Implement VLAN stripping in software. This allows application
to be device independent.
Signed-off-by: Stephen Hemminger <stephen at networkplumber.org>
Signed-off-by: Changchun Ouyang <changchun.ouyang at intel.com>
---
lib/librte_ether/rte_ethdev.h | 3 +++
lib/librte_pmd_virtio/virtio_ethdev.c | 2 ++
lib/librte_pmd_virtio/virtio_pci.h | 1 +
lib/librte_pmd_virtio/virtio_rxtx.c | 20 ++++++++++++++++++--
4 files changed, 24 insertions(+), 2 deletions(-)
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index 1200c1c..94d6b2b 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -643,6 +643,9 @@ struct rte_eth_rxconf {
#define ETH_TXQ_FLAGS_NOOFFLOADS \
(ETH_TXQ_FLAGS_NOVLANOFFL | ETH_TXQ_FLAGS_NOXSUMSCTP | \
ETH_TXQ_FLAGS_NOXSUMUDP | ETH_TXQ_FLAGS_NOXSUMTCP)
+#define ETH_TXQ_FLAGS_NOXSUMS \
+ (ETH_TXQ_FLAGS_NOXSUMSCTP | ETH_TXQ_FLAGS_NOXSUMUDP | \
+ ETH_TXQ_FLAGS_NOXSUMTCP)
/**
* A structure used to configure a TX ring of an Ethernet port.
*/
diff --git a/lib/librte_pmd_virtio/virtio_ethdev.c
b/lib/librte_pmd_virtio/virtio_ethdev.c
index ef87ff8..da74659 100644
--- a/lib/librte_pmd_virtio/virtio_ethdev.c
+++ b/lib/librte_pmd_virtio/virtio_ethdev.c
@@ -1064,6 +1064,8 @@ virtio_dev_configure(struct rte_eth_dev *dev)
return (-EINVAL);
}
+ hw->vlan_strip = rxmode->hw_vlan_strip;
+
ret = vtpci_irq_config(hw, 0);
if (ret != 0)
PMD_DRV_LOG(ERR, "failed to set config vector");
diff --git a/lib/librte_pmd_virtio/virtio_pci.h
b/lib/librte_pmd_virtio/virtio_pci.h
index 6998737..6d93fac 100644
--- a/lib/librte_pmd_virtio/virtio_pci.h
+++ b/lib/librte_pmd_virtio/virtio_pci.h
@@ -168,6 +168,7 @@ struct virtio_hw {
uint32_t max_tx_queues;
uint32_t max_rx_queues;
uint16_t vtnet_hdr_size;
+ uint8_t vlan_strip;
uint8_t use_msix;
uint8_t mac_addr[ETHER_ADDR_LEN];
};
diff --git a/lib/librte_pmd_virtio/virtio_rxtx.c
b/lib/librte_pmd_virtio/virtio_rxtx.c
index 78af334..e0216ec 100644
--- a/lib/librte_pmd_virtio/virtio_rxtx.c
+++ b/lib/librte_pmd_virtio/virtio_rxtx.c
@@ -49,6 +49,7 @@
#include <rte_prefetch.h>
#include <rte_string_fns.h>
#include <rte_errno.h>
+#include <rte_byteorder.h>
#include "virtio_logs.h"
#include "virtio_ethdev.h"
@@ -408,8 +409,8 @@ virtio_dev_tx_queue_setup(struct rte_eth_dev *dev,
PMD_INIT_FUNC_TRACE();
- if ((tx_conf->txq_flags & ETH_TXQ_FLAGS_NOOFFLOADS)
- != ETH_TXQ_FLAGS_NOOFFLOADS) {
+ if ((tx_conf->txq_flags & ETH_TXQ_FLAGS_NOXSUMS)
+ != ETH_TXQ_FLAGS_NOXSUMS) {
PMD_INIT_LOG(ERR, "TX checksum offload not supported\n");
return -EINVAL;
}
@@ -446,6 +447,7 @@ uint16_t
virtio_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts, uint16_t nb_pkts)
{
struct virtqueue *rxvq = rx_queue;
+ struct virtio_hw *hw = rxvq->hw;
struct rte_mbuf *rxm, *new_mbuf;
uint16_t nb_used, num, nb_rx = 0;
uint32_t len[VIRTIO_MBUF_BURST_SZ];
@@ -489,6 +491,9 @@ virtio_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts,
uint16_t nb_pkts)
rxm->pkt_len = (uint32_t)(len[i] - hdr_size);
rxm->data_len = (uint16_t)(len[i] - hdr_size);
+ if (hw->vlan_strip)
+ rte_vlan_strip(rxm);
+
VIRTIO_DUMP_PACKET(rxm, rxm->data_len);
rx_pkts[nb_rx++] = rxm;
@@ -717,6 +722,17 @@ virtio_xmit_pkts(void *tx_queue, struct rte_mbuf
**tx_pkts, uint16_t nb_pkts)
*/
if (likely(need <= 0)) {
txm = tx_pkts[nb_tx];
+
+ /* Do VLAN tag insertion */
+ if (txm->ol_flags & PKT_TX_VLAN_PKT) {
+ error = rte_vlan_insert(&txm);
+ if (unlikely(error)) {
+ rte_pktmbuf_free(txm);
+ ++nb_tx;
+ continue;
+ }
+ }
+
/* Enqueue Packet buffers */
error = virtqueue_enqueue_xmit(txvq, txm);
if (unlikely(error)) {
--
1.8.4.2
