Mellanox drivers remains un-compiled by default due to third party
libraries dependencies. They can be enabled through:
- enable_driver_mlx{4,5}=true or
- enable_driver_mlx{4,5}_glue=true
depending on the needs.
To avoid modifying the whole sources and keep the compatibility with
current build systems (e.g. make), the mlx{4,5}_autoconf.h is still
generated by invoking DPDK scripts though meson's run_command() instead
of using has_types, has_members, ... commands.
Meson will try to find the required external libraries. When they are
not installed system wide, they can be provided though CFLAGS, LDFLAGS
and LD_LIBRARY_PATH environment variables, example (considering
RDMA-Core is installed in /tmp/rdma-core):
# CLFAGS=-I/tmp/rdma-core/build/include \
LDFLAGS=-L/tmp/rdma-core/build/lib \
LD_LIBRARY_PATH=/tmp/rdma-core/build/lib \
meson -Denable_driver_mlx4=true output
# CLFAGS=-I/tmp/rdma-core/build/include \
LDFLAGS=-L/tmp/rdma-core/build/lib \
LD_LIBRARY_PATH=/tmp/rdma-core/build/lib \
ninja -C output install
Signed-off-by: Nelio Laranjeiro <nelio.laranje...@6wind.com>
---
Changes in v2:
- dropped patch https://patches.dpdk.org/patch/43897/
- remove extra_{cflags,ldflags} as already honored by meson through
environment variables.
---
drivers/net/meson.build | 2 +
drivers/net/mlx4/meson.build | 94 ++++++
drivers/net/mlx5/meson.build | 545 +++++++++++++++++++++++++++++++++++
meson_options.txt | 8 +
4 files changed, 649 insertions(+)
create mode 100644 drivers/net/mlx4/meson.build
create mode 100644 drivers/net/mlx5/meson.build
diff --git a/drivers/net/meson.build b/drivers/net/meson.build
index 9c28ed4da..c7a2d0e7d 100644
--- a/drivers/net/meson.build
+++ b/drivers/net/meson.build
@@ -18,6 +18,8 @@ drivers = ['af_packet',
'ixgbe',
'kni',
'liquidio',
+ 'mlx4',
+ 'mlx5',
'mvpp2',
'netvsc',
'nfp',
diff --git a/drivers/net/mlx4/meson.build b/drivers/net/mlx4/meson.build
new file mode 100644
index 000000000..debaca5b6
--- /dev/null
+++ b/drivers/net/mlx4/meson.build
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright 2018 6WIND S.A.
+# Copyright 2018 Mellanox Technologies, Ltd
+
+# As there is no more configuration file to activate/configure the PMD it will
+# use some variables here to configure it.
+pmd_dlopen = get_option('enable_driver_mlx4_glue')
+build = get_option('enable_driver_mlx4') or pmd_dlopen
+# dpdk_conf.set('RTE_LIBRTE_MLX4_DEBUG', 1)
+# Glue configuratin
+LIB_GLUE_BASE = 'librte_pmd_mlx4_glue.so'
+LIB_GLUE_VERSION = '18.02.0'
+LIB_GLUE = LIB_GLUE_BASE + '.' + LIB_GLUE_VERSION
+if pmd_dlopen
+ dpdk_conf.set('RTE_LIBRTE_MLX4_DLOPEN_DEPS', 1)
+ cflags += [
+ '-DMLX4_GLUE="@0@"'.format(LIB_GLUE),
+ '-DMLX4_GLUE_VERSION="@0@"'.format(LIB_GLUE_VERSION),
+ '-ldl',
+ ]
+endif
+# Compile PMD
+if build
+ allow_experimental_apis = true
+ ext_deps += [
+ cc.find_library('mnl'),
+ cc.find_library('mlx4'),
+ cc.find_library('ibverbs'),
+ ]
+ sources = files(
+ 'mlx4.c',
+ 'mlx4_ethdev.c',
+ 'mlx4_flow.c',
+ 'mlx4_intr.c',
+ 'mlx4_mr.c',
+ 'mlx4_rxq.c',
+ 'mlx4_rxtx.c',
+ 'mlx4_txq.c',
+ 'mlx4_utils.c',
+ )
+ if not pmd_dlopen
+ sources += files('mlx4_glue.c')
+ endif
+ cflags += [
+ '-O3',
+ '-Wall',
+ '-Wextra',
+ '-g',
+ '-std=c11',
+ '-I.',
+ '-D_BSD_SOURCE',
+ '-D_DEFAULT_SOURCE',
+ '-D_XOPEN_SOURCE=600',
+ '-Wno-strict-prototypes',
+ ]
+ if dpdk_conf.has('RTE_LIBRTE_MLX4_DEBUG')
+ cflags += [ '-pedantic', '-UNDEBUG', '-DPEDANTIC' ]
+ else
+ cflags += [ '-DNDEBUG', '-UPEDANTIC' ]
+ endif
+ # To maintain the compatibility with the make build system
+ # mlx4_autoconf.h file is still generated.
