Hi Praveen, I've few minor comments. Please see inline.
Thanks, Anoob > -----Original Message----- > From: Praveen Shetty <praveen.she...@intel.com> > Sent: Tuesday, March 31, 2020 6:32 PM > To: dev@dpdk.org; declan.dohe...@intel.com; Anoob Joseph > <ano...@marvell.com> > Cc: bernard.iremon...@intel.com; konstantin.anan...@intel.com > Subject: [EXT] [PATCH v3] examples/ipsec-secgw: support flow director feature > > External Email > > ---------------------------------------------------------------------- > Support load distribution in security gateway application using NIC load > distribution feature(Flow Director). > Flow Director is used to redirect the specified inbound ipsec flow to a > specified > queue.This is achieved by extending the SA rule syntax to support > specification > by adding new action_type of <flow-direction> to a specified <port_id> > <queue_id>. > > Signed-off-by: Praveen Shetty <praveen.she...@intel.com> > --- > v3 changes: > Incorporated Anoob review comments on v2. > > examples/ipsec-secgw/ep0.cfg | 11 +++++ > examples/ipsec-secgw/ipsec-secgw.c | 55 +++++++++++++++++++++++ > examples/ipsec-secgw/ipsec.c | 67 +++++++++++++++++++++++++++ > examples/ipsec-secgw/ipsec.h | 9 ++++ > examples/ipsec-secgw/sa.c | 72 ++++++++++++++++++++++++++++-- > 5 files changed, 211 insertions(+), 3 deletions(-) > > diff --git a/examples/ipsec-secgw/ep0.cfg b/examples/ipsec-secgw/ep0.cfg > index dfd4aca7d..6f8d5aa53 100644 > --- a/examples/ipsec-secgw/ep0.cfg > +++ b/examples/ipsec-secgw/ep0.cfg > @@ -29,6 +29,7 @@ sp ipv4 in esp protect 111 pri 1 dst 192.168.186.0/24 sport > 0:65535 dport 0:6553 sp ipv4 in esp protect 115 pri 1 dst 192.168.210.0/24 > sport > 0:65535 dport 0:65535 sp ipv4 in esp protect 116 pri 1 dst 192.168.211.0/24 > sport 0:65535 dport 0:65535 sp ipv4 in esp protect 115 pri 1 dst > 192.168.210.0/24 sport 0:65535 dport 0:65535 > +sp ipv4 in esp protect 117 pri 1 dst 192.168.212.0/24 sport 0:65535 > +dport 0:65535 > sp ipv4 in esp protect 125 pri 1 dst 192.168.65.0/24 sport 0:65535 dport > 0:65535 > sp ipv4 in esp protect 125 pri 1 dst 192.168.65.0/24 sport 0:65535 dport > 0:65535 > sp ipv4 in esp protect 126 pri 1 dst 192.168.66.0/24 sport 0:65535 dport > 0:65535 > @@ -61,6 +62,8 @@ sp ipv6 in esp protect 125 pri 1 dst > ffff:0000:0000:0000:aaaa:aaaa:0000:0000/96 > sport 0:65535 dport 0:65535 > sp ipv6 in esp protect 126 pri 1 dst > ffff:0000:0000:0000:bbbb:bbbb:0000:0000/96 \ sport 0:65535 dport 0:65535 > +sp ipv6 in esp protect 127 pri 1 dst > +ffff:0000:0000:0000:cccc:dddd:0000:0000/96 \ sport 0:65535 dport > +0:65535 > > #SA rules > sa out 5 cipher_algo aes-128-cbc cipher_key 0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0 \ > @@ -118,6 +121,9 @@ dst 172.16.1.5 > > sa in 116 cipher_algo null auth_algo null mode ipv4-tunnel src 172.16.2.6 dst > 172.16.1.6 > > +sa in 117 cipher_algo null auth_algo null mode ipv4-tunnel src > +172.16.2.7 \ dst 172.16.1.7 flow-direction 0 2 > + > sa in 125 cipher_algo aes-128-cbc cipher_key > c3:c3:c3:c3:c3:c3:c3:c3:c3:c3:c3:\ > c3:c3:c3:c3:c3 auth_algo sha1-hmac auth_key > c3:c3:c3:c3:c3:c3:c3:c3:c3:c3:c3:\ > c3:c3:c3:c3:c3:c3:c3:c3:c3 mode ipv6-tunnel \ @@ -130,6 +136,11 @@ sa in > 126 cipher_algo aes-128-cbc cipher_key 4d:4d:4d:4d:4d:4d:4d:4d:4d:4d:4d:\ > src 2222:2222:2222:2222:2222:2222:2222:6666 \ dst > 1111:1111:1111:1111:1111:1111:1111:6666 > > +sa in 127 cipher_algo null auth_algo null mode ipv6-tunnel \ src > +2222:2222:2222:2222:2222:2222:2222:7777 \ dst > +1111:1111:1111:1111:1111:1111:1111:7777 \ flow-direction 0 3 > + > #Routing rules > rt ipv4 dst 172.16.2.5/32 port 0 > rt ipv4 dst 172.16.2.6/32 port 1 > diff --git a/examples/ipsec-secgw/ipsec-secgw.c b/examples/ipsec- > secgw/ipsec-secgw.c > index ce36e6d9c..4400b075c 100644 > --- a/examples/ipsec-secgw/ipsec-secgw.c > +++ b/examples/ipsec-secgw/ipsec-secgw.c > @@ -246,6 +246,30 @@ static struct rte_eth_conf port_conf = { > .txmode = { > .mq_mode = ETH_MQ_TX_NONE, > }, > + .fdir_conf = { > + .mode = RTE_FDIR_MODE_NONE, > + .pballoc = RTE_FDIR_PBALLOC_64K, > + .status = RTE_FDIR_REPORT_STATUS, > + .mask = { > + .vlan_tci_mask = 0xFFEF, > + .ipv4_mask = { > + .src_ip = 0xFFFFFFFF, > + .dst_ip = 0xFFFFFFFF, > + }, > + .ipv6_mask = { > + .src_ip = {0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, > + 0xFFFFFFFF}, > + .dst_ip = {0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, > + 0xFFFFFFFF}, > + }, > + .src_port_mask = 0xFFFF, > + .dst_port_mask = 0xFFFF, > + .mac_addr_byte_mask = 0xFF, > + .tunnel_type_mask = 1, > + .tunnel_id_mask = 0xFFFFFFFF, > + }, > + .drop_queue = 127, > + } > }; > > struct socket_ctx socket_ctx[NB_SOCKETS]; @@ -1183,6 +1207,28 @@ > ipsec_poll_mode_worker(void) > } > } > > +int > +check_flow_params(uint16_t fdir_portid, uint8_t fdir_qid) { > + uint16_t i; > + uint16_t portid; > + uint8_t queueid; > + > + for (i = 0; i < nb_lcore_params; ++i) { > + portid = lcore_params_array[i].port_id; > + if (portid == fdir_portid) { > + queueid = lcore_params_array[i].queue_id; > + if (queueid == fdir_qid) > + break; > + } > + > + if (i == nb_lcore_params - 1) > + return -1; > + } > + > + return 1; > +} > + > static int32_t > check_poll_mode_params(struct eh_conf *eh_conf) { @@ -2813,6 +2859,15 > @@ main(int32_t argc, char **argv) > > sa_check_offloads(portid, &req_rx_offloads[portid], > &req_tx_offloads[portid]); > + /* check if FDIR is configured on the port */ > + if (check_fdir_configured(portid)) { > + /* Enable FDIR */ > + port_conf.fdir_conf.mode = > RTE_FDIR_MODE_PERFECT; > + /* Disable RSS */ > + port_conf.rxmode.mq_mode = ETH_MQ_RX_NONE; > + port_conf.rx_adv_conf.rss_conf.rss_hf = 0; > + port_conf.rx_adv_conf.rss_conf.rss_key = NULL; > + } > port_init(portid, req_rx_offloads[portid], > req_tx_offloads[portid]); > } > diff --git a/examples/ipsec-secgw/ipsec.c b/examples/ipsec-secgw/ipsec.c index > d40657102..76ee9dbcf 100644 > --- a/examples/ipsec-secgw/ipsec.c > +++ b/examples/ipsec-secgw/ipsec.c > @@ -418,6 +418,73 @@ create_inline_session(struct socket_ctx *skt_ctx, > struct ipsec_sa *sa, > return 0; > } > > +int > +create_ipsec_esp_flow(struct ipsec_sa *sa) { > + int ret = 0; > + struct rte_flow_error err; > + if (sa->direction == RTE_SECURITY_IPSEC_SA_DIR_EGRESS) > + return 0; /* No Flow director rules for Egress traffic */ [Anoob] Any reason why this is not relevant for Egress. As for the code I would suggest something like, /* No flow director rules for Egress traffic */ if (sa->direction == RTE_SECURITY_IPSEC_SA_DIR_EGRESS) return 0; ... > + if (sa->flags == TRANSPORT) { > + RTE_LOG(ERR, IPSEC, > + "No Flow director rule for transport mode:"); [Anoob] Is the ending : required in the line above? And do might need a \n? Also, why is one case returning 0 (EGRESS) and another (TRANSPORT) is returning -1? One is treated as error and other is not? > + return -1; > + } > + sa->action[0].type = RTE_FLOW_ACTION_TYPE_QUEUE; > + sa->pattern[0].type = RTE_FLOW_ITEM_TYPE_ETH; > + sa->action[0].conf = > + &(struct rte_flow_action_queue){ > + .index = sa->fdir_qid, > + }; > + sa->attr.egress = 0; > + sa->attr.ingress = 1; > + if (IS_IP6(sa->flags)) { > + sa->pattern[1].mask = &rte_flow_item_ipv6_mask; > + sa->pattern[1].type = RTE_FLOW_ITEM_TYPE_IPV6; > + sa->pattern[1].spec = &sa->ipv6_spec; > + memcpy(sa->ipv6_spec.hdr.dst_addr, > + sa->dst.ip.ip6.ip6_b, sizeof(sa->dst.ip.ip6.ip6_b)); > + memcpy(sa->ipv6_spec.hdr.src_addr, > + sa->src.ip.ip6.ip6_b, sizeof(sa->src.ip.ip6.ip6_b)); > + sa->pattern[2].type = RTE_FLOW_ITEM_TYPE_ESP; > + sa->pattern[2].spec = &sa->esp_spec; > + sa->pattern[2].mask = &rte_flow_item_esp_mask; > + sa->esp_spec.hdr.spi = rte_cpu_to_be_32(sa->spi); > + sa->pattern[3].type = RTE_FLOW_ITEM_TYPE_END; > + } else if (IS_IP4(sa->flags)) { > + sa->pattern[1].mask = &rte_flow_item_ipv4_mask; > + sa->pattern[1].type = RTE_FLOW_ITEM_TYPE_IPV4; > + sa->pattern[1].spec = &sa->ipv4_spec; > + sa->ipv4_spec.hdr.dst_addr = sa->dst.ip.ip4; > + sa->ipv4_spec.hdr.src_addr = sa->src.ip.ip4; > + sa->pattern[2].type = RTE_FLOW_ITEM_TYPE_ESP; > + sa->pattern[2].spec = &sa->esp_spec; > + sa->pattern[2].mask = &rte_flow_item_esp_mask; > + sa->esp_spec.hdr.spi = rte_cpu_to_be_32(sa->spi); > + sa->pattern[3].type = RTE_FLOW_ITEM_TYPE_END; > + } > + sa->action[1].type = RTE_FLOW_ACTION_TYPE_END; > + > + ret = rte_flow_validate(sa->portid, &sa->attr, > + sa->pattern, sa->action, > + &err); > + if (ret < 0) { > + RTE_LOG(ERR, IPSEC, > + "Flow Validation failed\n"); [Anoob] The above should fit into one line. Also V should be small. > + return ret; > + } > + sa->flow = rte_flow_create(sa->portid, > + &sa->attr, sa->pattern, sa->action, > + &err); [Anoob] Start breaking into multiple lines when you exceed 80 char limits. In the earlier line, &sa->attr should fit into the line above. Also, having a blank line above rte_flow_create() line would be good. > + if (!sa->flow) { > + RTE_LOG(ERR, IPSEC, > + "Flow Creation failed\n"); [Anoob] Above should fit into one line. Also C should be small. > + return -1; > + } > + > + return 0; > +} > + > /* > * queue crypto-ops into PMD queue. > */ > diff --git a/examples/ipsec-secgw/ipsec.h b/examples/ipsec-secgw/ipsec.h > index f8f29f9b1..b0e9f45cb 100644 > --- a/examples/ipsec-secgw/ipsec.h > +++ b/examples/ipsec-secgw/ipsec.h > @@ -144,6 +144,8 @@ struct ipsec_sa { > }; > enum rte_security_ipsec_sa_direction direction; > uint16_t portid; > + uint8_t fdir_qid; > + uint8_t fdir_flag; > > #define MAX_RTE_FLOW_PATTERN (4) > #define MAX_RTE_FLOW_ACTIONS (3) > @@ -408,5 +410,12 @@ create_lookaside_session(struct ipsec_ctx *ipsec_ctx, > struct ipsec_sa *sa, int create_inline_session(struct socket_ctx *skt_ctx, > struct > ipsec_sa *sa, > struct rte_ipsec_session *ips); > +int > +check_flow_params(uint16_t fdir_portid, uint8_t fdir_qid); > + > +int > +create_ipsec_esp_flow(struct ipsec_sa *sa); > > +int > +check_fdir_configured(uint16_t portid); > #endif /* __IPSEC_H__ */ > diff --git a/examples/ipsec-secgw/sa.c b/examples/ipsec-secgw/sa.c index > 0eb52d141..ddd275142 100644 > --- a/examples/ipsec-secgw/sa.c > +++ b/examples/ipsec-secgw/sa.c > @@ -271,6 +271,7 @@ parse_sa_tokens(char **tokens, uint32_t n_tokens, > uint32_t type_p = 0; > uint32_t portid_p = 0; > uint32_t fallback_p = 0; > + int16_t status_p = 0; > > if (strcmp(tokens[0], "in") == 0) { > ri = &nb_sa_in; > @@ -295,6 +296,7 @@ parse_sa_tokens(char **tokens, uint32_t