Hi Honnappa,
I will take care of this in next patch set.
> -----Original Message-----
> From: Honnappa Nagarahalli <honnappa.nagaraha...@arm.com>
> Sent: Wednesday, October 21, 2020 12:58 PM
> To: Gujjar, Abhinandan S <abhinandan.guj...@intel.com>; dev@dpdk.org;
> Doherty, Declan <declan.dohe...@intel.com>; akhil.go...@nxp.com; Ananyev,
> Konstantin <konstantin.anan...@intel.com>
> Cc: Vangati, Narender <narender.vang...@intel.com>; jer...@marvell.com; nd
> <n...@arm.com>; Honnappa Nagarahalli <honnappa.nagaraha...@arm.com>;
> nd <n...@arm.com>
> Subject: RE: [v3 1/2] cryptodev: support enqueue callback functions
>
> <snip>
>
> >
> > This patch adds APIs to add/remove callback functions. The callback
> > function will be called for each burst of crypto ops received on a
> > given crypto device queue pair.
> >
> > Signed-off-by: Abhinandan Gujjar <abhinandan.guj...@intel.com>
> > ---
> > config/rte_config.h | 1 +
> > lib/librte_cryptodev/meson.build | 2 +-
> > lib/librte_cryptodev/rte_cryptodev.c | 201
> > +++++++++++++++++++++++++
> > lib/librte_cryptodev/rte_cryptodev.h | 153 ++++++++++++++++++-
> > lib/librte_cryptodev/rte_cryptodev_version.map | 2 +
> > 5 files changed, 357 insertions(+), 2 deletions(-)
> >
> > diff --git a/config/rte_config.h b/config/rte_config.h index
> > 03d90d7..e999d93
> > 100644
> > --- a/config/rte_config.h
> > +++ b/config/rte_config.h
> > @@ -61,6 +61,7 @@
> > /* cryptodev defines */
> > #define RTE_CRYPTO_MAX_DEVS 64
> > #define RTE_CRYPTODEV_NAME_LEN 64
> > +#define RTE_CRYPTO_CALLBACKS 1
> >
> > /* compressdev defines */
> > #define RTE_COMPRESS_MAX_DEVS 64
> > diff --git a/lib/librte_cryptodev/meson.build
> > b/lib/librte_cryptodev/meson.build
> > index c4c6b3b..8c5493f 100644
> > --- a/lib/librte_cryptodev/meson.build
> > +++ b/lib/librte_cryptodev/meson.build
> > @@ -9,4 +9,4 @@ headers = files('rte_cryptodev.h',
> > 'rte_crypto.h',
> > 'rte_crypto_sym.h',
> > 'rte_crypto_asym.h')
> > -deps += ['kvargs', 'mbuf']
> > +deps += ['kvargs', 'mbuf', 'rcu']
> > diff --git a/lib/librte_cryptodev/rte_cryptodev.c
> > b/lib/librte_cryptodev/rte_cryptodev.c
> > index 3d95ac6..5ba774a 100644
> > --- a/lib/librte_cryptodev/rte_cryptodev.c
> > +++ b/lib/librte_cryptodev/rte_cryptodev.c
> > @@ -448,6 +448,10 @@ struct
> > rte_cryptodev_sym_session_pool_private_data {
> > return 0;
> > }
> >
> > +#ifdef RTE_CRYPTO_CALLBACKS
> > +/* spinlock for crypto device enq callbacks */ static rte_spinlock_t
> > +rte_cryptodev_enq_cb_lock = RTE_SPINLOCK_INITIALIZER; #endif
> >
> > const char *
> > rte_cryptodev_get_feature_name(uint64_t flag) @@ -1136,6 +1140,203 @@
> > struct rte_cryptodev *
> > socket_id);
> > }
> >
> > +#ifdef RTE_CRYPTO_CALLBACKS
> > +
> > +struct rte_cryptodev_cb *
> > +rte_cryptodev_add_enq_callback(uint8_t dev_id,
> > + uint16_t qp_id,
> > + rte_cryptodev_callback_fn cb_fn,
> > + void *cb_arg)
> > +{
> > + struct rte_cryptodev *dev;
> > + struct rte_cryptodev_cb *cb, *tail;
