This is an automated email from the ASF dual-hosted git repository.
chenBright pushed a commit to branch master
in repository https://gitbox.apache.org/repos/asf/brpc.git
The following commit(s) were added to refs/heads/master by this push:
new 82a68192 build(cmake): Modernize target-scoped CMake configuration
(#3377)
82a68192 is described below
commit 82a681929738fabc036980d0432017b20b2ae06b
Author: darion-yaphet <[email protected]>
AuthorDate: Sun Jul 12 00:02:52 2026 +0800
build(cmake): Modernize target-scoped CMake configuration (#3377)
* build(cmake): keep modern CMake policy compatibility
Raise the minimum CMake version range to 3.16...3.28 so CMake 4.x no longer
treats the project as relying on removed pre-3.5 policy compatibility. The
range preserves a conservative 3.16 runtime floor while documenting policy
validation through 3.28.
* build(cmake): modernize target-scoped CMake configuration
Move shared compile definitions, include paths, options, and link
dependencies onto interface targets so top-level, src, tools, tests, and
standalone examples consume consistent build settings without relying on global
directory state.
Examples now share a small CMake helper, and the gtest download path is
updated to configure with modern CMake while keeping downloaded gtest headers
ahead of Homebrew's C++17-only installation.
---
CMakeLists.txt | 164 +++++++++++++--------
cmake/CMakeLists.download_gtest.in | 2 +-
example/asynchronous_echo_c++/CMakeLists.txt | 52 ++-----
example/auto_concurrency_limiter/CMakeLists.txt | 52 ++-----
example/backup_request_c++/CMakeLists.txt | 52 ++-----
.../baidu_proxy_and_generic_call/CMakeLists.txt | 55 +++----
example/bthread_tag_echo_c++/CMakeLists.txt | 55 ++-----
example/cancel_c++/CMakeLists.txt | 52 ++-----
example/cascade_echo_c++/CMakeLists.txt | 52 ++-----
example/cmake/BrpcExample.cmake | 75 ++++++++++
example/dynamic_partition_echo_c++/CMakeLists.txt | 55 ++-----
example/echo_c++/CMakeLists.txt | 52 ++-----
example/grpc_c++/CMakeLists.txt | 54 ++-----
example/http_c++/CMakeLists.txt | 58 +++-----
example/memcache_c++/CMakeLists.txt | 49 ++----
example/multi_threaded_echo_c++/CMakeLists.txt | 55 ++-----
example/multi_threaded_echo_fns_c++/CMakeLists.txt | 55 ++-----
example/nshead_extension_c++/CMakeLists.txt | 52 ++-----
example/nshead_pb_extension_c++/CMakeLists.txt | 52 ++-----
example/parallel_echo_c++/CMakeLists.txt | 55 ++-----
example/partition_echo_c++/CMakeLists.txt | 55 ++-----
example/rdma_performance/CMakeLists.txt | 53 ++-----
example/redis_c++/CMakeLists.txt | 57 +++----
example/rpcz_echo_c++/CMakeLists.txt | 52 ++-----
example/selective_echo_c++/CMakeLists.txt | 55 ++-----
.../session_data_and_thread_local/CMakeLists.txt | 54 ++-----
example/streaming_batch_echo_c++/CMakeLists.txt | 56 +++----
example/streaming_echo_c++/CMakeLists.txt | 52 ++-----
src/CMakeLists.txt | 27 ++--
test/CMakeLists.txt | 82 ++++++-----
tools/parallel_http/CMakeLists.txt | 2 +-
tools/rpc_press/CMakeLists.txt | 4 +-
tools/rpc_replay/CMakeLists.txt | 4 +-
tools/rpc_view/CMakeLists.txt | 4 +-
tools/trackme_server/CMakeLists.txt | 2 +-
35 files changed, 636 insertions(+), 1071 deletions(-)
diff --git a/CMakeLists.txt b/CMakeLists.txt
index f30859dd..130860ae 100644
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -15,7 +15,7 @@
# specific language governing permissions and limitations
# under the License.
-cmake_minimum_required(VERSION 2.8.12)
+cmake_minimum_required(VERSION 3.16...3.28)
project(brpc C CXX)
option(WITH_GLOG "With glog" OFF)
@@ -51,7 +51,7 @@ if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
if(CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.8)
message(FATAL_ERROR "GCC is too old, please install a newer version
supporting C++11")
endif()
-elseif(CMAKE_CXX_COMPILER_ID STREQUAL "Clang")
+elseif(CMAKE_CXX_COMPILER_ID MATCHES "Clang")
# require at least clang 3.3
if(CMAKE_CXX_COMPILER_VERSION VERSION_LESS 3.3)
message(FATAL_ERROR "Clang is too old, please install a newer version
supporting C++11")
@@ -60,6 +60,15 @@ else()
message(WARNING "You are using an unsupported compiler! Compilation has
only been tested with Clang and GCC.")
endif()
+set(BRPC_COMMON_COMPILE_OPTIONS)
+set(BRPC_COMMON_DEFINITIONS)
+set(BRPC_COMMON_INCLUDE_DIRS
+ ${PROJECT_SOURCE_DIR}/src
+ ${CMAKE_CURRENT_BINARY_DIR}
+)
+set(BRPC_COMMON_LINK_OPTIONS)
+set(BRPC_CXX_STANDARD 11)
+
set(WITH_GLOG_VAL "0")
if(WITH_GLOG)
set(WITH_GLOG_VAL "1")
@@ -67,7 +76,7 @@ if(WITH_GLOG)
endif()
if(WITH_DEBUG_SYMBOLS)
- set(DEBUG_SYMBOL "-g")
+ list(APPEND BRPC_COMMON_COMPILE_OPTIONS -g)
endif()
set(WITH_DEBUG_LOCK_VAL "0")
@@ -76,7 +85,7 @@ if(WITH_DEBUG_LOCK)
endif()
if(WITH_THRIFT)
- set(THRIFT_CPP_FLAG "-DENABLE_THRIFT_FRAMED_PROTOCOL")
+ list(APPEND BRPC_COMMON_DEFINITIONS ENABLE_THRIFT_FRAMED_PROTOCOL)
find_library(THRIFT_LIB NAMES thrift)
if (NOT THRIFT_LIB)
message(FATAL_ERROR "Fail to find Thrift")
@@ -95,8 +104,8 @@ if (WITH_BTHREAD_TRACER)
endif()
find_package(absl REQUIRED CONFIG)
set(bthread_tracer_ABSL_USED_TARGETS absl::base absl::stacktrace
absl::symbolize)
- add_definitions(-DBRPC_BTHREAD_TRACER)
- include_directories(${LIBUNWIND_INCLUDE_PATH})
+ list(APPEND BRPC_COMMON_DEFINITIONS BRPC_BTHREAD_TRACER)
+ list(APPEND BRPC_COMMON_INCLUDE_DIRS ${LIBUNWIND_INCLUDE_PATH})
endif ()
set(WITH_RDMA_VAL "0")
@@ -117,80 +126,94 @@ list(APPEND CMAKE_MODULE_PATH
"${PROJECT_SOURCE_DIR}/cmake")
find_package(GFLAGS REQUIRED)
-include_directories(
- ${PROJECT_SOURCE_DIR}/src
- ${CMAKE_CURRENT_BINARY_DIR}
-)
-
execute_process(
COMMAND bash -c "${PROJECT_SOURCE_DIR}/tools/get_brpc_revision.sh
${PROJECT_SOURCE_DIR} | tr -d '\n'"
OUTPUT_VARIABLE BRPC_REVISION
)
+string(REPLACE "\\|" "|" BRPC_REVISION "${BRPC_REVISION}")
if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
include(CheckFunctionExists)
CHECK_FUNCTION_EXISTS(clock_gettime HAVE_CLOCK_GETTIME)
if(NOT HAVE_CLOCK_GETTIME)
- set(DEFINE_CLOCK_GETTIME "-DNO_CLOCK_GETTIME_IN_MAC")
+ list(APPEND BRPC_COMMON_DEFINITIONS NO_CLOCK_GETTIME_IN_MAC)
endif()
- set(CMAKE_CPP_FLAGS "${CMAKE_CPP_FLAGS} -Wno-deprecated-declarations
-Wno-inconsistent-missing-override")
+ list(APPEND BRPC_COMMON_COMPILE_OPTIONS
+ -Wno-deprecated-declarations
+ -Wno-inconsistent-missing-override
+ )
endif()
-set(CMAKE_CPP_FLAGS "${CMAKE_CPP_FLAGS} ${DEFINE_CLOCK_GETTIME}
-DBRPC_WITH_GLOG=${WITH_GLOG_VAL} -DBRPC_WITH_RDMA=${WITH_RDMA_VAL}
-DBRPC_DEBUG_BTHREAD_SCHE_SAFETY=${WITH_DEBUG_BTHREAD_SCHE_SAFETY_VAL}
-DBRPC_DEBUG_LOCK=${WITH_DEBUG_LOCK_VAL}")
-if (WITH_ASAN)
- set(CMAKE_CPP_FLAGS "${CMAKE_CPP_FLAGS} -fsanitize=address")
- set(CMAKE_C_FLAGS "${CMAKE_CPP_FLAGS} -fsanitize=address")
+list(APPEND BRPC_COMMON_DEFINITIONS
+ BRPC_WITH_GLOG=${WITH_GLOG_VAL}
+ BRPC_WITH_RDMA=${WITH_RDMA_VAL}
+ BRPC_DEBUG_BTHREAD_SCHE_SAFETY=${WITH_DEBUG_BTHREAD_SCHE_SAFETY_VAL}
+ BRPC_DEBUG_LOCK=${WITH_DEBUG_LOCK_VAL}
+ BTHREAD_USE_FAST_PTHREAD_MUTEX
+ __const__=__unused__
+ _GNU_SOURCE
+ USE_SYMBOLIZE
+ NO_TCMALLOC
+ __STDC_FORMAT_MACROS
+ __STDC_LIMIT_MACROS
+ __STDC_CONSTANT_MACROS
+ __STRICT_ANSI__
+)
+if(NOT DEBUG)
+ list(APPEND BRPC_COMMON_DEFINITIONS NDEBUG)
endif()
-if(WITH_MESALINK)
- set(CMAKE_CPP_FLAGS "${CMAKE_CPP_FLAGS} -DUSE_MESALINK")
+if(WITH_ASAN)
+ list(APPEND BRPC_COMMON_COMPILE_OPTIONS -fsanitize=address)
+ list(APPEND BRPC_COMMON_LINK_OPTIONS -fsanitize=address)
endif()
-set(CMAKE_CPP_FLAGS "${CMAKE_CPP_FLAGS} -DBTHREAD_USE_FAST_PTHREAD_MUTEX
-D__const__=__unused__ -D_GNU_SOURCE -DUSE_SYMBOLIZE -DNO_TCMALLOC
-D__STDC_FORMAT_MACROS -D__STDC_LIMIT_MACROS -D__STDC_CONSTANT_MACROS
-DBRPC_REVISION=\\\"${BRPC_REVISION}\\\" -D__STRICT_ANSI__")
-set(CMAKE_CPP_FLAGS "${CMAKE_CPP_FLAGS} ${DEBUG_SYMBOL} ${THRIFT_CPP_FLAG}")
-set(CMAKE_CXX_FLAGS "${CMAKE_CPP_FLAGS} ${CMAKE_CXX_FLAGS} -O2 -pipe -Wall -W
-fPIC -fstrict-aliasing -Wno-invalid-offsetof -Wno-unused-parameter
-fno-omit-frame-pointer")
-set(CMAKE_C_FLAGS "${CMAKE_CPP_FLAGS} -O2 -pipe -Wall -W -fPIC
-fstrict-aliasing -Wno-unused-parameter -fno-omit-frame-pointer")
-
-macro(use_cxx11)
-if(CMAKE_VERSION VERSION_LESS "3.1.3")
- if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
- if(CMAKE_CXX_COMPILER_ID STREQUAL "Clang")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
-else()
- set(CMAKE_CXX_STANDARD 11)
- set(CMAKE_CXX_STANDARD_REQUIRED ON)
-endif()
-endmacro(use_cxx11)
+if(WITH_MESALINK)
+ list(APPEND BRPC_COMMON_DEFINITIONS USE_MESALINK)
+endif()
+
+list(APPEND BRPC_COMMON_COMPILE_OPTIONS
+ -O2
+ -pipe
+ -Wall
+ -W
+ -fPIC
+ -fstrict-aliasing
+ -Wno-unused-parameter
+ -fno-omit-frame-pointer
+ "-DBRPC_REVISION=\"${BRPC_REVISION}\""
+ $<$<COMPILE_LANGUAGE:CXX>:-Wno-invalid-offsetof>
+)
if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
#required by butil/crc32.cc to boost performance for 10x
if((CMAKE_SYSTEM_PROCESSOR MATCHES "(x86)|(X86)|(amd64)|(AMD64)") AND NOT
(CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.4))
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -msse4 -msse4.2")
+ list(APPEND BRPC_COMMON_COMPILE_OPTIONS
+ $<$<COMPILE_LANGUAGE:CXX>:-msse4>
+ $<$<COMPILE_LANGUAGE:CXX>:-msse4.2>
+ )
elseif((CMAKE_SYSTEM_PROCESSOR MATCHES "aarch64"))
# segmentation fault in libcontext
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fno-gcse")
+ list(APPEND BRPC_COMMON_COMPILE_OPTIONS
$<$<COMPILE_LANGUAGE:CXX>:-fno-gcse>)
elseif((CMAKE_SYSTEM_PROCESSOR MATCHES "riscv64"))
# RISC-V specific optimizations
option(WITH_RISCV_ZBC "Enable RISC-V Zbc carry-less multiplication for
CRC32C acceleration" OFF)
option(WITH_RISCV_ZVBC "Enable RISC-V Zvbc vector carry-less
multiplication for CRC32C acceleration" OFF)
if(WITH_RISCV_ZVBC)
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -march=rv64gcv_zbc_zvbc")
+ list(APPEND BRPC_COMMON_COMPILE_OPTIONS
$<$<COMPILE_LANGUAGE:CXX>:-march=rv64gcv_zbc_zvbc>)
elseif(WITH_RISCV_ZBC)
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -march=rv64gc_zbc")
+ list(APPEND BRPC_COMMON_COMPILE_OPTIONS
$<$<COMPILE_LANGUAGE:CXX>:-march=rv64gc_zbc>)
else()
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -march=rv64gc")
+ list(APPEND BRPC_COMMON_COMPILE_OPTIONS
$<$<COMPILE_LANGUAGE:CXX>:-march=rv64gc>)
endif()
endif()
if(NOT (CMAKE_CXX_COMPILER_VERSION VERSION_LESS 7.0))
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wno-aligned-new")
+ list(APPEND BRPC_COMMON_COMPILE_OPTIONS
$<$<COMPILE_LANGUAGE:CXX>:-Wno-aligned-new>)
endif()
endif()
find_package(Protobuf REQUIRED)
-if(Protobuf_VERSION GREATER 4.21)
+if(Protobuf_VERSION VERSION_GREATER 4.21)
# required by absl
- set(CMAKE_CXX_STANDARD 17)
+ set(BRPC_CXX_STANDARD 17)
find_package(absl REQUIRED CONFIG)
set(protobuf_ABSL_USED_TARGETS
@@ -231,8 +254,6 @@ if(Protobuf_VERSION GREATER 4.21)
absl::utility
absl::variant
)
-else()
- use_cxx11()
endif()
find_package(Threads REQUIRED)
@@ -248,7 +269,7 @@ if(WITH_SNAPPY)
if ((NOT SNAPPY_INCLUDE_PATH) OR (NOT SNAPPY_LIB))
message(FATAL_ERROR "Fail to find snappy")
endif()
- include_directories(${SNAPPY_INCLUDE_PATH})
+ list(APPEND BRPC_COMMON_INCLUDE_DIRS ${SNAPPY_INCLUDE_PATH})
endif()
if(WITH_GLOG)
@@ -257,7 +278,7 @@ if(WITH_GLOG)
if((NOT GLOG_INCLUDE_PATH) OR (NOT GLOG_LIB))
message(FATAL_ERROR "Fail to find glog")
endif()
- include_directories(${GLOG_INCLUDE_PATH})
+ list(APPEND BRPC_COMMON_INCLUDE_DIRS ${GLOG_INCLUDE_PATH})
endif()
if(WITH_MESALINK)
@@ -268,7 +289,7 @@ if(WITH_MESALINK)
else()
message(STATUS "Found MesaLink: ${MESALINK_LIB}")
endif()
- include_directories(${MESALINK_INCLUDE_PATH})
+ list(APPEND BRPC_COMMON_INCLUDE_DIRS ${MESALINK_INCLUDE_PATH})
endif()
if(WITH_RDMA)
@@ -278,6 +299,7 @@ if(WITH_RDMA)
if((NOT RDMA_INCLUDE_PATH) OR (NOT RDMA_LIB))
message(FATAL_ERROR "Fail to find ibverbs")
endif()
+ list(APPEND BRPC_COMMON_INCLUDE_DIRS ${RDMA_INCLUDE_PATH})
endif()
find_library(PROTOC_LIB NAMES protoc)
@@ -287,7 +309,7 @@ endif()
if(WITH_BORINGSSL)
find_package(BoringSSL)
- include_directories(${BORINGSSL_INCLUDE_DIR})
+ list(APPEND BRPC_COMMON_INCLUDE_DIRS ${BORINGSSL_INCLUDE_DIR})
else()
if(CMAKE_SYSTEM_NAME STREQUAL "Darwin" AND NOT OPENSSL_ROOT_DIR)
set(OPENSSL_ROOT_DIR
@@ -295,15 +317,15 @@ else()
)
endif()
- find_package(OpenSSL)
- include_directories(${OPENSSL_INCLUDE_DIR})
+ find_package(OpenSSL REQUIRED)
+ list(APPEND BRPC_COMMON_INCLUDE_DIRS ${OPENSSL_INCLUDE_DIR})
endif()
-include_directories(
- ${GFLAGS_INCLUDE_PATH}
- ${PROTOBUF_INCLUDE_DIRS}
- ${LEVELDB_INCLUDE_PATH}
- )
+list(APPEND BRPC_COMMON_INCLUDE_DIRS
+ ${GFLAGS_INCLUDE_PATH}
+ ${PROTOBUF_INCLUDE_DIRS}
+ ${LEVELDB_INCLUDE_PATH}
+)
set(DYNAMIC_LIB
${GFLAGS_LIBRARY}
@@ -370,6 +392,17 @@ elseif(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
)
endif()
+list(REMOVE_DUPLICATES BRPC_COMMON_INCLUDE_DIRS)
+
+add_library(brpc_common_config INTERFACE)
+target_include_directories(brpc_common_config INTERFACE
${BRPC_COMMON_INCLUDE_DIRS})
+target_compile_definitions(brpc_common_config INTERFACE
${BRPC_COMMON_DEFINITIONS})
+target_compile_options(brpc_common_config INTERFACE
${BRPC_COMMON_COMPILE_OPTIONS})
+target_compile_features(brpc_common_config INTERFACE
cxx_std_${BRPC_CXX_STANDARD})
+if(BRPC_COMMON_LINK_OPTIONS)
+ target_link_options(brpc_common_config INTERFACE
${BRPC_COMMON_LINK_OPTIONS})
+endif()
+
# for *.so
set(CMAKE_LIBRARY_OUTPUT_DIRECTORY ${PROJECT_BINARY_DIR}/output/lib)
# for *.a
@@ -512,12 +545,12 @@ elseif(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
${PROJECT_SOURCE_DIR}/src/butil/mac/scoped_mach_port.cc)
endif()
-file(GLOB_RECURSE BVAR_SOURCES "${PROJECT_SOURCE_DIR}/src/bvar/*.cpp")
-file(GLOB_RECURSE BTHREAD_SOURCES "${PROJECT_SOURCE_DIR}/src/bthread/*.cpp")
-file(GLOB_RECURSE JSON2PB_SOURCES "${PROJECT_SOURCE_DIR}/src/json2pb/*.cpp")
-file(GLOB_RECURSE BRPC_SOURCES "${PROJECT_SOURCE_DIR}/src/brpc/*.cpp")
-file(GLOB_RECURSE THRIFT_SOURCES "${PROJECT_SOURCE_DIR}/src/brpc/thrift*.cpp")
-file(GLOB_RECURSE EXCLUDE_SOURCES
"${PROJECT_SOURCE_DIR}/src/brpc/event_dispatcher_*.cpp")
+file(GLOB_RECURSE BVAR_SOURCES CONFIGURE_DEPENDS
"${PROJECT_SOURCE_DIR}/src/bvar/*.cpp")
+file(GLOB_RECURSE BTHREAD_SOURCES CONFIGURE_DEPENDS
"${PROJECT_SOURCE_DIR}/src/bthread/*.cpp")
+file(GLOB_RECURSE JSON2PB_SOURCES CONFIGURE_DEPENDS
"${PROJECT_SOURCE_DIR}/src/json2pb/*.cpp")
+file(GLOB_RECURSE BRPC_SOURCES CONFIGURE_DEPENDS
"${PROJECT_SOURCE_DIR}/src/brpc/*.cpp")
+file(GLOB_RECURSE THRIFT_SOURCES CONFIGURE_DEPENDS
"${PROJECT_SOURCE_DIR}/src/brpc/thrift*.cpp")
+file(GLOB_RECURSE EXCLUDE_SOURCES CONFIGURE_DEPENDS
"${PROJECT_SOURCE_DIR}/src/brpc/event_dispatcher_*.cpp")
if(WITH_THRIFT)
message("brpc compile with thrift protocol")
@@ -567,6 +600,7 @@ compile_proto(PROTO_HDRS PROTO_SRCS ${PROJECT_BINARY_DIR}
${PROJECT_SOURCE_DIR}/src
"${PROTO_FILES}")
add_library(PROTO_LIB OBJECT ${PROTO_SRCS} ${PROTO_HDRS})
+target_link_libraries(PROTO_LIB PRIVATE brpc_common_config)
set(SOURCES
${BVAR_SOURCES}
@@ -617,4 +651,4 @@ install(DIRECTORY
${CMAKE_CURRENT_BINARY_DIR}/output/include/
# Install pkgconfig
configure_file(cmake/brpc.pc.in ${PROJECT_BINARY_DIR}/brpc.pc @ONLY)
-install(FILES ${PROJECT_BINARY_DIR}/brpc.pc DESTINATION
${CMAKE_INSTALL_LIBDIR}/pkgconfig)
\ No newline at end of file
+install(FILES ${PROJECT_BINARY_DIR}/brpc.pc DESTINATION
${CMAKE_INSTALL_LIBDIR}/pkgconfig)
