On Fri, Jan 3, 2020 at 11:38 AM Suanming Mou <suanmi...@mellanox.com> wrote: > > Hello Tonghao, > > Could you please explain much detail about your issue scenario? > > If I understand correctly, you are trying to create two flows with the two > same match criteria? > > Example from testpmd just like that: > add port meter profile srtcm_rfc2697 0 24 65536 32768 0 > create port meter 0 0 24 yes G Y D 0xffff 1 0 > flow create 0 ingress pattern eth / end actions jump group 1 / end > flow create 0 priority 3 group 1 ingress pattern eth / end actions meter > mtr_id 0 / queue index 0 / end > flow create 0 priority 3 group 1 ingress pattern eth / end actions meter > mtr_id 0 / queue index 1 / end > > Then the third flow will report "hardware refuses to create flow: Invalid > argument". > > Please correct me if I'm wrong. > And better to give the issue reproduce method via testpmd cmdline. ./testpmd -l 0-3 -n 4 -w 0000:82:00.0 -w 0000:82:00.1 -- -i --portmask=0x3 --rxq=2 --nb-cores=2
add port meter profile srtcm_rfc2697 0 100 1024 1024 0 add port meter profile srtcm_rfc2697 0 101 2048 2048 0 create port meter 0 100 100 yes G Y D 0xffff 1 0 create port meter 0 101 101 yes G Y D 0xffff 1 0 flow create 0 ingress pattern eth / end actions jump group 1 / end flow create 0 group 1 priority 3 ingress pattern eth / ipv4 dst is 1.1.1.100 / end actions meter mtr_id 100 / queue index 0 / end The one of commands below will run fail: flow create 0 group 1 priority 3 ingress pattern eth / ipv4 dst is 1.1.1.200 / end actions meter mtr_id 101 / queue index 1 / end flow create 0 group 1 priority 3 ingress pattern eth / ipv4 dst is 1.1.1.200 / tcp dst is 80 / end actions meter mtr_id 101 / queue index 1 / end flow create 0 group 1 priority 3 ingress pattern eth / ipv4 / tcp dst is 80 / end actions meter mtr_id 101 / queue index 1 / end Caught error type 1 (cause unspecified): hardware refuses to create flow: Invalid argument And with this patch, it works fine. > Thanks > SuanmingMou > > > -----Original Message----- > > From: Tonghao Zhang <xiangxia.m....@gmail.com> > > Sent: Thursday, December 19, 2019 6:00 PM > > To: Suanming Mou <suanmi...@mellanox.com> > > Cc: dev@dpdk.org; sta...@dpdk.org > > Subject: Re: [PATCH] net/mlx5: allow install more meter actions > > > > ping > > > > On Tue, Dec 17, 2019 at 3:29 PM <xiangxia.m....@gmail.com> wrote: > > > > > > From: Tonghao Zhang <xiangxia.m....@gmail.com> > > > > > > When creating the dr rule of meter, the matcher which struct is > > > "struct mlx5dv_dr_matcher" should not be shared, if shared, > > > mlx5dv_dr_rule_create will return NULL. We can't install more metering > > > offload actions. > > > > > > The call tree (rdma-core-47mlnx1 OFED 4.7-3.2.9): > > > * dr_rule_handle_ste_branch > > > * dr_rule_create_rule_nic > > > * dr_rule_create_rule_fdb > > > * dr_rule_create_rule > > > * mlx5dv_dr_rule_create > > > > > > In the dr_rule_handle_ste_branch, if ste is not used, > > > mlx5dv_dr_rule_create will return rule, if the ste is used, and the > > > ste is the last in the rule, mlx5dv_dr_rule_create will return NULL. > > > > > > dr_rule_handle_ste_branch: > > > if dr_ste_not_used_ste > > > dr_rule_handle_empty_entry > > > else > > > dr_rule_find_ste_in_miss_list > > > dr_ste_is_last_in_rule: if so return NULL and set errno = > > > EINVAL; > > > > > > Fixes: 9ea9b049a960 ("net/mlx5: split meter flow") > > > Cc: Suanming Mou <suanmi...