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx4_autoconf.h',
+ 'HAVE_IBV_MLX4_WQE_LSO_SEG',
+ 'infiniband/mlx4dv.h',
+ 'type', 'struct mlx4_wqe_lso_seg')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+endif
+# Build Glue Library
+if pmd_dlopen
+ dlopen_name = 'mlx4_glue'
+ dlopen_lib_name = driver_name_fmt.format(dlopen_name)
+ dlopen_so_version = LIB_GLUE_VERSION
+ dlopen_sources = files('mlx4_glue.c')
+ dlopen_install_dir = [ eal_pmd_path + '-glue' ]
+ shared_lib = shared_library(
+ dlopen_lib_name,
+ dlopen_sources,
+ include_directories: global_inc,
+ c_args: cflags,
+ link_args: [
+ '-Wl,-export-dynamic',
+ '-Wl,-h,@0@'.format(LIB_GLUE),
+ '-lmlx4',
+ '-libverbs',
+ ],
+ soversion: dlopen_so_version,
+ install: true,
+ install_dir: dlopen_install_dir,
+ )
+endif
diff --git a/drivers/net/mlx5/meson.build b/drivers/net/mlx5/meson.build
new file mode 100644
index 000000000..b918ca437
--- /dev/null
+++ b/drivers/net/mlx5/meson.build
@@ -0,0 +1,545 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright 2018 6WIND S.A.
+# Copyright 2018 Mellanox Technologies, Ltd
+
+# As there is no more configuration file to activate/configure the PMD it will
+# use some variables here to configure it.
+pmd_dlopen = get_option('enable_driver_mlx5_glue')
+build = get_option('enable_driver_mlx5') or pmd_dlopen
+# dpdk_conf.set('RTE_LIBRTE_MLX5_DEBUG', 1)
+# Glue configuratin
+LIB_GLUE_BASE = 'librte_pmd_mlx5_glue.so'
+LIB_GLUE_VERSION = '18.05.0'
+LIB_GLUE = LIB_GLUE_BASE + '.' + LIB_GLUE_VERSION
+if pmd_dlopen
+ dpdk_conf.set('RTE_LIBRTE_MLX5_DLOPEN_DEPS', 1)
+ cflags += [
+ '-DMLX5_GLUE="@0@"'.format(LIB_GLUE),
+ '-DMLX5_GLUE_VERSION="@0@"'.format(LIB_GLUE_VERSION),
+ '-ldl',
+ ]
+endif
+# Compile PMD
+if build
+ allow_experimental_apis = true
+ ext_deps += [
+ cc.find_library('mnl'),
+ cc.find_library('mlx5'),
+ cc.find_library('ibverbs'),
+ ]
+ sources = files(
+ 'mlx5.c',
+ 'mlx5_ethdev.c',
+ 'mlx5_flow.c',
+ 'mlx5_mac.c',
+ 'mlx5_mr.c',
+ 'mlx5_nl.c',
+ 'mlx5_nl_flow.c',
+ 'mlx5_rss.c',
+ 'mlx5_rxmode.c',
+ 'mlx5_rxq.c',
+ 'mlx5_rxtx.c',
+ 'mlx5_socket.c',
+ 'mlx5_stats.c',
+ 'mlx5_trigger.c',
+ 'mlx5_txq.c',
+ 'mlx5_vlan.c',
+ )
+ if dpdk_conf.has('RTE_ARCH_X86_64') or dpdk_conf.has('RTE_ARCH_ARM64')
+ sources += files('mlx5_rxtx_vec.c')
+ endif
+ if not pmd_dlopen
+ sources += files('mlx5_glue.c')
+ endif
+ cflags += [
+ '-O3',
+ '-Wall',
+ '-Wextra',
+ '-g',
+ '-std=c11',
+ '-I.',
+ '-D_BSD_SOURCE',
+ '-D_DEFAULT_SOURCE',
+ '-D_XOPEN_SOURCE=600',
+ '-Wno-strict-prototypes',
+ ]
+ if dpdk_conf.has('RTE_LIBRTE_MLX5_DEBUG')
+ cflags += [ '-pedantic', '-UNDEBUG', '-DPEDANTIC' ]
+ else
+ cflags += [ '-DNDEBUG', '-UPEDANTIC' ]
+ endif
+ # To maintain the compatibility with the make build system
+ # mlx5_autoconf.h file is still generated.
