Greetings,
I've created a Cent 6.3 template. Prior to, I have setup the ifcfg-eth0 to look as the following:
DEVICE=eth0
TYPE=Ethernet
_ONBOOT_=yes
NM_CONTROLLED=yes
BOOTPROTO=dhcp
However, on boot the eth0 does not pull dhcp IP's. Along with that manually starting it error states
Device eth0 deos not seem to be present, delaying initialization.
Please advise.
- Maurice
I've created a Cent 6.3 template. Prior to, I have setup the ifcfg-eth0 to look as the following:
DEVICE=eth0
TYPE=Ethernet
_ONBOOT_=yes
NM_CONTROLLED=yes
BOOTPROTO=dhcp
However, on boot the eth0 does not pull dhcp IP's. Along with that manually starting it error states
Device eth0 deos not seem to be present, delaying initialization.
Please advise.
- Maurice