Not sure, KVM works on arbitrary iSCSI target except the Solidfire. вс, 3 мар. 2019 г. в 14:10, Jean-Francois Nadeau <the.jfnad...@gmail.com>:
> Hi Ivan, > > SS is still on NFS in this case. It's the primary storage in trying to > move on iscsi managed storage so just like Solidfire/Ceph on primary. > > While NFS is used on both SS and primary, I understand the SSVM just > mounts both shares and copies templates when needed. > > But if you have a qcow2 template on SS, and primary on managed storage, I > presume the SSVM copies the qcow2 into the just dynamically created iscsi > volume in a raw way.... but I don't know that is what Im trying to connect > the dots :) > > > On Sun, Mar 3, 2019 at 2:02 PM Ivan Kudryavtsev <kudryavtsev...@bw-sw.com> > wrote: > > > Jean-Francois, > > NFS primary, NFS secondary worked always like a charm. It's the most used > > way for CloudStack, I suppose. It works great for my 4.11.2, worked great > > for 4.11.1 and even for full-trash 4.10 release. > > > > I have never tried SS on iSCSI and suppose it's a wrong way to go except > > the way you use Solidfire. For KVM you must use NFS, S3 or Swift. > > > > > > вс, 3 мар. 2019 г. в 13:50, Jean-Francois Nadeau <the.jfnad...@gmail.com > >: > > > > > Hi all, > > > > > > Im kicking the tires with managed storage with under 4.11.2 with KVM > and > > > Datera as primary storage. > > > > > > My first attempt at creating a VM from a template stored on NFS > secondary > > > failed silently. Looking at the SSVM cloud logs I saw no exception. > The > > VM > > > root disks gets properly created on the backend and attached on the KVM > > > host but the block device is blank. Somehow the template did not get > > > copied over. > > > > > > Starting troubleshooting from this point... I realize I don't > understand > > > how this work vs what Im used to with NFS as both primary and secondary > > > storage. > > > > > > I presume the SSVM has to copy the qcow2 template from the NFS > secondary > > to > > > the primary storage but this one is iscsi now... and I did not setup > > > initiator access to the SSVM or found instructions I need to do that. > > > > > > Can someone fill the blank on to how this work ? > > > > > > thanks all, > > > > > > Jean-Francois > > > > > > > > > -- > > With best regards, Ivan Kudryavtsev > > Bitworks LLC > > Cell RU: +7-923-414-1515 > > Cell USA: +1-201-257-1512 > > WWW: http://bitworks.software/ <http://bw-sw.com/> > > > -- With best regards, Ivan Kudryavtsev Bitworks LLC Cell RU: +7-923-414-1515 Cell USA: +1-201-257-1512 WWW: http://bitworks.software/ <http://bw-sw.com/>