> -----Original Message-----
> From: Dekel Peled <[email protected]>
> Sent: Thursday, October 24, 2019 15:47
> To: Matan Azrad <[email protected]>; Slava Ovsiienko
> <[email protected]>; Shahaf Shuler <[email protected]>
> Cc: Ori Kam <[email protected]>; [email protected]; [email protected]
> Subject: [PATCH] net/mlx5: fix LRO dependency to include DV flow
>
> Rx queue for LRO is created using DevX. Flows created on this queue must
> use the DV flow engine.
>
> This patch adds check of dv_flow_en=1 when configuring LRO support on
> device spawn.
> Documentation is updated accordingly.
>
> Fixes: 175f1c21d033 ("net/mlx5: check conditions to enable LRO")
> Cc: [email protected]
>
> Signed-off-by: Dekel Peled <[email protected]>
Acked-by: Viacheslav Ovsiienko <[email protected]>
> ---
> doc/guides/nics/mlx5.rst | 2 +-
> drivers/net/mlx5/mlx5.c | 3 ++-
> 2 files changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst index
> 600cea7..45fa968 100644
> --- a/doc/guides/nics/mlx5.rst
> +++ b/doc/guides/nics/mlx5.rst
> @@ -203,7 +203,7 @@ Limitations
>
> - LRO:
>
> - - Requires DevX to be enabled.
> + - Requires DevX and DV flow to be enabled.
> - KEEP_CRC offload cannot be supported with LRO.
> - The first mbuf length, without head-room, must be big enough to include
> the
> TCP header (122B).
> diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c index
> b99c5a9..5977d06 100644
> --- a/drivers/net/mlx5/mlx5.c
> +++ b/drivers/net/mlx5/mlx5.c
> @@ -2033,7 +2033,8 @@ struct mlx5_dev_spawn_data {
> if (priv->counter_fallback)
> DRV_LOG(INFO, "Use fall-back DV counter
> management\n");
> /* Check for LRO support. */
> - if (config.dest_tir && config.hca_attr.lro_cap) {
> + if (config.dest_tir && config.hca_attr.lro_cap &&
> + config.dv_flow_en) {
> /* TBD check tunnel lro caps. */
> config.lro.supported = config.hca_attr.lro_cap;
> DRV_LOG(DEBUG, "Device supports LRO");
> --
> 1.8.3.1