@mellanox.com> > > > Cc: sta...@dpdk.org > > > > > > Signed-off-by: Tonghao Zhang <xiangxia.m....@gmail.com> > > > --- > > > drivers/net/mlx5/mlx5_flow.c | 20 +++++++++++++------- > > > drivers/net/mlx5/mlx5_flow.h | 2 ++ > > > drivers/net/mlx5/mlx5_flow_dv.c | 5 +++++ > > > 3 files changed, 20 insertions(+), 7 deletions(-) > > > > > > diff --git a/drivers/net/mlx5/mlx5_flow.c > > > b/drivers/net/mlx5/mlx5_flow.c index 0087163..f8cdc25 100644 > > > --- a/drivers/net/mlx5/mlx5_flow.c > > > +++ b/drivers/net/mlx5/mlx5_flow.c > > > @@ -3421,7 +3421,9 @@ uint32_t mlx5_flow_adjust_priority(struct > > rte_eth_dev *dev, int32_t priority, > > > const struct rte_flow_attr *attr, > > > const struct rte_flow_item items[], > > > const struct rte_flow_action actions[], > > > - bool external, struct rte_flow_error *error) > > > + bool external, > > > + bool shared, > > > + struct rte_flow_error *error) > > > { > > > struct mlx5_flow *dev_flow; > > > > > > @@ -3434,6 +3436,7 @@ uint32_t mlx5_flow_adjust_priority(struct > > rte_eth_dev *dev, int32_t priority, > > > LIST_INSERT_HEAD(&flow->dev_flows, dev_flow, next); > > > if (sub_flow) > > > *sub_flow = dev_flow; > > > + dev_flow->matcher_shared = shared; > > > return flow_drv_translate(dev, dev_flow, attr, items, actions, > > > error); } > > > > > > @@ -3741,7 +3744,9 @@ uint32_t mlx5_flow_adjust_priority(struct > > rte_eth_dev *dev, int32_t priority, > > > const struct rte_flow_attr *attr, > > > const struct rte_flow_item items[], > > > const struct rte_flow_action actions[], > > > - bool external, struct rte_flow_error *error) > > > + bool external, > > > + bool shared, > > > + struct rte_flow_error *error) > > > { > > > struct mlx5_priv *priv = dev->data->dev_private; > > > struct mlx5_dev_config *config = &priv->config; @@ -3759,7 > > > +3764,8 @@ uint32_t mlx5_flow_adjust_priority(struct rte_eth_dev *dev, > > int32_t priority, > > > config->dv_xmeta_en == MLX5_XMETA_MODE_LEGACY || > > > !mlx5_flow_ext_mreg_supported(dev)) > > > return flow_create_split_inner(dev, flow, NULL, attr, > > > items, > > > - actions, external, error); > > > + actions, external, > > > + shared, error); > > > actions_n = flow_parse_qrss_action(actions, &qrss); > > > if (qrss) { > > > /* Exclude hairpin flows from splitting. */ @@ -3842,7 > > > +3848,7 @@ uint32_t mlx5_flow_adjust_priority(struct rte_eth_dev *dev, > > int32_t priority, > > > /* Add the unmodified original or prefix subflow. */ > > > ret = flow_create_split_inner(dev, flow, &dev_flow, attr, items, > > > ext_actions ? ext_actions : actions, > > > - external, error); > > > + external, shared, error); > > > if (ret < 0) > > > goto exit; > > > assert(dev_flow); > > > @@ -3906,7 +3912,7 @@ uint32_t mlx5_flow_adjust_priority(struct > > rte_eth_dev *dev, int32_t priority, > > > ret = flow_create_split_inner(dev, flow, &dev_flow, > > > &q_attr, mtr_sfx ? items : > > > q_items, q_actions, > > > - external, error); > > > + external, shared, > > > + error); > > > if (ret < 0) > > > goto