbA/apache-arrow-0.15.0/cpp/build/orc_ep-prefix/src/orc_ep/c++/src/wrap/orc-proto-wrapper.cc:44:0ESC[mESC[K:
> > > > > > > > >>>> > > >>> >>> > >
> > > > > > > > >>>> > > >>> >>> > >
> > > > > > > > >>>> > > >>> >>>
> > > > > > > > >>>> > > >>>
> > > > > > > > >>>> > >
> > > > > > > > >>>>
> > > >
> >
> ESC[01mESC[K/tmp/arrow-0.15.0.KxYbA/apache-arrow-0.15.0/cpp/build/orc_ep-prefix/src/orc_ep-build/c++/src/
> > > > > > > > >>>> > > >>> >>> orc_proto.pb.cc:970
> > > > > > > > >>>> > > >>> >>> > > :13:ESC[mESC[K
> > > > > > > > >>>> > > >>> >>> > > ESC[01;31mESC[Kerror:
> > > > > > > > >>>> > > >>> >>> > >
> > > > > > > > >>>> > > >>> >>>
> > > > > > > > >>>> > > >>>
> > > > > > > > >>>> > >
> > > > > > > > >>>>
> > > >
> > ESC[mESC[K‘ESC[01mESC[Kdynamic_init_dummy_orc_5fproto_2eprotoESC[mESC[K’
> > > > > > > > >>>> > > >>> >>> > > defined but not used
> > [-Werror=unused-variable]
> > > > > > > > >>>> > > >>> >>> > >  static bool
> > > > dynamic_init_dummy_orc_5fproto_2eproto =
> > > > > > > > >>>> []() {
> > > > > > > > >>>> > > >>> >>> > > AddDescriptors_orc_5fproto_2eproto();
> > return
> > > > true; }();
> > > > > > > > >>>> > > >>> >>> > > ESC[01;32mESC[K             ^ESC[mESC[K
> > > > > > > > >>>> > > >>> >>> > > cc1plus: all warnings being treated as
> > errors
> > > > > > > > >>>> > > >>> >>> > > make[5]: ***
> > > > > > > > >>>> > > >>>
> > > > [c++/src/CMakeFiles/orc.dir/wrap/orc-proto-wrapper.cc.o]
> > > > > > > > >>>> > > >>> >>> Error
> > > > > > > > >>>> > > >>> >>> > > 1
> > > > > > > > >>>> > > >>> >>> > > make[5]: *** Waiting for unfinished
> > jobs....
> > > > > > > > >>>> > > >>> >>> > > make[4]: ***
> > [c++/src/CMakeFiles/orc.dir/all]
> > > > Error 2
> > > > > > > > >>>> > > >>> >>> > > make[3]: *** [all] Error 2
> > > > > > > > >>>> > > >>> >>> > >
> > > > > > > > >>>> > > >>> >>> > > [ 29%] Performing build step for
> 'orc_ep'
> > > > > > > > >>>> > > >>> >>> > > CMake Error at
> > > > > > > > >>>> > > >>> >>> > >
> > > > > > > > >>>> > > >>> >>> > >
> > > > > > > > >>>> > > >>> >>>
> > > > > > > > >>>> > > >>>
> > > > > > > > >>>> > >
> > > > > > > > >>>>
> > > >
> >
> /tmp/arrow-0.15.0.KxYbA/apache-arrow-0.15.0/cpp/build/orc_ep-prefix/src/orc_ep-stamp/orc_ep-build-RELEASE.cmake:16
> > > > > > > > >>>> > > >>> >>> > > (message):
> > > > > > > > >>>> > > >>> >>> > >   Command failed: 2
> > > > > > > > >>>> > > >>> >>> > >
> > > > > > > > >>>> > > >>> >>> > >    'make'
> > > > > > > > >>>> > > >>> >>> > >
> > > > > > > > >>>> > > >>> >>> > >   See also
> > > > > > > > >>>> > > >>> >>> > >
> > > > > > > > >>>> > > >>> >>> > >
> > > > > > > > >>>> > > >>> >>> > >
> > > > > > > > >>>> > > >>> >>> > >