> > + struct rte_cryptodev_enq_cb_rcu *list;
> > + struct rte_rcu_qsbr *qsbr;
> > + size_t size;
> > +
> > + /* Max thread set to 1, as one DP thread accessing a queue-pair */
> > + const uint32_t max_threads = 1;
> > +
> > + if (!cb_fn)
> > + return NULL;
> > +
> > + if (!rte_cryptodev_pmd_is_valid_dev(dev_id)) {
> > + CDEV_LOG_ERR("Invalid dev_id=%d", dev_id);
> > + return NULL;
> > + }
> > +
> > + dev = &rte_crypto_devices[dev_id];
> > + if (qp_id >= dev->data->nb_queue_pairs) {
> > + CDEV_LOG_ERR("Invalid queue_pair_id=%d", qp_id);
> > + return NULL;
> > + }
> > +
> > + rte_spinlock_lock(&rte_cryptodev_enq_cb_lock);
> > + if (dev->enq_cbs == NULL) {
> > + dev->enq_cbs = rte_zmalloc(NULL, sizeof(cb) *
> > + dev->data->nb_queue_pairs, 0);
> > + if (dev->enq_cbs == NULL) {
> > + CDEV_LOG_ERR("Failed to allocate memory for
> > callbacks");
> > + rte_spinlock_unlock(&rte_cryptodev_enq_cb_lock);
> > + rte_errno = ENOMEM;
> > + return NULL;
> > + }
> > +
> > + list = rte_zmalloc(NULL, sizeof(*list), 0);
> > + if (list == NULL) {
> > + CDEV_LOG_ERR("Failed to allocate memory for list on
> "
> > + "dev=%d, queue_pair_id=%d", dev_id, qp_id);
> > + rte_spinlock_unlock(&rte_cryptodev_enq_cb_lock);
> > + rte_errno = ENOMEM;
> > + rte_free(dev->enq_cbs);
> > + return NULL;
> > + }
> > +
> > + /* Create RCU QSBR variable */
> > + size = rte_rcu_qsbr_get_memsize(max_threads);
> > + qsbr = rte_zmalloc(NULL, size, RTE_CACHE_LINE_SIZE);
> > + if (qsbr == NULL) {
> > + CDEV_LOG_ERR("Failed to allocate memory for RCU
> on
> > "
> > + "dev=%d, queue_pair_id=%d", dev_id, qp_id);
> > + rte_spinlock_unlock(&rte_cryptodev_enq_cb_lock);
> > + rte_errno = ENOMEM;
> > + rte_free(list);
> > + rte_free(dev->enq_cbs);
> > + dev->enq_cbs[qp_id] = NULL;
> > + return NULL;
> > + }
> > +
> > + if (rte_rcu_qsbr_init(qsbr, max_threads)) {
> > + CDEV_LOG_ERR("Failed to initialize for RCU on "
> > + "dev=%d, queue_pair_id=%d", dev_id, qp_id);
> > + rte_spinlock_unlock(&rte_cryptodev_enq_cb_lock);
> > + rte_free(qsbr);
> > + rte_free(list);
> > + rte_free(dev->enq_cbs);
> > + dev->enq_cbs[qp_id] = NULL;
> > + return NULL;
> > + }
> > +
> > + dev->enq_cbs[qp_id] = list;
> > + list->qsbr = qsbr;
> > + }
> > +
> > + cb = rte_zmalloc(NULL, sizeof(*cb), 0);
> > + if (cb == NULL) {
> > + CDEV_LOG_ERR("Failed to allocate memory for callback on "
> > + "dev=%d, queue_pair_id=%d", dev_id, qp_id);
> > + rte_spinlock_unlock(&rte_cryptodev_enq_cb_lock);
> > + rte_errno = ENOMEM;
> > + return NULL;
> > + }
> > +
> > + cb->fn = cb_fn;
> > + cb->arg = cb_arg;
> > +
> > + /* Add the callbacks in fifo order. */
> > + list = dev->enq_cbs[qp_id];
> > + tail = list->next;
> > + if (tail) {
> > + while (tail->next)
> > + tail = tail->next;
> > + tail->next = cb;
> > + } else
> > + list->next = cb;
> > +
> Correct memory orderings need to be used to provide reader-writer
> concurrency. Please look at [1] for changes you need to make here.
