From: Hyong Youb Kim <[email protected]>
The NIC indicates VLAN TCI to the driver even when VLAN stripping is
disabled. The driver sets mbuf's vlan_tci but not PKT_RX_VLAN. Set
PKT_RX_VLAN to indicate that vlan_tci is valid.
Fixes: c6f455507411 ("net/enic: add ethernet VLAN packet type")
Cc: [email protected]
Signed-off-by: Hyong Youb Kim <[email protected]>
Reviewed-by: John Daley <[email protected]>
---
drivers/net/enic/enic_rxtx.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/enic/enic_rxtx.c b/drivers/net/enic/enic_rxtx.c
index 7129e1217..0eb113d75 100644
--- a/drivers/net/enic/enic_rxtx.c
+++ b/drivers/net/enic/enic_rxtx.c
@@ -233,10 +233,12 @@ enic_cq_rx_to_pkt_flags(struct cq_desc *cqd, struct
rte_mbuf *mbuf)
pkt_flags |= PKT_RX_VLAN | PKT_RX_VLAN_STRIPPED;
mbuf->packet_type |= RTE_PTYPE_L2_ETHER;
} else {
- if (vlan_tci != 0)
+ if (vlan_tci != 0) {
+ pkt_flags |= PKT_RX_VLAN;
mbuf->packet_type |= RTE_PTYPE_L2_ETHER_VLAN;
- else
+ } else {
mbuf->packet_type |= RTE_PTYPE_L2_ETHER;
+ }
}
mbuf->vlan_tci = vlan_tci;
--
2.16.2