> > > > > > > > >>>> > > >>> >>>
> > > > > > > > >>>> > > >>>
> > > > > > > > >>>> > >
> > > > > > > > >>>>
> > > >
> >
> /tmp/arrow-0.15.0.KxYbA/apache-arrow-0.15.0/cpp/build/orc_ep-prefix/src/orc_ep-stamp/orc_ep-build-*.log
> > > > > > > > >>>> > > >>> >>> > >
> > > > > > > > >>>> > > >>> >>> > > CMakeFiles/orc_ep.dir/build.make:111:
> > recipe
> > > > for target
> > > > > > > > >>>> > > >>> >>> > >
> > 'orc_ep-prefix/src/orc_ep-stamp/orc_ep-build'
> > > > failed
> > > > > > > > >>>> > > >>> >>> > > make[2]: ***
> > > > > > > > >>>> [orc_ep-prefix/src/orc_ep-stamp/orc_ep-build]
> > > > > > > > >>>> > > Error 1
> > > > > > > > >>>> > > >>> >>> > > CMakeFiles/Makefile2:1248: recipe for
> > target
> > > > > > > > >>>> > > >>> >>> 'CMakeFiles/orc_ep.dir/all'
> > > > > > > > >>>> > > >>> >>> > > failed
> > > > > > > > >>>> > > >>> >>> > > make[1]: *** [CMakeFiles/orc_ep.dir/all]
> > > > Error 2
> > > > > > > > >>>> > > >>> >>> > >
> > > > > > > > >>>> > > >>> >>> > > On Wed, Oct 2, 2019 at 4:12 PM Bryan
> > Cutler <
> > > > > > > > >>>> cutl...@gmail.com
> > > > > > > > >>>> > > >
> > > > > > > > >>>> > > >>> >>> wrote:
> > > > > > > > >>>> > > >>> >>> > >
> > > > > > > > >>>> > > >>> >>> > > > +1 (non-binding)
> > > > > > > > >>>> > > >>> >>> > > >
> > > > > > > > >>>> > > >>> >>> > > > I ran the following on Ubuntu 16.04
> > > > 4.15.0-64-generic:
> > > > > > > > >>>> > > >>> >>> > > > >
> > dev/release/verify-release-candidate.sh
> > > > binaries
> > > > > > > > >>>> 0.15.0 2
> > > > > > > > >>>> > > >>> >>> > > > > ARROW_CUDA=OFF \
> > > > > > > > >>>> > > >>> >>> > > > TEST_DEFAULT=0 \
> > > > > > > > >>>> > > >>> >>> > > > TEST_SOURCE=1 \
> > > > > > > > >>>> > > >>> >>> > > > TEST_CPP=1 \
> > > > > > > > >>>> > > >>> >>> > > > TEST_PYTHON=1 \
> > > > > > > > >>>> > > >>> >>> > > > TEST_JAVA=1 \
> > > > > > > > >>>> > > >>> >>> > > > TEST_INTEGRATION=1 \
> > > > > > > > >>>> > > >>> >>> > > >
> dev/release/verify-release-candidate.sh
> > > > source 0.15.0
> > > > > > > > >>>> 2
> > > > > > > > >>>> > > >>> >>> > > >
> > > > > > > > >>>> > > >>> >>> > > > For source verification I set
> > > > > > > > >>>> > > >>> INTEGRATION_TEST_ARGS="--enable-js=0
> > > > > > > > >>>> > > >>> >>> > > > --enable-go=0"
> > > > > > > > >>>> > > >>> >>> > > >
> > > > > > > > >>>> > > >>> >>> > > > When attempting source verification
> with
> > > > defaults, I
> > > > > > > > >>>> got the
> > > > > > > > >>>> > > >>> below
> > > > > > > > >>>> > > >>> >>> error
> > > > > > > > >>>> > > >>> >>> > > > when building the ORC adapter. It
> looks
> > > > like just a
> > > > > > > > >>>> warning
> > > > > > > > >>>> > > >>> that is
> > > > > > > > >>>> > > >>> >>> being
