> -----Original Message-----
> From: dev [mailto:dev-boun...@dpdk.org] On Behalf Of Zhao1, Wei
> Sent: Monday, November 19, 2018 7:29 PM
> To: Player, Timmons <timmons.pla...@spirent.com>
> Cc: dev@dpdk.org; Lu, Wenzhuo <wenzhuo...@intel.com>
> Subject: Re: [dpdk-dev] [PATCH v2] net/igb: fix LSC interrupt when using MSI-X
>
> Acked-by: Wei Zhao <wei.zh...@intel.com>
Applied to dpdk-next-net-intel.
Thanks
Qi
>
> > -----Original Message-----
> > From: dev [mailto:dev-boun...@dpdk.org] On Behalf Of Player, Timmons
> > Sent: Monday, November 19, 2018 10:49 PM
> > To: Lu, Wenzhuo <wenzhuo...@intel.com>
> > Cc: dev@dpdk.org; Player, Timmons <timmons.pla...@spirent.com>
> > Subject: [dpdk-dev] [PATCH v2] net/igb: fix LSC interrupt when using
> > MSI-X
> >
> > Take the 'other interrupt' into account when setting up MSI-X
> > interrupts and use the proper mask when enabling it.
> > Also, rearm the MSI-X vector after the LSC interrupt fires.
> >
> > This change allows both LSC and RXQ interrupts to work at the same
> > time when using MSI-X interrupts.
> >
> > Signed-off-by: Timmons C. Player <timmons.pla...@spirent.com>
> > ---
> > v2:
> > * Update igb_intr_{enable,disable} to only touch the 'other interrupt'
> > when it is explicitly enabled.
> >
> > drivers/net/e1000/igb_ethdev.c | 43 +++++++++++++++++++++++++++++-
> > ----
> > 1 file changed, 37 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/net/e1000/igb_ethdev.c
> > b/drivers/net/e1000/igb_ethdev.c index d9d29d22f..87c9aedf2 100644
> > --- a/drivers/net/e1000/igb_ethdev.c
> > +++ b/drivers/net/e1000/igb_ethdev.c
> > @@ -68,6 +68,9 @@
> > #define E1000_VET_VET_EXT 0xFFFF0000
> > #define E1000_VET_VET_EXT_SHIFT 16
> >
> > +/* MSI-X other interrupt vector */
> > +#define IGB_MSIX_OTHER_INTR_VEC 0
> > +
> > static int eth_igb_configure(struct rte_eth_dev *dev); static int
> > eth_igb_start(struct rte_eth_dev *dev); static void
> > eth_igb_stop(struct rte_eth_dev *dev); @@ -138,7 +141,7 @@ static void
> > igb_vlan_hw_extend_disable(struct rte_eth_dev *dev); static int
> > eth_igb_led_on(struct rte_eth_dev *dev); static int
> > eth_igb_led_off(struct rte_eth_dev *dev);
> >
> > -static void igb_intr_disable(struct e1000_hw *hw);
> > +static void igb_intr_disable(struct rte_eth_dev *dev);
> > static int igb_get_rx_buffer_size(struct e1000_hw *hw); static int
> > eth_igb_rar_set(struct rte_eth_dev *dev,
> > struct ether_addr *mac_addr,
> > @@ -538,14 +541,31 @@ igb_intr_enable(struct rte_eth_dev *dev)
> > E1000_DEV_PRIVATE_TO_INTR(dev->data->dev_private);
> > struct e1000_hw *hw =
> > E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
> > + struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
> > + struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
> > +
> > + if (rte_intr_allow_others(intr_handle) &&
> > + dev->data->dev_conf.intr_conf.lsc != 0) {
> > + E1000_WRITE_REG(hw, E1000_EIMS, 1 <<
> > IGB_MSIX_OTHER_INTR_VEC);
> > + }
> >
> > E1000_WRITE_REG(hw, E1000_IMS, intr->mask);
> > E1000_WRITE_FLUSH(hw);
> > }
> >
> > static void