> [1] https://patches.dpdk.org/patch/80603/
>
> > + rte_spinlock_unlock(&rte_cryptodev_enq_cb_lock);
> > +
> > + return cb;
> > +}
> > +
> > +int
> > +rte_cryptodev_remove_enq_callback(uint8_t dev_id,
> > + uint16_t qp_id,
> > + struct rte_cryptodev_cb *cb)
> > +{
> > + struct rte_cryptodev *dev;
> > + struct rte_cryptodev_cb **prev_cb, *curr_cb;
> > + struct rte_cryptodev_enq_cb_rcu *list;
> > + uint16_t qp;
> > + int free_mem;
> > + int ret;
> > +
> > + free_mem = 1;
> > + ret = -EINVAL;
> > +
> > + if (!cb) {
> > + CDEV_LOG_ERR("cb is NULL");
> > + return ret;
> > + }
> > +
> > + if (!rte_cryptodev_pmd_is_valid_dev(dev_id)) {
> > + CDEV_LOG_ERR("Invalid dev_id=%d", dev_id);
> > + return ret;
> > + }
> > +
> > + dev = &rte_crypto_devices[dev_id];
> > + if (qp_id >= dev->data->nb_queue_pairs) {
> > + CDEV_LOG_ERR("Invalid queue_pair_id=%d", qp_id);
> > + return ret;
> > + }
> > +
> > + list = dev->enq_cbs[qp_id];
> > + if (list == NULL) {
> > + CDEV_LOG_ERR("Callback list is NULL");
> > + return ret;
> > + }
> > +
> > + if (list->qsbr == NULL) {
> > + CDEV_LOG_ERR("Rcu qsbr is NULL");
> > + return ret;
> > + }
> > +
> > + rte_spinlock_lock(&rte_cryptodev_enq_cb_lock);
> > + if (dev->enq_cbs == NULL) {
> > + rte_spinlock_unlock(&rte_cryptodev_enq_cb_lock);
> > + return ret;
> > + }
> > +
> > + prev_cb = &list->next;
> > + for (; *prev_cb != NULL; prev_cb = &curr_cb->next) {
> > + curr_cb = *prev_cb;
> > + if (curr_cb == cb) {
> > + /* Remove the user cb from the callback list. */
> > + *prev_cb = curr_cb->next;
> > + ret = 0;
> > + break;
> > + }
> > + }
> > +
> > + if (!ret) {
> > + /* Call sync with invalid thread id as this is part of
> > + * control plane API
> > + */
> > + rte_rcu_qsbr_synchronize(list->qsbr,
> > RTE_QSBR_THRID_INVALID);
> > + rte_free(cb);
> > + }
> > +
> > + if (list->next == NULL) {
> > + rte_free(list->qsbr);
> > + rte_free(list);
> > + dev->enq_cbs[qp_id] = NULL;
> > + }
> > +
> > + for (qp = 0; qp < dev->data->nb_queue_pairs; qp++)
> > + if (dev->enq_cbs[qp] != NULL) {
> > + free_mem = 0;
> > + break;
> > + }
> > +
> > + if (free_mem) {
> > + rte_free(dev->enq_cbs);
> > + dev->enq_cbs = NULL;
> > + }
> > +
> > + rte_spinlock_unlock(&rte_cryptodev_enq_cb_lock);
> > +
> > + return ret;
> > +}
> > +#endif
> >
> > int
> > rte_cryptodev_stats_get(uint8_t dev_id, struct rte_cryptodev_stats
> > *stats) diff --git a/lib/librte_cryptodev/rte_cryptodev.h
> > b/lib/librte_cryptodev/rte_cryptodev.h
> > index 0935fd5..669746d 100644
> > --- a/lib/librte_cryptodev/rte_cryptodev.h
> > +++ b/lib/librte_cryptodev/rte_cryptodev.h
> > @@ -23,6 +23,7 @@
> > #include "rte_dev.h"
> > #include <rte_common.h>
> > #include <rte_config.h>
> > +#include <rte_rcu_qsbr.h>
> >
> > #include "rte_cryptodev_trace_fp.h"
> >
> > @@ -522,6 +523,34 @@ struct rte_cryptodev_qp_conf {
> > /**< The mempool for creating sess private data in sessionless mode
> > */ };
> >
> > +#ifdef RTE_CRYPTO_CALLBACKS
> > +/**
> > + * Function type used for pre processing crypto ops when enqueue
> > +burst is
> > + * called.
> > + *
> > + * The callback function is called on enqueue burst immediately
> > + * before the crypto ops are put onto the hardware queue for processing.
> > + *
> > + * @param dev_id The identifier of the device.