> > > > > > > > >>>> > > >>> >>> > > > treated as error and seems to be only
> in
> > > > > > > > >>>> > > >>> >>> > > >
> > > > > > > > >>>> > > >>> >>> > > > On Wed, Oct 2, 2019 at 7:53 AM Andy
> > Grove <
> > > > > > > > >>>> > > >>> andygrov...@gmail.com>
> > > > > > > > >>>> > > >>> >>> wrote:
> > > > > > > > >>>> > > >>> >>> > > >
> > > > > > > > >>>> > > >>> >>> > > >> +1 (binding)
> > > > > > > > >>>> > > >>> >>> > > >>
> > > > > > > > >>>> > > >>> >>> > > >> On Mon, Sep 30, 2019 at 11:57 PM
> > Krisztián
> > > > Szűcs <
> > > > > > > > >>>> > > >>> >>> > > >> szucs.kriszt...@gmail.com>
> > > > > > > > >>>> > > >>> >>> > > >> wrote:
> > > > > > > > >>>> > > >>> >>> > > >>
> > > > > > > > >>>> > > >>> >>> > > >> > Hi,
> > > > > > > > >>>> > > >>> >>> > > >> >
> > > > > > > > >>>> > > >>> >>> > > >> > I would like to propose the
> following
> > > > release
> > > > > > > > >>>> candidate
> > > > > > > > >>>> > > >>> (RC2) of
> > > > > > > > >>>> > > >>> >>> > > Apache
> > > > > > > > >>>> > > >>> >>> > > >> > Arrow version 0.15.0. This is a
> > release
> > > > consiting
> > > > > > > > >>>> of 697
> > > > > > > > >>>> > > >>> >>> > > >> > resolved JIRA issues[1].
> > > > > > > > >>>> > > >>> >>> > > >> >
> > > > > > > > >>>> > > >>> >>> > > >> > This release candidate is based on
> > > > commit:
> > > > > > > > >>>> > > >>> >>> > > >> >
> > 40d468e162e88e1761b1e80b3ead060f0be927ee
> > > > [2]
> > > > > > > > >>>> > > >>> >>> > > >> >
> > > > > > > > >>>> > > >>> >>> > > >> > The source release rc2 is hosted at
> > [3].
> > > > > > > > >>>> > > >>> >>> > > >> > The binary artifacts are hosted at
> > > > [4][5][6][7].
> > > > > > > > >>>> > > >>> >>> > > >> > The changelog is located at [8].
> > > > > > > > >>>> > > >>> >>> > > >> >
> > > > > > > > >>>> > > >>> >>> > > >> > Please download, verify checksums
> and
> > > > signatures,
> > > > > > > > >>>> run the
> > > > > > > > >>>> > > >>> unit
> > > > > > > > >>>> > > >>> >>> tests,
> > > > > > > > >>>> > > >>> >>> > > >> > and vote on the release. See [9]
> for
> > how
> > > > to
> > > > > > > > >>>> validate a
> > > > > > > > >>>> > > >>> release
> > > > > > > > >>>> > > >>> >>> > > >> candidate.
> > > > > > > > >>>> > > >>> >>> > > >> >
> > > > > > > > >>>> > > >>> >>> > > >> > The vote will be open for at least
> 72
> > > > hours.
> > > > > > > > >>>> > > >>> >>> > > >> >
> > > > > > > > >>>> > > >>> >>> > > >> > [ ] +1 Release this as Apache Arrow
> > > > 0.15.0
> > > > > > > > >>>> > > >>> >>> > > >> > [ ] +0
> > > > > > > > >>>> > > >>> >>> > > >> > [ ] -1 Do not release this as
> Apache
> > > > Arrow 0.15.0
> > > > > > > > >>>> > > because...