diff --git a/cmake/CMakeLists.download_gtest.in
b/cmake/CMakeLists.download_gtest.in
index 78d99baf..03ad5c8b 100644
--- a/cmake/CMakeLists.download_gtest.in
+++ b/cmake/CMakeLists.download_gtest.in
@@ -13,7 +13,7 @@
# See the License for the specific language governing permissions and
# limitations under the License.
-cmake_minimum_required(VERSION 2.8.12)
+cmake_minimum_required(VERSION 3.16...3.28)
project(googletest-download NONE)
diff --git a/example/asynchronous_echo_c++/CMakeLists.txt
b/example/asynchronous_echo_c++/CMakeLists.txt
index 37cb5f38..e2d8f1e9 100644
--- a/example/asynchronous_echo_c++/CMakeLists.txt
+++ b/example/asynchronous_echo_c++/CMakeLists.txt
@@ -15,9 +15,11 @@
# specific language governing permissions and limitations
# under the License.
-cmake_minimum_required(VERSION 2.8.10)
+cmake_minimum_required(VERSION 3.16...3.28)
project(asynchronous_echo_c++ C CXX)
+include(${CMAKE_CURRENT_LIST_DIR}/../cmake/BrpcExample.cmake)
+
option(LINK_SO "Whether examples are linked dynamically" OFF)
execute_process(
@@ -25,13 +27,13 @@ execute_process(
OUTPUT_VARIABLE OUTPUT_PATH
)
-set(CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+if(OUTPUT_PATH)
+ list(PREPEND CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+endif()
-include(FindThreads)
-include(FindProtobuf)
+find_package(Threads REQUIRED)
+find_package(Protobuf REQUIRED)
protobuf_generate_cpp(PROTO_SRC PROTO_HEADER echo.proto)
-# include PROTO_HEADER
-include_directories(${CMAKE_CURRENT_BINARY_DIR})
# Search for libthrift* by best effort. If it is not found and brpc is
# compiled with thrift protocol enabled, a link error would be reported.
@@ -49,55 +51,29 @@ endif()
if((NOT BRPC_INCLUDE_PATH) OR (NOT BRPC_LIB))
message(FATAL_ERROR "Fail to find brpc")
endif()
-include_directories(${BRPC_INCLUDE_PATH})
find_path(GFLAGS_INCLUDE_PATH gflags/gflags.h)
find_library(GFLAGS_LIBRARY NAMES gflags libgflags)
if((NOT GFLAGS_INCLUDE_PATH) OR (NOT GFLAGS_LIBRARY))
message(FATAL_ERROR "Fail to find gflags")
endif()
-include_directories(${GFLAGS_INCLUDE_PATH})
-
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
- include(CheckFunctionExists)
- CHECK_FUNCTION_EXISTS(clock_gettime HAVE_CLOCK_GETTIME)
- if(NOT HAVE_CLOCK_GETTIME)
- set(DEFINE_CLOCK_GETTIME "-DNO_CLOCK_GETTIME_IN_MAC")
- endif()
-endif()
-
-set(CMAKE_CXX_FLAGS "${DEFINE_CLOCK_GETTIME} -DNDEBUG -O2
-D__const__=__unused__ -pipe -W -Wall -Wno-unused-parameter -fPIC
-fno-omit-frame-pointer")
-
-if(CMAKE_VERSION VERSION_LESS "3.1.3")
- if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
- if(CMAKE_CXX_COMPILER_ID STREQUAL "Clang")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
-else()
- set(CMAKE_CXX_STANDARD 11)
- set(CMAKE_CXX_STANDARD_REQUIRED ON)
-endif()
find_path(LEVELDB_INCLUDE_PATH NAMES leveldb/db.h)
find_library(LEVELDB_LIB NAMES leveldb)
if ((NOT LEVELDB_INCLUDE_PATH) OR (NOT LEVELDB_LIB))
message(FATAL_ERROR "Fail to find leveldb")
endif()
-include_directories(${LEVELDB_INCLUDE_PATH})
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
+if(CMAKE_SYSTEM_NAME STREQUAL "Darwin" AND NOT OPENSSL_ROOT_DIR)
set(OPENSSL_ROOT_DIR
"/usr/local/opt/openssl" # Homebrew installed OpenSSL
)
endif()
-find_package(OpenSSL)
-include_directories(${OPENSSL_INCLUDE_DIR})
+find_package(OpenSSL REQUIRED)
set(DYNAMIC_LIB
- ${CMAKE_THREAD_LIBS_INIT}
+ Threads::Threads
${GFLAGS_LIBRARY}
${PROTOBUF_LIBRARIES}
${LEVELDB_LIB}
@@ -126,7 +102,9 @@ if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
endif()
add_executable(asynchronous_echo_client client.cpp ${PROTO_SRC})
+brpc_example_configure_target(asynchronous_echo_client)
add_executable(asynchronous_echo_server server.cpp ${PROTO_SRC})
+brpc_example_configure_target(asynchronous_echo_server)
-target_link_libraries(asynchronous_echo_client ${BRPC_LIB} ${DYNAMIC_LIB})
-target_link_libraries(asynchronous_echo_server ${BRPC_LIB} ${DYNAMIC_LIB})
+target_link_libraries(asynchronous_echo_client PRIVATE ${BRPC_LIB}
${DYNAMIC_LIB})
+target_link_libraries(asynchronous_echo_server PRIVATE ${BRPC_LIB}
${DYNAMIC_LIB})
diff --git a/example/auto_concurrency_limiter/CMakeLists.txt
b/example/auto_concurrency_limiter/CMakeLists.txt
index a496dd57..45636126 100644
--- a/example/auto_concurrency_limiter/CMakeLists.txt
+++ b/example/auto_concurrency_limiter/CMakeLists.txt
@@ -15,9 +15,11 @@
# specific language governing permissions and limitations
# under the License.
-cmake_minimum_required(VERSION 2.8.10)
+cmake_minimum_required(VERSION 3.16...3.28)
project(asynchronous_echo_c++ C CXX)
+include(${CMAKE_CURRENT_LIST_DIR}/../cmake/BrpcExample.cmake)
+
option(LINK_SO "Whether examples are linked dynamically" OFF)
execute_process(
@@ -25,13 +27,13 @@ execute_process(
OUTPUT_VARIABLE OUTPUT_PATH
)
-set(CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+if(OUTPUT_PATH)
+ list(PREPEND CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+endif()
-include(FindThreads)
-include(FindProtobuf)
+find_package(Threads REQUIRED)
+find_package(Protobuf REQUIRED)
protobuf_generate_cpp(PROTO_SRC PROTO_HEADER cl_test.proto)
-# include PROTO_HEADER
-include_directories(${CMAKE_CURRENT_BINARY_DIR})
find_path(BRPC_INCLUDE_PATH NAMES brpc/server.h)
if(LINK_SO)
@@ -42,55 +44,29 @@ endif()
if((NOT BRPC_INCLUDE_PATH) OR (NOT BRPC_LIB))
message(FATAL_ERROR "Fail to find brpc")
endif()
-include_directories(${BRPC_INCLUDE_PATH})
find_path(GFLAGS_INCLUDE_PATH gflags/gflags.h)
find_library(GFLAGS_LIBRARY NAMES gflags libgflags)
if((NOT GFLAGS_INCLUDE_PATH) OR (NOT GFLAGS_LIBRARY))
message(FATAL_ERROR "Fail to find gflags")
endif()
-include_directories(${GFLAGS_INCLUDE_PATH})
-
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
- include(CheckFunctionExists)
- CHECK_FUNCTION_EXISTS(clock_gettime HAVE_CLOCK_GETTIME)
- if(NOT HAVE_CLOCK_GETTIME)
- set(DEFINE_CLOCK_GETTIME "-DNO_CLOCK_GETTIME_IN_MAC")
- endif()
-endif()
-
-set(CMAKE_CXX_FLAGS "${DEFINE_CLOCK_GETTIME} -DNDEBUG -O2
-D__const__=__unused__ -pipe -W -Wall -Wno-unused-parameter -fPIC
-fno-omit-frame-pointer")
-
-if(CMAKE_VERSION VERSION_LESS "3.1.3")
- if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
- if(CMAKE_CXX_COMPILER_ID STREQUAL "Clang")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
-else()
- set(CMAKE_CXX_STANDARD 11)
- set(CMAKE_CXX_STANDARD_REQUIRED ON)
-endif()
find_path(LEVELDB_INCLUDE_PATH NAMES leveldb/db.h)
find_library(LEVELDB_LIB NAMES leveldb)
if ((NOT LEVELDB_INCLUDE_PATH) OR (NOT LEVELDB_LIB))
message(FATAL_ERROR "Fail to find leveldb")
endif()
-include_directories(${LEVELDB_INCLUDE_PATH})
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
+if(CMAKE_SYSTEM_NAME STREQUAL "Darwin" AND NOT OPENSSL_ROOT_DIR)
set(OPENSSL_ROOT_DIR
"/usr/local/opt/openssl" # Homebrew installed OpenSSL
)
endif()
-find_package(OpenSSL)
-include_directories(${OPENSSL_INCLUDE_DIR})
+find_package(OpenSSL REQUIRED)
set(DYNAMIC_LIB
- ${CMAKE_THREAD_LIBS_INIT}
+ Threads::Threads
${GFLAGS_LIBRARY}
${PROTOBUF_LIBRARIES}
${LEVELDB_LIB}
@@ -120,7 +96,9 @@ if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
endif()
add_executable(asynchronous_echo_client client.cpp ${PROTO_SRC})
+brpc_example_configure_target(asynchronous_echo_client)
add_executable(asynchronous_echo_server server.cpp ${PROTO_SRC})
+brpc_example_configure_target(asynchronous_echo_server)
-target_link_libraries(asynchronous_echo_client ${BRPC_LIB} ${DYNAMIC_LIB})
-target_link_libraries(asynchronous_echo_server ${BRPC_LIB} ${DYNAMIC_LIB})
+target_link_libraries(asynchronous_echo_client PRIVATE ${BRPC_LIB}
${DYNAMIC_LIB})
+target_link_libraries(asynchronous_echo_server PRIVATE ${BRPC_LIB}
${DYNAMIC_LIB})
diff --git a/example/backup_request_c++/CMakeLists.txt
b/example/backup_request_c++/CMakeLists.txt
index 3c8d34a0..5de9b583 100644
--- a/example/backup_request_c++/CMakeLists.txt
+++ b/example/backup_request_c++/CMakeLists.txt
@@ -15,9 +15,11 @@
# specific language governing permissions and limitations
# under the License.
-cmake_minimum_required(VERSION 2.8.10)
+cmake_minimum_required(VERSION 3.16...3.28)
project(backup_request_c++ C CXX)
+include(${CMAKE_CURRENT_LIST_DIR}/../cmake/BrpcExample.cmake)
+
option(LINK_SO "Whether examples are linked dynamically" OFF)
execute_process(
@@ -25,13 +27,13 @@ execute_process(
OUTPUT_VARIABLE OUTPUT_PATH
)
-set(CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+if(OUTPUT_PATH)
+ list(PREPEND CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+endif()
-include(FindThreads)
-include(FindProtobuf)
+find_package(Threads REQUIRED)
+find_package(Protobuf REQUIRED)
protobuf_generate_cpp(PROTO_SRC PROTO_HEADER echo.proto)
-# include PROTO_HEADER
-include_directories(${CMAKE_CURRENT_BINARY_DIR})
# Search for libthrift* by best effort. If it is not found and brpc is
# compiled with thrift protocol enabled, a link error would be reported.
@@ -49,55 +51,29 @@ endif()
if((NOT BRPC_INCLUDE_PATH) OR (NOT BRPC_LIB))
message(FATAL_ERROR "Fail to find brpc")
endif()
-include_directories(${BRPC_INCLUDE_PATH})
find_path(GFLAGS_INCLUDE_PATH gflags/gflags.h)
find_library(GFLAGS_LIBRARY NAMES gflags libgflags)
if((NOT GFLAGS_INCLUDE_PATH) OR (NOT GFLAGS_LIBRARY))
message(FATAL_ERROR "Fail to find gflags")
endif()
-include_directories(${GFLAGS_INCLUDE_PATH})
-
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
- include(CheckFunctionExists)
- CHECK_FUNCTION_EXISTS(clock_gettime HAVE_CLOCK_GETTIME)
- if(NOT HAVE_CLOCK_GETTIME)
- set(DEFINE_CLOCK_GETTIME "-DNO_CLOCK_GETTIME_IN_MAC")
- endif()
-endif()
-
-set(CMAKE_CXX_FLAGS "${DEFINE_CLOCK_GETTIME} -DNDEBUG -O2
-D__const__=__unused__ -pipe -W -Wall -Wno-unused-parameter -fPIC
-fno-omit-frame-pointer")
-
-if(CMAKE_VERSION VERSION_LESS "3.1.3")
- if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
- if(CMAKE_CXX_COMPILER_ID STREQUAL "Clang")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
-else()
- set(CMAKE_CXX_STANDARD 11)
- set(CMAKE_CXX_STANDARD_REQUIRED ON)
-endif()
find_path(LEVELDB_INCLUDE_PATH NAMES leveldb/db.h)
find_library(LEVELDB_LIB NAMES leveldb)
if ((NOT LEVELDB_INCLUDE_PATH) OR (NOT LEVELDB_LIB))
message(FATAL_ERROR "Fail to find leveldb")
endif()
-include_directories(${LEVELDB_INCLUDE_PATH})
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
+if(CMAKE_SYSTEM_NAME STREQUAL "Darwin" AND NOT OPENSSL_ROOT_DIR)
set(OPENSSL_ROOT_DIR
"/usr/local/opt/openssl" # Homebrew installed OpenSSL
)
endif()
-find_package(OpenSSL)
-include_directories(${OPENSSL_INCLUDE_DIR})
+find_package(OpenSSL REQUIRED)
set(DYNAMIC_LIB
- ${CMAKE_THREAD_LIBS_INIT}
+ Threads::Threads
${GFLAGS_LIBRARY}
${PROTOBUF_LIBRARIES}
${LEVELDB_LIB}
@@ -126,7 +102,9 @@ if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
endif()
add_executable(backup_request_client client.cpp ${PROTO_SRC} ${PROTO_HEADER})
+brpc_example_configure_target(backup_request_client)
add_executable(backup_request_server server.cpp ${PROTO_SRC} ${PROTO_HEADER})
+brpc_example_configure_target(backup_request_server)
-target_link_libraries(backup_request_client ${BRPC_LIB} ${DYNAMIC_LIB})
-target_link_libraries(backup_request_server ${BRPC_LIB} ${DYNAMIC_LIB})
+target_link_libraries(backup_request_client PRIVATE ${BRPC_LIB} ${DYNAMIC_LIB})
+target_link_libraries(backup_request_server PRIVATE ${BRPC_LIB} ${DYNAMIC_LIB})
diff --git a/example/baidu_proxy_and_generic_call/CMakeLists.txt
b/example/baidu_proxy_and_generic_call/CMakeLists.txt
index 7e34d0a8..bd3da92e 100644
--- a/example/baidu_proxy_and_generic_call/CMakeLists.txt
+++ b/example/baidu_proxy_and_generic_call/CMakeLists.txt
@@ -15,9 +15,11 @@
# specific language governing permissions and limitations
# under the License.
-cmake_minimum_required(VERSION 2.8.10)
+cmake_minimum_required(VERSION 3.16...3.28)
project(baidu_proxy_and_generic_call C CXX)
+include(${CMAKE_CURRENT_LIST_DIR}/../cmake/BrpcExample.cmake)
+
option(LINK_SO "Whether examples are linked dynamically" OFF)
execute_process(
@@ -25,13 +27,13 @@ execute_process(
OUTPUT_VARIABLE OUTPUT_PATH
)
-set(CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+if(OUTPUT_PATH)
+ list(PREPEND CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+endif()
-include(FindThreads)
-include(FindProtobuf)
+find_package(Threads REQUIRED)
+find_package(Protobuf REQUIRED)
protobuf_generate_cpp(PROTO_SRC PROTO_HEADER echo.proto)
-# include PROTO_HEADER
-include_directories(${CMAKE_CURRENT_BINARY_DIR})
find_path(BRPC_INCLUDE_PATH NAMES brpc/server.h)
if(LINK_SO)
@@ -42,55 +44,29 @@ endif()
if((NOT BRPC_INCLUDE_PATH) OR (NOT BRPC_LIB))
message(FATAL_ERROR "Fail to find brpc")
endif()
-include_directories(${BRPC_INCLUDE_PATH})
find_path(GFLAGS_INCLUDE_PATH gflags/gflags.h)
find_library(GFLAGS_LIBRARY NAMES gflags libgflags)
if((NOT GFLAGS_INCLUDE_PATH) OR (NOT GFLAGS_LIBRARY))
message(FATAL_ERROR "Fail to find gflags")
endif()
-include_directories(${GFLAGS_INCLUDE_PATH})
-
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
- include(CheckFunctionExists)
- CHECK_FUNCTION_EXISTS(clock_gettime HAVE_CLOCK_GETTIME)
- if(NOT HAVE_CLOCK_GETTIME)
- set(DEFINE_CLOCK_GETTIME "-DNO_CLOCK_GETTIME_IN_MAC")
- endif()
-endif()
-
-set(CMAKE_CXX_FLAGS "${DEFINE_CLOCK_GETTIME} -DNDEBUG -O2
-D__const__=__unused__ -pipe -W -Wall -Wno-unused-parameter -fPIC
-fno-omit-frame-pointer")
-
-if(CMAKE_VERSION VERSION_LESS "3.1.3")
- if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
- if(CMAKE_CXX_COMPILER_ID STREQUAL "Clang")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
-else()
- set(CMAKE_CXX_STANDARD 11)
- set(CMAKE_CXX_STANDARD_REQUIRED ON)
-endif()
find_path(LEVELDB_INCLUDE_PATH NAMES leveldb/db.h)
find_library(LEVELDB_LIB NAMES leveldb)
if ((NOT LEVELDB_INCLUDE_PATH) OR (NOT LEVELDB_LIB))
message(FATAL_ERROR "Fail to find leveldb")
endif()
-include_directories(${LEVELDB_INCLUDE_PATH})
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
+if(CMAKE_SYSTEM_NAME STREQUAL "Darwin" AND NOT OPENSSL_ROOT_DIR)
set(OPENSSL_ROOT_DIR
"/usr/local/opt/openssl" # Homebrew installed OpenSSL
)
endif()
-find_package(OpenSSL)
-include_directories(${OPENSSL_INCLUDE_DIR})
+find_package(OpenSSL REQUIRED)
set(DYNAMIC_LIB
- ${CMAKE_THREAD_LIBS_INIT}
+ Threads::Threads
${GFLAGS_LIBRARY}
${PROTOBUF_LIBRARIES}
${LEVELDB_LIB}
@@ -118,9 +94,12 @@ if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
endif()
add_executable(echo_client client.cpp ${PROTO_SRC} ${PROTO_HEADER})
+brpc_example_configure_target(echo_client)
add_executable(proxy proxy.cpp)
+brpc_example_configure_target(proxy)
add_executable(echo_server server.cpp ${PROTO_SRC} ${PROTO_HEADER})
+brpc_example_configure_target(echo_server)
-target_link_libraries(echo_client ${BRPC_LIB} ${DYNAMIC_LIB})
-target_link_libraries(proxy ${BRPC_LIB} ${DYNAMIC_LIB})
-target_link_libraries(echo_server ${BRPC_LIB} ${DYNAMIC_LIB})
+target_link_libraries(echo_client PRIVATE ${BRPC_LIB} ${DYNAMIC_LIB})
+target_link_libraries(proxy PRIVATE ${BRPC_LIB} ${DYNAMIC_LIB})
+target_link_libraries(echo_server PRIVATE ${BRPC_LIB} ${DYNAMIC_LIB})
diff --git a/example/bthread_tag_echo_c++/CMakeLists.txt
b/example/bthread_tag_echo_c++/CMakeLists.txt
index d91aa6ca..7543a6a6 100644
--- a/example/bthread_tag_echo_c++/CMakeLists.txt
+++ b/example/bthread_tag_echo_c++/CMakeLists.txt
@@ -15,9 +15,11 @@
# specific language governing permissions and limitations
# under the License.
-cmake_minimum_required(VERSION 2.8.10)
+cmake_minimum_required(VERSION 3.16...3.28)
project(bthread_tag_echo_c++ C CXX)
+include(${CMAKE_CURRENT_LIST_DIR}/../cmake/BrpcExample.cmake)
+
option(LINK_SO "Whether examples are linked dynamically" OFF)
execute_process(
@@ -25,13 +27,13 @@ execute_process(
OUTPUT_VARIABLE OUTPUT_PATH
)
-set(CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+if(OUTPUT_PATH)
+ list(PREPEND CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+endif()
-include(FindThreads)
-include(FindProtobuf)
+find_package(Threads REQUIRED)
+find_package(Protobuf REQUIRED)
protobuf_generate_cpp(PROTO_SRC PROTO_HEADER echo.proto)
-# include PROTO_HEADER
-include_directories(${CMAKE_CURRENT_BINARY_DIR})