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_IBV_DEVICE_STRIDING_RQ_SUPPORT',
+ 'infiniband/mlx5dv.h',
+ 'enum', 'MLX5DV_CQE_RES_FORMAT_CSUM_STRIDX')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_IBV_DEVICE_TUNNEL_SUPPORT',
+ 'infiniband/mlx5dv.h',
+ 'enum', 'MLX5DV_CONTEXT_MASK_TUNNEL_OFFLOADS')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_IBV_DEVICE_MPLS_SUPPORT',
+ 'infiniband/verbs.h',
+ 'enum', 'IBV_FLOW_SPEC_MPLS')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_IBV_WQ_FLAG_RX_END_PADDING',
+ 'infiniband/verbs.h',
+ 'enum', 'IBV_WQ_FLAG_RX_END_PADDING')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_IBV_MLX5_MOD_SWP',
+ 'infiniband/mlx5dv.h',
+ 'type', 'struct mlx5dv_sw_parsing_caps')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_IBV_MLX5_MOD_MPW',
+ 'infiniband/mlx5dv.h',
+ 'enum', 'MLX5DV_CONTEXT_FLAGS_MPW_ALLOWED')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_IBV_MLX5_MOD_CQE_128B_COMP',
+ 'infiniband/mlx5dv.h',
+ 'enum', 'MLX5DV_CONTEXT_FLAGS_CQE_128B_COMP')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_ETHTOOL_LINK_MODE_25G',
+ '/usr/include/linux/ethtool.h',
+ 'enum', 'ETHTOOL_LINK_MODE_25000baseCR_Full_BIT')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_ETHTOOL_LINK_MODE_50G',
+ '/usr/include/linux/ethtool.h',
+ 'enum', 'ETHTOOL_LINK_MODE_50000baseCR2_Full_BIT')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_ETHTOOL_LINK_MODE_100G',
+ '/usr/include/linux/ethtool.h',
+ 'enum', 'ETHTOOL_LINK_MODE_100000baseKR4_Full_BIT')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_IBV_DEVICE_COUNTERS_SET_SUPPORT',
+ 'infiniband/verbs.h',
+ 'type', 'struct ibv_counter_set_init_attr')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_RDMA_NL_NLDEV',
+ 'rdma/rdma_netlink.h',
+ 'enum', 'RDMA_NL_NLDEV')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_RDMA_NLDEV_CMD_GET',
+ 'rdma/rdma_netlink.h',
+ 'enum', 'RDMA_NLDEV_CMD_GET')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_RDMA_NLDEV_CMD_PORT_GET',
+ 'rdma/rdma_netlink.h',
+ 'enum', 'RDMA_NLDEV_CMD_PORT_GET')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_RDMA_NLDEV_ATTR_DEV_INDEX',
+ 'rdma/rdma_netlink.h',
+ 'enum', 'RDMA_NLDEV_ATTR_DEV_INDEX')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_RDMA_NLDEV_ATTR_DEV_NAME',
+ 'rdma/rdma_netlink.h',
+ 'enum', 'RDMA_NLDEV_ATTR_DEV_NAME')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_RDMA_NLDEV_ATTR_PORT_INDEX',
+ 'rdma/rdma_netlink.h',
+ 'enum', 'RDMA_NLDEV_ATTR_PORT_INDEX')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_RDMA_NLDEV_ATTR_NDEV_INDEX',
+ 'rdma/rdma_netlink.h',
+ 'enum', 'RDMA_NLDEV_ATTR_NDEV_INDEX')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_IFLA_PHYS_SWITCH_ID',
+ 'linux/if_link.h',
+ 'enum', 'IFLA_PHYS_SWITCH_ID')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_IFLA_PHYS_PORT_NAME',
+ 'linux/if_link.h',
+ 'enum', 'IFLA_PHYS_PORT_NAME')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_TCA_FLOWER_ACT',
+ 'linux/pkt_cls.h',
+ 'enum', 'TCA_FLOWER_ACT')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_TCA_FLOWER_FLAGS',
+ 'linux/pkt_cls.h',
+ 'enum', 'TCA_FLOWER_FLAGS')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_TCA_FLOWER_KEY_ETH_TYPE',
