Hello Timothy - I have posted the screenshots here:
https://drive.google.com/file/d/0B4sR85qs377yTThzWHM4YXlxOFE/view?usp=sharing Kindly advise as soon as possible. Many thanks, Sekhar H. -----Original Message----- From: Miller, Timothy [mailto:[email protected]] Sent: Tuesday, August 04, 2015 4:14 PM To: [email protected] Subject: RE: cTAKES GUI for I2B2 Can you post the screenshot somewhere it might be linked to? I don't know if we can post image attachments to the dev list. Thanks Tim ________________________________ From: Hari, Sekhar [[email protected]] Sent: Monday, August 03, 2015 10:35 PM To: [email protected]; [email protected]; [email protected] Subject: RE: cTAKES GUI for I2B2 Hello there - Please, can somebody advise me on my question below? Thanks, Sekhar H. ________________________________ From: Hari, Sekhar Sent: 31 July 2015 15:02 To: [email protected] Subject: cTAKES GUI for I2B2 Hello Pei - Can you please assist me. I am doing a few experiments using I2B2. There is a requirement for me to use cTAKES for reading clinical notes and to extract the key terminologies from the notes so it can be inserted into I2B2. I found cTAKES GUI for I2B2 and installed it. While trying to read a sample clinical note, though seemingly the pipelines run, I don't see any useful output in the "Results" section of the GUI. I have included a screenshot below. The "Results" page says language: "x-unspecified". Not sure what is going wrong. Am I doing anything wrong or missing any configurations? Also, I have included the NLP processors that am using to do this read and extract. You can see this screenshot at the bottom of this email. Hope you can help. Many thanks, Sekhar H.