# Search for libthrift* by best effort. If it is not found and brpc is
# compiled with thrift protocol enabled, a link error would be reported.
@@ -42,7 +44,6 @@ endif()
find_path(GPERFTOOLS_INCLUDE_DIR NAMES gperftools/heap-profiler.h)
find_library(GPERFTOOLS_LIBRARIES NAMES tcmalloc_and_profiler)
-include_directories(${GPERFTOOLS_INCLUDE_DIR})
find_path(BRPC_INCLUDE_PATH NAMES brpc/server.h)
if(LINK_SO)
@@ -53,57 +54,31 @@ endif()
if((NOT BRPC_INCLUDE_PATH) OR (NOT BRPC_LIB))
message(FATAL_ERROR "Fail to find brpc")
endif()
-include_directories(${BRPC_INCLUDE_PATH})
find_path(GFLAGS_INCLUDE_PATH gflags/gflags.h)
find_library(GFLAGS_LIBRARY NAMES gflags libgflags)
if((NOT GFLAGS_INCLUDE_PATH) OR (NOT GFLAGS_LIBRARY))
message(FATAL_ERROR "Fail to find gflags")
endif()
-include_directories(${GFLAGS_INCLUDE_PATH})
-
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
- include(CheckFunctionExists)
- CHECK_FUNCTION_EXISTS(clock_gettime HAVE_CLOCK_GETTIME)
- if(NOT HAVE_CLOCK_GETTIME)
- set(DEFINE_CLOCK_GETTIME "-DNO_CLOCK_GETTIME_IN_MAC")
- endif()
-endif()
-set(CMAKE_CXX_FLAGS "${DEFINE_CLOCK_GETTIME} -DNDEBUG -O2
-D__const__=__unused__ -pipe -W -Wall -Wno-unused-parameter -fPIC
-fno-omit-frame-pointer")
-set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -DBRPC_ENABLE_CPU_PROFILER")
-
-if(CMAKE_VERSION VERSION_LESS "3.1.3")
- if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
- if(CMAKE_CXX_COMPILER_ID STREQUAL "Clang")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
-else()
- set(CMAKE_CXX_STANDARD 11)
- set(CMAKE_CXX_STANDARD_REQUIRED ON)
-endif()
+set(BRPC_EXAMPLE_ENABLE_CPU_PROFILER ON)
find_path(LEVELDB_INCLUDE_PATH NAMES leveldb/db.h)
find_library(LEVELDB_LIB NAMES leveldb)
if ((NOT LEVELDB_INCLUDE_PATH) OR (NOT LEVELDB_LIB))
message(FATAL_ERROR "Fail to find leveldb")
endif()
-include_directories(${LEVELDB_INCLUDE_PATH})
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
+if(CMAKE_SYSTEM_NAME STREQUAL "Darwin" AND NOT OPENSSL_ROOT_DIR)
set(OPENSSL_ROOT_DIR
"/usr/local/opt/openssl" # Homebrew installed OpenSSL
)
endif()
-find_package(OpenSSL)
-include_directories(${OPENSSL_INCLUDE_DIR})
-
+find_package(OpenSSL REQUIRED)
set(DYNAMIC_LIB
- ${CMAKE_THREAD_LIBS_INIT}
+ Threads::Threads
${GFLAGS_LIBRARY}
${PROTOBUF_LIBRARIES}
${LEVELDB_LIB}
@@ -132,7 +107,9 @@ if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
endif()
add_executable(echo_client client.cpp ${PROTO_SRC} ${PROTO_HEADER})
+brpc_example_configure_target(echo_client)
add_executable(echo_server server.cpp ${PROTO_SRC} ${PROTO_HEADER})
+brpc_example_configure_target(echo_server)
-target_link_libraries(echo_client ${BRPC_LIB} ${DYNAMIC_LIB}
${GPERFTOOLS_LIBRARIES})
-target_link_libraries(echo_server ${BRPC_LIB} ${DYNAMIC_LIB}
${GPERFTOOLS_LIBRARIES})
+target_link_libraries(echo_client PRIVATE ${BRPC_LIB} ${DYNAMIC_LIB}
${GPERFTOOLS_LIBRARIES})
+target_link_libraries(echo_server PRIVATE ${BRPC_LIB} ${DYNAMIC_LIB}
${GPERFTOOLS_LIBRARIES})
diff --git a/example/cancel_c++/CMakeLists.txt
b/example/cancel_c++/CMakeLists.txt
index b8d64dda..3dc198f0 100644
--- a/example/cancel_c++/CMakeLists.txt
+++ b/example/cancel_c++/CMakeLists.txt
@@ -15,9 +15,11 @@
# specific language governing permissions and limitations
# under the License.
-cmake_minimum_required(VERSION 2.8.10)
+cmake_minimum_required(VERSION 3.16...3.28)
project(cancel_c++ C CXX)
+include(${CMAKE_CURRENT_LIST_DIR}/../cmake/BrpcExample.cmake)
+
option(LINK_SO "Whether examples are linked dynamically" OFF)
execute_process(
@@ -25,13 +27,13 @@ execute_process(
OUTPUT_VARIABLE OUTPUT_PATH
)
-set(CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+if(OUTPUT_PATH)
+ list(PREPEND CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+endif()
-include(FindThreads)
-include(FindProtobuf)
+find_package(Threads REQUIRED)
+find_package(Protobuf REQUIRED)
protobuf_generate_cpp(PROTO_SRC PROTO_HEADER echo.proto)
-# include PROTO_HEADER
-include_directories(${CMAKE_CURRENT_BINARY_DIR})
# Search for libthrift* by best effort. If it is not found and brpc is
# compiled with thrift protocol enabled, a link error would be reported.
@@ -49,55 +51,29 @@ endif()
if((NOT BRPC_INCLUDE_PATH) OR (NOT BRPC_LIB))
message(FATAL_ERROR "Fail to find brpc")
endif()
-include_directories(${BRPC_INCLUDE_PATH})
find_path(GFLAGS_INCLUDE_PATH gflags/gflags.h)
find_library(GFLAGS_LIBRARY NAMES gflags libgflags)
if((NOT GFLAGS_INCLUDE_PATH) OR (NOT GFLAGS_LIBRARY))
message(FATAL_ERROR "Fail to find gflags")
endif()
-include_directories(${GFLAGS_INCLUDE_PATH})
-
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
- include(CheckFunctionExists)
- CHECK_FUNCTION_EXISTS(clock_gettime HAVE_CLOCK_GETTIME)
- if(NOT HAVE_CLOCK_GETTIME)
- set(DEFINE_CLOCK_GETTIME "-DNO_CLOCK_GETTIME_IN_MAC")
- endif()
-endif()
-
-set(CMAKE_CXX_FLAGS "${DEFINE_CLOCK_GETTIME} -DNDEBUG -O2
-D__const__=__unused__ -pipe -W -Wall -Wno-unused-parameter -fPIC
-fno-omit-frame-pointer")
-
-if(CMAKE_VERSION VERSION_LESS "3.1.3")
- if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
- if(CMAKE_CXX_COMPILER_ID STREQUAL "Clang")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
-else()
- set(CMAKE_CXX_STANDARD 11)
- set(CMAKE_CXX_STANDARD_REQUIRED ON)
-endif()
find_path(LEVELDB_INCLUDE_PATH NAMES leveldb/db.h)
find_library(LEVELDB_LIB NAMES leveldb)
if ((NOT LEVELDB_INCLUDE_PATH) OR (NOT LEVELDB_LIB))
message(FATAL_ERROR "Fail to find leveldb")
endif()
-include_directories(${LEVELDB_INCLUDE_PATH})
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
+if(CMAKE_SYSTEM_NAME STREQUAL "Darwin" AND NOT OPENSSL_ROOT_DIR)
set(OPENSSL_ROOT_DIR
"/usr/local/opt/openssl" # Homebrew installed OpenSSL
)
endif()
-find_package(OpenSSL)
-include_directories(${OPENSSL_INCLUDE_DIR})
+find_package(OpenSSL REQUIRED)
set(DYNAMIC_LIB
- ${CMAKE_THREAD_LIBS_INIT}
+ Threads::Threads
${GFLAGS_LIBRARY}
${PROTOBUF_LIBRARIES}
${LEVELDB_LIB}
@@ -126,7 +102,9 @@ if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
endif()
add_executable(cancel_client client.cpp ${PROTO_SRC} ${PROTO_HEADER})
+brpc_example_configure_target(cancel_client)
add_executable(cancel_server server.cpp ${PROTO_SRC} ${PROTO_HEADER})
+brpc_example_configure_target(cancel_server)
-target_link_libraries(cancel_client ${BRPC_LIB} ${DYNAMIC_LIB})
-target_link_libraries(cancel_server ${BRPC_LIB} ${DYNAMIC_LIB})
+target_link_libraries(cancel_client PRIVATE ${BRPC_LIB} ${DYNAMIC_LIB})
+target_link_libraries(cancel_server PRIVATE ${BRPC_LIB} ${DYNAMIC_LIB})
diff --git a/example/cascade_echo_c++/CMakeLists.txt
b/example/cascade_echo_c++/CMakeLists.txt
index 453067b1..4e9a0d60 100644
--- a/example/cascade_echo_c++/CMakeLists.txt
+++ b/example/cascade_echo_c++/CMakeLists.txt
@@ -15,9 +15,11 @@
# specific language governing permissions and limitations
# under the License.
-cmake_minimum_required(VERSION 2.8.10)
+cmake_minimum_required(VERSION 3.16...3.28)
project(cascade_echo_c++ C CXX)
+include(${CMAKE_CURRENT_LIST_DIR}/../cmake/BrpcExample.cmake)
+
option(LINK_SO "Whether examples are linked dynamically" OFF)
execute_process(
@@ -25,12 +27,12 @@ execute_process(
OUTPUT_VARIABLE OUTPUT_PATH
)
-set(CMAKE_PREFIX_PATH ${OUTPUT_PATH})
-include(FindThreads)
-include(FindProtobuf)
+if(OUTPUT_PATH)
+ list(PREPEND CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+endif()
+find_package(Threads REQUIRED)
+find_package(Protobuf REQUIRED)
protobuf_generate_cpp(PROTO_SRC PROTO_HEADER echo.proto)
-# include PROTO_HEADER
-include_directories(${CMAKE_CURRENT_BINARY_DIR})
# Search for libthrift* by best effort. If it is not found and brpc is
# compiled with thrift protocol enabled, a link error would be reported.
@@ -48,55 +50,29 @@ endif()
if((NOT BRPC_INCLUDE_PATH) OR (NOT BRPC_LIB))
message(FATAL_ERROR "Fail to find brpc")
endif()
-include_directories(${BRPC_INCLUDE_PATH})
find_path(GFLAGS_INCLUDE_PATH gflags/gflags.h)
find_library(GFLAGS_LIBRARY NAMES gflags libgflags)
if((NOT GFLAGS_INCLUDE_PATH) OR (NOT GFLAGS_LIBRARY))
message(FATAL_ERROR "Fail to find gflags")
endif()
-include_directories(${GFLAGS_INCLUDE_PATH})
-
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
- include(CheckFunctionExists)
- CHECK_FUNCTION_EXISTS(clock_gettime HAVE_CLOCK_GETTIME)
- if(NOT HAVE_CLOCK_GETTIME)
- set(DEFINE_CLOCK_GETTIME "-DNO_CLOCK_GETTIME_IN_MAC")
- endif()
-endif()
-
-set(CMAKE_CXX_FLAGS "${DEFINE_CLOCK_GETTIME} -DNDEBUG -O2
-D__const__=__unused__ -pipe -W -Wall -Wno-unused-parameter -fPIC
-fno-omit-frame-pointer")
-
-if(CMAKE_VERSION VERSION_LESS "3.1.3")
- if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
- if(CMAKE_CXX_COMPILER_ID STREQUAL "Clang")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
-else()
- set(CMAKE_CXX_STANDARD 11)
- set(CMAKE_CXX_STANDARD_REQUIRED ON)
-endif()
find_path(LEVELDB_INCLUDE_PATH NAMES leveldb/db.h)
find_library(LEVELDB_LIB NAMES leveldb)
if ((NOT LEVELDB_INCLUDE_PATH) OR (NOT LEVELDB_LIB))
message(FATAL_ERROR "Fail to find leveldb")
endif()
-include_directories(${LEVELDB_INCLUDE_PATH})
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
+if(CMAKE_SYSTEM_NAME STREQUAL "Darwin" AND NOT OPENSSL_ROOT_DIR)
set(OPENSSL_ROOT_DIR
"/usr/local/opt/openssl" # Homebrew installed OpenSSL
)
endif()
-find_package(OpenSSL)
-include_directories(${OPENSSL_INCLUDE_DIR})
+find_package(OpenSSL REQUIRED)
set(DYNAMIC_LIB
- ${CMAKE_THREAD_LIBS_INIT}
+ Threads::Threads
${GFLAGS_LIBRARY}
${PROTOBUF_LIBRARIES}
${LEVELDB_LIB}
@@ -125,7 +101,9 @@ if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
endif()
add_executable(cascade_echo_client client.cpp ${PROTO_SRC} ${PROTO_HEADER})
+brpc_example_configure_target(cascade_echo_client)
add_executable(cascade_echo_server server.cpp ${PROTO_SRC} ${PROTO_HEADER})
+brpc_example_configure_target(cascade_echo_server)
-target_link_libraries(cascade_echo_client ${BRPC_LIB} ${DYNAMIC_LIB})
-target_link_libraries(cascade_echo_server ${BRPC_LIB} ${DYNAMIC_LIB})
+target_link_libraries(cascade_echo_client PRIVATE ${BRPC_LIB} ${DYNAMIC_LIB})
+target_link_libraries(cascade_echo_server PRIVATE ${BRPC_LIB} ${DYNAMIC_LIB})
diff --git a/example/cmake/BrpcExample.cmake b/example/cmake/BrpcExample.cmake
new file mode 100644
index 00000000..a0af0ed5
--- /dev/null
+++ b/example/cmake/BrpcExample.cmake
@@ -0,0 +1,75 @@
+# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements. See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership. The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License. You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing,
+# software distributed under the License is distributed on an
+# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+# KIND, either express or implied. See the License for the
+# specific language governing permissions and limitations
+# under the License.
+
+include_guard(GLOBAL)
+
+function(brpc_example_append_existing_dirs out_var)
+ set(_dirs)
+ foreach(_dir IN LISTS ARGN)
+ if(_dir AND NOT _dir MATCHES "-NOTFOUND$")
+ list(APPEND _dirs ${_dir})
+ endif()
+ endforeach()
+ set(${out_var} ${_dirs} PARENT_SCOPE)
+endfunction()
+
+function(brpc_example_configure_target target_name)
+ brpc_example_append_existing_dirs(_include_dirs
+ ${CMAKE_CURRENT_BINARY_DIR}
+ ${BRPC_INCLUDE_PATH}
+ ${GFLAGS_INCLUDE_PATH}
+ ${LEVELDB_INCLUDE_PATH}
+ ${OPENSSL_INCLUDE_DIR}
+ ${GPERFTOOLS_INCLUDE_DIR}
+ ${RDMA_INCLUDE_PATH}
+ )
+
+ if(_include_dirs)
+ target_include_directories(${target_name} PRIVATE ${_include_dirs})
+ endif()
+
+ target_compile_features(${target_name} PRIVATE cxx_std_11)
+ target_compile_definitions(${target_name} PRIVATE
+ NDEBUG
+ __const__=__unused__
+ )
+ target_compile_options(${target_name} PRIVATE
+ -O2
+ -pipe
+ -W
+ -Wall
+ -Wno-unused-parameter
+ -fPIC
+ -fno-omit-frame-pointer
+ )
+
+ if(BRPC_EXAMPLE_ENABLE_CPU_PROFILER)
+ target_compile_definitions(${target_name} PRIVATE
BRPC_ENABLE_CPU_PROFILER)
+ endif()
+
+ if(BRPC_EXAMPLE_WITH_RDMA)
+ target_compile_definitions(${target_name} PRIVATE BRPC_WITH_RDMA=1)
+ endif()
+
+ if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
+ include(CheckFunctionExists)
+ check_function_exists(clock_gettime BRPC_EXAMPLE_HAVE_CLOCK_GETTIME)
+ if(NOT BRPC_EXAMPLE_HAVE_CLOCK_GETTIME)
+ target_compile_definitions(${target_name} PRIVATE
NO_CLOCK_GETTIME_IN_MAC)
+ endif()
+ endif()
+endfunction()
diff --git a/example/dynamic_partition_echo_c++/CMakeLists.txt
b/example/dynamic_partition_echo_c++/CMakeLists.txt
index cf79c8cb..df370a83 100644
--- a/example/dynamic_partition_echo_c++/CMakeLists.txt
+++ b/example/dynamic_partition_echo_c++/CMakeLists.txt
@@ -15,9 +15,11 @@
# specific language governing permissions and limitations
# under the License.
-cmake_minimum_required(VERSION 2.8.10)
+cmake_minimum_required(VERSION 3.16...3.28)
project(dynamic_partition_echo_c++ C CXX)
+include(${CMAKE_CURRENT_LIST_DIR}/../cmake/BrpcExample.cmake)
+
option(LINK_SO "Whether examples are linked dynamically" OFF)
execute_process(
@@ -25,17 +27,16 @@ execute_process(
OUTPUT_VARIABLE OUTPUT_PATH
)
-set(CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+if(OUTPUT_PATH)
+ list(PREPEND CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+endif()
-include(FindThreads)
-include(FindProtobuf)
+find_package(Threads REQUIRED)
+find_package(Protobuf REQUIRED)
protobuf_generate_cpp(PROTO_SRC PROTO_HEADER echo.proto)
-# include PROTO_HEADER
-include_directories(${CMAKE_CURRENT_BINARY_DIR})
find_path(GPERFTOOLS_INCLUDE_DIR NAMES gperftools/heap-profiler.h)
find_library(GPERFTOOLS_LIBRARIES NAMES tcmalloc_and_profiler)
-include_directories(${GPERFTOOLS_INCLUDE_DIR})
# Search for libthrift* by best effort. If it is not found and brpc is
# compiled with thrift protocol enabled, a link error would be reported.
@@ -53,57 +54,31 @@ endif()
if((NOT BRPC_INCLUDE_PATH) OR (NOT BRPC_LIB))
message(FATAL_ERROR "Fail to find brpc")
endif()
-include_directories(${BRPC_INCLUDE_PATH})
find_path(GFLAGS_INCLUDE_PATH gflags/gflags.h)
find_library(GFLAGS_LIBRARY NAMES gflags libgflags)
if((NOT GFLAGS_INCLUDE_PATH) OR (NOT GFLAGS_LIBRARY))
message(FATAL_ERROR "Fail to find gflags")
endif()
-include_directories(${GFLAGS_INCLUDE_PATH})
-
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
- include(CheckFunctionExists)
- CHECK_FUNCTION_EXISTS(clock_gettime HAVE_CLOCK_GETTIME)
- if(NOT HAVE_CLOCK_GETTIME)
- set(DEFINE_CLOCK_GETTIME "-DNO_CLOCK_GETTIME_IN_MAC")
- endif()
-endif()
-set(CMAKE_CXX_FLAGS "${DEFINE_CLOCK_GETTIME} -DNDEBUG -O2
-D__const__=__unused__ -pipe -W -Wall -Wno-unused-parameter -fPIC
-fno-omit-frame-pointer")
-set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -DBRPC_ENABLE_CPU_PROFILER")
-
-if(CMAKE_VERSION VERSION_LESS "3.1.3")
- if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
- if(CMAKE_CXX_COMPILER_ID STREQUAL "Clang")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
-else()
- set(CMAKE_CXX_STANDARD 11)
- set(CMAKE_CXX_STANDARD_REQUIRED ON)
-endif()
+set(BRPC_EXAMPLE_ENABLE_CPU_PROFILER ON)
find_path(LEVELDB_INCLUDE_PATH NAMES leveldb/db.h)
find_library(LEVELDB_LIB NAMES leveldb)
if ((NOT LEVELDB_INCLUDE_PATH) OR (NOT LEVELDB_LIB))
message(FATAL_ERROR "Fail to find leveldb")
endif()
-include_directories(${LEVELDB_INCLUDE_PATH})
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
+if(CMAKE_SYSTEM_NAME STREQUAL "Darwin" AND NOT OPENSSL_ROOT_DIR)
set(OPENSSL_ROOT_DIR
"/usr/local/opt/openssl" # Homebrew installed OpenSSL
)
endif()
-find_package(OpenSSL)
-include_directories(${OPENSSL_INCLUDE_DIR})
-
+find_package(OpenSSL REQUIRED)
set(DYNAMIC_LIB
- ${CMAKE_THREAD_LIBS_INIT}
+ Threads::Threads
${GFLAGS_LIBRARY}
${PROTOBUF_LIBRARIES}
${LEVELDB_LIB}
@@ -132,10 +107,12 @@ if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
endif()
add_executable(dynamic_partition_echo_client client.cpp ${PROTO_SRC}
${PROTO_HEADER})
+brpc_example_configure_target(dynamic_partition_echo_client)
add_executable(dynamic_partition_echo_server server.cpp ${PROTO_SRC}
${PROTO_HEADER})
+brpc_example_configure_target(dynamic_partition_echo_server)
-target_link_libraries(dynamic_partition_echo_client ${BRPC_LIB} ${DYNAMIC_LIB}
${GPERFTOOLS_LIBRARIES})
-target_link_libraries(dynamic_partition_echo_server ${BRPC_LIB} ${DYNAMIC_LIB}
${GPERFTOOLS_LIBRARIES})
+target_link_libraries(dynamic_partition_echo_client PRIVATE ${BRPC_LIB}
${DYNAMIC_LIB} ${GPERFTOOLS_LIBRARIES})
+target_link_libraries(dynamic_partition_echo_server PRIVATE ${BRPC_LIB}
${DYNAMIC_LIB} ${GPERFTOOLS_LIBRARIES})
file(COPY ${PROJECT_SOURCE_DIR}/server_list
DESTINATION ${CMAKE_CURRENT_BINARY_DIR})