+ 'linux/pkt_cls.h',
+ 'enum', 'TCA_FLOWER_KEY_ETH_TYPE')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_TCA_FLOWER_KEY_ETH_DST',
+ 'linux/pkt_cls.h',
+ 'enum', 'TCA_FLOWER_KEY_ETH_DST')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_TCA_FLOWER_KEY_ETH_DST_MASK',
+ 'linux/pkt_cls.h',
+ 'enum', 'TCA_FLOWER_KEY_ETH_DST_MASK')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_TCA_FLOWER_KEY_ETH_SRC',
+ 'linux/pkt_cls.h',
+ 'enum', 'TCA_FLOWER_KEY_ETH_SRC')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_TCA_FLOWER_KEY_ETH_SRC_MASK',
+ 'linux/pkt_cls.h',
+ 'enum', 'TCA_FLOWER_KEY_ETH_SRC_MASK')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_TCA_FLOWER_KEY_IP_PROTO',
+ 'linux/pkt_cls.h',
+ 'enum', 'TCA_FLOWER_KEY_IP_PROTO')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_TCA_FLOWER_KEY_IPV4_SRC',
+ 'linux/pkt_cls.h',
+ 'enum', 'TCA_FLOWER_KEY_IPV4_SRC')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_TCA_FLOWER_KEY_IPV4_SRC_MASK',
+ 'linux/pkt_cls.h',
+ 'enum', 'TCA_FLOWER_KEY_IPV4_SRC_MASK')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_TCA_FLOWER_KEY_IPV4_DST',
+ 'linux/pkt_cls.h',
+ 'enum', 'TCA_FLOWER_KEY_IPV4_DST')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_TCA_FLOWER_KEY_IPV4_DST_MASK',
+ 'linux/pkt_cls.h',
+ 'enum', 'TCA_FLOWER_KEY_IPV4_DST_MASK')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_TCA_FLOWER_KEY_IPV6_SRC',
+ 'linux/pkt_cls.h',
+ 'enum', 'TCA_FLOWER_KEY_IPV6_SRC')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_TCA_FLOWER_KEY_IPV6_SRC_MASK',
+ 'linux/pkt_cls.h',
+ 'enum', 'TCA_FLOWER_KEY_IPV6_SRC_MASK')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_TCA_FLOWER_KEY_IPV6_DST',
+ 'linux/pkt_cls.h',
+ 'enum', 'TCA_FLOWER_KEY_IPV6_DST')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_TCA_FLOWER_KEY_IPV6_DST_MASK',
+ 'linux/pkt_cls.h',
+ 'enum', 'TCA_FLOWER_KEY_IPV6_DST_MASK')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_TCA_FLOWER_KEY_TCP_SRC',
+ 'linux/pkt_cls.h',
+ 'enum', 'TCA_FLOWER_KEY_TCP_SRC')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_TCA_FLOWER_KEY_TCP_SRC_MASK',
+ 'linux/pkt_cls.h',
+ 'enum', 'TCA_FLOWER_KEY_TCP_SRC_MASK')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_TCA_FLOWER_KEY_TCP_DST',
+ 'linux/pkt_cls.h',
+ 'enum', 'TCA_FLOWER_KEY_TCP_DST')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_TCA_FLOWER_KEY_TCP_DST_MASK',
+ 'linux/pkt_cls.h',
+ 'enum', 'TCA_FLOWER_KEY_TCP_DST_MASK')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_TCA_FLOWER_KEY_UDP_SRC',
+ 'linux/pkt_cls.h',
+ 'enum', 'TCA_FLOWER_KEY_UDP_SRC')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_TCA_FLOWER_KEY_UDP_SRC_MASK',
+ 'linux/pkt_cls.h',
+ 'enum', 'TCA_FLOWER_KEY_UDP_SRC_MASK')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_TCA_FLOWER_KEY_UDP_DST',
+ 'linux/pkt_cls.h',
+ 'enum', 'TCA_FLOWER_KEY_UDP_DST')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_TCA_FLOWER_KEY_UDP_DST_MASK',
+ 'linux/pkt_cls.h',
+ 'enum', 'TCA_FLOWER_KEY_UDP_DST_MASK')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_TCA_FLOWER_KEY_VLAN_ID',
+ 'linux/pkt_cls.h',
+ 'enum', 'TCA_FLOWER_KEY_VLAN_ID')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_TCA_FLOWER_KEY_VLAN_PRIO',