> > + * @param qp_id The index of the queue pair in which ops are
> > + * to be enqueued for processing. The value
> > + * must be in the range [0, nb_queue_pairs - 1]
> > + * previously supplied to
> > + * *rte_cryptodev_configure*.
> > + * @param ops The address of an array of *nb_ops* pointers
> > + * to *rte_crypto_op* structures which contain
> > + * the crypto operations to be processed.
> > + * @param nb_ops The number of operations to process.
> > + * @param user_param The arbitrary user parameter passed in by the
> > + * application when the callback was originally
> > + * registered.
> > + * @return The number of ops to be enqueued to the
> > + * crypto device.
> > + */
> > +typedef uint16_t (*rte_cryptodev_callback_fn)(uint16_t dev_id,
> > +uint16_t
> > qp_id,
> > + struct rte_crypto_op **ops, uint16_t nb_ops, void
> > *user_param);
> > +#endif
> > +
> > /**
> > * Typedef for application callback function to be registered by
> > application
> > * software for notification of device events @@ -822,7 +851,6 @@
> > struct rte_cryptodev_config {
> > enum rte_cryptodev_event_type event,
> > rte_cryptodev_cb_fn cb_fn, void *cb_arg);
> >
> > -
> > typedef uint16_t (*dequeue_pkt_burst_t)(void *qp,
> > struct rte_crypto_op **ops, uint16_t nb_ops);
> > /**< Dequeue processed packets from queue pair of a device. */ @@
> > -839,6
> > +867,33 @@ typedef uint16_t (*enqueue_pkt_burst_t)(void *qp,
> > /** Structure to keep track of registered callbacks */
> > TAILQ_HEAD(rte_cryptodev_cb_list, rte_cryptodev_callback);
> >
> > +#ifdef RTE_CRYPTO_CALLBACKS
> > +/**
> > + * @internal
> > + * Structure used to hold information about the callbacks to be
> > +called for a
> > + * queue pair on enqueue.
> > + */
> > +struct rte_cryptodev_cb {
> > + struct rte_cryptodev_cb *next;
> > + /** < Pointer to next callback */
> > + rte_cryptodev_callback_fn fn;
> > + /** < Pointer to callback function */
> > + void *arg;
> > + /** < Pointer to argument */
> > +};
> > +
> > +/**
> > + * @internal
> > + * Structure used to hold information about the RCU for a queue pair.
> > + */
> > +struct rte_cryptodev_enq_cb_rcu {
> > + struct rte_cryptodev_cb *next;
> > + /** < Pointer to next callback */
> > + struct rte_rcu_qsbr *qsbr;
> > + /** < RCU QSBR variable per queue pair */ }; #endif
> > +
> > /** The data structure associated with each crypto device. */ struct
> > rte_cryptodev {
> > dequeue_pkt_burst_t dequeue_burst;
> > @@ -867,6 +922,11 @@ struct rte_cryptodev {
> > __extension__
> > uint8_t attached : 1;
> > /**< Flag indicating the device is attached */
> > +
> > +#ifdef RTE_CRYPTO_CALLBACKS
> > + struct rte_cryptodev_enq_cb_rcu **enq_cbs;
> > + /**< User application callback for pre enqueue processing */ #endif
> > } __rte_cache_aligned;
> >
> > void *
> > @@ -989,6 +1049,25 @@ struct rte_cryptodev_data { {
> > struct rte_cryptodev *dev = &rte_cryptodevs[dev_id];
> >
> > +#ifdef RTE_CRYPTO_CALLBACKS
> > + if (unlikely(dev->enq_cbs != NULL && dev->enq_cbs[qp_id] != NULL)) {
> > + struct rte_cryptodev_enq_cb_rcu *list;
> > + struct rte_cryptodev_cb *cb;
> > +
> > + list = dev->enq_cbs[qp_id];
> > + cb = list->next;
> > + rte_rcu_qsbr_thread_online(list->qsbr, 0);
> Move this 2 lines up as you are reading the addresses.
> Also, look at the patch mentioned earlier for memory orderings.