diff --git a/example/echo_c++/CMakeLists.txt b/example/echo_c++/CMakeLists.txt
index 02d24779..5250959b 100644
--- a/example/echo_c++/CMakeLists.txt
+++ b/example/echo_c++/CMakeLists.txt
@@ -15,9 +15,11 @@
# specific language governing permissions and limitations
# under the License.
-cmake_minimum_required(VERSION 2.8.10)
+cmake_minimum_required(VERSION 3.16...3.28)
project(echo_c++ C CXX)
+include(${CMAKE_CURRENT_LIST_DIR}/../cmake/BrpcExample.cmake)
+
option(LINK_SO "Whether examples are linked dynamically" OFF)
execute_process(
@@ -25,13 +27,13 @@ execute_process(
OUTPUT_VARIABLE OUTPUT_PATH
)
-set(CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+if(OUTPUT_PATH)
+ list(PREPEND CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+endif()
-include(FindThreads)
-include(FindProtobuf)
+find_package(Threads REQUIRED)
+find_package(Protobuf REQUIRED)
protobuf_generate_cpp(PROTO_SRC PROTO_HEADER echo.proto)
-# include PROTO_HEADER
-include_directories(${CMAKE_CURRENT_BINARY_DIR})
# Search for libthrift* by best effort. If it is not found and brpc is
# compiled with thrift protocol enabled, a link error would be reported.
@@ -49,55 +51,29 @@ endif()
if((NOT BRPC_INCLUDE_PATH) OR (NOT BRPC_LIB))
message(FATAL_ERROR "Fail to find brpc")
endif()
-include_directories(${BRPC_INCLUDE_PATH})
find_path(GFLAGS_INCLUDE_PATH gflags/gflags.h)
find_library(GFLAGS_LIBRARY NAMES gflags libgflags)
if((NOT GFLAGS_INCLUDE_PATH) OR (NOT GFLAGS_LIBRARY))
message(FATAL_ERROR "Fail to find gflags")
endif()
-include_directories(${GFLAGS_INCLUDE_PATH})
-
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
- include(CheckFunctionExists)
- CHECK_FUNCTION_EXISTS(clock_gettime HAVE_CLOCK_GETTIME)
- if(NOT HAVE_CLOCK_GETTIME)
- set(DEFINE_CLOCK_GETTIME "-DNO_CLOCK_GETTIME_IN_MAC")
- endif()
-endif()
-
-set(CMAKE_CXX_FLAGS "${DEFINE_CLOCK_GETTIME} -DNDEBUG -O2
-D__const__=__unused__ -pipe -W -Wall -Wno-unused-parameter -fPIC
-fno-omit-frame-pointer")
-
-if(CMAKE_VERSION VERSION_LESS "3.1.3")
- if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
- if(CMAKE_CXX_COMPILER_ID STREQUAL "Clang")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
-else()
- set(CMAKE_CXX_STANDARD 11)
- set(CMAKE_CXX_STANDARD_REQUIRED ON)
-endif()
find_path(LEVELDB_INCLUDE_PATH NAMES leveldb/db.h)
find_library(LEVELDB_LIB NAMES leveldb)
if ((NOT LEVELDB_INCLUDE_PATH) OR (NOT LEVELDB_LIB))
message(FATAL_ERROR "Fail to find leveldb")
endif()
-include_directories(${LEVELDB_INCLUDE_PATH})
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
+if(CMAKE_SYSTEM_NAME STREQUAL "Darwin" AND NOT OPENSSL_ROOT_DIR)
set(OPENSSL_ROOT_DIR
"/usr/local/opt/openssl" # Homebrew installed OpenSSL
)
endif()
-find_package(OpenSSL)
-include_directories(${OPENSSL_INCLUDE_DIR})
+find_package(OpenSSL REQUIRED)
set(DYNAMIC_LIB
- ${CMAKE_THREAD_LIBS_INIT}
+ Threads::Threads
${GFLAGS_LIBRARY}
${PROTOBUF_LIBRARIES}
${LEVELDB_LIB}
@@ -126,7 +102,9 @@ if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
endif()
add_executable(echo_client client.cpp ${PROTO_SRC} ${PROTO_HEADER})
+brpc_example_configure_target(echo_client)
add_executable(echo_server server.cpp ${PROTO_SRC} ${PROTO_HEADER})
+brpc_example_configure_target(echo_server)
-target_link_libraries(echo_client ${BRPC_LIB} ${DYNAMIC_LIB})
-target_link_libraries(echo_server ${BRPC_LIB} ${DYNAMIC_LIB})
+target_link_libraries(echo_client PRIVATE ${BRPC_LIB} ${DYNAMIC_LIB})
+target_link_libraries(echo_server PRIVATE ${BRPC_LIB} ${DYNAMIC_LIB})
diff --git a/example/grpc_c++/CMakeLists.txt b/example/grpc_c++/CMakeLists.txt
index 3d947688..9d3340db 100644
--- a/example/grpc_c++/CMakeLists.txt
+++ b/example/grpc_c++/CMakeLists.txt
@@ -15,9 +15,11 @@
# specific language governing permissions and limitations
# under the License.
-cmake_minimum_required(VERSION 2.8.10)
+cmake_minimum_required(VERSION 3.16...3.28)
project(grpc_c++ C CXX)
+include(${CMAKE_CURRENT_LIST_DIR}/../cmake/BrpcExample.cmake)
+
option(LINK_SO "Whether examples are linked dynamically" OFF)
execute_process(
@@ -25,17 +27,16 @@ execute_process(
OUTPUT_VARIABLE OUTPUT_PATH
)
-set(CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+if(OUTPUT_PATH)
+ list(PREPEND CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+endif()
-include(FindThreads)
-include(FindProtobuf)
+find_package(Threads REQUIRED)
+find_package(Protobuf REQUIRED)
protobuf_generate_cpp(PROTO_SRC PROTO_HEADER helloworld.proto)
-# include PROTO_HEADER
-include_directories(${CMAKE_CURRENT_BINARY_DIR})
find_path(GPERFTOOLS_INCLUDE_DIR NAMES gperftools/heap-profiler.h)
find_library(GPERFTOOLS_LIBRARIES NAMES tcmalloc_and_profiler)
-include_directories(${GPERFTOOLS_INCLUDE_DIR})
find_path(BRPC_INCLUDE_PATH NAMES brpc/server.h)
if(LINK_SO)
@@ -46,56 +47,31 @@ endif()
if((NOT BRPC_INCLUDE_PATH) OR (NOT BRPC_LIB))
message(FATAL_ERROR "Fail to find brpc")
endif()
-include_directories(${BRPC_INCLUDE_PATH})
find_path(GFLAGS_INCLUDE_PATH gflags/gflags.h)
find_library(GFLAGS_LIBRARY NAMES gflags libgflags)
if((NOT GFLAGS_INCLUDE_PATH) OR (NOT GFLAGS_LIBRARY))
message(FATAL_ERROR "Fail to find gflags")
endif()
-include_directories(${GFLAGS_INCLUDE_PATH})
-
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
- include(CheckFunctionExists)
- CHECK_FUNCTION_EXISTS(clock_gettime HAVE_CLOCK_GETTIME)
- if(NOT HAVE_CLOCK_GETTIME)
- set(DEFINE_CLOCK_GETTIME "-DNO_CLOCK_GETTIME_IN_MAC")
- endif()
-endif()
-set(CMAKE_CXX_FLAGS "${DEFINE_CLOCK_GETTIME} -DNDEBUG -O2
-D__const__=__unused__ -pipe -W -Wall -Wno-unused-parameter -fPIC
-fno-omit-frame-pointer")
-set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -DBRPC_ENABLE_CPU_PROFILER")
-
-if(CMAKE_VERSION VERSION_LESS "3.1.3")
- if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
- if(CMAKE_CXX_COMPILER_ID STREQUAL "Clang")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
-else()
- set(CMAKE_CXX_STANDARD 11)
- set(CMAKE_CXX_STANDARD_REQUIRED ON)
-endif()
+set(BRPC_EXAMPLE_ENABLE_CPU_PROFILER ON)
find_path(LEVELDB_INCLUDE_PATH NAMES leveldb/db.h)
find_library(LEVELDB_LIB NAMES leveldb)
if ((NOT LEVELDB_INCLUDE_PATH) OR (NOT LEVELDB_LIB))
message(FATAL_ERROR "Fail to find leveldb")
endif()
-include_directories(${LEVELDB_INCLUDE_PATH})
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
+if(CMAKE_SYSTEM_NAME STREQUAL "Darwin" AND NOT OPENSSL_ROOT_DIR)
set(OPENSSL_ROOT_DIR
"/usr/local/opt/openssl" # Homebrew installed OpenSSL
)
endif()
-find_package(OpenSSL)
-include_directories(${OPENSSL_INCLUDE_DIR})
+find_package(OpenSSL REQUIRED)
set(DYNAMIC_LIB
- ${CMAKE_THREAD_LIBS_INIT}
+ Threads::Threads
${GFLAGS_LIBRARY}
${PROTOBUF_LIBRARIES}
${LEVELDB_LIB}
@@ -125,7 +101,9 @@ if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
endif()
add_executable(server server.cpp ${PROTO_SRC} ${PROTO_HEADER} )
+brpc_example_configure_target(server)
add_executable(client client.cpp ${PROTO_SRC} ${PROTO_HEADER})
+brpc_example_configure_target(client)
-target_link_libraries(server ${BRPC_LIB} ${DYNAMIC_LIB}
${GPERFTOOLS_LIBRARIES})
-target_link_libraries(client ${BRPC_LIB} ${DYNAMIC_LIB}
${GPERFTOOLS_LIBRARIES})
+target_link_libraries(server PRIVATE ${BRPC_LIB} ${DYNAMIC_LIB}
${GPERFTOOLS_LIBRARIES})
+target_link_libraries(client PRIVATE ${BRPC_LIB} ${DYNAMIC_LIB}
${GPERFTOOLS_LIBRARIES})
diff --git a/example/http_c++/CMakeLists.txt b/example/http_c++/CMakeLists.txt
index 66c4deec..ee20fe6e 100644
--- a/example/http_c++/CMakeLists.txt
+++ b/example/http_c++/CMakeLists.txt
@@ -15,9 +15,11 @@
# specific language governing permissions and limitations
# under the License.
-cmake_minimum_required(VERSION 2.8.10)
+cmake_minimum_required(VERSION 3.16...3.28)
project(http_c++ C CXX)
+include(${CMAKE_CURRENT_LIST_DIR}/../cmake/BrpcExample.cmake)
+
option(LINK_SO "Whether examples are linked dynamically" OFF)
execute_process(
@@ -25,13 +27,13 @@ execute_process(
OUTPUT_VARIABLE OUTPUT_PATH
)
-set(CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+if(OUTPUT_PATH)
+ list(PREPEND CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+endif()
-include(FindThreads)
-include(FindProtobuf)
+find_package(Threads REQUIRED)
+find_package(Protobuf REQUIRED)
protobuf_generate_cpp(PROTO_SRC PROTO_HEADER http.proto)
-# include PROTO_HEADER
-include_directories(${CMAKE_CURRENT_BINARY_DIR})
# Search for libthrift* by best effort. If it is not found and brpc is
# compiled with thrift protocol enabled, a link error would be reported.
@@ -42,7 +44,6 @@ endif()
find_path(GPERFTOOLS_INCLUDE_DIR NAMES gperftools/heap-profiler.h)
find_library(GPERFTOOLS_LIBRARIES NAMES tcmalloc_and_profiler)
-include_directories(${GPERFTOOLS_INCLUDE_DIR})
find_path(BRPC_INCLUDE_PATH NAMES brpc/server.h)
if(LINK_SO)
@@ -53,57 +54,31 @@ endif()
if((NOT BRPC_INCLUDE_PATH) OR (NOT BRPC_LIB))
message(FATAL_ERROR "Fail to find brpc")
endif()
-include_directories(${BRPC_INCLUDE_PATH})
find_path(GFLAGS_INCLUDE_PATH gflags/gflags.h)
find_library(GFLAGS_LIBRARY NAMES gflags libgflags)
if((NOT GFLAGS_INCLUDE_PATH) OR (NOT GFLAGS_LIBRARY))
message(FATAL_ERROR "Fail to find gflags")
endif()
-include_directories(${GFLAGS_INCLUDE_PATH})
-
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
- include(CheckFunctionExists)
- CHECK_FUNCTION_EXISTS(clock_gettime HAVE_CLOCK_GETTIME)
- if(NOT HAVE_CLOCK_GETTIME)
- set(DEFINE_CLOCK_GETTIME "-DNO_CLOCK_GETTIME_IN_MAC")
- endif()
-endif()
-set(CMAKE_CXX_FLAGS "${DEFINE_CLOCK_GETTIME} -DNDEBUG -O2
-D__const__=__unused__ -pipe -W -Wall -Wno-unused-parameter -fPIC
-fno-omit-frame-pointer")
-set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -DBRPC_ENABLE_CPU_PROFILER")
-
-if(CMAKE_VERSION VERSION_LESS "3.1.3")
- if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
- if(CMAKE_CXX_COMPILER_ID STREQUAL "Clang")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
-else()
- set(CMAKE_CXX_STANDARD 11)
- set(CMAKE_CXX_STANDARD_REQUIRED ON)
-endif()
+set(BRPC_EXAMPLE_ENABLE_CPU_PROFILER ON)
find_path(LEVELDB_INCLUDE_PATH NAMES leveldb/db.h)
find_library(LEVELDB_LIB NAMES leveldb)
if ((NOT LEVELDB_INCLUDE_PATH) OR (NOT LEVELDB_LIB))
message(FATAL_ERROR "Fail to find leveldb")
endif()
-include_directories(${LEVELDB_INCLUDE_PATH})
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
+if(CMAKE_SYSTEM_NAME STREQUAL "Darwin" AND NOT OPENSSL_ROOT_DIR)
set(OPENSSL_ROOT_DIR
"/usr/local/opt/openssl" # Homebrew installed OpenSSL
)
endif()
-find_package(OpenSSL)
-include_directories(${OPENSSL_INCLUDE_DIR})
-
+find_package(OpenSSL REQUIRED)
set(DYNAMIC_LIB
- ${CMAKE_THREAD_LIBS_INIT}
+ Threads::Threads
${GFLAGS_LIBRARY}
${PROTOBUF_LIBRARIES}
${LEVELDB_LIB}
@@ -132,12 +107,15 @@ if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
endif()
add_executable(http_client http_client.cpp)
+brpc_example_configure_target(http_client)
add_executable(http_server http_server.cpp ${PROTO_SRC} ${PROTO_HEADER})
+brpc_example_configure_target(http_server)
add_executable(benchmark_http benchmark_http.cpp)
+brpc_example_configure_target(benchmark_http)
-target_link_libraries(http_server ${BRPC_LIB} ${DYNAMIC_LIB}
${GPERFTOOLS_LIBRARIES})
-target_link_libraries(http_client ${BRPC_LIB} ${DYNAMIC_LIB}
${GPERFTOOLS_LIBRARIES})
-target_link_libraries(benchmark_http ${BRPC_LIB} ${DYNAMIC_LIB}
${GPERFTOOLS_LIBRARIES})
+target_link_libraries(http_server PRIVATE ${BRPC_LIB} ${DYNAMIC_LIB}
${GPERFTOOLS_LIBRARIES})
+target_link_libraries(http_client PRIVATE ${BRPC_LIB} ${DYNAMIC_LIB}
${GPERFTOOLS_LIBRARIES})
+target_link_libraries(benchmark_http PRIVATE ${BRPC_LIB} ${DYNAMIC_LIB}
${GPERFTOOLS_LIBRARIES})
file(COPY ${PROJECT_SOURCE_DIR}/key.pem
DESTINATION ${CMAKE_CURRENT_BINARY_DIR})
diff --git a/example/memcache_c++/CMakeLists.txt
b/example/memcache_c++/CMakeLists.txt
index e3e70f96..658e6028 100644
--- a/example/memcache_c++/CMakeLists.txt
+++ b/example/memcache_c++/CMakeLists.txt
@@ -15,9 +15,11 @@
# specific language governing permissions and limitations
# under the License.
-cmake_minimum_required(VERSION 2.8.10)
+cmake_minimum_required(VERSION 3.16...3.28)
project(memcache_c++ C CXX)
+include(${CMAKE_CURRENT_LIST_DIR}/../cmake/BrpcExample.cmake)
+
option(LINK_SO "Whether examples are linked dynamically" OFF)
execute_process(
@@ -25,13 +27,13 @@ execute_process(
OUTPUT_VARIABLE OUTPUT_PATH
)
-set(CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+if(OUTPUT_PATH)
+ list(PREPEND CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+endif()
-include(FindThreads)
-include(FindProtobuf)
+find_package(Threads REQUIRED)
+find_package(Protobuf REQUIRED)
protobuf_generate_cpp(PROTO_SRC PROTO_HEADER echo.proto)
-# include PROTO_HEADER
-include_directories(${CMAKE_CURRENT_BINARY_DIR})
# Search for libthrift* by best effort. If it is not found and brpc is
# compiled with thrift protocol enabled, a link error would be reported.
@@ -49,55 +51,29 @@ endif()
if((NOT BRPC_INCLUDE_PATH) OR (NOT BRPC_LIB))
message(FATAL_ERROR "Fail to find brpc")
endif()
-include_directories(${BRPC_INCLUDE_PATH})
find_path(GFLAGS_INCLUDE_PATH gflags/gflags.h)
find_library(GFLAGS_LIBRARY NAMES gflags libgflags)
if((NOT GFLAGS_INCLUDE_PATH) OR (NOT GFLAGS_LIBRARY))
message(FATAL_ERROR "Fail to find gflags")
endif()
-include_directories(${GFLAGS_INCLUDE_PATH})
-
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
- include(CheckFunctionExists)
- CHECK_FUNCTION_EXISTS(clock_gettime HAVE_CLOCK_GETTIME)
- if(NOT HAVE_CLOCK_GETTIME)
- set(DEFINE_CLOCK_GETTIME "-DNO_CLOCK_GETTIME_IN_MAC")
- endif()
-endif()
-
-set(CMAKE_CXX_FLAGS "${DEFINE_CLOCK_GETTIME} -DNDEBUG -O2
-D__const__=__unused__ -pipe -W -Wall -Wno-unused-parameter -fPIC
-fno-omit-frame-pointer")
-
-if(CMAKE_VERSION VERSION_LESS "3.1.3")
- if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
- if(CMAKE_CXX_COMPILER_ID STREQUAL "Clang")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
-else()
- set(CMAKE_CXX_STANDARD 11)
- set(CMAKE_CXX_STANDARD_REQUIRED ON)
-endif()
find_path(LEVELDB_INCLUDE_PATH NAMES leveldb/db.h)
find_library(LEVELDB_LIB NAMES leveldb)
if ((NOT LEVELDB_INCLUDE_PATH) OR (NOT LEVELDB_LIB))
message(FATAL_ERROR "Fail to find leveldb")
endif()
-include_directories(${LEVELDB_INCLUDE_PATH})
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
+if(CMAKE_SYSTEM_NAME STREQUAL "Darwin" AND NOT OPENSSL_ROOT_DIR)
set(OPENSSL_ROOT_DIR
"/usr/local/opt/openssl" # Homebrew installed OpenSSL
)
endif()
-find_package(OpenSSL)
-include_directories(${OPENSSL_INCLUDE_DIR})
+find_package(OpenSSL REQUIRED)
set(DYNAMIC_LIB
- ${CMAKE_THREAD_LIBS_INIT}
+ Threads::Threads
${GFLAGS_LIBRARY}
${PROTOBUF_LIBRARIES}
${LEVELDB_LIB}
@@ -126,5 +102,6 @@ if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
endif()
add_executable(memcache_client client.cpp)
+brpc_example_configure_target(memcache_client)
-target_link_libraries(memcache_client ${BRPC_LIB} ${DYNAMIC_LIB})
+target_link_libraries(memcache_client PRIVATE ${BRPC_LIB} ${DYNAMIC_LIB})
diff --git a/example/multi_threaded_echo_c++/CMakeLists.txt
b/example/multi_threaded_echo_c++/CMakeLists.txt
index d57886b6..1c17fa9c 100644
--- a/example/multi_threaded_echo_c++/CMakeLists.txt
+++ b/example/multi_threaded_echo_c++/CMakeLists.txt
@@ -15,9 +15,11 @@
# specific language governing permissions and limitations
# under the License.
-cmake_minimum_required(VERSION 2.8.10)
+cmake_minimum_required(VERSION 3.16...3.28)
project(multi_threaded_echo_c++ C CXX)
+include(${CMAKE_CURRENT_LIST_DIR}/../cmake/BrpcExample.cmake)
+
option(LINK_SO "Whether examples are linked dynamically" OFF)
execute_process(
@@ -25,13 +27,13 @@ execute_process(
OUTPUT_VARIABLE OUTPUT_PATH
)
-set(CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+if(OUTPUT_PATH)
+ list(PREPEND CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+endif()
-include(FindThreads)
-include(FindProtobuf)
+find_package(Threads REQUIRED)
+find_package(Protobuf REQUIRED)
protobuf_generate_cpp(PROTO_SRC PROTO_HEADER echo.proto)
-# include PROTO_HEADER
-include_directories(${CMAKE_CURRENT_BINARY_DIR})
