Hi Vihar,

Yes I can.

Looking forward to your reply, thank you.

Cheers.



On Mon, Jul 21, 2014 at 8:13 AM, Vihar <vih1...@gmail.com> wrote:

> Hi,
>
> Yes, if I remove or comment out the first nameserver entry for the VR's
> IP, and only leaving 8.8.8.8 and 8.8.4.4, guest VMs will be running fine
> and will be able to resolve domains properly."
>
> Are you able to ping the first DNS server IP address that you commented
> out?
>
> Regards
> Vihar K
>  On Jul 20, 2014 11:29 PM, "Santhosh Edukulla" <
> santhosh.eduku...@citrix.com>
> wrote:
>
> > Do a traceroute to an external domain say google.com from guest vm, as
> > you mentioned below, both by commenting out vr ip and not, in
> resolv.conf,
> > you may see the difference.
> >
> > "Yes, if I remove or comment out the first nameserver entry for the VR's
> > IP, and only leaving 8.8.8.8 and 8.8.4.4, guest VMs will be running fine
> > and will be able to resolve domains properly."
> >
> >
> > Santhosh
> > ________________________________________
> > From: Indra Pramana [in...@sg.or.id]
> > Sent: Sunday, July 20, 2014 1:48 PM
> > To: us...@cloudstack.apache.org
> > Cc: dev@cloudstack.apache.org
> > Subject: Re: DNS service on VR not responding
> >
> > Hi Santhosh,
> >
> > Good day to you, and thank you for your email.
> >
> > Traceroute packets seems to be dropped, I think it's by default. See
> result
> > below:
> >
> > # traceroute X.X.X.2
> > traceroute to X.X.X.2 (X.X.X.2), 30 hops max, 60 byte packets
> >  1  * * *
> >  2  * * *
> >  3  * * *
> >
> > However, I am able to ping, and there is a response when I tried to
> telnet
> > to port 53.
> >
> > 64 bytes from X.X.X.2: icmp_req=4 ttl=64 time=2.00 ms
> > 64 bytes from X.X.X.2: icmp_req=5 ttl=64 time=0.291 ms
> > 64 bytes from X.X.X.2: icmp_req=6 ttl=64 time=0.384 ms
> > ^C
> > --- X.X.X.2 ping statistics ---
> > 6 packets transmitted, 6 received, 0% packet loss, time 4999ms
> > rtt min/avg/max/mdev = 0.270/0.603/2.006/0.628 ms
> >
> > # telnet X.X.X.2 53
> > Trying X.X.X.2...
> > Connected to X.X.X.2.
> > Escape character is '^]'.
> >
> > netstat -a on the VR shows the service is listening on domain port (53).
> >
> > tcp        0      0 r-2606-VM:domain        *:*
> LISTEN
> >
> > tcp        0      0 X.X.X.2:domain     *:*                     LISTEN
> >
> > udp   156992      0 r-2606-VM:domain        *:*
> >
> > udp   164032      0 X.X.X.2:domain     *:*
> >
> > Can you advise if there's anything else I need to check?
> >
> > Looking forward to your reply, thank you.
> >
> > Cheers.
> >
> >
> >
> >
> > On Mon, Jul 21, 2014 at 1:17 AM, Santhosh Edukulla <
> > santhosh.eduku...@citrix.com> wrote:
> >
> > > Run trace route from guest vms, the result will yield to the point
> where
> > > packet drop is happening, could be a network acl rule issue, but
> tracert
> > > command can lead to some answers.
> > >
> > > List running ports as well on VR, do a telnet to dns port on router
> from
> > > guest vm to verify for its response.
> > >
> > > Santhosh
> > > ________________________________________
> > > From: Indra Pramana [in...@sg.or.id]
> > > Sent: Sunday, July 20, 2014 1:06 PM
> > > To: us...@cloudstack.apache.org
> > > Cc: dev@cloudstack.apache.org
> > > Subject: Re: DNS service on VR not responding
> > >
> > > Hi Rafael,
> > >
> > > Good day to you, and thank you for your reply.
> > >
> > > Can't find anything wrong on dnsmasq.log / daemon.log, just some log
> > > entries related to DHCP, nothing on DNS. I masked the IP addresses
> since
> > > they are public.
> > >
> > > ===
> > > Jul 20 16:21:51 r-2606-VM dnsmasq[3519]: DHCPDISCOVER(eth0) X.X.X.X
> > > 06:62:a8:01:13:37
> > > Jul 20 16:21:51 r-2606-VM dnsmasq[3519]: DHCPOFFER(eth0) X.X.X.X
> > > 06:62:a8:01:13:37
> > > Jul 20 16:21:51 r-2606-VM dnsmasq[3519]: DHCPREQUEST(eth0) X.X.X.X
> > > 06:62:a8:01:13:37
> > > Jul 20 16:21:51 r-2606-VM dnsmasq[3519]: DHCPACK(eth0) X.X.X.X
> > > 06:62:a8:01:13:37 yyyyyy
> > > Jul 20 16:23:53 r-2606-VM dnsmasq[3519]: DHCPINFORM(eth0) X.X.X.X
> > > 06:43:4a:01:12:65
> > > Jul 20 16:23:53 r-2606-VM dnsmasq[3519]: DHCPACK(eth0) X.X.X.X
> > > 06:43:4a:01:12:65 zzzzzz
> > > ===
> > >
> > > Yes, the guest VMs are having difficulties resolving domains into IP
> > > addresses because of the problem on the VR's DNS server.
> > >
> > > $ host www.google.com X.X.X.X (where X.X.X.X is the IP address of the
> > VR)
> > > ;; connection timed out; no servers could be reached
> > >
> > > However, from within the VR, I am able to resolve domains just fine.
> > >
> > > Any advise where can I start troubleshooting this?
> > >
> > > Looking forward to your reply, thank you.
> > >
> > > Cheers.
> > >
> > >
> > >
> > > On Sun, Jul 20, 2014 at 11:26 PM, Rafael Weingartner <
> > > rafaelweingart...@gmail.com> wrote:
> > >
> > > > Have you taken a look at dnsmasq.log in the VR ?
> > > > What do you mean with not responding? The addresses are not being
> > > resolved
> > > > to ip addresses?
> > > >
> > > >
> > > > On Sun, Jul 20, 2014 at 11:53 AM, Indra Pramana <in...@sg.or.id>
> > wrote:
> > > >
> > > > > Dear all,
> > > > >
> > > > > All our guest VMs are having our virtual router (VR)'s IP address
> on
> > > > > /etc/resolv.conf. In the past two weeks, I just realised that the
> DNS
> > > > > service on the VR is not working, and doesn't respond to DNS
> queries
> > > from
> > > > > the DNS clients on the guest VM.
> > > > >
> > > > > I have tried to stop and start back the VR, but the problem
> persists.
> > > > >
> > > > > DHCP services seems to be running fine, only DNS services are not
> > > > working.
> > > > > From what I understand, both services are provided by dnsmasq,
> > correct?
> > > > >
> > > > > Any advice on how can I resolve the problem?
> > > > >
> > > > > Looking forward to your reply, thank you.
> > > > >
> > > > > Cheers.
> > > > >
> > > >
> > > >
> > > >
> > > > --
> > > > Rafael Weingärtner
> > > >
> > >
>

Reply via email to