On 2015/02/11 0:08, Iremonger, Bernard wrote:
>> -----Original Message-----
>> From: Qiu, Michael
>> Sent: Monday, February 9, 2015 1:10 PM
>> To: Tetsuya Mukawa; dev at dpdk.org
>> Cc: Iremonger, Bernard
>> Subject: Re: [PATCH v7 04/14] eal/pci: Consolidate pci address comparison
>> APIs
>>
>> On 2/9/2015 4:31 PM, Tetsuya Mukawa wrote:
>>> This patch replaces pci_addr_comparison() and memcmp() of pci
>>> addresses by eal_compare_pci_addr().
>>>
>>> v5:
>>> - Fix pci_scan_one to handle pt_driver correctly.
>>> v4:
>>> - Fix calculation method of eal_compare_pci_addr().
>>> - Add parameter checking.
>>>
>>> Signed-off-by: Tetsuya Mukawa <mukawa at igel.co.jp>
>>> ---
>>> lib/librte_eal/bsdapp/eal/eal_pci.c | 25 ++++++++---------------
>>> lib/librte_eal/common/eal_common_pci.c | 2 +-
>>> lib/librte_eal/common/include/rte_pci.h | 34
>>> +++++++++++++++++++++++++++++++
>>> lib/librte_eal/linuxapp/eal/eal_pci.c | 25 ++++++++---------------
>>> lib/librte_eal/linuxapp/eal/eal_pci_uio.c | 2 +-
>>> 5 files changed, 54 insertions(+), 34 deletions(-)
>>>
>>> diff --git a/lib/librte_eal/bsdapp/eal/eal_pci.c
>>> b/lib/librte_eal/bsdapp/eal/eal_pci.c
>>> index 74ecce7..c844d58 100644
>>> --- a/lib/librte_eal/bsdapp/eal/eal_pci.c
>>> +++ b/lib/librte_eal/bsdapp/eal/eal_pci.c
>>> @@ -270,20 +270,6 @@ pci_uio_map_resource(struct rte_pci_device *dev)
>>> return (0);
>>> }
>>>
>>> -/* Compare two PCI device addresses. */ -static int
>>> -pci_addr_comparison(struct rte_pci_addr *addr, struct rte_pci_addr
>>> *addr2) -{
>>> - uint64_t dev_addr = (addr->domain << 24) + (addr->bus << 16) +
>>> (addr->devid << 8) + addr-
>>> function;
>>> - uint64_t dev_addr2 = (addr2->domain << 24) + (addr2->bus << 16) +
>>> (addr2->devid << 8) +
>> addr2->function;
>>> -
>>> - if (dev_addr > dev_addr2)
>>> - return 1;
>>> - else
>>> - return 0;
>>> -}
>>> -
>>> -
>>> /* Scan one pci sysfs entry, and fill the devices list from it. */
>>> static int pci_scan_one(int dev_pci_fd, struct pci_conf *conf) @@
>>> -356,13 +342,20 @@ pci_scan_one(int dev_pci_fd, struct pci_conf *conf)
>>> }
>>> else {
>>> struct rte_pci_device *dev2 = NULL;
>>> + int ret;
>>>
>>> TAILQ_FOREACH(dev2, &pci_device_list, next) {
>>> - if (pci_addr_comparison(&dev->addr, &dev2->addr))
>>> + ret = eal_compare_pci_addr(&dev->addr, &dev2->addr);
>>> + if (ret > 0)
>>> continue;
>>> - else {
>>> + else if (ret < 0) {
>>> TAILQ_INSERT_BEFORE(dev2, dev, next);
>>> return 0;
>>> + } else { /* already registered */
>>> + /* update pt_driver */
>>> + dev2->pt_driver = dev->pt_driver;
>>> + free(dev);
>>> + return 0;
>>> }
>>> }
>>> TAILQ_INSERT_TAIL(&pci_device_list, dev, next); diff --git
>>> a/lib/librte_eal/common/eal_common_pci.c
>>> b/lib/librte_eal/common/eal_common_pci.c
>>> index f3c7f71..a89f5c3 100644
>>> --- a/lib/librte_eal/common/eal_common_pci.c
>>> +++ b/lib/librte_eal/common/eal_common_pci.c
>>> @@ -93,7 +93,7 @@ static struct rte_devargs *pci_devargs_lookup(struct
>>> rte_pci_device *dev)
>>> if (devargs->type != RTE_DEVTYPE_BLACKLISTED_PCI &&
>>> devargs->type != RTE_DEVTYPE_WHITELISTED_PCI)
>>> continue;
>>> - if (!memcmp(&dev->addr, &devargs->pci.addr, sizeof(dev->addr)))
>>> + if (!eal_compare_pci_addr(&dev->addr, &devargs->pci.addr))
>>> return devargs;
>>> }
>>> return NULL;
>>> diff --git a/lib/librte_eal/common/include/rte_pci.h
>>> b/lib/librte_eal/common/include/rte_pci.h
>>> index 7f2d699..4814cd7 100644
>>> --- a/lib/librte_eal/common/include/rte_pci.h
>>> +++ b/lib/librte_eal/common/include/rte_pci.h
>>> @@ -269,6 +269,40 @@ eal_parse_pci_DomBDF(const char *input, struct
>>> rte_pci_addr *dev_addr) } #undef GET_PCIADDR_FIELD
>>>
>>> +/* Compare two PCI device addresses. */
>>> +/**
>>> + * Utility function to compare two PCI device addresses.