# Search for libthrift* by best effort. If it is not found and brpc is
# compiled with thrift protocol enabled, a link error would be reported.
@@ -42,7 +44,6 @@ endif()
find_path(GPERFTOOLS_INCLUDE_DIR NAMES gperftools/heap-profiler.h)
find_library(GPERFTOOLS_LIBRARIES NAMES tcmalloc_and_profiler)
-include_directories(${GPERFTOOLS_INCLUDE_DIR})
find_path(BRPC_INCLUDE_PATH NAMES brpc/server.h)
if(LINK_SO)
@@ -53,57 +54,31 @@ endif()
if((NOT BRPC_INCLUDE_PATH) OR (NOT BRPC_LIB))
message(FATAL_ERROR "Fail to find brpc")
endif()
-include_directories(${BRPC_INCLUDE_PATH})
find_path(GFLAGS_INCLUDE_PATH gflags/gflags.h)
find_library(GFLAGS_LIBRARY NAMES gflags libgflags)
if((NOT GFLAGS_INCLUDE_PATH) OR (NOT GFLAGS_LIBRARY))
message(FATAL_ERROR "Fail to find gflags")
endif()
-include_directories(${GFLAGS_INCLUDE_PATH})
-
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
- include(CheckFunctionExists)
- CHECK_FUNCTION_EXISTS(clock_gettime HAVE_CLOCK_GETTIME)
- if(NOT HAVE_CLOCK_GETTIME)
- set(DEFINE_CLOCK_GETTIME "-DNO_CLOCK_GETTIME_IN_MAC")
- endif()
-endif()
-set(CMAKE_CXX_FLAGS "${DEFINE_CLOCK_GETTIME} -DNDEBUG -O2
-D__const__=__unused__ -pipe -W -Wall -Wno-unused-parameter -fPIC
-fno-omit-frame-pointer")
-set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -DBRPC_ENABLE_CPU_PROFILER")
-
-if(CMAKE_VERSION VERSION_LESS "3.1.3")
- if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
- if(CMAKE_CXX_COMPILER_ID STREQUAL "Clang")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
-else()
- set(CMAKE_CXX_STANDARD 11)
- set(CMAKE_CXX_STANDARD_REQUIRED ON)
-endif()
+set(BRPC_EXAMPLE_ENABLE_CPU_PROFILER ON)
find_path(LEVELDB_INCLUDE_PATH NAMES leveldb/db.h)
find_library(LEVELDB_LIB NAMES leveldb)
if ((NOT LEVELDB_INCLUDE_PATH) OR (NOT LEVELDB_LIB))
message(FATAL_ERROR "Fail to find leveldb")
endif()
-include_directories(${LEVELDB_INCLUDE_PATH})
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
+if(CMAKE_SYSTEM_NAME STREQUAL "Darwin" AND NOT OPENSSL_ROOT_DIR)
set(OPENSSL_ROOT_DIR
"/usr/local/opt/openssl" # Homebrew installed OpenSSL
)
endif()
-find_package(OpenSSL)
-include_directories(${OPENSSL_INCLUDE_DIR})
-
+find_package(OpenSSL REQUIRED)
set(DYNAMIC_LIB
- ${CMAKE_THREAD_LIBS_INIT}
+ Threads::Threads
${GFLAGS_LIBRARY}
${PROTOBUF_LIBRARIES}
${LEVELDB_LIB}
@@ -132,10 +107,12 @@ if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
endif()
add_executable(echo_client client.cpp ${PROTO_SRC} ${PROTO_HEADER})
+brpc_example_configure_target(echo_client)
add_executable(echo_server server.cpp ${PROTO_SRC} ${PROTO_HEADER})
+brpc_example_configure_target(echo_server)
-target_link_libraries(echo_client ${BRPC_LIB} ${DYNAMIC_LIB}
${GPERFTOOLS_LIBRARIES})
-target_link_libraries(echo_server ${BRPC_LIB} ${DYNAMIC_LIB}
${GPERFTOOLS_LIBRARIES})
+target_link_libraries(echo_client PRIVATE ${BRPC_LIB} ${DYNAMIC_LIB}
${GPERFTOOLS_LIBRARIES})
+target_link_libraries(echo_server PRIVATE ${BRPC_LIB} ${DYNAMIC_LIB}
${GPERFTOOLS_LIBRARIES})
file(COPY ${PROJECT_SOURCE_DIR}/key.pem
DESTINATION ${CMAKE_CURRENT_BINARY_DIR})
diff --git a/example/multi_threaded_echo_fns_c++/CMakeLists.txt
b/example/multi_threaded_echo_fns_c++/CMakeLists.txt
index 0805485d..e184148f 100644
--- a/example/multi_threaded_echo_fns_c++/CMakeLists.txt
+++ b/example/multi_threaded_echo_fns_c++/CMakeLists.txt
@@ -15,9 +15,11 @@
# specific language governing permissions and limitations
# under the License.
-cmake_minimum_required(VERSION 2.8.10)
+cmake_minimum_required(VERSION 3.16...3.28)
project(multi_threaded_echo_fns_c++ C CXX)
+include(${CMAKE_CURRENT_LIST_DIR}/../cmake/BrpcExample.cmake)
+
option(LINK_SO "Whether examples are linked dynamically" OFF)
execute_process(
@@ -25,13 +27,13 @@ execute_process(
OUTPUT_VARIABLE OUTPUT_PATH
)
-set(CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+if(OUTPUT_PATH)
+ list(PREPEND CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+endif()
-include(FindThreads)
-include(FindProtobuf)
+find_package(Threads REQUIRED)
+find_package(Protobuf REQUIRED)
protobuf_generate_cpp(PROTO_SRC PROTO_HEADER echo.proto)
-# include PROTO_HEADER
-include_directories(${CMAKE_CURRENT_BINARY_DIR})
# Search for libthrift* by best effort. If it is not found and brpc is
# compiled with thrift protocol enabled, a link error would be reported.
@@ -42,7 +44,6 @@ endif()
find_path(GPERFTOOLS_INCLUDE_DIR NAMES gperftools/heap-profiler.h)
find_library(GPERFTOOLS_LIBRARIES NAMES tcmalloc_and_profiler)
-include_directories(${GPERFTOOLS_INCLUDE_DIR})
find_path(BRPC_INCLUDE_PATH NAMES brpc/server.h)
if(LINK_SO)
@@ -53,57 +54,31 @@ endif()
if((NOT BRPC_INCLUDE_PATH) OR (NOT BRPC_LIB))
message(FATAL_ERROR "Fail to find brpc")
endif()
-include_directories(${BRPC_INCLUDE_PATH})
find_path(GFLAGS_INCLUDE_PATH gflags/gflags.h)
find_library(GFLAGS_LIBRARY NAMES gflags libgflags)
if((NOT GFLAGS_INCLUDE_PATH) OR (NOT GFLAGS_LIBRARY))
message(FATAL_ERROR "Fail to find gflags")
endif()
-include_directories(${GFLAGS_INCLUDE_PATH})
-
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
- include(CheckFunctionExists)
- CHECK_FUNCTION_EXISTS(clock_gettime HAVE_CLOCK_GETTIME)
- if(NOT HAVE_CLOCK_GETTIME)
- set(DEFINE_CLOCK_GETTIME "-DNO_CLOCK_GETTIME_IN_MAC")
- endif()
-endif()
-set(CMAKE_CXX_FLAGS "${DEFINE_CLOCK_GETTIME} -DNDEBUG -O2
-D__const__=__unused__ -pipe -W -Wall -Wno-unused-parameter -fPIC
-fno-omit-frame-pointer")
-set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -DBRPC_ENABLE_CPU_PROFILER")
-
-if(CMAKE_VERSION VERSION_LESS "3.1.3")
- if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
- if(CMAKE_CXX_COMPILER_ID STREQUAL "Clang")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
-else()
- set(CMAKE_CXX_STANDARD 11)
- set(CMAKE_CXX_STANDARD_REQUIRED ON)
-endif()
+set(BRPC_EXAMPLE_ENABLE_CPU_PROFILER ON)
find_path(LEVELDB_INCLUDE_PATH NAMES leveldb/db.h)
find_library(LEVELDB_LIB NAMES leveldb)
if ((NOT LEVELDB_INCLUDE_PATH) OR (NOT LEVELDB_LIB))
message(FATAL_ERROR "Fail to find leveldb")
endif()
-include_directories(${LEVELDB_INCLUDE_PATH})
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
+if(CMAKE_SYSTEM_NAME STREQUAL "Darwin" AND NOT OPENSSL_ROOT_DIR)
set(OPENSSL_ROOT_DIR
"/usr/local/opt/openssl" # Homebrew installed OpenSSL
)
endif()
-find_package(OpenSSL)
-include_directories(${OPENSSL_INCLUDE_DIR})
-
+find_package(OpenSSL REQUIRED)
set(DYNAMIC_LIB
- ${CMAKE_THREAD_LIBS_INIT}
+ Threads::Threads
${GFLAGS_LIBRARY}
${PROTOBUF_LIBRARIES}
${LEVELDB_LIB}
@@ -132,7 +107,9 @@ if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
endif()
add_executable(multi_threaded_echo_fns_client client.cpp ${PROTO_SRC}
${PROTO_HEADER})
+brpc_example_configure_target(multi_threaded_echo_fns_client)
add_executable(multi_threaded_echo_fns_server server.cpp ${PROTO_SRC}
${PROTO_HEADER})
+brpc_example_configure_target(multi_threaded_echo_fns_server)
-target_link_libraries(multi_threaded_echo_fns_client ${BRPC_LIB}
${DYNAMIC_LIB} ${GPERFTOOLS_LIBRARIES})
-target_link_libraries(multi_threaded_echo_fns_server ${BRPC_LIB}
${DYNAMIC_LIB} ${GPERFTOOLS_LIBRARIES})
+target_link_libraries(multi_threaded_echo_fns_client PRIVATE ${BRPC_LIB}
${DYNAMIC_LIB} ${GPERFTOOLS_LIBRARIES})
+target_link_libraries(multi_threaded_echo_fns_server PRIVATE ${BRPC_LIB}
${DYNAMIC_LIB} ${GPERFTOOLS_LIBRARIES})
diff --git a/example/nshead_extension_c++/CMakeLists.txt
b/example/nshead_extension_c++/CMakeLists.txt
index 244bca68..780e909e 100644
--- a/example/nshead_extension_c++/CMakeLists.txt
+++ b/example/nshead_extension_c++/CMakeLists.txt
@@ -15,9 +15,11 @@
# specific language governing permissions and limitations
# under the License.
-cmake_minimum_required(VERSION 2.8.10)
+cmake_minimum_required(VERSION 3.16...3.28)
project(nshead_extension_c++ C CXX)
+include(${CMAKE_CURRENT_LIST_DIR}/../cmake/BrpcExample.cmake)
+
option(LINK_SO "Whether examples are linked dynamically" OFF)
execute_process(
@@ -25,13 +27,13 @@ execute_process(
OUTPUT_VARIABLE OUTPUT_PATH
)
-set(CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+if(OUTPUT_PATH)
+ list(PREPEND CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+endif()
-include(FindThreads)
-include(FindProtobuf)
+find_package(Threads REQUIRED)
+find_package(Protobuf REQUIRED)
protobuf_generate_cpp(PROTO_SRC PROTO_HEADER echo.proto)
-# include PROTO_HEADER
-include_directories(${CMAKE_CURRENT_BINARY_DIR})
# Search for libthrift* by best effort. If it is not found and brpc is
# compiled with thrift protocol enabled, a link error would be reported.
@@ -49,55 +51,29 @@ endif()
if((NOT BRPC_INCLUDE_PATH) OR (NOT BRPC_LIB))
message(FATAL_ERROR "Fail to find brpc")
endif()
-include_directories(${BRPC_INCLUDE_PATH})
find_path(GFLAGS_INCLUDE_PATH gflags/gflags.h)
find_library(GFLAGS_LIBRARY NAMES gflags libgflags)
if((NOT GFLAGS_INCLUDE_PATH) OR (NOT GFLAGS_LIBRARY))
message(FATAL_ERROR "Fail to find gflags")
endif()
-include_directories(${GFLAGS_INCLUDE_PATH})
-
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
- include(CheckFunctionExists)
- CHECK_FUNCTION_EXISTS(clock_gettime HAVE_CLOCK_GETTIME)
- if(NOT HAVE_CLOCK_GETTIME)
- set(DEFINE_CLOCK_GETTIME "-DNO_CLOCK_GETTIME_IN_MAC")
- endif()
-endif()
-
-set(CMAKE_CXX_FLAGS "${DEFINE_CLOCK_GETTIME} -DNDEBUG -O2
-D__const__=__unused__ -pipe -W -Wall -Wno-unused-parameter -fPIC
-fno-omit-frame-pointer")
-
-if(CMAKE_VERSION VERSION_LESS "3.1.3")
- if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
- if(CMAKE_CXX_COMPILER_ID STREQUAL "Clang")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
-else()
- set(CMAKE_CXX_STANDARD 11)
- set(CMAKE_CXX_STANDARD_REQUIRED ON)
-endif()
find_path(LEVELDB_INCLUDE_PATH NAMES leveldb/db.h)
find_library(LEVELDB_LIB NAMES leveldb)
if ((NOT LEVELDB_INCLUDE_PATH) OR (NOT LEVELDB_LIB))
message(FATAL_ERROR "Fail to find leveldb")
endif()
-include_directories(${LEVELDB_INCLUDE_PATH})
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
+if(CMAKE_SYSTEM_NAME STREQUAL "Darwin" AND NOT OPENSSL_ROOT_DIR)
set(OPENSSL_ROOT_DIR
"/usr/local/opt/openssl" # Homebrew installed OpenSSL
)
endif()
-find_package(OpenSSL)
-include_directories(${OPENSSL_INCLUDE_DIR})
+find_package(OpenSSL REQUIRED)
set(DYNAMIC_LIB
- ${CMAKE_THREAD_LIBS_INIT}
+ Threads::Threads
${GFLAGS_LIBRARY}
${PROTOBUF_LIBRARIES}
${LEVELDB_LIB}
@@ -126,7 +102,9 @@ if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
endif()
add_executable(nshead_extension_client client.cpp)
+brpc_example_configure_target(nshead_extension_client)
add_executable(nshead_extension_server server.cpp)
+brpc_example_configure_target(nshead_extension_server)
-target_link_libraries(nshead_extension_client ${BRPC_LIB} ${DYNAMIC_LIB})
-target_link_libraries(nshead_extension_server ${BRPC_LIB} ${DYNAMIC_LIB})
+target_link_libraries(nshead_extension_client PRIVATE ${BRPC_LIB}
${DYNAMIC_LIB})
+target_link_libraries(nshead_extension_server PRIVATE ${BRPC_LIB}
${DYNAMIC_LIB})
diff --git a/example/nshead_pb_extension_c++/CMakeLists.txt
b/example/nshead_pb_extension_c++/CMakeLists.txt
index b6302949..203dfa7e 100644
--- a/example/nshead_pb_extension_c++/CMakeLists.txt
+++ b/example/nshead_pb_extension_c++/CMakeLists.txt
@@ -15,9 +15,11 @@
# specific language governing permissions and limitations
# under the License.
-cmake_minimum_required(VERSION 2.8.10)
+cmake_minimum_required(VERSION 3.16...3.28)
project(nshead_pb_extension_c++ C CXX)
+include(${CMAKE_CURRENT_LIST_DIR}/../cmake/BrpcExample.cmake)
+
option(LINK_SO "Whether examples are linked dynamically" OFF)
execute_process(
@@ -25,13 +27,13 @@ execute_process(
OUTPUT_VARIABLE OUTPUT_PATH
)
-set(CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+if(OUTPUT_PATH)
+ list(PREPEND CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+endif()
-include(FindThreads)
-include(FindProtobuf)
+find_package(Threads REQUIRED)
+find_package(Protobuf REQUIRED)
protobuf_generate_cpp(PROTO_SRC PROTO_HEADER echo.proto)
-# include PROTO_HEADER
-include_directories(${CMAKE_CURRENT_BINARY_DIR})
# Search for libthrift* by best effort. If it is not found and brpc is
# compiled with thrift protocol enabled, a link error would be reported.
@@ -49,55 +51,29 @@ endif()
if((NOT BRPC_INCLUDE_PATH) OR (NOT BRPC_LIB))
message(FATAL_ERROR "Fail to find brpc")
endif()
-include_directories(${BRPC_INCLUDE_PATH})
find_path(GFLAGS_INCLUDE_PATH gflags/gflags.h)
find_library(GFLAGS_LIBRARY NAMES gflags libgflags)
if((NOT GFLAGS_INCLUDE_PATH) OR (NOT GFLAGS_LIBRARY))
message(FATAL_ERROR "Fail to find gflags")
endif()
-include_directories(${GFLAGS_INCLUDE_PATH})
-
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
- include(CheckFunctionExists)
- CHECK_FUNCTION_EXISTS(clock_gettime HAVE_CLOCK_GETTIME)
- if(NOT HAVE_CLOCK_GETTIME)
- set(DEFINE_CLOCK_GETTIME "-DNO_CLOCK_GETTIME_IN_MAC")
- endif()
-endif()
-
-set(CMAKE_CXX_FLAGS "${DEFINE_CLOCK_GETTIME} -DNDEBUG -O2
-D__const__=__unused__ -pipe -W -Wall -Wno-unused-parameter -fPIC
-fno-omit-frame-pointer")
-
-if(CMAKE_VERSION VERSION_LESS "3.1.3")
- if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
- if(CMAKE_CXX_COMPILER_ID STREQUAL "Clang")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
-else()
- set(CMAKE_CXX_STANDARD 11)
- set(CMAKE_CXX_STANDARD_REQUIRED ON)
-endif()
find_path(LEVELDB_INCLUDE_PATH NAMES leveldb/db.h)
find_library(LEVELDB_LIB NAMES leveldb)
if ((NOT LEVELDB_INCLUDE_PATH) OR (NOT LEVELDB_LIB))
message(FATAL_ERROR "Fail to find leveldb")
endif()
-include_directories(${LEVELDB_INCLUDE_PATH})
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
+if(CMAKE_SYSTEM_NAME STREQUAL "Darwin" AND NOT OPENSSL_ROOT_DIR)
set(OPENSSL_ROOT_DIR
"/usr/local/opt/openssl" # Homebrew installed OpenSSL
)
endif()
-find_package(OpenSSL)
-include_directories(${OPENSSL_INCLUDE_DIR})
+find_package(OpenSSL REQUIRED)
set(DYNAMIC_LIB
- ${CMAKE_THREAD_LIBS_INIT}
+ Threads::Threads
${GFLAGS_LIBRARY}
${PROTOBUF_LIBRARIES}
${LEVELDB_LIB}
@@ -126,7 +102,9 @@ if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
endif()
add_executable(nshead_pb_extension_client client.cpp ${PROTO_SRC}
${PROTO_HEADER})
+brpc_example_configure_target(nshead_pb_extension_client)
add_executable(nshead_pb_extension_server server.cpp ${PROTO_SRC}
${PROTO_HEADER})
+brpc_example_configure_target(nshead_pb_extension_server)
-target_link_libraries(nshead_pb_extension_client ${BRPC_LIB} ${DYNAMIC_LIB})
-target_link_libraries(nshead_pb_extension_server ${BRPC_LIB} ${DYNAMIC_LIB})
+target_link_libraries(nshead_pb_extension_client PRIVATE ${BRPC_LIB}
${DYNAMIC_LIB})
+target_link_libraries(nshead_pb_extension_server PRIVATE ${BRPC_LIB}
${DYNAMIC_LIB})
diff --git a/example/parallel_echo_c++/CMakeLists.txt
b/example/parallel_echo_c++/CMakeLists.txt
index 7cdb412a..9fe5e661 100644
--- a/example/parallel_echo_c++/CMakeLists.txt
+++ b/example/parallel_echo_c++/CMakeLists.txt
@@ -15,9 +15,11 @@
# specific language governing permissions and limitations
# under the License.
-cmake_minimum_required(VERSION 2.8.10)
+cmake_minimum_required(VERSION 3.16...3.28)
project(parallel_echo_c++ C CXX)
+include(${CMAKE_CURRENT_LIST_DIR}/../cmake/BrpcExample.cmake)
+
option(LINK_SO "Whether examples are linked dynamically" OFF)
execute_process(
@@ -25,13 +27,13 @@ execute_process(
OUTPUT_VARIABLE OUTPUT_PATH
)
-set(CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+if(OUTPUT_PATH)
+ list(PREPEND CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+endif()
-include(FindThreads)
-include(FindProtobuf)
+find_package(Threads REQUIRED)
+find_package(Protobuf REQUIRED)
protobuf_generate_cpp(PROTO_SRC PROTO_HEADER echo.proto)
-# include PROTO_HEADER
-include_directories(${CMAKE_CURRENT_BINARY_DIR})