+ 'linux/pkt_cls.h',
+ 'enum', 'TCA_FLOWER_KEY_VLAN_PRIO')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_TCA_FLOWER_KEY_VLAN_ETH_TYPE',
+ 'linux/pkt_cls.h',
+ 'enum', 'TCA_FLOWER_KEY_VLAN_ETH_TYPE')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_TC_ACT_VLAN',
+ 'linux/tc_act/tc_vlan.h',
+ 'enum', 'TCA_VLAN_PUSH_VLAN_PRIORITY')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_SUPPORTED_40000baseKR4_Full',
+ '/usr/include/linux/ethtool.h',
+ 'define', 'SUPPORTED_40000baseKR4_Full')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_SUPPORTED_40000baseCR4_Full',
+ '/usr/include/linux/ethtool.h',
+ 'define', 'SUPPORTED_40000baseCR4_Full')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_SUPPORTED_40000baseSR4_Full',
+ '/usr/include/linux/ethtool.h',
+ 'define', 'SUPPORTED_40000baseSR4_Full')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_SUPPORTED_40000baseLR4_Full',
+ '/usr/include/linux/ethtool.h',
+ 'define', 'SUPPORTED_40000baseLR4_Full')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_SUPPORTED_56000baseKR4_Full',
+ '/usr/include/linux/ethtool.h',
+ 'define', 'SUPPORTED_56000baseKR4_Full')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_SUPPORTED_56000baseCR4_Full',
+ '/usr/include/linux/ethtool.h',
+ 'define', 'SUPPORTED_56000baseCR4_Full')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_SUPPORTED_56000baseSR4_Full',
+ '/usr/include/linux/ethtool.h',
+ 'define', 'SUPPORTED_56000baseSR4_Full')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+ r = run_command('sh', '../../../buildtools/auto-config-h.sh',
+ 'mlx5_autoconf.h',
+ 'HAVE_SUPPORTED_56000baseLR4_Full',
+ '/usr/include/linux/ethtool.h',
+ 'define', 'SUPPORTED_56000baseLR4_Full')
+ if r.returncode() != 0
+ error('autoconfiguration fail')
+ endif
+endif
+# Build Glue Library
+if pmd_dlopen
+ dlopen_name = 'mlx5_glue'
+ dlopen_lib_name = driver_name_fmt.format(dlopen_name)
+ dlopen_so_version = LIB_GLUE_VERSION
+ dlopen_sources = files('mlx5_glue.c')
+ dlopen_install_dir = [ eal_pmd_path + '-glue' ]
+ shared_lib = shared_library(
+ dlopen_lib_name,
+ dlopen_sources,
+ include_directories: global_inc,
+ c_args: cflags,
+ link_args: [
+ '-Wl,-export-dynamic',
+ '-Wl,-h,@0@'.format(LIB_GLUE),
+ '-lmlx5',
+ '-libverbs',
+ ],
+ soversion: dlopen_so_version,
+ install: true,
+ install_dir: dlopen_install_dir,
+ )
+endif
diff --git a/meson_options.txt b/meson_options.txt
index c84327858..a1ae0cabc 100644
--- a/meson_options.txt
+++ b/meson_options.txt
@@ -22,3 +22,11 @@ option('use_hpet', type: 'boolean', value: false,
description: 'use HPET timer in EAL')
option('tests', type: 'boolean', value: true,
description: 'build unit tests')
+option('enable_driver_mlx5', type: 'boolean', value: false,
+ description: 'Enable Mellanox PMD for ConnectX-4/5 NIC')
+option('enable_driver_mlx5_glue', type: 'boolean', value: false,
+ description: 'Enable Mellanox PMD for ConnectX-4/5 NIC glue library')
+option('enable_driver_mlx4', type: 'boolean', value: false,
+ description: 'Enable Mellanox PMD for ConnectX-3 NIC')
+option('enable_driver_mlx4_glue', type: 'boolean', value: false,
+ description: 'Enable Mellanox PMD for ConnectX-3 NIC glue library')
--
2.18.0
