Github user remibergsma commented on the pull request:

    https://github.com/apache/cloudstack/pull/1356#issuecomment-173863164
  
    LGTM based on these tests:
    
    ```
    nosetests --with-marvin --marvin-config=${marvinCfg} -s -a 
tags=advanced,required_hardware=true \
    component/test_vpc_redundant.py \
    component/test_routers_iptables_default_policy.py \
    component/test_routers_network_ops.py \
    component/test_vpc_router_nics.py \
    smoke/test_loadbalance.py \
    smoke/test_internal_lb.py \
    smoke/test_ssvm.py \
    smoke/test_network.py
    
    ```
    Result:
    
    ```
    Check the password file in the Router VM ... === TestName: 
test_isolate_network_password_server | Status : SUCCESS ===
    ok
    Create a redundant VPC with two networks with two VMs in each network ... 
=== TestName: test_01_create_redundant_VPC_2tiers_4VMs_4IPs_4PF_ACL | Status : 
SUCCESS ===
    ok
    Create a redundant VPC with two networks with two VMs in each network and 
check default routes ... === TestName: test_02_redundant_VPC_default_routes | 
Status : SUCCESS ===
    ok
    Create a redundant VPC with two networks with two VMs in each network ... 
=== TestName: 
test_03_create_redundant_VPC_1tier_2VMs_2IPs_2PF_ACL_reboot_routers | Status : 
SUCCESS ===
    ok
    Create a redundant VPC with 1 Tier, 1 VM, 1 ACL, 1 PF and test Network GC 
Nics ... === TestName: test_04_rvpc_network_garbage_collector_nics | Status : 
SUCCESS ===
    ok
    Create a redundant VPC with 1 Tier, 1 VM, 1 ACL, 1 PF and test Network GC 
Nics ... === TestName: test_05_rvpc_multi_tiers | Status : SUCCESS ===
    ok
    Test iptables default INPUT/FORWARD policy on RouterVM ... === TestName: 
test_02_routervm_iptables_policies | Status : SUCCESS ===
    ok
    Test iptables default INPUT/FORWARD policies on VPC router ... === 
TestName: test_01_single_VPC_iptables_policies | Status : SUCCESS ===
    ok
    Test redundant router internals ... === TestName: 
test_01_isolate_network_FW_PF_default_routes_egress_true | Status : SUCCESS ===
    ok
    Test redundant router internals ... === TestName: 
test_02_isolate_network_FW_PF_default_routes_egress_false | Status : SUCCESS ===
    ok
    Test redundant router internals ... === TestName: 
test_01_RVR_Network_FW_PF_SSH_default_routes_egress_true | Status : SUCCESS ===
    ok
    Test redundant router internals ... === TestName: 
test_02_RVR_Network_FW_PF_SSH_default_routes_egress_false | Status : SUCCESS ===
    ok
    Test redundant router internals ... === TestName: 
test_03_RVR_Network_check_router_state | Status : SUCCESS ===
    ok
    Create a VPC with two networks with one VM in each network and test nics 
after destroy ... === TestName: test_01_VPC_nics_after_destroy | Status : 
SUCCESS ===
    ok
    Create a VPC with two networks with one VM in each network and test default 
routes ... === TestName: test_02_VPC_default_routes | Status : SUCCESS ===
    ok
    Check that the /etc/dhcphosts.txt doesn't contain duplicate IPs ... === 
TestName: test_router_dhcphosts | Status : SUCCESS ===
    ok
    Test to create Load balancing rule with source NAT ... === TestName: 
test_01_create_lb_rule_src_nat | Status : SUCCESS ===
    ok
    Test to create Load balancing rule with non source NAT ... === TestName: 