n_tokens, > if (atoi(tokens[1]) == INVALID_SPI) > return; > rule->spi = atoi(tokens[1]); > + rule->portid = UINT16_MAX; > ips = ipsec_get_primary_session(rule); > > for (ti = 2; ti < n_tokens; ti++) { > @@ -636,9 +638,14 @@ parse_sa_tokens(char **tokens, uint32_t n_tokens, > INCREMENT_TOKEN_INDEX(ti, n_tokens, status); > if (status->status < 0) > return; > - rule->portid = atoi(tokens[ti]); > - if (status->status < 0) > + if (rule->portid == UINT16_MAX) > + rule->portid = atoi(tokens[ti]); > + else if (rule->portid != atoi(tokens[ti])) { > + APP_CHECK(0, status, "portid %s " > + "not matching with already assigned portid > %u", > + tokens[ti], rule->portid); > return; [Anoob] Alignment for APP_CHECK's broken up parts are not following the convention. > + } > portid_p = 1; > continue; > } > @@ -681,6 +688,43 @@ parse_sa_tokens(char **tokens, uint32_t n_tokens, > fallback_p = 1; > continue; > } > + if (strcmp(tokens[ti], "flow-direction") == 0) { > + if (ips->type == > + > RTE_SECURITY_ACTION_TYPE_INLINE_PROTOCOL || > + ips->type == > + > RTE_SECURITY_ACTION_TYPE_LOOKASIDE_PROTOCOL || > + ips->type == > + > RTE_SECURITY_ACTION_TYPE_INLINE_CRYPTO) { > + APP_CHECK(0, status, "Flow Director not " > + "supported for security session " > + "type:%d", ips->type); > + return; > + } > + rule->fdir_flag = 1; > + INCREMENT_TOKEN_INDEX(ti, n_tokens, status); > + if (status->status < 0) > + return; > + if (rule->portid == UINT16_MAX) > + rule->portid = atoi(tokens[ti]); > + else if (rule->portid != atoi(tokens[ti])) { > + APP_CHECK(0, status, "portid %s " > + "not matching with already assigned portid > %u", > + tokens[ti], rule->portid); > + return; > + } > + INCREMENT_TOKEN_INDEX(ti, n_tokens, status); > + if (status->status < 0) > + return; > + rule->fdir_qid = atoi(tokens[ti]); > + /* validating portid and queueid */ > + status_p = check_flow_params(rule->portid, > + rule->fdir_qid); > + if (status_p < 0) { > + printf("port id %u / queue id %u is not > valid\n", > + rule->portid, rule->fdir_qid); > + } > + continue; > + } > > /* unrecognizeable input */ > APP_CHECK(0, status, "unrecognized input \"%s\"", @@ -719,7 > +763,6 @@ parse_sa_tokens(char **tokens, uint32_t n_tokens, > if (!type_p || (!portid_p && ips->type != > RTE_SECURITY_ACTION_TYPE_CPU_CRYPTO)) { > ips->type = RTE_SECURITY_ACTION_TYPE_NONE; > - rule->portid = -1; > } > > *ri = *ri + 1; > @@ -823,6 +866,9 @@ print_one_sa_rule(const struct ipsec_sa *sa, int > inbound) > break; > } > } > + if (sa->fdir_flag == 1) > + printf("flow-direction %d %d", sa->portid, sa->fdir_qid); > + > printf("\n"); > } > > @@ -1141,6 +1187,12 @@ sa_add_rules(struct sa_ctx *sa_ctx, const struct > ipsec_sa entries[], > } > } > > + if (sa->fdir_flag && inbound) { > + rc = create_ipsec_esp_flow(sa); > + if (rc != 0) > + RTE_LOG(ERR, IPSEC_ESP, > + "create_ipsec_esp flow failed\n"); [Anoob] Instead of function name, can you give the description of what actually failed? > + } > print_one_sa_rule(sa, inbound); > } > > @@ -1243,6 +1295,20 @@ fill_ipsec_session(struct rte_ipsec_session *ss, struct > rte_ipsec_sa *sa) > return rc; > } > > +int > +check_fdir_configured(uint16_t portid) > +{ > + struct ipsec_sa *sa = NULL; > + uint32_t idx_sa = 0; > + > + for (idx_sa = 0; idx_sa < nb_sa_in; idx_sa++) { > + sa = &sa_in[idx_sa]; > + if (sa->portid == portid) > + return sa->fdir_flag; > + } > + return 0; > +} > + > /* > * Initialise related rte_ipsec_sa object. > */ > -- > 2.17.1