As decided in the Technical Board in November 2019,
the kernel module igb_uio is moved to the dpdk-kmods repository
in the /linux/igb_uio/ directory.

Minutes of Technical Board meeting:
https://mails.dpdk.org/archives/dev/2019-November/151763.html

Signed-off-by: Thomas Monjalon <tho...@monjalon.net>
---
v2: update few docs (including release notes)
---
 MAINTAINERS                            |   1 -
 doc/guides/linux_gsg/enable_func.rst   |   5 +-
 doc/guides/linux_gsg/linux_drivers.rst |  21 +-
 doc/guides/rel_notes/deprecation.rst   |   7 -
 doc/guides/rel_notes/release_20_11.rst |   3 +
 kernel/linux/igb_uio/Kbuild            |   2 -
 kernel/linux/igb_uio/compat.h          | 154 ------
 kernel/linux/igb_uio/igb_uio.c         | 660 -------------------------
 kernel/linux/igb_uio/meson.build       |  20 -
 kernel/linux/meson.build               |   2 +-
 10 files changed, 12 insertions(+), 863 deletions(-)
 delete mode 100644 kernel/linux/igb_uio/Kbuild
 delete mode 100644 kernel/linux/igb_uio/compat.h
 delete mode 100644 kernel/linux/igb_uio/igb_uio.c
 delete mode 100644 kernel/linux/igb_uio/meson.build

diff --git a/MAINTAINERS b/MAINTAINERS
index 3b16d7a4b8..d74bec58e1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -292,7 +292,6 @@ F: doc/guides/linux_gsg/
 
 Linux UIO
 M: Ferruh Yigit <ferruh.yi...@intel.com>
-F: kernel/linux/igb_uio/
 F: drivers/bus/pci/linux/*uio*
 
 Linux VFIO
diff --git a/doc/guides/linux_gsg/enable_func.rst 
b/doc/guides/linux_gsg/enable_func.rst
index b2bda80bb7..a6c5a980fd 100644
--- a/doc/guides/linux_gsg/enable_func.rst
+++ b/doc/guides/linux_gsg/enable_func.rst
@@ -129,7 +129,7 @@ Loading the DPDK KNI Kernel Module
 
 To run the DPDK Kernel NIC Interface (KNI) sample application, an extra kernel 
module (the kni module) must be loaded into the running kernel.
 The module is found in the kmod sub-directory of the DPDK target directory.
-Similar to the loading of the ``igb_uio`` module, this module should be loaded 
using the insmod command as shown below
+This module should be loaded using the insmod command as shown below
 (assuming that the current directory is the DPDK target directory):
 
 .. code-block:: console
@@ -156,4 +156,5 @@ This results in pass-through of the DMAR (DMA Remapping) 
lookup in the host.
 Also, if ``INTEL_IOMMU_DEFAULT_ON`` is not set in the kernel, the 
``intel_iommu=on`` kernel parameter must be used too.
 This ensures that the Intel IOMMU is being initialized as expected.
 
-Please note that while using ``iommu=pt`` is compulsory for ``igb_uio 
driver``, the ``vfio-pci`` driver can actually work with both ``iommu=pt`` and 
``iommu=on``.
+Please note that while using ``iommu=pt`` is compulsory for ``igb_uio`` driver,
+the ``vfio-pci`` driver can actually work with both ``iommu=pt`` and 
``iommu=on``.
diff --git a/doc/guides/linux_gsg/linux_drivers.rst 
b/doc/guides/linux_gsg/linux_drivers.rst
index 185074013a..0024b23050 100644
--- a/doc/guides/linux_gsg/linux_drivers.rst
+++ b/doc/guides/linux_gsg/linux_drivers.rst
@@ -27,31 +27,20 @@ can provide the uio capability. This module can be loaded 
using the command:
 
     ``uio_pci_generic`` module doesn't support the creation of virtual 
functions.
 
