From: Kalesh AP <kalesh-anakkur.pura...@broadcom.com>

There is no condition check for the user requested operation
for VLAN filtering. As a result, VLAN filtering is getting disabled
when the user enables/disables VLAN stripping on same port.

The function bnxt_hwrm_clear_l2_filter() didn't actually free
L2 filter in HW if the reference count of filter is zero.

Fixed it by incrementing the reference count of filter in
bnxt_alloc_filter() routine.

Because of the recent changes in bnxt_hwrm_clear_l2_filter(),
change was needed in the routine bnxt_set_default_mac_addr_op()
to destroy and re-create the default filter when the user
changes the default MAC of the port.

Fixes: 45eb28dd992b ("net/bnxt: fix to keep the L2 filter intact so it can be 
reused")
Fixes: 6118503d8071 ("net/bnxt: fix VLAN filtering")

Signed-off-by: Kalesh AP <kalesh-anakkur.pura...@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.ko...@broadcom.com>
Reviewed-by: Ajit Kumar Khaparde <ajit.khapa...@broadcom.com>
---
 drivers/net/bnxt/bnxt_ethdev.c | 66 +++++++++++++++++++++++-------------------
 drivers/net/bnxt/bnxt_filter.c |  5 ++--
 2 files changed, 39 insertions(+), 32 deletions(-)

diff --git a/drivers/net/bnxt/bnxt_ethdev.c b/drivers/net/bnxt/bnxt_ethdev.c
index a948c78..83f475d 100644
--- a/drivers/net/bnxt/bnxt_ethdev.c
+++ b/drivers/net/bnxt/bnxt_ethdev.c
@@ -1860,18 +1860,12 @@ static int bnxt_del_dflt_mac_filter(struct bnxt *bp,
 }
 
 static int
-bnxt_vlan_offload_set_op(struct rte_eth_dev *dev, int mask)
+bnxt_config_vlan_hw_filter(struct bnxt *bp, uint64_t rx_offloads)
 {
-       struct bnxt *bp = dev->data->dev_private;
-       uint64_t rx_offloads = dev->data->dev_conf.rxmode.offloads;
        struct bnxt_vnic_info *vnic;
        unsigned int i;
        int rc;
 
-       rc = is_bnxt_in_error(bp);
-       if (rc)
-               return rc;
-
        vnic = BNXT_GET_DEFAULT_VNIC(bp);
        if (!(rx_offloads & DEV_RX_OFFLOAD_VLAN_FILTER)) {
                /* Remove any VLAN filters programmed */
@@ -1895,6 +1889,28 @@ bnxt_vlan_offload_set_op(struct rte_eth_dev *dev, int 
mask)
        PMD_DRV_LOG(DEBUG, "VLAN Filtering: %d\n",
                    !!(rx_offloads & DEV_RX_OFFLOAD_VLAN_FILTER));
 
+       return 0;
+}
+
+static int
+bnxt_vlan_offload_set_op(struct rte_eth_dev *dev, int mask)
+{
+       uint64_t rx_offloads = dev->data->dev_conf.rxmode.offloads;
+       struct bnxt *bp = dev->data->dev_private;
+       unsigned int i;
+       int rc;
+
+       rc = is_bnxt_in_error(bp);
+       if (rc)
+               return rc;
+
+       if (mask & ETH_VLAN_FILTER_MASK) {
+               /* Enable or disable VLAN filtering */
+               rc = bnxt_config_vlan_hw_filter(bp, rx_offloads);
+               if (rc)
+                       return rc;
+       }
+
        if (mask & ETH_VLAN_STRIP_MASK) {
                /* Enable or disable VLAN stripping */
                for (i = 0; i < bp->nr_vnics; i++) {
@@ -1984,7 +2000,6 @@ bnxt_set_default_mac_addr_op(struct rte_eth_dev *dev,
        struct bnxt *bp = dev->data->dev_private;
        /* Default Filter is tied to VNIC 0 */
        struct bnxt_vnic_info *vnic = BNXT_GET_DEFAULT_VNIC(bp);
-       struct bnxt_filter_info *filter;
        int rc;
 
        rc = is_bnxt_in_error(bp);
@@ -1997,32 +2012,23 @@ bnxt_set_default_mac_addr_op(struct rte_eth_dev *dev,
        if (rte_is_zero_ether_addr(addr))
                return -EINVAL;
 
-       STAILQ_FOREACH(filter, &vnic->filter, next) {
-               /* Default Filter is at Index 0 */
-               if (filter->mac_index != 0)
-                       continue;
-
-               memcpy(filter->l2_addr, addr, RTE_ETHER_ADDR_LEN);
-               memset(filter->l2_addr_mask, 0xff, RTE_ETHER_ADDR_LEN);
-               filter->flags |= HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX |
-                       HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_OUTERMOST;
-               filter->enables |=
-                       HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR |
-                       HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR_MASK;
+       /* Check if the requested MAC is already added */
+       if (memcmp(addr, bp->mac_addr, RTE_ETHER_ADDR_LEN) == 0)
+               return 0;
 
-               rc = bnxt_hwrm_set_l2_filter(bp, vnic->fw_vnic_id, filter);
-               if (rc) {
-                       memcpy(filter->l2_addr, bp->mac_addr,
-                              RTE_ETHER_ADDR_LEN);
-                       return rc;
-               }
+       /* Destroy filter and re-create it */
+       bnxt_del_dflt_mac_filter(bp, vnic);
 
-               memcpy(bp->mac_addr, addr, RTE_ETHER_ADDR_LEN);
-               PMD_DRV_LOG(DEBUG, "Set MAC addr\n");
-               return 0;
+       memcpy(bp->mac_addr, addr, RTE_ETHER_ADDR_LEN);
+       if (dev->data->dev_conf.rxmode.offloads & DEV_RX_OFFLOAD_VLAN_FILTER) {
+               /* This filter will allow only untagged packets */
+               rc = bnxt_add_vlan_filter(bp, 0);
+       } else {
+               rc = bnxt_add_mac_filter(bp, vnic, addr, 0, 0);
        }
 
-       return 0;
+       PMD_DRV_LOG(DEBUG, "Set MAC addr\n");
+       return rc;
 }
 
 static int
diff --git a/drivers/net/bnxt/bnxt_filter.c b/drivers/net/bnxt/bnxt_filter.c
index 0c410f8..b31f104 100644
--- a/drivers/net/bnxt/bnxt_filter.c
+++ b/drivers/net/bnxt/bnxt_filter.c
@@ -39,9 +39,10 @@ struct bnxt_filter_info *bnxt_alloc_filter(struct bnxt *bp)
        filter->flags = HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX;
        filter->enables = HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR |
                        HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR_MASK;
-       memcpy(filter->l2_addr, bp->eth_dev->data->mac_addrs->addr_bytes,
-              RTE_ETHER_ADDR_LEN);
+       memcpy(filter->l2_addr, bp->mac_addr, RTE_ETHER_ADDR_LEN);
        memset(filter->l2_addr_mask, 0xff, RTE_ETHER_ADDR_LEN);
+       /* bump up the reference count of filter */
+       filter->l2_ref_cnt++;
        return filter;
 }
 
-- 
2.10.1

Reply via email to