> > -igb_intr_disable(struct e1000_hw *hw)
> > +igb_intr_disable(struct rte_eth_dev *dev)
> > {
> > + struct e1000_hw *hw =
> > + E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
> > + struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
> > + struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
> > +
> > + if (rte_intr_allow_others(intr_handle) &&
> > + dev->data->dev_conf.intr_conf.lsc != 0) {
> > + E1000_WRITE_REG(hw, E1000_EIMC, 1 <<
> > IGB_MSIX_OTHER_INTR_VEC);
> > + }
> > +
> > E1000_WRITE_REG(hw, E1000_IMC, ~0);
> > E1000_WRITE_FLUSH(hw);
> > }
> > @@ -1486,7 +1506,7 @@ eth_igb_stop(struct rte_eth_dev *dev)
> >
> > eth_igb_rxtx_control(dev, false);
> >
> > - igb_intr_disable(hw);
> > + igb_intr_disable(dev);
> >
> > /* disable intr eventfd mapping */
> > rte_intr_disable(intr_handle);
> > @@ -2768,12 +2788,15 @@ static int eth_igb_rxq_interrupt_setup(struct
> > rte_eth_dev *dev)
> > uint32_t mask, regval;
> > struct e1000_hw *hw =
> > E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
> > + struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
> > + struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
> > + int misc_shift = rte_intr_allow_others(intr_handle) ? 1 : 0;
> > struct rte_eth_dev_info dev_info;
> >
> > memset(&dev_info, 0, sizeof(dev_info));
> > eth_igb_infos_get(dev, &dev_info);
> >
> > - mask = 0xFFFFFFFF >> (32 - dev_info.max_rx_queues);
> > + mask = (0xFFFFFFFF >> (32 - dev_info.max_rx_queues)) <<
> > misc_shift;
> > regval = E1000_READ_REG(hw, E1000_EIMS);
> > E1000_WRITE_REG(hw, E1000_EIMS, regval | mask);
> >
> > @@ -2800,7 +2823,7 @@ eth_igb_interrupt_get_status(struct rte_eth_dev
> > *dev)
> > struct e1000_interrupt *intr =
> > E1000_DEV_PRIVATE_TO_INTR(dev->data->dev_private);
> >
> > - igb_intr_disable(hw);
> > + igb_intr_disable(dev);
> >
> > /* read-on-clear nic registers here */
> > icr = E1000_READ_REG(hw, E1000_ICR); @@ -5583,13 +5606,17 @@
> > eth_igb_configure_msix_intr(struct rte_eth_dev
> > *dev)
> > E1000_GPIE_NSICR);
> > intr_mask = RTE_LEN2MASK(intr_handle->nb_efd, uint32_t) <<
> > misc_shift;
> > +
> > + if (dev->data->dev_conf.intr_conf.lsc != 0)
> > + intr_mask |= (1 << IGB_MSIX_OTHER_INTR_VEC);
> > +
> > regval = E1000_READ_REG(hw, E1000_EIAC);
> > E1000_WRITE_REG(hw, E1000_EIAC, regval | intr_mask);
> >
> > /* enable msix_other interrupt */
> > regval = E1000_READ_REG(hw, E1000_EIMS);
> > E1000_WRITE_REG(hw, E1000_EIMS, regval | intr_mask);
> > - tmpval = (dev->data->nb_rx_queues | E1000_IVAR_VALID)
> > << 8;
> > + tmpval = (IGB_MSIX_OTHER_INTR_VEC | E1000_IVAR_VALID)
> > << 8;
> > E1000_WRITE_REG(hw, E1000_IVAR_MISC, tmpval);
> > }
> >
> > @@ -5598,6 +5625,10 @@ eth_igb_configure_msix_intr(struct rte_eth_dev
> > *dev)
> > */
> > intr_mask = RTE_LEN2MASK(intr_handle->nb_efd, uint32_t) <<
> > misc_shift;
> > +
> > + if (dev->data->dev_conf.intr_conf.lsc != 0)
> > + intr_mask |= (1 << IGB_MSIX_OTHER_INTR_VEC);
> > +
> > regval = E1000_READ_REG(hw, E1000_EIAM);
> > E1000_WRITE_REG(hw, E1000_EIAM, regval | intr_mask);
> >
> > --
> > 2.17.1
