The rule "install" follows these conventions:
http://gnu.org/prep/standards/html_node/Directory-Variables.html
http://gnu.org/prep/standards/html_node/DESTDIR.html
The variable sdkdir has been added to the more standards ones,
to configure the directory used with RTE_SDK when using the DPDK makefiles
to build an application.
It is still possible to build DPDK with the "install T=" rule without
specifying any DESTDIR. In such case there is no install, as before.
The old usage of an installed SDK is:
make -C examples/helloworld RTE_SDK=$(readlink -m $DESTDIR) \
RTE_TARGET=x86_64-native-linuxapp-gcc
RTE_TARGET can be specified but is useless now with an installed SDK.
The RTE_SDK directory must now point to a different path depending of
the installation.
Signed-off-by: Thomas Monjalon <thomas.monjalon at 6wind.com>
Acked-by: Panu Matilainen <pmatilai at redhat.com>
---
doc/build-sdk-quick.txt | 1 +
doc/guides/prog_guide/dev_kit_root_make_help.rst | 6 ++-
mk/internal/rte.extvars.mk | 4 ++
mk/rte.sdkinstall.mk | 59 ++++++++++++++++++------
mk/rte.vars.mk | 10 +---
5 files changed, 58 insertions(+), 22 deletions(-)
diff --git a/doc/build-sdk-quick.txt b/doc/build-sdk-quick.txt
index b5f752e..662ef63 100644
--- a/doc/build-sdk-quick.txt
+++ b/doc/build-sdk-quick.txt
@@ -19,6 +19,7 @@ Build variables
D debug dependencies
O build directory (default: build/ - install default: ./)
DESTDIR second-stage install directory
+ prefix root install directory
T target template - used with config or install
format: <arch-machine-execenv-toolchain>
templates in config/defconfig_*
diff --git a/doc/guides/prog_guide/dev_kit_root_make_help.rst
b/doc/guides/prog_guide/dev_kit_root_make_help.rst
index 458fc91..b0429d8 100644
--- a/doc/guides/prog_guide/dev_kit_root_make_help.rst
+++ b/doc/guides/prog_guide/dev_kit_root_make_help.rst
@@ -111,11 +111,15 @@ Install Targets
The name of the target to install is specified using T=mytarget.
The list of available targets are in $(RTE_SDK)/config (remove the
defconfig\_ prefix).
+ The GNU standards variables may be used:
+ http://gnu.org/prep/standards/html_node/Directory-Variables.html and
+ http://gnu.org/prep/standards/html_node/DESTDIR.html
+
Example:
.. code-block:: console
- make install T=x86_64-native-linuxapp-gcc
+ make install T=x86_64-native-linuxapp-gcc prefix=/usr
Test Targets
------------
diff --git a/mk/internal/rte.extvars.mk b/mk/internal/rte.extvars.mk
index e248d19..040d39f 100644
--- a/mk/internal/rte.extvars.mk
+++ b/mk/internal/rte.extvars.mk
@@ -51,7 +51,11 @@ endif
RTE_EXTMK ?= $(RTE_SRCDIR)/Makefile
export RTE_EXTMK
+# RTE_SDK_BIN must point to .config, include/ and lib/.
RTE_SDK_BIN := $(RTE_SDK)/$(RTE_TARGET)
+ifeq ($(wildcard $(RTE_SDK_BIN)/.config),)
+$(error Cannot find .config in $(RTE_SDK))
+endif
#
# Output files wil go in a separate directory: default output is
diff --git a/mk/rte.sdkinstall.mk b/mk/rte.sdkinstall.mk
index c5d0881..3201b5b 100644
--- a/mk/rte.sdkinstall.mk
+++ b/mk/rte.sdkinstall.mk
@@ -1,6 +1,7 @@
# BSD LICENSE
#
# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+# Copyright 2015 6WIND S.A.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
@@ -36,6 +37,25 @@
O ?= .