test_02_create_lb_rule_non_nat | Status : SUCCESS ===
    ok
    Test for assign & removing load balancing rule ... === TestName: 
test_assign_and_removal_lb | Status : SUCCESS ===
    ok
    Test create, assign, remove of an Internal LB with roundrobin http traffic 
to 3 vm's in a Single VPC ... === TestName: 
test_01_internallb_roundrobin_1VPC_3VM_HTTP_port80 | Status : SUCCESS ===
    ok
    Test create, assign, remove of an Internal LB with roundrobin http traffic 
to 3 vm's in a Redundant VPC ... === TestName: 
test_02_internallb_roundrobin_1RVPC_3VM_HTTP_port80 | Status : SUCCESS ===
    ok
    Test to verify access to loadbalancer haproxy admin stats page ... === 
TestName: test_03_vpc_internallb_haproxy_stats_on_all_interfaces | Status : 
SUCCESS ===
    ok
    Test to verify access to loadbalancer haproxy admin stats page ... === 
TestName: test_04_rvpc_internallb_haproxy_stats_on_all_interfaces | Status : 
SUCCESS ===
    ok
    Test SSVM Internals ... === TestName: test_03_ssvm_internals | Status : 
SUCCESS ===
    ok
    Test CPVM Internals ... === TestName: test_04_cpvm_internals | Status : 
SUCCESS ===
    ok
    Test stop SSVM ... === TestName: test_05_stop_ssvm | Status : SUCCESS ===
    ok
    Test stop CPVM ... === TestName: test_06_stop_cpvm | Status : SUCCESS ===
    ok
    Test reboot SSVM ... === TestName: test_07_reboot_ssvm | Status : SUCCESS 
===
    ok
    Test reboot CPVM ... === TestName: test_08_reboot_cpvm | Status : SUCCESS 
===
    ok
    Test destroy SSVM ... === TestName: test_09_destroy_ssvm | Status : SUCCESS 
===
    ok
    Test destroy CPVM ... === TestName: test_10_destroy_cpvm | Status : SUCCESS 
===
    ok
    test_01_vpc_privategw_acl 
(integration.smoke.test_privategw_acl.TestPrivateGwACL) ... === TestName: 
test_01_vpc_privategw_acl | Status : SUCCESS ===
    ok
    test_02_vpc_privategw_static_routes 
(integration.smoke.test_privategw_acl.TestPrivateGwACL) ... === TestName: 
test_02_vpc_privategw_static_routes | Status : SUCCESS ===
    ok
    test_03_vpc_privategw_restart_vpc_cleanup 
(integration.smoke.test_privategw_acl.TestPrivateGwACL) ... === TestName: 
test_03_vpc_privategw_restart_vpc_cleanup | Status : SUCCESS ===
    ok
    test_04_rvpc_privategw_static_routes 
(integration.smoke.test_privategw_acl.TestPrivateGwACL) ... === TestName: 
test_04_rvpc_privategw_static_routes | Status : SUCCESS ===
    ok
    Test for port forwarding on source NAT ... === TestName: 
test_01_port_fwd_on_src_nat | Status : SUCCESS ===
    ok
    Test for port forwarding on non source NAT ... === TestName: 
test_02_port_fwd_on_non_src_nat | Status : SUCCESS ===
    ok
    Test for reboot router ... === TestName: test_reboot_router | Status : 
SUCCESS ===
    ok
    Test for Router rules for network rules on acquired public IP ... === 
TestName: test_network_rules_acquired_public_ip_1_static_nat_rule | Status : 
SUCCESS ===
    ok
    Test for Router rules for network rules on acquired public IP ... === 
TestName: test_network_rules_acquired_public_ip_2_nat_rule | Status : SUCCESS 
===
    ok
    Test for Router rules for network rules on acquired public IP ... === 
TestName: test_network_rules_acquired_public_ip_3_Load_Balancer_Rule | Status : 
SUCCESS ===
    ok
    
