Have you tried calling "rte_eal_init()" closer to the beginning of the program in your secondary process (i.e. the first thing in main())?
The same mmap address is required. The reason is simple, if process A thinks the virtual address of an mbuf is 123, and process B thinks the virtual address of the same mbuf is 456, either process may segmentation fault, accessing mbuf memory that is not actually mapped into the processes address space. Jeff -----Original Message----- From: dev [mailto:dev-boun...@dpdk.org] On Behalf Of Etai Lev Ran Sent: Tuesday, April 08, 2014 8:13 AM To: dev at dpdk.org Subject: [dpdk-dev] Using DPDK in a multiprocess environment Hi, I'd like to split DPDK application functionality into a setup (primary) process and business logic (secondary) processes. The secondary processes access the hardware queues directly (exclusive queue per process) and not through software rings. I'm running into an initialization problem: - The primary starts and sets up memory and ports and then goes to sleep waiting for termination signal - Secondary processes fail when probing the PCI bus for devices (required, otherwise I get 0 ports visible in the secondary) The error is directly related to the secondary failing to get the *same* virtual address for mmap'ing the UIO device fd's. The reason is that the secondary processes has considerably more shared objects loaded and some of these are loaded and mapped into addresses which the primary used to map UIO fd's. The pci_map_resource() (linuxapp/eal_pci.c) code explicitly requires that the secondary processes get the same mmap'ed address as given to the primary. 1) Is this behavior (same mmap address) required? 2) If so, is there a workaround to cause PCI areas of UIO devices to be mapped to the same location in arbitrary processes? The samples work just fine since all primary and secondary processes have similar set and load order for .so's Using v1.6 on Ubuntu 12.04 64b, ixgbe devices, 1GB hugepages, ASLR disabled. Thanks, Etai