> > > > > > > > >>>> > > >>> >>> > > >> >
> > > > > > > > >>>> > > >>> >>> > > >> > [1]:
> > > > > > > > >>>> > > >>> >>> > > >> >
> > > > > > > > >>>> > > >>> >>> > > >> >
> > > > > > > > >>>> > > >>> >>> > > >>
> > > > > > > > >>>> > > >>> >>> > >
> > > > > > > > >>>> > > >>> >>>
> > > > > > > > >>>> > > >>>
> > > > > > > > >>>> > >
> > > > > > > > >>>>
> > > >
> >
> https://issues.apache.org/jira/issues/?jql=project%20%3D%20ARROW%20AND%20status%20in%20%28Resolved%2C%20Closed%29%20AND%20fixVersion%20%3D%200.15.0
> > > > > > > > >>>> > > >>> >>> > > >> > [2]:
> > > > > > > > >>>> > > >>> >>> > > >> >
> > > > > > > > >>>> > > >>> >>> > > >> >
> > > > > > > > >>>> > > >>> >>> > > >>
> > > > > > > > >>>> > > >>> >>> > >
> > > > > > > > >>>> > > >>> >>>
> > > > > > > > >>>> > > >>>
> > > > > > > > >>>> > >
> > > > > > > > >>>>
> > > >
> >
> https://github.com/apache/arrow/tree/40d468e162e88e1761b1e80b3ead060f0be927ee
> > > > > > > > >>>> > > >>> >>> > > >> > [3]:
> > > > > > > > >>>> > > >>> >>> > > >>
> > > > > > > > >>>> > > >>> >>>
> > > > > > > > >>>> > >
> > > > > > > > >>>>
> > > > https://dist.apache.org/repos/dist/dev/arrow/apache-arrow-0.15.0-rc2
> > > > > > > > >>>> > > >>> >>> > > >> > [4]:
> > > > > > > > >>>> > >
> https://bintray.com/apache/arrow/centos-rc/0.15.0-rc2
> > > > > > > > >>>> > > >>> >>> > > >> > [5]:
> > > > > > > > >>>> > >
> https://bintray.com/apache/arrow/debian-rc/0.15.0-rc2
> > > > > > > > >>>> > > >>> >>> > > >> > [6]:
> > > > > > > > >>>> > >
> https://bintray.com/apache/arrow/python-rc/0.15.0-rc2
> > > > > > > > >>>> > > >>> >>> > > >> > [7]:
> > > > > > > > >>>> > >
> https://bintray.com/apache/arrow/ubuntu-rc/0.15.0-rc2
> > > > > > > > >>>> > > >>> >>> > > >> > [8]:
> > > > > > > > >>>> > > >>> >>> > > >> >
> > > > > > > > >>>> > > >>> >>> > > >> >
> > > > > > > > >>>> > > >>> >>> > > >>
> > > > > > > > >>>> > > >>> >>> > >
> > > > > > > > >>>> > > >>> >>>
> > > > > > > > >>>> > > >>>
> > > > > > > > >>>> > >
> > > > > > > > >>>>
> > > >
> >
> https://github.com/apache/arrow/blob/40d468e162e88e1761b1e80b3ead060f0be927ee/CHANGELOG.md
> > > > > > > > >>>> > > >>> >>> > > >> > [9]:
> > > > > > > > >>>> > > >>> >>> > > >> >
> > > > > > > > >>>> > > >>> >>> > > >> >
> > > > > > > > >>>> > > >>> >>> > > >>
> > > > > > > > >>>> > > >>> >>> > >
> > > > > > > > >>>> > > >>> >>>
> > > > > > > > >>>> > > >>>
> > > > > > > > >>>> > >
> > > > > > > > >>>>
> > > >
> >
> https://cwiki.apache.org/confluence/display/ARROW/How+to+Verify+Release+Candidates
> > > > > > > > >>>> > > >>> >>> > > >> >
> > > > > > > > >>>> > > >>> >>> > > >>
> > > > > > > > >>>> > > >>> >>> > > >
> > > > > > > > >>>> > > >>> >>> > >
> > > > > > > > >>>> > > >>> >>>
> > > > > > > > >>>> > > >>> >>
> > > > > > > > >>>> > > >>>
> > > > > > > > >>>> > > >>
> > > > > > > > >>>> > >
> > > > > > > > >>>>
> > > > > > > > >>>
> > > >
> >
>

Reply via email to