exit; > > > assert(dev_flow); > > > @@ -3999,7 +4005,7 @@ uint32_t mlx5_flow_adjust_priority(struct > > rte_eth_dev *dev, int32_t priority, > > > } > > > /* Add the prefix subflow. */ > > > ret = flow_create_split_inner(dev, flow, &dev_flow, attr, > > > items, > > > - pre_actions, external, > > > error); > > > + pre_actions, external, > > > + false, error); > > > if (ret) { > > > ret = -rte_errno; > > > goto exit; > > > @@ -4035,7 +4041,7 @@ uint32_t mlx5_flow_adjust_priority(struct > > rte_eth_dev *dev, int32_t priority, > > > ret = flow_create_split_metadata(dev, flow, &sfx_attr, > > > sfx_items ? sfx_items : items, > > > sfx_actions ? sfx_actions : > > > actions, > > > - external, error); > > > + external, sfx_items == NULL, > > > + error); > > > exit: > > > if (sfx_actions) > > > rte_free(sfx_actions); diff --git > > > a/drivers/net/mlx5/mlx5_flow.h b/drivers/net/mlx5/mlx5_flow.h index > > > 3fff5dd..84636be 100644 > > > --- a/drivers/net/mlx5/mlx5_flow.h > > > +++ b/drivers/net/mlx5/mlx5_flow.h > > > @@ -338,6 +338,7 @@ struct mlx5_flow_dv_matcher { > > > /**< Pointer to the table(group) the matcher associated with. */ > > > rte_atomic32_t refcnt; /**< Reference counter. */ > > > void *matcher_object; /**< Pointer to DV matcher */ > > > + bool shared; > > > uint16_t crc; /**< CRC of key. */ > > > uint16_t priority; /**< Priority of matcher. */ > > > struct mlx5_flow_dv_match_params mask; /**< Matcher mask. */ > > > @@ -532,6 +533,7 @@ struct mlx5_flow { > > > uint32_t mtr_flow_id; /**< Unique meter match flow id. */ > > > }; > > > bool external; /**< true if the flow is created external to > > > PMD. */ > > > + bool matcher_shared; > > > }; > > > > > > /* Flow meter state. */ > > > diff --git a/drivers/net/mlx5/mlx5_flow_dv.c > > > b/drivers/net/mlx5/mlx5_flow_dv.c index 7528556..362c36c 100644 > > > --- a/drivers/net/mlx5/mlx5_flow_dv.c > > > +++ b/drivers/net/mlx5/mlx5_flow_dv.c > > > @@ -6324,10 +6324,13 @@ struct field_modify_info modify_tcp[] = { > > > if (!tbl) > > > return -rte_errno; /* No need to refill the error > > > info */ > > > tbl_data = container_of(tbl, struct mlx5_flow_tbl_data_entry, > > > tbl); > > > + if (!dev_flow->matcher_shared) > > > + goto create_matcher; > > > /* Lookup from cache. */ > > > LIST_FOREACH(cache_matcher, &tbl_data->matchers, next) { > > > if (matcher->crc == cache_matcher->crc && > > > matcher->priority == cache_matcher->priority && > > > + cache_matcher->shared && > > > !memcmp((const void *)matcher->mask.buf, > > > (const void *)cache_matcher->mask.buf, > > > cache_matcher->mask.size)) { @@ -6346,6 > > > +6349,7 @@ struct field_modify_info modify_tcp[] = { > > > return 0; > > > } > > > } > > > +create_matcher: > > > /* Register new matcher. */ > > > cache_matcher = rte_calloc(__func__, 1, sizeof(*cache_matcher), > > > 0); > > > if (!cache_matcher) { > > > @@ -6355,6 +6359,7 @@ struct field_modify_info modify_tcp[] = { > > > "cannot allocate matcher > > > memory"); > > > } > > > *cache_matcher = *matcher; > > > + cache_matcher->shared = dev_flow->matcher_shared; > > > dv_attr.match_criteria_enable = > > > flow_dv_matcher_enable(cache_matcher->mask.buf); > > > dv_attr.priority = matcher->priority; > > > -- > > > 1.8.3.1 > > >