    ----------------------------------------------------------------------
    Ran 41 tests in 22405.035s
    
    OK
    ```
    
    
    And:
    
    ```
    nosetests --with-marvin --marvin-config=${marvinCfg} -s -a 
tags=advanced,required_hardware=false \
    smoke/test_routers.py \
    smoke/test_network_acl.py \
    smoke/test_privategw_acl.py \
    smoke/test_reset_vm_on_reboot.py \
    smoke/test_vm_life_cycle.py \
    smoke/test_vpc_vpn.py \
    smoke/test_service_offerings.py \
    component/test_vpc_offerings.py \
    component/test_vpc_routers.py
    ```
    
    Result:
    
    ```
    Test router internal advanced zone ... === TestName: 
test_02_router_internal_adv | Status : SUCCESS ===
    ok
    Test restart network ... === TestName: test_03_restart_network_cleanup | 
Status : SUCCESS ===
    ok
    Test router basic setup ... === TestName: test_05_router_basic | Status : 
SUCCESS ===
    ok
    Test router advanced setup ... === TestName: test_06_router_advanced | 
Status : SUCCESS ===
    ok
    Test stop router ... === TestName: test_07_stop_router | Status : SUCCESS 
===
    ok
    Test start router ... === TestName: test_08_start_router | Status : SUCCESS 
===
    ok
    Test reboot router ... === TestName: test_09_reboot_router | Status : 
SUCCESS ===
    ok
    Test reset virtual machine on reboot ... === TestName: 
test_01_reset_vm_on_reboot | Status : SUCCESS ===
    ok
    Test advanced zone virtual router ... === TestName: 
test_advZoneVirtualRouter | Status : SUCCESS ===
    ok
    Test Deploy Virtual Machine ... === TestName: test_deploy_vm | Status : 
SUCCESS ===
    ok
    Test Multiple Deploy Virtual Machine ... === TestName: 
test_deploy_vm_multiple | Status : SUCCESS ===
    ok
    Test Stop Virtual Machine ... === TestName: test_01_stop_vm | Status : 
SUCCESS ===
    ok
    Test Start Virtual Machine ... === TestName: test_02_start_vm | Status : 
SUCCESS ===
    ok
    Test Reboot Virtual Machine ... === TestName: test_03_reboot_vm | Status : 
SUCCESS ===
    ok
    Test destroy Virtual Machine ... === TestName: test_06_destroy_vm | Status 
: SUCCESS ===
    ok
    Test recover Virtual Machine ... === TestName: test_07_restore_vm | Status 
: SUCCESS ===
    ok
    Test migrate VM ... === TestName: test_08_migrate_vm | Status : SUCCESS ===
    ok
    Test destroy(expunge) Virtual Machine ... === TestName: test_09_expunge_vm 
| Status : SUCCESS ===
    ok
    Test to create service offering ... === TestName: 
test_01_create_service_offering | Status : SUCCESS ===
    ok
    Test to update existing service offering ... === TestName: 
test_02_edit_service_offering | Status : SUCCESS ===
    ok
    Test to delete service offering ... === TestName: 
test_03_delete_service_offering | Status : SUCCESS ===
    ok
    Test for delete account ... === TestName: test_delete_account | Status : 
SUCCESS ===
    ok
    Test for Associate/Disassociate public IP address for admin account ... === 
TestName: test_public_ip_admin_account | Status : SUCCESS ===
    ok
    Test for Associate/Disassociate public IP address for user account ... === 
TestName: test_public_ip_user_account | Status : SUCCESS ===
    ok
    Test for release public IP address ... === TestName: test_releaseIP | 
Status : SUCCESS ===
    ok
    Test create VPC offering ... === TestName: test_01_create_vpc_offering | 
Status : SUCCESS ===
    ok
    Test VPC offering without load balancing service ... === TestName: 
test_03_vpc_off_without_lb | Status : SUCCESS ===
    ok
    Test VPC offering without static NAT service ... === TestName: 
test_04_vpc_off_without_static_nat | Status : SUCCESS ===
    ok
    Test VPC offering without port forwarding service ... === TestName: 
test_05_vpc_off_without_pf | Status : SUCCESS ===
    ok
    Test VPC offering with invalid services ... === TestName: 
test_06_vpc_off_invalid_services | Status : SUCCESS ===
    ok
    Test update VPC offering ... === TestName: test_07_update_vpc_off | Status 
: SUCCESS ===
    ok
    Test list VPC offering ... === TestName: test_08_list_vpc_off | Status : 
SUCCESS ===
    ok
    test_09_create_redundant_vpc_offering 
(integration.component.test_vpc_offerings.TestVPCOffering) ... === TestName: 
test_09_create_redundant_vpc_offering | Status : SUCCESS ===
    ok
    Test start/stop of router after addition of one guest network ... === 
TestName: test_01_start_stop_router_after_addition_of_one_guest_network | 
Status : SUCCESS ===
    ok
    Test reboot of router after addition of one guest network ... === TestName: 
test_02_reboot_router_after_addition_of_one_guest_network | Status : SUCCESS ===
    ok
    Test to change service offering of router after addition of one guest 
network ... === TestName: 
test_04_chg_srv_off_router_after_addition_of_one_guest_network | Status : 
SUCCESS ===
    ok
    Test destroy of router after addition of one guest network ... === 
TestName: test_05_destroy_router_after_addition_of_one_guest_network | Status : 
SUCCESS ===
    ok
    Test to stop and start router after creation of VPC ... === TestName: 
test_01_stop_start_router_after_creating_vpc | Status : SUCCESS ===
    ok
    Test to reboot the router after creating a VPC ... === TestName: 
test_02_reboot_router_after_creating_vpc | Status : SUCCESS ===
    ok
    Tests to change service offering of the Router after ... === TestName: 
test_04_change_service_offerring_vpc | Status : SUCCESS ===
    ok
    Test to destroy the router after creating a VPC ... === TestName: 
test_05_destroy_router_after_creating_vpc | Status : SUCCESS ===
    ok
    
    ----------------------------------------------------------------------
    Ran 41 tests in 7422.073s
    
    OK
    ```



---
If your project is set up for it, you can reply to this email and have your
reply appear on GitHub as well. If your project does not have this feature
enabled and wishes so, or if the feature is enabled but not working, please
contact infrastructure at infrastruct...@apache.org or file a JIRA ticket
with INFRA.
---

Reply via email to