>
> > +
> > + do {
> > + nb_ops = cb->fn(dev_id, qp_id, ops, nb_ops,
> > + cb->arg);
> > + cb = cb->next;
> > + } while (cb != NULL);
> > +
> > + rte_rcu_qsbr_thread_offline(list->qsbr, 0);
> > + }
> > +#endif
> > +
> > rte_cryptodev_trace_enqueue_burst(dev_id, qp_id, (void **)ops,
> > nb_ops);
> > return (*dev->enqueue_burst)(
> > dev->data->queue_pairs[qp_id], ops, nb_ops); @@ -
> > 1730,6 +1809,78 @@ struct rte_crypto_raw_dp_ctx {
> > rte_cryptodev_raw_dequeue_done(struct rte_crypto_raw_dp_ctx *ctx,
> > uint32_t n);
> >
> > +#ifdef RTE_CRYPTO_CALLBACKS
> > +/**
> > + * @warning
> > + * @b EXPERIMENTAL: this API may change without prior notice
> > + *
> > + * Add a user callback for a given crypto device and queue pair which
> > +will be
> > + * called on crypto ops enqueue.
> > + *
> > + * This API configures a function to be called for each burst of
> > +crypto ops
> > + * received on a given crypto device queue pair. The return value is
> > +a pointer
> > + * that can be used later to remove the callback using
> > + * rte_cryptodev_remove_enq_callback().
> > + *
> > + * Multiple functions are called in the order that they are added.
> > + *
> > + * @param dev_id The identifier of the device.
> > + * @param qp_id The index of the queue pair in which ops are
> > + * to be enqueued for processing. The value
> > + * must be in the range [0, nb_queue_pairs - 1]
> > + * previously supplied to
> > + * *rte_cryptodev_configure*.
> > + * @param cb_fn The callback function
> > + * @param cb_arg A generic pointer parameter which will be
> > passed
> > + * to each invocation of the callback function on
> > + * this crypto device and queue pair.
> > + *
> > + * @return
> > + * NULL on error.
> > + * On success, a pointer value which can later be used to remove the
> callback.
> > + */
> > +
> > +__rte_experimental
> > +struct rte_cryptodev_cb *
> > +rte_cryptodev_add_enq_callback(uint8_t dev_id,
> > + uint16_t qp_id,
> > + rte_cryptodev_callback_fn cb_fn,
> > + void *cb_arg);
> > +
> > +
> > +/**
> > + * @warning
> > + * @b EXPERIMENTAL: this API may change without prior notice
> > + *
> > + * Remove a user callback function for given crypto device and queue pair.
> > + *
> > + * This function is used to removed callbacks that were added to a
> > +crypto
> > + * device queue pair using rte_cryptodev_add_enq_callback().
> > + *
> > + *
> > + *
> > + * @param dev_id The identifier of the device.
> > + * @param qp_id The index of the queue pair in which ops are
> > + * to be enqueued for processing. The value
> > + * must be in the range [0, nb_queue_pairs - 1]
> > + * previously supplied to
> > + * *rte_cryptodev_configure*.
> > + * @param cb Pointer to user supplied callback created via
> > + * rte_cryptodev_add_enq_callback().
> > + *
> > + * @return
> > + * - 0: Success. Callback was removed.
> > + * - -EINVAL: The dev_id or the qp_id is out of range, or the callback
> > + * is NULL or not found for the crypto device queue pair.
> > + */
> > +
> > +__rte_experimental
> > +int rte_cryptodev_remove_enq_callback(uint8_t dev_id,
> > + uint16_t qp_id,
> > + struct rte_cryptodev_cb *cb);
> > +
> > +#endif
> > +
> > #ifdef __cplusplus
> > }
> > #endif
> > diff --git a/lib/librte_cryptodev/rte_cryptodev_version.map
> > b/lib/librte_cryptodev/rte_cryptodev_version.map
> > index 7e4360f..5d8d6b0 100644
> > --- a/lib/librte_cryptodev/rte_cryptodev_version.map
> > +++ b/lib/librte_cryptodev/rte_cryptodev_version.map
> > @@ -101,6 +101,7 @@ EXPERIMENTAL {
> > rte_cryptodev_get_qp_status;
> >
> > # added in 20.11
> > + rte_cryptodev_add_enq_callback;
> > rte_cryptodev_configure_raw_dp_ctx;
> > rte_cryptodev_get_raw_dp_ctx_size;
> > rte_cryptodev_raw_dequeue;
> > @@ -109,4 +110,5 @@ EXPERIMENTAL {
> > rte_cryptodev_raw_enqueue;
> > rte_cryptodev_raw_enqueue_burst;
> > rte_cryptodev_raw_enqueue_done;
> > + rte_cryptodev_remove_enq_callback;
> > };
> > --
> > 1.9.1