-As an alternative to the ``uio_pci_generic``, the DPDK also includes the 
igb_uio
-module which can be found in the kmod subdirectory referred to above. It can
-be loaded as shown below:
+As an alternative to the ``uio_pci_generic``, there is the ``igb_uio`` module
+which can be found in the repository ``dpdk-kmods``.
+It can be loaded as shown below:
 
 .. code-block:: console
 
     sudo modprobe uio
-    sudo insmod kmod/igb_uio.ko
-
-.. note::
-
-   ``igb_uio`` module is disabled by default starting from ``DPDK v20.02``.
-   To build it, the config option ``CONFIG_RTE_EAL_IGB_UIO`` should be enabled.
-   It is planned to move ``igb_uio`` module to a different git repository.
-
-.. note::
-
-    For some devices which lack support for legacy interrupts, e.g. virtual 
function
-    (VF) devices, the ``igb_uio`` module may be needed in place of 
``uio_pci_generic``.
+    sudo insmod igb_uio.ko
 
 .. note::
 
    If UEFI secure boot is enabled, the Linux kernel may disallow the use of
    UIO on the system. Therefore, devices for use by DPDK should be bound to the
-   ``vfio-pci`` kernel module rather than ``igb_uio`` or ``uio_pci_generic``.
+   ``vfio-pci`` kernel module rather than any UIO-based module.
    For more details see :ref:`linux_gsg_binding_kernel` below.
 
 .. note::
diff --git a/doc/guides/rel_notes/deprecation.rst 
b/doc/guides/rel_notes/deprecation.rst
index 88d7d07613..64d1c7fdff 100644
--- a/doc/guides/rel_notes/deprecation.rst
+++ b/doc/guides/rel_notes/deprecation.rst
@@ -96,13 +96,6 @@ Deprecation Notices
   used in the place of rte_cio_*mb APIs. The rte_cio_*mb APIs will be
   deprecated in 20.11 release.
 
-* igb_uio: In the view of reducing the kernel dependency from the main tree,
-  as a first step, the Technical Board decided to move ``igb_uio``
-  kernel module to the dpdk-kmods repository in the /linux/igb_uio/ directory
-  in 20.11.
-  Minutes of Technical Board Meeting of `2019-11-06
-  <https://mails.dpdk.org/archives/dev/2019-November/151763.html>`_.
-
 * lib: will fix extending some enum/define breaking the ABI. There are multiple
   samples in DPDK that enum/define terminated with a ``.*MAX.*`` value which is
   used by iterators, and arrays holding these values are sized with this
diff --git a/doc/guides/rel_notes/release_20_11.rst 
b/doc/guides/rel_notes/release_20_11.rst
index 667e3d54ad..ba4e237d1f 100644
--- a/doc/guides/rel_notes/release_20_11.rst
+++ b/doc/guides/rel_notes/release_20_11.rst
@@ -68,6 +68,9 @@ Removed Items
    Also, make sure to start the actual text at the margin.
    =======================================================
 
+kernel: The module ``igb_uio`` has been moved to the git repository
+``dpdk-kmods`` in a new directory ``linux/igb_uio``.
+
 
 API Changes
 -----------
diff --git a/kernel/linux/igb_uio/Kbuild b/kernel/linux/igb_uio/Kbuild
deleted file mode 100644
index 3ab85c4116..0000000000
diff --git a/kernel/linux/igb_uio/compat.h b/kernel/linux/igb_uio/compat.h
deleted file mode 100644
index 8dbb896ae1..0000000000
diff --git a/kernel/linux/igb_uio/igb_uio.c b/kernel/linux/igb_uio/igb_uio.c
deleted file mode 100644
index 039f5a5f63..0000000000
diff --git a/kernel/linux/igb_uio/meson.build b/kernel/linux/igb_uio/meson.build
deleted file mode 100644
index 80540aecee..0000000000
diff --git a/kernel/linux/meson.build b/kernel/linux/meson.build
index da79df1687..5c864a4653 100644
--- a/kernel/linux/meson.build
+++ b/kernel/linux/meson.build
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright(c) 2018 Intel Corporation
 
-subdirs = ['igb_uio', 'kni']
+subdirs = ['kni']
 
 # if we are cross-compiling we need kernel_dir specified
 if get_option('kernel_dir') == '' and meson.is_cross_build()
-- 
2.28.0

Reply via email to