# Search for libthrift* by best effort. If it is not found and brpc is
# compiled with thrift protocol enabled, a link error would be reported.
@@ -42,7 +44,6 @@ endif()
find_path(GPERFTOOLS_INCLUDE_DIR NAMES gperftools/heap-profiler.h)
find_library(GPERFTOOLS_LIBRARIES NAMES tcmalloc_and_profiler)
-include_directories(${GPERFTOOLS_INCLUDE_DIR})
find_path(BRPC_INCLUDE_PATH NAMES brpc/server.h)
if(LINK_SO)
@@ -53,57 +54,31 @@ endif()
if((NOT BRPC_INCLUDE_PATH) OR (NOT BRPC_LIB))
message(FATAL_ERROR "Fail to find brpc")
endif()
-include_directories(${BRPC_INCLUDE_PATH})
find_path(GFLAGS_INCLUDE_PATH gflags/gflags.h)
find_library(GFLAGS_LIBRARY NAMES gflags libgflags)
if((NOT GFLAGS_INCLUDE_PATH) OR (NOT GFLAGS_LIBRARY))
message(FATAL_ERROR "Fail to find gflags")
endif()
-include_directories(${GFLAGS_INCLUDE_PATH})
-
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
- include(CheckFunctionExists)
- CHECK_FUNCTION_EXISTS(clock_gettime HAVE_CLOCK_GETTIME)
- if(NOT HAVE_CLOCK_GETTIME)
- set(DEFINE_CLOCK_GETTIME "-DNO_CLOCK_GETTIME_IN_MAC")
- endif()
-endif()
-set(CMAKE_CXX_FLAGS "${DEFINE_CLOCK_GETTIME} -DNDEBUG -O2
-D__const__=__unused__ -pipe -W -Wall -Wno-unused-parameter -fPIC
-fno-omit-frame-pointer")
-set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -DBRPC_ENABLE_CPU_PROFILER")
-
-if(CMAKE_VERSION VERSION_LESS "3.1.3")
- if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
- if(CMAKE_CXX_COMPILER_ID STREQUAL "Clang")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
-else()
- set(CMAKE_CXX_STANDARD 11)
- set(CMAKE_CXX_STANDARD_REQUIRED ON)
-endif()
+set(BRPC_EXAMPLE_ENABLE_CPU_PROFILER ON)
find_path(LEVELDB_INCLUDE_PATH NAMES leveldb/db.h)
find_library(LEVELDB_LIB NAMES leveldb)
if ((NOT LEVELDB_INCLUDE_PATH) OR (NOT LEVELDB_LIB))
message(FATAL_ERROR "Fail to find leveldb")
endif()
-include_directories(${LEVELDB_INCLUDE_PATH})
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
+if(CMAKE_SYSTEM_NAME STREQUAL "Darwin" AND NOT OPENSSL_ROOT_DIR)
set(OPENSSL_ROOT_DIR
"/usr/local/opt/openssl" # Homebrew installed OpenSSL
)
endif()
-find_package(OpenSSL)
-include_directories(${OPENSSL_INCLUDE_DIR})
-
+find_package(OpenSSL REQUIRED)
set(DYNAMIC_LIB
- ${CMAKE_THREAD_LIBS_INIT}
+ Threads::Threads
${GFLAGS_LIBRARY}
${PROTOBUF_LIBRARIES}
${LEVELDB_LIB}
@@ -132,7 +107,9 @@ if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
endif()
add_executable(parallel_echo_client client.cpp ${PROTO_SRC} ${PROTO_HEADER})
+brpc_example_configure_target(parallel_echo_client)
add_executable(parallel_echo_server server.cpp ${PROTO_SRC} ${PROTO_HEADER})
+brpc_example_configure_target(parallel_echo_server)
-target_link_libraries(parallel_echo_client ${BRPC_LIB} ${DYNAMIC_LIB}
${GPERFTOOLS_LIBRARIES})
-target_link_libraries(parallel_echo_server ${BRPC_LIB} ${DYNAMIC_LIB}
${GPERFTOOLS_LIBRARIES})
+target_link_libraries(parallel_echo_client PRIVATE ${BRPC_LIB} ${DYNAMIC_LIB}
${GPERFTOOLS_LIBRARIES})
+target_link_libraries(parallel_echo_server PRIVATE ${BRPC_LIB} ${DYNAMIC_LIB}
${GPERFTOOLS_LIBRARIES})
diff --git a/example/partition_echo_c++/CMakeLists.txt
b/example/partition_echo_c++/CMakeLists.txt
index 4d845c72..0501f5c8 100644
--- a/example/partition_echo_c++/CMakeLists.txt
+++ b/example/partition_echo_c++/CMakeLists.txt
@@ -15,9 +15,11 @@
# specific language governing permissions and limitations
# under the License.
-cmake_minimum_required(VERSION 2.8.10)
+cmake_minimum_required(VERSION 3.16...3.28)
project(partition_echo_c++ C CXX)
+include(${CMAKE_CURRENT_LIST_DIR}/../cmake/BrpcExample.cmake)
+
option(LINK_SO "Whether examples are linked dynamically" OFF)
execute_process(
@@ -25,13 +27,13 @@ execute_process(
OUTPUT_VARIABLE OUTPUT_PATH
)
-set(CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+if(OUTPUT_PATH)
+ list(PREPEND CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+endif()
-include(FindThreads)
-include(FindProtobuf)
+find_package(Threads REQUIRED)
+find_package(Protobuf REQUIRED)
protobuf_generate_cpp(PROTO_SRC PROTO_HEADER echo.proto)
-# include PROTO_HEADER
-include_directories(${CMAKE_CURRENT_BINARY_DIR})
# Search for libthrift* by best effort. If it is not found and brpc is
# compiled with thrift protocol enabled, a link error would be reported.
@@ -42,7 +44,6 @@ endif()
find_path(GPERFTOOLS_INCLUDE_DIR NAMES gperftools/heap-profiler.h)
find_library(GPERFTOOLS_LIBRARIES NAMES tcmalloc_and_profiler)
-include_directories(${GPERFTOOLS_INCLUDE_DIR})
find_path(BRPC_INCLUDE_PATH NAMES brpc/server.h)
if(LINK_SO)
@@ -53,57 +54,31 @@ endif()
if((NOT BRPC_INCLUDE_PATH) OR (NOT BRPC_LIB))
message(FATAL_ERROR "Fail to find brpc")
endif()
-include_directories(${BRPC_INCLUDE_PATH})
find_path(GFLAGS_INCLUDE_PATH gflags/gflags.h)
find_library(GFLAGS_LIBRARY NAMES gflags libgflags)
if((NOT GFLAGS_INCLUDE_PATH) OR (NOT GFLAGS_LIBRARY))
message(FATAL_ERROR "Fail to find gflags")
endif()
-include_directories(${GFLAGS_INCLUDE_PATH})
-
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
- include(CheckFunctionExists)
- CHECK_FUNCTION_EXISTS(clock_gettime HAVE_CLOCK_GETTIME)
- if(NOT HAVE_CLOCK_GETTIME)
- set(DEFINE_CLOCK_GETTIME "-DNO_CLOCK_GETTIME_IN_MAC")
- endif()
-endif()
-set(CMAKE_CXX_FLAGS "${DEFINE_CLOCK_GETTIME} -DNDEBUG -O2
-D__const__=__unused__ -pipe -W -Wall -Wno-unused-parameter -fPIC
-fno-omit-frame-pointer")
-set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -DBRPC_ENABLE_CPU_PROFILER")
-
-if(CMAKE_VERSION VERSION_LESS "3.1.3")
- if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
- if(CMAKE_CXX_COMPILER_ID STREQUAL "Clang")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
-else()
- set(CMAKE_CXX_STANDARD 11)
- set(CMAKE_CXX_STANDARD_REQUIRED ON)
-endif()
+set(BRPC_EXAMPLE_ENABLE_CPU_PROFILER ON)
find_path(LEVELDB_INCLUDE_PATH NAMES leveldb/db.h)
find_library(LEVELDB_LIB NAMES leveldb)
if ((NOT LEVELDB_INCLUDE_PATH) OR (NOT LEVELDB_LIB))
message(FATAL_ERROR "Fail to find leveldb")
endif()
-include_directories(${LEVELDB_INCLUDE_PATH})
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
+if(CMAKE_SYSTEM_NAME STREQUAL "Darwin" AND NOT OPENSSL_ROOT_DIR)
set(OPENSSL_ROOT_DIR
"/usr/local/opt/openssl" # Homebrew installed OpenSSL
)
endif()
-find_package(OpenSSL)
-include_directories(${OPENSSL_INCLUDE_DIR})
-
+find_package(OpenSSL REQUIRED)
set(DYNAMIC_LIB
- ${CMAKE_THREAD_LIBS_INIT}
+ Threads::Threads
${GFLAGS_LIBRARY}
${PROTOBUF_LIBRARIES}
${LEVELDB_LIB}
@@ -132,10 +107,12 @@ if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
endif()
add_executable(client client.cpp ${PROTO_SRC} ${PROTO_HEADER})
+brpc_example_configure_target(client)
add_executable(server server.cpp ${PROTO_SRC} ${PROTO_HEADER})
+brpc_example_configure_target(server)
-target_link_libraries(client ${BRPC_LIB} ${DYNAMIC_LIB}
${GPERFTOOLS_LIBRARIES})
-target_link_libraries(server ${BRPC_LIB} ${DYNAMIC_LIB}
${GPERFTOOLS_LIBRARIES})
+target_link_libraries(client PRIVATE ${BRPC_LIB} ${DYNAMIC_LIB}
${GPERFTOOLS_LIBRARIES})
+target_link_libraries(server PRIVATE ${BRPC_LIB} ${DYNAMIC_LIB}
${GPERFTOOLS_LIBRARIES})
file(COPY ${PROJECT_SOURCE_DIR}/server_list
DESTINATION ${CMAKE_CURRENT_BINARY_DIR})
diff --git a/example/rdma_performance/CMakeLists.txt
b/example/rdma_performance/CMakeLists.txt
index 2812b0b0..02b20a5d 100644
--- a/example/rdma_performance/CMakeLists.txt
+++ b/example/rdma_performance/CMakeLists.txt
@@ -15,9 +15,11 @@
# specific language governing permissions and limitations
# under the License.
-cmake_minimum_required(VERSION 2.8.10)
+cmake_minimum_required(VERSION 3.16...3.28)
project(rdma_performance C CXX)
+include(${CMAKE_CURRENT_LIST_DIR}/../cmake/BrpcExample.cmake)
+
option(LINK_SO "Whether examples are linked dynamically" OFF)
execute_process(
@@ -25,13 +27,13 @@ execute_process(
OUTPUT_VARIABLE OUTPUT_PATH
)
-set(CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+if(OUTPUT_PATH)
+ list(PREPEND CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+endif()
-include(FindThreads)
-include(FindProtobuf)
+find_package(Threads REQUIRED)
+find_package(Protobuf REQUIRED)
protobuf_generate_cpp(PROTO_SRC PROTO_HEADER test.proto)
-# include PROTO_HEADER
-include_directories(${CMAKE_CURRENT_BINARY_DIR})
# Search for libthrift* by best effort. If it is not found and brpc is
# compiled with thrift protocol enabled, a link error would be reported.
@@ -49,53 +51,28 @@ endif()
if((NOT BRPC_INCLUDE_PATH) OR (NOT BRPC_LIB))
message(FATAL_ERROR "Fail to find brpc")
endif()
-include_directories(${BRPC_INCLUDE_PATH})
find_path(GFLAGS_INCLUDE_PATH gflags/gflags.h)
find_library(GFLAGS_LIBRARY NAMES gflags libgflags)
if((NOT GFLAGS_INCLUDE_PATH) OR (NOT GFLAGS_LIBRARY))
message(FATAL_ERROR "Fail to find gflags")
endif()
-include_directories(${GFLAGS_INCLUDE_PATH})
-
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
- include(CheckFunctionExists)
- CHECK_FUNCTION_EXISTS(clock_gettime HAVE_CLOCK_GETTIME)
- if(NOT HAVE_CLOCK_GETTIME)
- set(DEFINE_CLOCK_GETTIME "-DNO_CLOCK_GETTIME_IN_MAC")
- endif()
-endif()
-set(CMAKE_CPP_FLAGS "${DEFINE_CLOCK_GETTIME} -DBRPC_WITH_RDMA=1")
-set(CMAKE_CXX_FLAGS "${CMAKE_CPP_FLAGS} -DNDEBUG -O2 -D__const__=__unused__
-pipe -W -Wall -Wno-unused-parameter -fPIC -fno-omit-frame-pointer")
-
-if(CMAKE_VERSION VERSION_LESS "3.1.3")
- if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
- if(CMAKE_CXX_COMPILER_ID STREQUAL "Clang")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
-else()
- set(CMAKE_CXX_STANDARD 11)
- set(CMAKE_CXX_STANDARD_REQUIRED ON)
-endif()
+set(BRPC_EXAMPLE_WITH_RDMA ON)
find_path(LEVELDB_INCLUDE_PATH NAMES leveldb/db.h)
find_library(LEVELDB_LIB NAMES leveldb)
if ((NOT LEVELDB_INCLUDE_PATH) OR (NOT LEVELDB_LIB))
message(FATAL_ERROR "Fail to find leveldb")
endif()
-include_directories(${LEVELDB_INCLUDE_PATH})
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
+if(CMAKE_SYSTEM_NAME STREQUAL "Darwin" AND NOT OPENSSL_ROOT_DIR)
set(OPENSSL_ROOT_DIR
"/usr/local/opt/openssl" # Homebrew installed OpenSSL
)
endif()
-find_package(OpenSSL)
-include_directories(${OPENSSL_INCLUDE_DIR})
+find_package(OpenSSL REQUIRED)
find_path(RDMA_INCLUDE_PATH NAMES infiniband/verbs.h)
find_library(RDMA_LIB NAMES ibverbs)
@@ -104,7 +81,7 @@ if ((NOT RDMA_INCLUDE_PATH) OR (NOT RDMA_LIB))
endif()
set(DYNAMIC_LIB
- ${CMAKE_THREAD_LIBS_INIT}
+ Threads::Threads
${GFLAGS_LIBRARY}
${PROTOBUF_LIBRARIES}
${LEVELDB_LIB}
@@ -133,7 +110,9 @@ if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
endif()
add_executable(client client.cpp ${PROTO_SRC} ${PROTO_HEADER})
+brpc_example_configure_target(client)
add_executable(server server.cpp ${PROTO_SRC} ${PROTO_HEADER})
+brpc_example_configure_target(server)
-target_link_libraries(client ${BRPC_LIB} ${DYNAMIC_LIB})
-target_link_libraries(server ${BRPC_LIB} ${DYNAMIC_LIB})
+target_link_libraries(client PRIVATE ${BRPC_LIB} ${DYNAMIC_LIB})
+target_link_libraries(server PRIVATE ${BRPC_LIB} ${DYNAMIC_LIB})
diff --git a/example/redis_c++/CMakeLists.txt b/example/redis_c++/CMakeLists.txt
index af3bd591..93a9cce7 100644
--- a/example/redis_c++/CMakeLists.txt
+++ b/example/redis_c++/CMakeLists.txt
@@ -15,9 +15,11 @@
# specific language governing permissions and limitations
# under the License.
-cmake_minimum_required(VERSION 2.8.10)
+cmake_minimum_required(VERSION 3.16...3.28)
project(redis_c++ C CXX)
+include(${CMAKE_CURRENT_LIST_DIR}/../cmake/BrpcExample.cmake)
+
# Install dependencies:
# With apt:
# sudo apt-get install libreadline-dev
@@ -33,14 +35,15 @@ execute_process(
OUTPUT_VARIABLE OUTPUT_PATH
)
-set(CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+if(OUTPUT_PATH)
+ list(PREPEND CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+endif()
-include(FindThreads)
-include(FindProtobuf)
+find_package(Threads REQUIRED)
+find_package(Protobuf REQUIRED)
find_path(GPERFTOOLS_INCLUDE_DIR NAMES gperftools/heap-profiler.h)
find_library(GPERFTOOLS_LIBRARIES NAMES tcmalloc_and_profiler)
-include_directories(${GPERFTOOLS_INCLUDE_DIR})
# Search for libthrift* by best effort. If it is not found and brpc is
# compiled with thrift protocol enabled, a link error would be reported.
@@ -58,55 +61,29 @@ endif()
if((NOT BRPC_INCLUDE_PATH) OR (NOT BRPC_LIB))
message(FATAL_ERROR "Fail to find brpc")
endif()
-include_directories(${BRPC_INCLUDE_PATH})
find_path(GFLAGS_INCLUDE_PATH gflags/gflags.h)
find_library(GFLAGS_LIBRARY NAMES gflags libgflags)
if((NOT GFLAGS_INCLUDE_PATH) OR (NOT GFLAGS_LIBRARY))
message(FATAL_ERROR "Fail to find gflags")
endif()
-include_directories(${GFLAGS_INCLUDE_PATH})
-
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
- include(CheckFunctionExists)
- CHECK_FUNCTION_EXISTS(clock_gettime HAVE_CLOCK_GETTIME)
- if(NOT HAVE_CLOCK_GETTIME)
- set(DEFINE_CLOCK_GETTIME "-DNO_CLOCK_GETTIME_IN_MAC")
- endif()
-endif()
-
-set(CMAKE_CXX_FLAGS "${DEFINE_CLOCK_GETTIME} -DNDEBUG -O2
-D__const__=__unused__ -pipe -W -Wall -Wno-unused-parameter -fPIC
-fno-omit-frame-pointer")
-
-if(CMAKE_VERSION VERSION_LESS "3.1.3")
- if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
- if(CMAKE_CXX_COMPILER_ID STREQUAL "Clang")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
-else()
- set(CMAKE_CXX_STANDARD 11)
- set(CMAKE_CXX_STANDARD_REQUIRED ON)
-endif()
find_path(LEVELDB_INCLUDE_PATH NAMES leveldb/db.h)
find_library(LEVELDB_LIB NAMES leveldb)
if ((NOT LEVELDB_INCLUDE_PATH) OR (NOT LEVELDB_LIB))
message(FATAL_ERROR "Fail to find leveldb")
endif()
-include_directories(${LEVELDB_INCLUDE_PATH})
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
+if(CMAKE_SYSTEM_NAME STREQUAL "Darwin" AND NOT OPENSSL_ROOT_DIR)
set(OPENSSL_ROOT_DIR
"/usr/local/opt/openssl" # Homebrew installed OpenSSL
)
endif()
-find_package(OpenSSL)
-include_directories(${OPENSSL_INCLUDE_DIR})
+find_package(OpenSSL REQUIRED)
set(DYNAMIC_LIB
- ${CMAKE_THREAD_LIBS_INIT}
+ Threads::Threads
${GFLAGS_LIBRARY}
${PROTOBUF_LIBRARIES}
${LEVELDB_LIB}
@@ -136,13 +113,17 @@ if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
endif()
add_executable(redis_cli redis_cli.cpp)
+brpc_example_configure_target(redis_cli)
add_executable(redis_press redis_press.cpp)
+brpc_example_configure_target(redis_press)
add_executable(redis_server redis_server.cpp)
+brpc_example_configure_target(redis_server)
add_executable(redis_cluster_client redis_cluster_client.cpp)
+brpc_example_configure_target(redis_cluster_client)
set(AUX_LIB readline ncurses)
-target_link_libraries(redis_cli ${BRPC_LIB} ${DYNAMIC_LIB} ${AUX_LIB})
-target_link_libraries(redis_press ${BRPC_LIB} ${DYNAMIC_LIB})
-target_link_libraries(redis_server ${BRPC_LIB} ${DYNAMIC_LIB})
-target_link_libraries(redis_cluster_client ${BRPC_LIB} ${DYNAMIC_LIB})
+target_link_libraries(redis_cli PRIVATE ${BRPC_LIB} ${DYNAMIC_LIB} ${AUX_LIB})
+target_link_libraries(redis_press PRIVATE ${BRPC_LIB} ${DYNAMIC_LIB})
+target_link_libraries(redis_server PRIVATE ${BRPC_LIB} ${DYNAMIC_LIB})
+target_link_libraries(redis_cluster_client PRIVATE ${BRPC_LIB} ${DYNAMIC_LIB})
diff --git a/example/rpcz_echo_c++/CMakeLists.txt
b/example/rpcz_echo_c++/CMakeLists.txt
index d1f1d924..9ca90dc8 100644
--- a/example/rpcz_echo_c++/CMakeLists.txt
+++ b/example/rpcz_echo_c++/CMakeLists.txt
@@ -15,9 +15,11 @@
# specific language governing permissions and limitations
# under the License.
-cmake_minimum_required(VERSION 2.8.10)
+cmake_minimum_required(VERSION 3.16...3.28)
project(rpcz_echo_c++ C CXX)
+include(${CMAKE_CURRENT_LIST_DIR}/../cmake/BrpcExample.cmake)
+
option(LINK_SO "Whether examples are linked dynamically" OFF)
execute_process(
@@ -25,13 +27,13 @@ execute_process(
OUTPUT_VARIABLE OUTPUT_PATH
)
-set(CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+if(OUTPUT_PATH)
+ list(PREPEND CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+endif()
-include(FindThreads)
-include(FindProtobuf)
+find_package(Threads REQUIRED)
+find_package(Protobuf REQUIRED)
protobuf_generate_cpp(PROTO_SRC PROTO_HEADER echo.proto)
-# include PROTO_HEADER
-include_directories(${CMAKE_CURRENT_BINARY_DIR})
