Dear all, I need some helps. I couldn't start asterix. I have tried to start/stop many times with no luck. I'm running on version 0.8.7. Here is an info from the 'describe' command.
siripen@sln:~/tools/asterixdb/bin$ ./managix describe -n eventshop INFO: Name:eventshop Created:Wed Dec 23 20:53:20 PST 2015 Web-Url:http://127.0.0.1:19001 State:ACTIVE (Mon Mar 21 18:12:34 PDT 2016) WARNING!:Node Controller not running at the following nodes 127.0.0.1 --- Here is the content in my log file related to that. I attached logs and conf files in the email. Mar 21, 2016 6:13:00 PM edu.uci.ics.asterix.transaction.management.service.logging.LogManager initializeLogManager INFO: LogManager starts logging in LSN: 4346430842 Mar 21, 2016 6:13:00 PM edu.uci.ics.asterix.common.feeds.FeedMemoryManager <init> INFO: Feed Memory budget 512 frames (frame size=131072) Mar 21, 2016 6:13:00 PM edu.uci.ics.asterix.hyracks.bootstrap.NCApplicationEntryPoint start INFO: System is in a state: CORRUPTED Best, Siripen
<!-- ! Copyright 2009-2013 by The Regents of the University of California ! Licensed under the Apache License, Version 2.0 (the "License"); ! you may not use this file except in compliance with the License. ! you may obtain a copy of the License from ! ! http://www.apache.org/licenses/LICENSE-2.0 ! ! Unless required by applicable law or agreed to in writing, software ! distributed under the License is distributed on an "AS IS" BASIS, ! WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. ! See the License for the specific language governing permissions and ! limitations under the License. !--> <asterixConfiguration xmlns="asterixconf"> <property> <name>nc.java.opts</name> <value>-Xmx4096m</value> <description>JVM parameters for each Node Contoller (NC) (default: -Xmx1536m) </description> </property> <property> <name>cc.java.opts</name> <value>-Xmx2048m</value> <description>JVM parameters for each Cluster Contoller (CC) (default: -Xmx1024m) </description> </property> <property> <name>max.wait.active.cluster</name> <value>60</value> <description>Maximum wait (in seconds) for a cluster to be ACTIVE (all nodes are available) before a submitted query/statement can be executed. (Default = 60 seconds) </description> </property> <property> <name>storage.buffercache.pagesize</name> <value>131072</value> <description>The page size in bytes for pages in the buffer cache. (Default = "131072" // 128KB) </description> </property> <property> <name>storage.buffercache.size</name> <value>2147483648</value> <description>The size of memory allocated to the disk buffer cache. The value should be a multiple of the buffer cache page size(Default = "536870912" // 512MB) </description> </property> <property> <name>storage.buffercache.maxopenfiles</name> <value>214748364</value> <description>The maximum number of open files in the buffer cache. (Default = "214748364") </description> </property> <property> <name>storage.memorycomponent.pagesize</name> <value>262144</value> <description>The page size in bytes for pages allocated to memory components. (Default = "131072" // 128KB) </description> </property> <property> <name>storage.memorycomponent.numpages</name> <value>256</value> <description>The number of pages to allocate for a memory component. (Default = 256) </description> </property> <property> <name>storage.metadata.memorycomponent.numpages</name> <value>64</value> <description>The number of pages to allocate for a memory component. (Default = 64) </description> </property> <property> <name>storage.memorycomponent.numcomponents</name> <value>5</value> <description>The number of memory components to be used per lsm index. (Default = 2) </description> </property> <property> <name>storage.memorycomponent.globalbudget</name> <value>2147483648</value> <description>The total size of memory in bytes that the sum of all open memory components cannot exceed. (Default = "536870192" // 512MB) </description> </property> <property> <name>storage.lsm.bloomfilter.falsepositiverate</name> <value>0.01</value> <description>The maximum acceptable false positive rate for bloom filters associated with LSM indexes. (Default = "0.01" // 1%) </description> </property> <property> <name>txn.log.buffer.numpages</name> <value>8</value> <description>The number of in-memory log buffer pages. (Default = "8") </description> </property> <property> <name>txn.log.buffer.pagesize</name> <value>524288</value> <description>The size of pages in the in-memory log buffer. (Default = "524288" // 512KB) </description> </property> <property> <name>txn.log.partitionsize</name> <value>2147483648</value> <description>The maximum size of a log file partition allowed before rotating the log to the next partition. (Default = "2147483648" // 2GB) </description> </property> <property> <name>txn.log.checkpoint.lsnthreshold</name> <value>67108864</value> <description>The size of the window that the maximum LSN is allowed to be ahead of the checkpoint LSN by. (Default = ""67108864" // 64M) </description> </property> <property> <name>txn.log.checkpoint.pollfrequency</name> <value>120</value> <description>The time in seconds between that the checkpoint thread waits between polls. (Default = "120" // 120s) </description> </property> <property> <name>txn.log.checkpoint.history</name> <value>0</value> <description>The number of old log partition files to keep before discarding. (Default = "0") </description> </property> <property> <name>txn.lock.escalationthreshold</name> <value>1000</value> <description>The number of entity level locks that need to be acquired before the locks are coalesced and escalated into a dataset level lock. (Default = "1000") </description> </property> <property> <name>txn.lock.shrinktimer</name> <value>5000</value> <description>The time in milliseconds to wait before deallocating unused lock manager memory. (Default = "5000" // 5s) </description> </property> <property> <name>txn.lock.timeout.waitthreshold</name> <value>60000</value> <description>The time in milliseconds to wait before labeling a transaction which has been waiting for a lock timed-out. (Default = "60000" // 60s) </description> </property> <property> <name>txn.lock.timeout.sweepthreshold</name> <value>10000</value> <description>The time in milliseconds the timeout thread waits between sweeps to detect timed-out transactions. (Default = "10000" // 10s) </description> </property> <property> <name>compiler.sortmemory</name> <value>33554432</value> <description>The amount of memory in bytes given to sort operations. (Default = "33554432" // 32mb) </description> </property> <property> <name>compiler.joinmemory</name> <value>33554432</value> <description>The amount of memory in bytes given to join operations. (Default = "33554432" // 32mb) </description> </property> <property> <name>compiler.framesize</name> <value>131072</value> <description>The Hyracks frame size that the compiler configures per job. (Default = "131072" // 128KB) </description> </property> <property> <name>web.port</name> <value>19001</value> <description>The port for the ASTERIX web interface. (Default = 19001) </description> </property> <property> <name>api.port</name> <value>19002</value> <description>The port for the ASTERIX API server. (Default = 19002) </description> </property> <property> <name>log.level</name> <value>INFO</value> <description>The minimum log level to be displayed. (Default = INFO) </description> </property> <property> <name>plot.activate</name> <value>false</value> <description>Enabling plot of Algebricks plan to tmp folder. (Default = false) </description> </property> </asterixConfiguration>
