Dear all, The issue was resolved. I want to see packet receive on host, but failed. Should launch VM with VF PCI passthrough, then we can see traffic in VM VF interface.
-Tianlin From: Zhou, Tianlin Sent: Wednesday, July 01, 2015 6:02 PM To: dev at dpdk.org Subject: [dpdk-dev] How to set pool mirror on Intel 82599ES Dear all, I used the following steps to setup pool mirror for Intel 82599ES, but failed. Step 1: I setup 4 VFs for 05:00.0 05:00.0 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01) 05:10.0 Ethernet controller: Intel Corporation 82599 Ethernet Controller Virtual Function (rev 01) 05:10.2 Ethernet controller: Intel Corporation 82599 Ethernet Controller Virtual Function (rev 01) 05:10.4 Ethernet controller: Intel Corporation 82599 Ethernet Controller Virtual Function (rev 01) 05:10.6 Ethernet controller: Intel Corporation 82599 Ethernet Controller Virtual Function (rev 01) Step 2: bind 05:00.0 to igb_uio Step3: start testpmd and then type the following command // I want to set pool mirroring on 05:00.0 // Mirror the traffic VF 4 - Pool 3 (05:10.6) to VF 3 - Pool 2 (05:10.4) set port 0 mirror-rule 0 pool-mirror 0x8 dst-pool 2 on Step 4: send traffic on VF4. I expected that I could see the same traffic on VF 3, but I failed. Any wrong with my steps? Anyone ever setup pool mirroring successfully? Thanks a lot! -Tianlin