# Search for libthrift* by best effort. If it is not found and brpc is
# compiled with thrift protocol enabled, a link error would be reported.
@@ -49,55 +51,29 @@ endif()
if((NOT BRPC_INCLUDE_PATH) OR (NOT BRPC_LIB))
message(FATAL_ERROR "Fail to find brpc")
endif()
-include_directories(${BRPC_INCLUDE_PATH})
find_path(GFLAGS_INCLUDE_PATH gflags/gflags.h)
find_library(GFLAGS_LIBRARY NAMES gflags libgflags)
if((NOT GFLAGS_INCLUDE_PATH) OR (NOT GFLAGS_LIBRARY))
message(FATAL_ERROR "Fail to find gflags")
endif()
-include_directories(${GFLAGS_INCLUDE_PATH})
-
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
- include(CheckFunctionExists)
- CHECK_FUNCTION_EXISTS(clock_gettime HAVE_CLOCK_GETTIME)
- if(NOT HAVE_CLOCK_GETTIME)
- set(DEFINE_CLOCK_GETTIME "-DNO_CLOCK_GETTIME_IN_MAC")
- endif()
-endif()
-
-set(CMAKE_CXX_FLAGS "${DEFINE_CLOCK_GETTIME} -DNDEBUG -O2
-D__const__=__unused__ -pipe -W -Wall -Wno-unused-parameter -fPIC
-fno-omit-frame-pointer")
-
-if(CMAKE_VERSION VERSION_LESS "3.1.3")
- if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
- if(CMAKE_CXX_COMPILER_ID STREQUAL "Clang")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
-else()
- set(CMAKE_CXX_STANDARD 11)
- set(CMAKE_CXX_STANDARD_REQUIRED ON)
-endif()
find_path(LEVELDB_INCLUDE_PATH NAMES leveldb/db.h)
find_library(LEVELDB_LIB NAMES leveldb)
if ((NOT LEVELDB_INCLUDE_PATH) OR (NOT LEVELDB_LIB))
message(FATAL_ERROR "Fail to find leveldb")
endif()
-include_directories(${LEVELDB_INCLUDE_PATH})
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
+if(CMAKE_SYSTEM_NAME STREQUAL "Darwin" AND NOT OPENSSL_ROOT_DIR)
set(OPENSSL_ROOT_DIR
"/usr/local/opt/openssl" # Homebrew installed OpenSSL
)
endif()
-find_package(OpenSSL)
-include_directories(${OPENSSL_INCLUDE_DIR})
+find_package(OpenSSL REQUIRED)
set(DYNAMIC_LIB
- ${CMAKE_THREAD_LIBS_INIT}
+ Threads::Threads
${GFLAGS_LIBRARY}
${PROTOBUF_LIBRARIES}
${LEVELDB_LIB}
@@ -126,8 +102,10 @@ if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
endif()
add_executable(rpcz_echo_client client.cpp ${PROTO_SRC} ${PROTO_HEADER})
+brpc_example_configure_target(rpcz_echo_client)
add_executable(rpcz_echo_server server.cpp ${PROTO_SRC} ${PROTO_HEADER})
+brpc_example_configure_target(rpcz_echo_server)
-target_link_libraries(rpcz_echo_client ${BRPC_LIB} ${DYNAMIC_LIB})
-target_link_libraries(rpcz_echo_server ${BRPC_LIB} ${DYNAMIC_LIB})
+target_link_libraries(rpcz_echo_client PRIVATE ${BRPC_LIB} ${DYNAMIC_LIB})
+target_link_libraries(rpcz_echo_server PRIVATE ${BRPC_LIB} ${DYNAMIC_LIB})
diff --git a/example/selective_echo_c++/CMakeLists.txt
b/example/selective_echo_c++/CMakeLists.txt
index 809bd22a..22990028 100644
--- a/example/selective_echo_c++/CMakeLists.txt
+++ b/example/selective_echo_c++/CMakeLists.txt
@@ -15,9 +15,11 @@
# specific language governing permissions and limitations
# under the License.
-cmake_minimum_required(VERSION 2.8.10)
+cmake_minimum_required(VERSION 3.16...3.28)
project(selective_echo_c++ C CXX)
+include(${CMAKE_CURRENT_LIST_DIR}/../cmake/BrpcExample.cmake)
+
option(LINK_SO "Whether examples are linked dynamically" OFF)
execute_process(
@@ -25,13 +27,13 @@ execute_process(
OUTPUT_VARIABLE OUTPUT_PATH
)
-set(CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+if(OUTPUT_PATH)
+ list(PREPEND CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+endif()
-include(FindThreads)
-include(FindProtobuf)
+find_package(Threads REQUIRED)
+find_package(Protobuf REQUIRED)
protobuf_generate_cpp(PROTO_SRC PROTO_HEADER echo.proto)
-# include PROTO_HEADER
-include_directories(${CMAKE_CURRENT_BINARY_DIR})
# Search for libthrift* by best effort. If it is not found and brpc is
# compiled with thrift protocol enabled, a link error would be reported.
@@ -42,7 +44,6 @@ endif()
find_path(GPERFTOOLS_INCLUDE_DIR NAMES gperftools/heap-profiler.h)
find_library(GPERFTOOLS_LIBRARIES NAMES tcmalloc_and_profiler)
-include_directories(${GPERFTOOLS_INCLUDE_DIR})
find_path(BRPC_INCLUDE_PATH NAMES brpc/server.h)
if(LINK_SO)
@@ -53,57 +54,31 @@ endif()
if((NOT BRPC_INCLUDE_PATH) OR (NOT BRPC_LIB))
message(FATAL_ERROR "Fail to find brpc")
endif()
-include_directories(${BRPC_INCLUDE_PATH})
find_path(GFLAGS_INCLUDE_PATH gflags/gflags.h)
find_library(GFLAGS_LIBRARY NAMES gflags libgflags)
if((NOT GFLAGS_INCLUDE_PATH) OR (NOT GFLAGS_LIBRARY))
message(FATAL_ERROR "Fail to find gflags")
endif()
-include_directories(${GFLAGS_INCLUDE_PATH})
-
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
- include(CheckFunctionExists)
- CHECK_FUNCTION_EXISTS(clock_gettime HAVE_CLOCK_GETTIME)
- if(NOT HAVE_CLOCK_GETTIME)
- set(DEFINE_CLOCK_GETTIME "-DNO_CLOCK_GETTIME_IN_MAC")
- endif()
-endif()
-set(CMAKE_CXX_FLAGS "${DEFINE_CLOCK_GETTIME} -DNDEBUG -O2
-D__const__=__unused__ -pipe -W -Wall -Wno-unused-parameter -fPIC
-fno-omit-frame-pointer")
-set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -DBRPC_ENABLE_CPU_PROFILER")
-
-if(CMAKE_VERSION VERSION_LESS "3.1.3")
- if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
- if(CMAKE_CXX_COMPILER_ID STREQUAL "Clang")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
-else()
- set(CMAKE_CXX_STANDARD 11)
- set(CMAKE_CXX_STANDARD_REQUIRED ON)
-endif()
+set(BRPC_EXAMPLE_ENABLE_CPU_PROFILER ON)
find_path(LEVELDB_INCLUDE_PATH NAMES leveldb/db.h)
find_library(LEVELDB_LIB NAMES leveldb)
if ((NOT LEVELDB_INCLUDE_PATH) OR (NOT LEVELDB_LIB))
message(FATAL_ERROR "Fail to find leveldb")
endif()
-include_directories(${LEVELDB_INCLUDE_PATH})
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
+if(CMAKE_SYSTEM_NAME STREQUAL "Darwin" AND NOT OPENSSL_ROOT_DIR)
set(OPENSSL_ROOT_DIR
"/usr/local/opt/openssl" # Homebrew installed OpenSSL
)
endif()
-find_package(OpenSSL)
-include_directories(${OPENSSL_INCLUDE_DIR})
-
+find_package(OpenSSL REQUIRED)
set(DYNAMIC_LIB
- ${CMAKE_THREAD_LIBS_INIT}
+ Threads::Threads
${GFLAGS_LIBRARY}
${PROTOBUF_LIBRARIES}
${LEVELDB_LIB}
@@ -132,7 +107,9 @@ if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
endif()
add_executable(selective_echo_client client.cpp ${PROTO_SRC} ${PROTO_HEADER})
+brpc_example_configure_target(selective_echo_client)
add_executable(selective_echo_server server.cpp ${PROTO_SRC} ${PROTO_HEADER})
+brpc_example_configure_target(selective_echo_server)
-target_link_libraries(selective_echo_client ${BRPC_LIB} ${DYNAMIC_LIB}
${GPERFTOOLS_LIBRARIES})
-target_link_libraries(selective_echo_server ${BRPC_LIB} ${DYNAMIC_LIB}
${GPERFTOOLS_LIBRARIES})
+target_link_libraries(selective_echo_client PRIVATE ${BRPC_LIB} ${DYNAMIC_LIB}
${GPERFTOOLS_LIBRARIES})
+target_link_libraries(selective_echo_server PRIVATE ${BRPC_LIB} ${DYNAMIC_LIB}
${GPERFTOOLS_LIBRARIES})
diff --git a/example/session_data_and_thread_local/CMakeLists.txt
b/example/session_data_and_thread_local/CMakeLists.txt
index 27f60e58..de2302ae 100644
--- a/example/session_data_and_thread_local/CMakeLists.txt
+++ b/example/session_data_and_thread_local/CMakeLists.txt
@@ -15,9 +15,11 @@
# specific language governing permissions and limitations
# under the License.
-cmake_minimum_required(VERSION 2.8.10)
+cmake_minimum_required(VERSION 3.16...3.28)
project(session_data_and_thread_local C CXX)
+include(${CMAKE_CURRENT_LIST_DIR}/../cmake/BrpcExample.cmake)
+
option(LINK_SO "Whether examples are linked dynamically" OFF)
execute_process(
@@ -25,13 +27,13 @@ execute_process(
OUTPUT_VARIABLE OUTPUT_PATH
)
-set(CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+if(OUTPUT_PATH)
+ list(PREPEND CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+endif()
-include(FindThreads)
-include(FindProtobuf)
+find_package(Threads REQUIRED)
+find_package(Protobuf REQUIRED)
protobuf_generate_cpp(PROTO_SRC PROTO_HEADER echo.proto)
-# include PROTO_HEADER
-include_directories(${CMAKE_CURRENT_BINARY_DIR})
# Search for libthrift* by best effort. If it is not found and brpc is
# compiled with thrift protocol enabled, a link error would be reported.
@@ -42,7 +44,6 @@ endif()
find_path(GPERFTOOLS_INCLUDE_DIR NAMES gperftools/heap-profiler.h)
find_library(GPERFTOOLS_LIBRARIES NAMES tcmalloc_and_profiler)
-include_directories(${GPERFTOOLS_INCLUDE_DIR})
find_path(BRPC_INCLUDE_PATH NAMES brpc/server.h)
if(LINK_SO)
@@ -53,58 +54,31 @@ endif()
if((NOT BRPC_INCLUDE_PATH) OR (NOT BRPC_LIB))
message(FATAL_ERROR "Fail to find brpc")
endif()
-include_directories(${BRPC_INCLUDE_PATH})
find_path(GFLAGS_INCLUDE_PATH gflags/gflags.h)
find_library(GFLAGS_LIBRARY NAMES gflags libgflags)
if((NOT GFLAGS_INCLUDE_PATH) OR (NOT GFLAGS_LIBRARY))
message(FATAL_ERROR "Fail to find gflags")
endif()
-include_directories(${GFLAGS_INCLUDE_PATH})
-
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
- include(CheckFunctionExists)
- CHECK_FUNCTION_EXISTS(clock_gettime HAVE_CLOCK_GETTIME)
- if(NOT HAVE_CLOCK_GETTIME)
- set(DEFINE_CLOCK_GETTIME "-DNO_CLOCK_GETTIME_IN_MAC")
- endif()
-endif()
-set(CMAKE_CXX_FLAGS "${DEFINE_CLOCK_GETTIME} -DNDEBUG -O2
-D__const__=__unused__ -pipe -W -Wall -Wno-unused-parameter -fPIC
-fno-omit-frame-pointer")
-set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -DBRPC_ENABLE_CPU_PROFILER")
-
-if(CMAKE_VERSION VERSION_LESS "3.1.3")
- if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
- if(CMAKE_CXX_COMPILER_ID STREQUAL "Clang")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
-else()
- set(CMAKE_CXX_STANDARD 11)
- set(CMAKE_CXX_STANDARD_REQUIRED ON)
-endif()
+set(BRPC_EXAMPLE_ENABLE_CPU_PROFILER ON)
find_path(LEVELDB_INCLUDE_PATH NAMES leveldb/db.h)
find_library(LEVELDB_LIB NAMES leveldb)
if ((NOT LEVELDB_INCLUDE_PATH) OR (NOT LEVELDB_LIB))
message(FATAL_ERROR "Fail to find leveldb")
endif()
-include_directories(${LEVELDB_INCLUDE_PATH})
find_path(LEVELDB_INCLUDE_PATH NAMES leveldb/db.h)
find_library(LEVELDB_LIB NAMES leveldb)
if ((NOT LEVELDB_INCLUDE_PATH) OR (NOT LEVELDB_LIB))
message(FATAL_ERROR "Fail to find leveldb")
endif()
-include_directories(${LEVELDB_INCLUDE_PATH})
-
-find_package(OpenSSL)
-include_directories(${OPENSSL_INCLUDE_DIR})
+find_package(OpenSSL REQUIRED)
set(DYNAMIC_LIB
- ${CMAKE_THREAD_LIBS_INIT}
+ Threads::Threads
${GFLAGS_LIBRARY}
${PROTOBUF_LIBRARIES}
${LEVELDB_LIB}
@@ -133,7 +107,9 @@ if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
endif()
add_executable(session_data_and_thread_local_client client.cpp ${PROTO_SRC}
${PROTO_HEADER})
+brpc_example_configure_target(session_data_and_thread_local_client)
add_executable(session_data_and_thread_local_server server.cpp ${PROTO_SRC}
${PROTO_HEADER})
+brpc_example_configure_target(session_data_and_thread_local_server)
-target_link_libraries(session_data_and_thread_local_client ${BRPC_LIB}
${DYNAMIC_LIB} ${GPERFTOOLS_LIBRARIES})
-target_link_libraries(session_data_and_thread_local_server ${BRPC_LIB}
${DYNAMIC_LIB} ${GPERFTOOLS_LIBRARIES})
+target_link_libraries(session_data_and_thread_local_client PRIVATE ${BRPC_LIB}
${DYNAMIC_LIB} ${GPERFTOOLS_LIBRARIES})
+target_link_libraries(session_data_and_thread_local_server PRIVATE ${BRPC_LIB}
${DYNAMIC_LIB} ${GPERFTOOLS_LIBRARIES})
diff --git a/example/streaming_batch_echo_c++/CMakeLists.txt
b/example/streaming_batch_echo_c++/CMakeLists.txt
index c4340672..f0093356 100644
--- a/example/streaming_batch_echo_c++/CMakeLists.txt
+++ b/example/streaming_batch_echo_c++/CMakeLists.txt
@@ -15,9 +15,11 @@
# specific language governing permissions and limitations
# under the License.
-cmake_minimum_required(VERSION 2.8.10)
+cmake_minimum_required(VERSION 3.16...3.28)
project(streaming_batch_echo_c++ C CXX)
+include(${CMAKE_CURRENT_LIST_DIR}/../cmake/BrpcExample.cmake)
+
option(LINK_SO "Whether examples are linked dynamically" OFF)
execute_process(
@@ -25,13 +27,13 @@ execute_process(
OUTPUT_VARIABLE OUTPUT_PATH
)
-set(CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+if(OUTPUT_PATH)
+ list(PREPEND CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+endif()
-include(FindThreads)
-include(FindProtobuf)
+find_package(Threads REQUIRED)
+find_package(Protobuf REQUIRED)
protobuf_generate_cpp(PROTO_SRC PROTO_HEADER echo.proto)
-# include PROTO_HEADER
-include_directories(${CMAKE_CURRENT_BINARY_DIR})
# Search for libthrift* by best effort. If it is not found and brpc is
# compiled with thrift protocol enabled, a link error would be reported.
@@ -49,55 +51,29 @@ endif()
if((NOT BRPC_INCLUDE_PATH) OR (NOT BRPC_LIB))
message(FATAL_ERROR "Fail to find brpc")
endif()
-include_directories(${BRPC_INCLUDE_PATH})
find_path(GFLAGS_INCLUDE_PATH gflags/gflags.h)
find_library(GFLAGS_LIBRARY NAMES gflags libgflags)
if((NOT GFLAGS_INCLUDE_PATH) OR (NOT GFLAGS_LIBRARY))
message(FATAL_ERROR "Fail to find gflags")
endif()
-include_directories(${GFLAGS_INCLUDE_PATH})
-
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
- include(CheckFunctionExists)
- CHECK_FUNCTION_EXISTS(clock_gettime HAVE_CLOCK_GETTIME)
- if(NOT HAVE_CLOCK_GETTIME)
- set(DEFINE_CLOCK_GETTIME "-DNO_CLOCK_GETTIME_IN_MAC")
- endif()
-endif()
-
-set(CMAKE_CXX_FLAGS "${DEFINE_CLOCK_GETTIME} -DNDEBUG -O2
-D__const__=__unused__ -pipe -W -Wall -Wno-unused-parameter -fPIC
-fno-omit-frame-pointer")
-
-if(CMAKE_VERSION VERSION_LESS "3.1.3")
- if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
- if(CMAKE_CXX_COMPILER_ID STREQUAL "Clang")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
-else()
- set(CMAKE_CXX_STANDARD 11)
- set(CMAKE_CXX_STANDARD_REQUIRED ON)
-endif()
find_path(LEVELDB_INCLUDE_PATH NAMES leveldb/db.h)
find_library(LEVELDB_LIB NAMES leveldb)
if ((NOT LEVELDB_INCLUDE_PATH) OR (NOT LEVELDB_LIB))
message(FATAL_ERROR "Fail to find leveldb")
endif()
-include_directories(${LEVELDB_INCLUDE_PATH})
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
+if(CMAKE_SYSTEM_NAME STREQUAL "Darwin" AND NOT OPENSSL_ROOT_DIR)
set(OPENSSL_ROOT_DIR
- "/usr/local/opt/openssl" # Homebrew installed OpenSSL
- )
+ "/usr/local/opt/openssl" # Homebrew installed OpenSSL
+ )
endif()
-find_package(OpenSSL)
-include_directories(${OPENSSL_INCLUDE_DIR})
+find_package(OpenSSL REQUIRED)
set(DYNAMIC_LIB
- ${CMAKE_THREAD_LIBS_INIT}
+ Threads::Threads
${GFLAGS_LIBRARY}
${PROTOBUF_LIBRARIES}
${LEVELDB_LIB}
@@ -123,7 +99,9 @@ if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
endif()
add_executable(streaming_batch_echo_client client.cpp ${PROTO_SRC}
${PROTO_HEADER})
+brpc_example_configure_target(streaming_batch_echo_client)
add_executable(streaming_batch_echo_server server.cpp ${PROTO_SRC}
${PROTO_HEADER})
+brpc_example_configure_target(streaming_batch_echo_server)
-target_link_libraries(streaming_batch_echo_client ${BRPC_LIB} ${DYNAMIC_LIB})
-target_link_libraries(streaming_batch_echo_server ${BRPC_LIB} ${DYNAMIC_LIB})
+target_link_libraries(streaming_batch_echo_client PRIVATE ${BRPC_LIB}
${DYNAMIC_LIB})
+target_link_libraries(streaming_batch_echo_server PRIVATE ${BRPC_LIB}
${DYNAMIC_LIB})
diff --git a/example/streaming_echo_c++/CMakeLists.txt
b/example/streaming_echo_c++/CMakeLists.txt
index 571991e0..47f9373f 100644
--- a/example/streaming_echo_c++/CMakeLists.txt
+++ b/example/streaming_echo_c++/CMakeLists.txt
@@ -15,9 +15,11 @@
# specific language governing permissions and limitations
# under the License.
-cmake_minimum_required(VERSION 2.8.10)
+cmake_minimum_required(VERSION 3.16...3.28)
project(streaming_echo_c++ C CXX)
+include(${CMAKE_CURRENT_LIST_DIR}/../cmake/BrpcExample.cmake)
+
option(LINK_SO "Whether examples are linked dynamically" OFF)
execute_process(
@@ -25,13 +27,13 @@ execute_process(
OUTPUT_VARIABLE OUTPUT_PATH
)
-set(CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+if(OUTPUT_PATH)
+ list(PREPEND CMAKE_PREFIX_PATH ${OUTPUT_PATH})
+endif()
-include(FindThreads)
-include(FindProtobuf)
+find_package(Threads REQUIRED)
+find_package(Protobuf REQUIRED)
protobuf_generate_cpp(PROTO_SRC PROTO_HEADER echo.proto)
-# include PROTO_HEADER
-include_directories(${CMAKE_CURRENT_BINARY_DIR})
