[dpdk-dev] [PATCH] pmd: Fixed compilation error due to old RTE_DRV_LOG when bypass=y

[Pablo de Lara]

RTE_DRV_LOG macro has changed, so now it requires at least 2 arguments,
which have been added in ixgbe_bypass, specifying log type, to fix compilation 
error

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch at intel.com>
---
 lib/librte_pmd_ixgbe/ixgbe_82599_bypass.c |   10 +++++-----
 lib/librte_pmd_ixgbe/ixgbe_bypass.c       |    2 +-
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/lib/librte_pmd_ixgbe/ixgbe_82599_bypass.c 
b/lib/librte_pmd_ixgbe/ixgbe_82599_bypass.c
index 2623419..12cc01d 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_82599_bypass.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_82599_bypass.c
@@ -63,7 +63,7 @@ ixgbe_set_fiber_fixed_speed(struct ixgbe_hw *hw, 
ixgbe_link_speed speed)
                rs = IXGBE_SFF_SOFT_RS_SELECT_1G;
                break;
        default:
-               PMD_DRV_LOG("Invalid fixed module speed");
+               PMD_DRV_LOG(ERR, "Invalid fixed module speed");
                return;
        }

@@ -72,7 +72,7 @@ ixgbe_set_fiber_fixed_speed(struct ixgbe_hw *hw, 
ixgbe_link_speed speed)
                                           IXGBE_I2C_EEPROM_DEV_ADDR2,
                                           &eeprom_data);
        if (status) {
-               PMD_DRV_LOG("Failed to read Rx Rate Select RS0");
+               PMD_DRV_LOG(ERR, "Failed to read Rx Rate Select RS0");
                goto out;
        }

@@ -82,7 +82,7 @@ ixgbe_set_fiber_fixed_speed(struct ixgbe_hw *hw, 
ixgbe_link_speed speed)
                                            IXGBE_I2C_EEPROM_DEV_ADDR2,
                                            eeprom_data);
        if (status) {
-               PMD_DRV_LOG("Failed to write Rx Rate Select RS0");
+               PMD_DRV_LOG(ERR, "Failed to write Rx Rate Select RS0");
                goto out;
        }

@@ -91,7 +91,7 @@ ixgbe_set_fiber_fixed_speed(struct ixgbe_hw *hw, 
ixgbe_link_speed speed)
                                           IXGBE_I2C_EEPROM_DEV_ADDR2,
                                           &eeprom_data);
        if (status) {
-               PMD_DRV_LOG("Failed to read Rx Rate Select RS1");
+               PMD_DRV_LOG(ERR, "Failed to read Rx Rate Select RS1");
                goto out;
        }

@@ -101,7 +101,7 @@ ixgbe_set_fiber_fixed_speed(struct ixgbe_hw *hw, 
ixgbe_link_speed speed)
                                            IXGBE_I2C_EEPROM_DEV_ADDR2,
                                            eeprom_data);
        if (status) {
-               PMD_DRV_LOG("Failed to write Rx Rate Select RS1");
+               PMD_DRV_LOG(ERR, "Failed to write Rx Rate Select RS1");
                goto out;
        }
 out:
diff --git a/lib/librte_pmd_ixgbe/ixgbe_bypass.c 
b/lib/librte_pmd_ixgbe/ixgbe_bypass.c
index 1a980b8..15203a4 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_bypass.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_bypass.c
@@ -114,7 +114,7 @@ ixgbe_bypass_init(struct rte_eth_dev *dev)
        /* Only allow BYPASS ops on the first port */
        if (hw->device_id != IXGBE_DEV_ID_82599_BYPASS ||
                        hw->bus.func != 0) {
-               PMD_DRV_LOG("bypass function is not supported on that device");
+               PMD_DRV_LOG(ERR, "bypass function is not supported on that 
device");
                return;
        }

-- 
1.7.4.1