>>> + *
>>> + * @param addr
>>> + * The PCI Bus-Device-Function address to compare
>>> + * @param addr2
>>> + * The PCI Bus-Device-Function address to compare
>>> + * @return
>>> + * 0 on equal PCI address.
>>> + * Positive on addr is greater than addr2.
>>> + * Negative on addr is less than addr2, or error.
>>> + */
>>> +static inline int
>>> +eal_compare_pci_addr(struct rte_pci_addr *addr, struct rte_pci_addr
>>> +*addr2) {
>>> + uint64_t dev_addr, dev_addr2;
>>> +
>>> + if ((addr == NULL) || (addr2 == NULL))
>>> + return -1;
>>> +
>>> + dev_addr = (addr->domain << 24) | (addr->bus << 16) |
>>> + (addr->devid << 8) | addr->function;
>>> + dev_addr2 = (addr2->domain << 24) | (addr2->bus << 16) |
>>> + (addr2->devid << 8) | addr2->function;
>>> +
>>> + if (dev_addr > dev_addr2)
>>> + return 1;
>>> + else if (dev_addr < dev_addr2)
>>> + return -1;
>>> + else
>>> + return 0;
>>> +}
>>> +
>>> /**
>>> * Probe the PCI bus for registered drivers.
>>> *
>>> diff --git a/lib/librte_eal/linuxapp/eal/eal_pci.c
>>> b/lib/librte_eal/linuxapp/eal/eal_pci.c
>>> index c0ca5a5..d847102 100644
>>> --- a/lib/librte_eal/linuxapp/eal/eal_pci.c
>>> +++ b/lib/librte_eal/linuxapp/eal/eal_pci.c
>>> @@ -229,20 +229,6 @@ error:
>>> return -1;
>>> }
>>>
>>> -/* Compare two PCI device addresses. */ -static int
>>> -pci_addr_comparison(struct rte_pci_addr *addr, struct rte_pci_addr
>>> *addr2) -{
>>> - uint64_t dev_addr = (addr->domain << 24) + (addr->bus << 16) +
>>> (addr->devid << 8) + addr-
>>> function;
>>> - uint64_t dev_addr2 = (addr2->domain << 24) + (addr2->bus << 16) +
>>> (addr2->devid << 8) +
>> addr2->function;
>>> -
>>> - if (dev_addr > dev_addr2)
>>> - return 1;
>>> - else
>>> - return 0;
>>> -}
>>> -
>>> -
>>> /* Scan one pci sysfs entry, and fill the devices list from it. */
>>> static int pci_scan_one(const char *dirname, uint16_t domain, uint8_t
>>> bus, @@ -353,13 +339,20 @@ pci_scan_one(const char *dirname, uint16_t
>>> domain, uint8_t bus,
>>> }
>>> else {
>>> struct rte_pci_device *dev2 = NULL;
>>> + int ret;
>>>
>>> TAILQ_FOREACH(dev2, &pci_device_list, next) {
>>> - if (pci_addr_comparison(&dev->addr, &dev2->addr))
>>> + ret = eal_compare_pci_addr(&dev->addr, &dev2->addr);
>>> + if (ret > 0)
>>> continue;
>>> - else {
>>> + else if (ret < 0) {
>>> TAILQ_INSERT_BEFORE(dev2, dev, next);
>>> return 0;
>>> + } else { /* already registered */
>>> + /* update pt_driver */
>>> + dev2->pt_driver = dev->pt_driver;
> Hi Tetsuya,
>
> I am seeing a problem with the librte_pmd_ixgbe code where dev->max_vfs is
> being lost in some scenarios.
> The following line should be added here:
> dev2->max_vfs = dev->max_vfs;
>
> numa_mode should probably be updated too (although it is not causing a
> problem at present).
> dev2->numa_mode = dev->numa_mode;
Hi Bernard,
Thanks for reporting. I will add above 2 lines.
Regards,
Tetsuya
> Regards,
>
> Bernard.
>
>
>
>
>>> + free(dev);
>>> + return 0;
>>> }
>>> }
>>> TAILQ_INSERT_TAIL(&pci_device_list, dev, next); diff --git
>>> a/lib/librte_eal/linuxapp/eal/eal_pci_uio.c
>>> b/lib/librte_eal/linuxapp/eal/eal_pci_uio.c
>>> index e53f06b..1da3507 100644
>>> --- a/lib/librte_eal/linuxapp/eal/eal_pci_uio.c
>>> +++ b/lib/librte_eal/linuxapp/eal/eal_pci_uio.c
>>> @@ -123,7 +123,7 @@ pci_uio_map_secondary(struct rte_pci_device *dev)
>>> TAILQ_FOREACH(uio_res, pci_res_list, next) {
>>>
>>> /* skip this element if it doesn't match our PCI address */
>>> - if (memcmp(&uio_res->pci_addr, &dev->addr, sizeof(dev->addr)))
>>> + if (eal_compare_pci_addr(&uio_res->pci_addr, &dev->addr))
>>> continue;
>>>
>>> for (i = 0; i != uio_res->nb_maps; i++) {
>> Acked-by: Michael Qiu <michael.qiu at intel.com>
