Hi All,
I am running pktgen application using the below command and in the pktgen window I am getting ?Src MAC Address? same as for port 0 and port1. Command - ./pktgen -c 0xf -n 2 -- -p 0x3 -m {1:3}.0,{2:1}.1 I have configured destination mac address for port 0 and port 1 as per the mac address on the other machine. Issue ? Source Mac address is coming as same for port 0 and 1 (as shown in the below dump) | Ports 0-1 of 2 ** Main Page ** Copyright (c) <2010-2014>, Wind River Systems, Inc. All rights reserved. Pow Flags:Port : --------------:0 --------------:1 Link State : <UP-1000-FD> <UP-1000-FD> ---TotalRate--- Pkts/s Rx : 1 0 1 Tx : 0 0 0 MBits/s Rx/Tx : 0/0 0/0 0/0 Broadcast : 0 0 Multicast : 0 0 64 Bytes : 0 0 65-127 : 0 0 128-255 : 0 0 256-511 : 0 0 512-1023 : 0 0 1024-1518 : 0 0 Runts/Jumbos : 0/0 0/0 Errors Rx/Tx : 0/0 0/0 Total Rx Pkts : 26 0 Tx Pkts : 0 0 Rx MBs : 0 0 Tx MBs : 0 0 ARP/ICMP Pkts : 0/0 0/0 : Tx Count/% Rate : Forever/100% Forever/100% PktSize/Tx Burst: 64/32 64/32 Src/Dest Port : 1234/5678 1234/5678 Pkt Type:VLAN ID: IPv4/TCP:0001 IPv4/TCP:0001 Dst IP Address : 192.168.1.1 192.168.0.1 Src IP Address : 192.168.0.1/24 192.168.1.1/24 Dst MAC Address : 00:1b:21:65:db:2d 00:1b:21:65:db:2c Src MAC Address : 00:07:e9:a5:b2:0d 00:07:e9:a5:b2:0d -- Pktgen Ver:2.7.7(DPDK-1.7.1) --------------------------------------------------------------------------- NIC Info ? Intel 82546EB Gigabit Ethernet Regards, Vikrant