RTE_OUTPUT := $O/$T
+prefix ?= /usr/local
+exec_prefix ?= $(prefix)
+bindir ?= $(exec_prefix)/bin
+libdir ?= $(exec_prefix)/lib
+includedir ?= $(prefix)/include/dpdk
+datarootdir ?= $(prefix)/share
+datadir ?= $(datarootdir)/dpdk
+sdkdir ?= $(datadir)
+targetdir ?= $(datadir)/$(RTE_TARGET)
+
+# The install directories may be staged in DESTDIR
+
+# Create the directory $1 if not exists
+rte_mkdir = test -d $1 || mkdir -p $1
+
+# Create the relative symbolic link $2 -> $1
+# May be replaced with --relative option of ln from coreutils-8.16
+rte_symlink = ln -snf $$($(RTE_SDK)/scripts/relpath.sh $1 $(dir $2)) $2
+
.PHONY: pre_install
pre_install:
$(Q)if [ ! -f $(RTE_OUTPUT)/.config ]; then \
@@ -57,16 +77,29 @@ pre_install:
.PHONY: install
install:
- @echo ================== Installing $(DESTDIR)
- $(Q)mkdir -p $(DESTDIR)
- $(Q)tar -C $(RTE_SDK) -cf - mk scripts/*.sh | tar -C $(DESTDIR) -x \
- --keep-newer-files --warning=no-ignore-newer -f -
- $(Q)mkdir -p $(DESTDIR)/$T
- $(Q)tar -C $(RTE_OUTPUT) -chf - \
- --exclude app --exclude hostapp --exclude build \
- --exclude Makefile --exclude .depdirs . | \
- tar -C $(DESTDIR)/$T -x --keep-newer-files \
- --warning=no-ignore-newer -f -
- $(Q)install -D $(RTE_OUTPUT)/app/testpmd \
- $(DESTDIR)/$T/app/testpmd
- @echo Installation in $(DESTDIR) complete
+ifeq ($(DESTDIR)$(if $T,,+),)
+ @echo Installation cannot run with T defined and DESTDIR undefined
+else
+ @echo ================== Installing $(DESTDIR)$(prefix)/
+ $(Q)$(call rte_mkdir, $(DESTDIR)$(libdir))
+ $(Q)cp -a $(RTE_OUTPUT)/lib/* $(DESTDIR)$(libdir)
+ $(Q)$(call rte_mkdir, $(DESTDIR)$(bindir))
+ $(Q)tar -cf - -C $(RTE_OUTPUT) app --exclude 'app/*.map' \
+ --exclude 'app/cmdline*' --exclude app/test \
+ --exclude app/testacl --exclude app/testpipeline | \
+ tar -xf - -C $(DESTDIR)$(bindir) --strip-components=1 \
+ --keep-newer-files --warning=no-ignore-newer
+ $(Q)$(call rte_mkdir, $(DESTDIR)$(datadir))
+ $(Q)cp -a $(RTE_SDK)/tools $(DESTDIR)$(datadir)
+ $(Q)$(call rte_mkdir, $(DESTDIR)$(includedir))
+ $(Q)tar -chf - -C $(RTE_OUTPUT) include | \
+ tar -xf - -C $(DESTDIR)$(includedir) --strip-components=1 \
+ --keep-newer-files --warning=no-ignore-newer
+ $(Q)$(call rte_mkdir, $(DESTDIR)$(sdkdir))
+ $(Q)cp -a $(RTE_SDK)/{mk,scripts} $(DESTDIR)$(sdkdir)
+ $(Q)$(call rte_mkdir, $(DESTDIR)$(targetdir))
+ $(Q)cp -a $(RTE_OUTPUT)/.config $(DESTDIR)$(targetdir)
+ $(Q)$(call rte_symlink, $(DESTDIR)$(includedir),
$(DESTDIR)$(targetdir)/include)
+ $(Q)$(call rte_symlink, $(DESTDIR)$(libdir),
$(DESTDIR)$(targetdir)/lib)
+ @echo Installation in $(DESTDIR)$(prefix)/ complete
+endif
diff --git a/mk/rte.vars.mk b/mk/rte.vars.mk
index f87cf4b..7e7ee14 100644
--- a/mk/rte.vars.mk
+++ b/mk/rte.vars.mk
@@ -61,18 +61,12 @@ ifneq ($(BUILDING_RTE_SDK),)
RTE_MACHINE := $(CONFIG_RTE_MACHINE:"%"=%)
RTE_EXEC_ENV := $(CONFIG_RTE_EXEC_ENV:"%"=%)
RTE_TOOLCHAIN := $(CONFIG_RTE_TOOLCHAIN:"%"=%)
- RTE_TARGET := $(RTE_ARCH)-$(RTE_MACHINE)-$(RTE_EXEC_ENV)-$(RTE_TOOLCHAIN)
RTE_SDK_BIN := $(RTE_OUTPUT)
endif
-RTE_LIBNAME := dpdk
+RTE_TARGET ?= $(RTE_ARCH)-$(RTE_MACHINE)-$(RTE_EXEC_ENV)-$(RTE_TOOLCHAIN)
-# RTE_TARGET is deducted from config when we are building the SDK.
-# Else, when building an external app, RTE_TARGET must be specified
-# by the user.
-ifeq ($(RTE_TARGET),)
-$(error RTE_TARGET is not defined)
-endif
+RTE_LIBNAME := dpdk
ifeq ($(BUILDING_RTE_SDK),)
# if we are building an external app/lib, include internal/rte.extvars.mk that
will
--
2.5.2