# Search for libthrift* by best effort. If it is not found and brpc is
# compiled with thrift protocol enabled, a link error would be reported.
@@ -49,55 +51,29 @@ endif()
if((NOT BRPC_INCLUDE_PATH) OR (NOT BRPC_LIB))
message(FATAL_ERROR "Fail to find brpc")
endif()
-include_directories(${BRPC_INCLUDE_PATH})
find_path(GFLAGS_INCLUDE_PATH gflags/gflags.h)
find_library(GFLAGS_LIBRARY NAMES gflags libgflags)
if((NOT GFLAGS_INCLUDE_PATH) OR (NOT GFLAGS_LIBRARY))
message(FATAL_ERROR "Fail to find gflags")
endif()
-include_directories(${GFLAGS_INCLUDE_PATH})
-
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
- include(CheckFunctionExists)
- CHECK_FUNCTION_EXISTS(clock_gettime HAVE_CLOCK_GETTIME)
- if(NOT HAVE_CLOCK_GETTIME)
- set(DEFINE_CLOCK_GETTIME "-DNO_CLOCK_GETTIME_IN_MAC")
- endif()
-endif()
-
-set(CMAKE_CXX_FLAGS "${DEFINE_CLOCK_GETTIME} -DNDEBUG -O2
-D__const__=__unused__ -pipe -W -Wall -Wno-unused-parameter -fPIC
-fno-omit-frame-pointer")
-
-if(CMAKE_VERSION VERSION_LESS "3.1.3")
- if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
- if(CMAKE_CXX_COMPILER_ID STREQUAL "Clang")
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
- endif()
-else()
- set(CMAKE_CXX_STANDARD 11)
- set(CMAKE_CXX_STANDARD_REQUIRED ON)
-endif()
find_path(LEVELDB_INCLUDE_PATH NAMES leveldb/db.h)
find_library(LEVELDB_LIB NAMES leveldb)
if ((NOT LEVELDB_INCLUDE_PATH) OR (NOT LEVELDB_LIB))
message(FATAL_ERROR "Fail to find leveldb")
endif()
-include_directories(${LEVELDB_INCLUDE_PATH})
-if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
+if(CMAKE_SYSTEM_NAME STREQUAL "Darwin" AND NOT OPENSSL_ROOT_DIR)
set(OPENSSL_ROOT_DIR
"/usr/local/opt/openssl" # Homebrew installed OpenSSL
)
endif()
-find_package(OpenSSL)
-include_directories(${OPENSSL_INCLUDE_DIR})
+find_package(OpenSSL REQUIRED)
set(DYNAMIC_LIB
- ${CMAKE_THREAD_LIBS_INIT}
+ Threads::Threads
${GFLAGS_LIBRARY}
${PROTOBUF_LIBRARIES}
${LEVELDB_LIB}
@@ -126,7 +102,9 @@ if(CMAKE_SYSTEM_NAME STREQUAL "Darwin")
endif()
add_executable(streaming_echo_client client.cpp ${PROTO_SRC} ${PROTO_HEADER})
+brpc_example_configure_target(streaming_echo_client)
add_executable(streaming_echo_server server.cpp ${PROTO_SRC} ${PROTO_HEADER})
+brpc_example_configure_target(streaming_echo_server)
-target_link_libraries(streaming_echo_client ${BRPC_LIB} ${DYNAMIC_LIB})
-target_link_libraries(streaming_echo_server ${BRPC_LIB} ${DYNAMIC_LIB})
+target_link_libraries(streaming_echo_client PRIVATE ${BRPC_LIB} ${DYNAMIC_LIB})
+target_link_libraries(streaming_echo_server PRIVATE ${BRPC_LIB} ${DYNAMIC_LIB})
diff --git a/src/CMakeLists.txt b/src/CMakeLists.txt
index 1b4b2332..a9a4d11f 100644
--- a/src/CMakeLists.txt
+++ b/src/CMakeLists.txt
@@ -15,17 +15,11 @@
# specific language governing permissions and limitations
# under the License.
-if(NOT DEBUG)
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -DNDEBUG")
- set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DNDEBUG")
-endif()
-
-include_directories(${CMAKE_CURRENT_BINARY_DIR})
-include_directories(${PROJECT_SOURCE_DIR}/src)
-
add_library(BUTIL_LIB OBJECT ${BUTIL_SOURCES})
add_library(SOURCES_LIB OBJECT ${SOURCES})
add_dependencies(SOURCES_LIB PROTO_LIB)
+target_link_libraries(BUTIL_LIB PRIVATE brpc_common_config)
+target_link_libraries(SOURCES_LIB PRIVATE brpc_common_config)
# shared library needs POSITION_INDEPENDENT_CODE
set_property(TARGET ${SOURCES_LIB} PROPERTY POSITION_INDEPENDENT_CODE 1)
@@ -34,6 +28,7 @@ set_property(TARGET ${BUTIL_LIB} PROPERTY
POSITION_INDEPENDENT_CODE 1)
add_library(brpc-static STATIC $<TARGET_OBJECTS:BUTIL_LIB>
$<TARGET_OBJECTS:SOURCES_LIB>
$<TARGET_OBJECTS:PROTO_LIB>)
+target_link_libraries(brpc-static PUBLIC brpc_common_config)
function(check_thrift_version target_arg)
#use thrift command to get version
@@ -52,7 +47,7 @@ function(check_thrift_version target_arg)
if (THRIFT_MAJOR_VERSION EQUAL 0 AND THRIFT_MINOR_VERSION LESS 11)
message(STATUS "Thrift version is less than 0.11.0")
- target_compile_definitions($(target_arg) PRIVATE
_THRIFT_VERSION_LOWER_THAN_0_11_0_)
+ target_compile_definitions(${target_arg} PRIVATE
_THRIFT_VERSION_LOWER_THAN_0_11_0_)
else()
message(STATUS "Thrift version is equal to or greater than 0.11.0")
endif()
@@ -60,7 +55,7 @@ endfunction()
if(WITH_THRIFT)
- target_link_libraries(brpc-static ${THRIFT_LIB})
+ target_link_libraries(brpc-static PRIVATE ${THRIFT_LIB})
check_thrift_version(brpc-static)
endif()
@@ -74,22 +69,24 @@ set(protoc_gen_mcpack_SOURCES
)
add_executable(protoc-gen-mcpack ${protoc_gen_mcpack_SOURCES})
+target_link_libraries(protoc-gen-mcpack PRIVATE brpc_common_config)
if(BUILD_SHARED_LIBS)
add_library(brpc-shared SHARED $<TARGET_OBJECTS:BUTIL_LIB>
$<TARGET_OBJECTS:SOURCES_LIB>
$<TARGET_OBJECTS:PROTO_LIB>)
- target_link_libraries(brpc-shared ${DYNAMIC_LIB})
+ target_link_libraries(brpc-shared PUBLIC brpc_common_config)
+ target_link_libraries(brpc-shared PRIVATE ${DYNAMIC_LIB})
if(WITH_GLOG)
- target_link_libraries(brpc-shared ${GLOG_LIB})
+ target_link_libraries(brpc-shared PRIVATE ${GLOG_LIB})
endif()
if(WITH_THRIFT)
- target_link_libraries(brpc-shared ${THRIFT_LIB})
+ target_link_libraries(brpc-shared PRIVATE ${THRIFT_LIB})
check_thrift_version(brpc-shared)
endif()
SET_TARGET_PROPERTIES(brpc-shared PROPERTIES OUTPUT_NAME brpc
CLEAN_DIRECT_OUTPUT 1)
- target_link_libraries(protoc-gen-mcpack brpc-shared ${DYNAMIC_LIB} pthread)
+ target_link_libraries(protoc-gen-mcpack PRIVATE brpc-shared ${DYNAMIC_LIB}
pthread)
install(TARGETS brpc-shared
RUNTIME DESTINATION ${CMAKE_INSTALL_BINDIR}
@@ -97,7 +94,7 @@ if(BUILD_SHARED_LIBS)
ARCHIVE DESTINATION ${CMAKE_INSTALL_LIBDIR}
)
else()
- target_link_libraries(protoc-gen-mcpack brpc-static ${DYNAMIC_LIB} pthread)
+ target_link_libraries(protoc-gen-mcpack PRIVATE brpc-static ${DYNAMIC_LIB}
pthread)
endif()
diff --git a/test/CMakeLists.txt b/test/CMakeLists.txt
index cd149408..6aebe271 100644
--- a/test/CMakeLists.txt
+++ b/test/CMakeLists.txt
@@ -16,8 +16,18 @@
# under the License.
find_package(Gperftools)
-include_directories(${GPERFTOOLS_INCLUDE_DIR})
-include_directories(${CMAKE_CURRENT_BINARY_DIR})
+
+add_library(brpc_test_config INTERFACE)
+target_link_libraries(brpc_test_config INTERFACE brpc_common_config)
+target_include_directories(brpc_test_config INTERFACE
${CMAKE_CURRENT_BINARY_DIR})
+target_compile_definitions(brpc_test_config INTERFACE
+ UNIT_TEST
+ BVAR_NOT_LINK_DEFAULT_VARIABLES
+)
+target_compile_options(brpc_test_config INTERFACE -fno-access-control)
+if(GPERFTOOLS_INCLUDE_DIR)
+ target_include_directories(brpc_test_config INTERFACE
${GPERFTOOLS_INCLUDE_DIR})
+endif()
include(CompileProto)
set(TEST_PROTO_FILES addressbook1.proto
@@ -41,32 +51,27 @@ compile_proto(PROTO_HDRS PROTO_SRCS ${CMAKE_BINARY_DIR}/test
${CMAKE_SOURCE_DIR}/test
"${TEST_PROTO_FILES}")
add_library(TEST_PROTO_LIB OBJECT ${PROTO_SRCS} ${PROTO_HDRS})
+target_link_libraries(TEST_PROTO_LIB PRIVATE brpc_test_config)
set(BRPC_SYSTEM_GTEST_SOURCE_DIR "" CACHE PATH "System googletest source
directory.")
if(DOWNLOAD_GTEST)
include(SetupGtest)
+ set(BRPC_DOWNLOADED_GTEST_INCLUDE_DIR
${CMAKE_CURRENT_BINARY_DIR}/downloaded-googletest-include)
+ file(REMOVE_RECURSE ${BRPC_DOWNLOADED_GTEST_INCLUDE_DIR})
+ file(MAKE_DIRECTORY ${BRPC_DOWNLOADED_GTEST_INCLUDE_DIR})
+ file(COPY
+ ${PROJECT_BINARY_DIR}/googletest-src/googletest/include/
+ ${PROJECT_BINARY_DIR}/googletest-src/googlemock/include/
+ DESTINATION ${BRPC_DOWNLOADED_GTEST_INCLUDE_DIR})
+ target_include_directories(brpc_test_config BEFORE INTERFACE
+ ${BRPC_DOWNLOADED_GTEST_INCLUDE_DIR})
elseif(BRPC_SYSTEM_GTEST_SOURCE_DIR)
add_subdirectory("${BRPC_SYSTEM_GTEST_SOURCE_DIR}"
"${PROJECT_BINARY_DIR}/system-googletest-build")
else()
message(FATAL_ERROR "Googletest is not available")
endif()
-set(CMAKE_CPP_FLAGS "${CMAKE_CPP_FLAGS} ${DEFINE_CLOCK_GETTIME}
-DBRPC_WITH_GLOG=${WITH_GLOG_VAL} -DBRPC_WITH_RDMA=${WITH_RDMA_VAL}")
-set(CMAKE_CPP_FLAGS "${CMAKE_CPP_FLAGS} -DBTHREAD_USE_FAST_PTHREAD_MUTEX
-D__const__=__unused__ -D_GNU_SOURCE -DUSE_SYMBOLIZE -DNO_TCMALLOC
-D__STDC_FORMAT_MACROS -D__STDC_LIMIT_MACROS -D__STDC_CONSTANT_MACROS
-DUNIT_TEST -DBVAR_NOT_LINK_DEFAULT_VARIABLES -D__STRICT_ANSI__")
-set(CMAKE_CXX_FLAGS "${CMAKE_CPP_FLAGS} -g -O2 -pipe -Wall -W -fPIC
-fstrict-aliasing -Wno-invalid-offsetof -Wno-unused-parameter
-fno-omit-frame-pointer -fno-access-control")
-use_cxx11()
-
-if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
- #required by butil/crc32.cc to boost performance for 10x
- if((CMAKE_SYSTEM_PROCESSOR MATCHES "(x86)|(X86)|(amd64)|(AMD64)") AND NOT
(CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.4))
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -msse4 -msse4.2")
- endif()
- if(NOT (CMAKE_CXX_COMPILER_VERSION VERSION_LESS 7.0))
- set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wno-aligned-new")
- endif()
-endif()
-
file(COPY ${PROJECT_SOURCE_DIR}/test/cert1.key DESTINATION
${CMAKE_CURRENT_BINARY_DIR})
file(COPY ${PROJECT_SOURCE_DIR}/test/cert2.key DESTINATION
${CMAKE_CURRENT_BINARY_DIR})
file(COPY ${PROJECT_SOURCE_DIR}/test/cert1.crt DESTINATION
${CMAKE_CURRENT_BINARY_DIR})
@@ -199,6 +204,8 @@ endif()
add_library(BUTIL_DEBUG_LIB OBJECT ${BUTIL_SOURCES})
add_library(SOURCES_DEBUG_LIB OBJECT ${SOURCES})
add_dependencies(SOURCES_DEBUG_LIB PROTO_LIB)
+target_link_libraries(BUTIL_DEBUG_LIB PRIVATE brpc_test_config)
+target_link_libraries(SOURCES_DEBUG_LIB PRIVATE brpc_test_config)
# shared library needs POSITION_INDEPENDENT_CODE
set_property(TARGET ${BUTIL_DEBUG_LIB} PROPERTY POSITION_INDEPENDENT_CODE 1)
@@ -211,9 +218,9 @@ add_library(brpc-shared-debug SHARED
$<TARGET_OBJECTS:BUTIL_DEBUG_LIB>
set_target_properties(brpc-shared-debug PROPERTIES
LIBRARY_OUTPUT_DIRECTORY ${PROJECT_BINARY_DIR}/test)
-target_link_libraries(brpc-shared-debug ${DYNAMIC_LIB})
+target_link_libraries(brpc-shared-debug PUBLIC brpc_test_config ${DYNAMIC_LIB})
if(BRPC_WITH_GLOG)
- target_link_libraries(brpc-shared-debug ${GLOG_LIB})
+ target_link_libraries(brpc-shared-debug PUBLIC ${GLOG_LIB})
endif()
# AddressSanitizer is incompatible with tcmalloc/gperftools, do not link it
when WITH_ASAN is on
@@ -224,9 +231,10 @@ endif()
# test_butil
add_executable(test_butil ${TEST_BUTIL_SOURCES}
${CMAKE_CURRENT_BINARY_DIR}/iobuf.pb.cc)
-target_link_libraries(test_butil brpc-shared-debug
- gtest
- ${GPERFTOOLS_LIBRARIES})
+target_link_libraries(test_butil PRIVATE
+ brpc-shared-debug
+ gtest
+ ${GPERFTOOLS_LIBRARIES})
add_test(NAME test_butil COMMAND test_butil)
@@ -235,13 +243,16 @@ add_test(NAME test_butil COMMAND test_butil)
list(REMOVE_ITEM BVAR_SOURCES
${PROJECT_SOURCE_DIR}/src/bvar/default_variables.cpp)
add_library(BVAR_DEBUG_LIB OBJECT ${BVAR_SOURCES})
+target_link_libraries(BVAR_DEBUG_LIB PRIVATE brpc_test_config)
file(GLOB TEST_BVAR_SRCS "bvar_*_unittest.cpp")
add_executable(test_bvar ${TEST_BVAR_SRCS}
$<TARGET_OBJECTS:BVAR_DEBUG_LIB>
$<TARGET_OBJECTS:BUTIL_DEBUG_LIB>)
-target_link_libraries(test_bvar gtest
- ${GPERFTOOLS_LIBRARIES}
- ${DYNAMIC_LIB})
+target_link_libraries(test_bvar PRIVATE
+ gtest
+ brpc_test_config
+ ${GPERFTOOLS_LIBRARIES}
+ ${DYNAMIC_LIB})
add_test(NAME test_bvar COMMAND test_bvar)
# bthread tests
@@ -249,9 +260,10 @@ file(GLOB BTHREAD_UNITTESTS "bthread*unittest.cpp")
foreach(BTHREAD_UT ${BTHREAD_UNITTESTS})
get_filename_component(BTHREAD_UT_WE ${BTHREAD_UT} NAME_WE)
add_executable(${BTHREAD_UT_WE} ${BTHREAD_UT})
- target_link_libraries(${BTHREAD_UT_WE} gtest_main
- brpc-shared-debug
- ${GPERFTOOLS_LIBRARIES})
+ target_link_libraries(${BTHREAD_UT_WE} PRIVATE
+ gtest_main
+ brpc-shared-debug
+ ${GPERFTOOLS_LIBRARIES})
add_test(NAME ${BTHREAD_UT_WE} COMMAND ${BTHREAD_UT_WE})
endforeach()
@@ -260,9 +272,11 @@ file(GLOB BRPC_UNITTESTS "brpc_*_unittest.cpp")
foreach(BRPC_UT ${BRPC_UNITTESTS})
get_filename_component(BRPC_UT_WE ${BRPC_UT} NAME_WE)
add_executable(${BRPC_UT_WE} ${BRPC_UT} $<TARGET_OBJECTS:TEST_PROTO_LIB>)
- target_link_libraries(${BRPC_UT_WE} brpc-shared-debug
- gtest_main
- ${GPERFTOOLS_LIBRARIES})
+ target_link_libraries(${BRPC_UT_WE} PRIVATE
+ brpc-shared-debug
+ gtest_main
+ brpc_test_config
+ ${GPERFTOOLS_LIBRARIES})
add_test(NAME ${BRPC_UT_WE} COMMAND ${BRPC_UT_WE})
endforeach()
@@ -274,9 +288,9 @@ if(BUILD_FUZZ_TESTS)
set_target_properties(brpc-static-debug PROPERTIES
LIBRARY_OUTPUT_DIRECTORY ${PROJECT_BINARY_DIR}/test)
- target_link_libraries(brpc-static-debug ${DYNAMIC_LIB})
+ target_link_libraries(brpc-static-debug PUBLIC brpc_test_config
${DYNAMIC_LIB})
if(BRPC_WITH_GLOG)
- target_link_libraries(brpc-static-debug ${GLOG_LIB})
+ target_link_libraries(brpc-static-debug PUBLIC ${GLOG_LIB})
endif()
set(FUZZ_TARGETS fuzz_butil fuzz_esp fuzz_hpack fuzz_http
@@ -287,7 +301,7 @@ if(BUILD_FUZZ_TESTS)
foreach(target ${FUZZ_TARGETS})
add_executable(${target} fuzzing/${target}.cpp
$<TARGET_OBJECTS:TEST_PROTO_LIB>)
- target_link_libraries(${target} brpc-static-debug
${LIB_FUZZING_ENGINE})
+ target_link_libraries(${target} PRIVATE brpc-static-debug
${LIB_FUZZING_ENGINE})
set_target_properties(${target} PROPERTIES
BUILD_WITH_INSTALL_RPATH TRUE
INSTALL_RPATH "$ORIGIN/lib")
diff --git a/tools/parallel_http/CMakeLists.txt
b/tools/parallel_http/CMakeLists.txt
index 7099f3e4..69676444 100644
--- a/tools/parallel_http/CMakeLists.txt
+++ b/tools/parallel_http/CMakeLists.txt
@@ -16,5 +16,5 @@
# under the License.
add_executable(parallel_http parallel_http.cpp)
-target_link_libraries(parallel_http brpc-static ${DYNAMIC_LIB})
+target_link_libraries(parallel_http PRIVATE brpc-static ${DYNAMIC_LIB})
install(TARGETS parallel_http RUNTIME DESTINATION ${CMAKE_INSTALL_BINDIR})
diff --git a/tools/rpc_press/CMakeLists.txt b/tools/rpc_press/CMakeLists.txt
index bdcba5d5..762d3466 100644
--- a/tools/rpc_press/CMakeLists.txt
+++ b/tools/rpc_press/CMakeLists.txt
@@ -15,7 +15,7 @@
# specific language governing permissions and limitations
# under the License.
-file(GLOB SOURCES "${PROJECT_SOURCE_DIR}/tools/rpc_press/*.cpp")
+file(GLOB SOURCES CONFIGURE_DEPENDS
"${PROJECT_SOURCE_DIR}/tools/rpc_press/*.cpp")
add_executable(rpc_press ${SOURCES})
-target_link_libraries(rpc_press brpc-static ${DYNAMIC_LIB})
+target_link_libraries(rpc_press PRIVATE brpc-static ${DYNAMIC_LIB})
install(TARGETS rpc_press RUNTIME DESTINATION ${CMAKE_INSTALL_BINDIR})
diff --git a/tools/rpc_replay/CMakeLists.txt b/tools/rpc_replay/CMakeLists.txt
index 8278da28..f1a55abd 100644
--- a/tools/rpc_replay/CMakeLists.txt
+++ b/tools/rpc_replay/CMakeLists.txt
@@ -15,7 +15,7 @@
# specific language governing permissions and limitations
# under the License.
-file(GLOB SOURCES "${PROJECT_SOURCE_DIR}/tools/rpc_replay/*.cpp")
+file(GLOB SOURCES CONFIGURE_DEPENDS
"${PROJECT_SOURCE_DIR}/tools/rpc_replay/*.cpp")
add_executable(rpc_replay ${SOURCES})
-target_link_libraries(rpc_replay brpc-static ${DYNAMIC_LIB})
+target_link_libraries(rpc_replay PRIVATE brpc-static ${DYNAMIC_LIB})
install(TARGETS rpc_replay RUNTIME DESTINATION ${CMAKE_INSTALL_BINDIR})
diff --git a/tools/rpc_view/CMakeLists.txt b/tools/rpc_view/CMakeLists.txt
index 55a3bc5e..1fe67014 100644
--- a/tools/rpc_view/CMakeLists.txt
+++ b/tools/rpc_view/CMakeLists.txt
@@ -17,8 +17,8 @@
include(FindProtobuf)
protobuf_generate_cpp(PROTO_SRC PROTO_HEADER view.proto)
-include_directories(${CMAKE_CURRENT_BINARY_DIR})
add_executable(rpc_view rpc_view.cpp ${PROTO_SRC})
-target_link_libraries(rpc_view brpc-static ${DYNAMIC_LIB})
+target_include_directories(rpc_view PRIVATE ${CMAKE_CURRENT_BINARY_DIR})
+target_link_libraries(rpc_view PRIVATE brpc-static ${DYNAMIC_LIB})
install(TARGETS rpc_view RUNTIME DESTINATION ${CMAKE_INSTALL_BINDIR})
diff --git a/tools/trackme_server/CMakeLists.txt
b/tools/trackme_server/CMakeLists.txt
index 35d797e9..ca40e419 100644
--- a/tools/trackme_server/CMakeLists.txt
+++ b/tools/trackme_server/CMakeLists.txt
@@ -16,5 +16,5 @@
# under the License.
add_executable(trackme_server trackme_server.cpp)
-target_link_libraries(trackme_server brpc-static ${DYNAMIC_LIB})
+target_link_libraries(trackme_server PRIVATE brpc-static ${DYNAMIC_LIB})
install(TARGETS trackme_server RUNTIME DESTINATION ${CMAKE_INSTALL_BINDIR})
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
