On 1/6/2021 12:31 PM, Somalapuram, Amaranath wrote:


-----Original Message-----
From: Ferruh Yigit <ferruh.yi...@intel.com>
Sent: Monday, January 4, 2021 7:54 PM
To: Somalapuram, Amaranath <amaranath.somalapu...@amd.com>; dev@dpdk.org
Subject: Re: [PATCH v4] net/axgbe: support sfp module EEPROM

[CAUTION: External Email]

On 12/22/2020 7:01 AM, asoma...@amd.com wrote:
From: Amaranath Somalapuram <amaranath.somalapu...@amd.com>

Adding API for get_module_eeprom and get_module_info.wq

Signed-off-by: Amaranath Somalapuram <amaranath.somalapu...@amd.com>
---
   doc/guides/nics/features/axgbe.ini |   1 +
   drivers/net/axgbe/axgbe_ethdev.c   |   2 +
   drivers/net/axgbe/axgbe_phy.h      |   4 ++
   drivers/net/axgbe/axgbe_phy_impl.c | 108 +++++++++++++++++++++++++++++
   4 files changed, 115 insertions(+)

diff --git a/doc/guides/nics/features/axgbe.ini
b/doc/guides/nics/features/axgbe.ini
index 34df0d1ee..3a090183e 100644
--- a/doc/guides/nics/features/axgbe.ini
+++ b/doc/guides/nics/features/axgbe.ini
@@ -17,6 +17,7 @@ CRC offload          = Y
   L3 checksum offload  = Y
   L4 checksum offload  = Y
   Basic stats          = Y
+Module EEPROM dump   = Y
   Linux UIO            = Y
   x86-32               = Y
   x86-64               = Y
diff --git a/drivers/net/axgbe/axgbe_ethdev.c
b/drivers/net/axgbe/axgbe_ethdev.c
index cfe6aba73..22e05e8cb 100644
--- a/drivers/net/axgbe/axgbe_ethdev.c
+++ b/drivers/net/axgbe/axgbe_ethdev.c
@@ -257,6 +257,8 @@ static const struct eth_dev_ops axgbe_eth_dev_ops = {
       .timesync_adjust_time         = axgbe_timesync_adjust_time,
       .timesync_read_time           = axgbe_timesync_read_time,
       .timesync_write_time          = axgbe_timesync_write_time,
+     .get_module_info              = axgbe_get_module_info,
+     .get_module_eeprom            = axgbe_get_module_eeprom,
   };

   static int axgbe_phy_reset(struct axgbe_port *pdata) diff --git
a/drivers/net/axgbe/axgbe_phy.h b/drivers/net/axgbe/axgbe_phy.h index
77ee20a31..d9d7fde41 100644
--- a/drivers/net/axgbe/axgbe_phy.h
+++ b/drivers/net/axgbe/axgbe_phy.h
@@ -188,5 +188,9 @@
   #define DUPLEX_FULL             0x01
   #define DUPLEX_UNKNOWN          0xff

+int axgbe_get_module_info(struct rte_eth_dev *dev,
+                             struct rte_eth_dev_module_info
+*modinfo); int axgbe_get_module_eeprom(struct rte_eth_dev *dev,
+                               struct rte_dev_eeprom_info *info);
   #endif
   /* PHY */
diff --git a/drivers/net/axgbe/axgbe_phy_impl.c
b/drivers/net/axgbe/axgbe_phy_impl.c
index 02236ec19..af18a8d51 100644
--- a/drivers/net/axgbe/axgbe_phy_impl.c
+++ b/drivers/net/axgbe/axgbe_phy_impl.c
@@ -141,12 +141,18 @@ enum axgbe_sfp_speed {

   #define AXGBE_SFP_EXTD_CC                   31

+#define AXGBE_SFP_EEPROM_PAGE_SIZE           256
+
   struct axgbe_sfp_eeprom {
       u8 base[64];
       u8 extd[32];
       u8 vendor[32];
   };

+struct axgbe_sfp_eeprom_module {
+     u8 base[AXGBE_SFP_EEPROM_PAGE_SIZE]; };
+
   #define AXGBE_BEL_FUSE_VENDOR       "BEL-FUSE"
   #define AXGBE_BEL_FUSE_PARTNO       "1GBT-SFP06"

@@ -734,6 +740,108 @@ static int axgbe_phy_sfp_read_eeprom(struct axgbe_port 
*pdata)
       return ret;
   }

+int axgbe_get_module_info(struct rte_eth_dev *dev,
+                             struct rte_eth_dev_module_info *modinfo)
+{
+     struct axgbe_port *pdata = dev->data->dev_private;
+     struct axgbe_sfp_eeprom sfp_eeprom;
+     uint8_t eeprom_addr;
+     int ret;
+
+     ret = axgbe_phy_get_comm_ownership(pdata);
+
+     if (ret)
+             return -EIO;
+
+     ret = axgbe_phy_sfp_get_mux(pdata);
+
+     if (ret) {
+             PMD_DRV_LOG(ERR, "I2C error setting SFP MUX\n");
+             goto put;
+     }
+
+     eeprom_addr = 0;
+     ret = axgbe_phy_i2c_read(pdata, AXGBE_SFP_SERIAL_ID_ADDRESS,
+                     &eeprom_addr, sizeof(eeprom_addr),
+                      &sfp_eeprom, sizeof(sfp_eeprom));
+
+     if (ret) {
+             PMD_DRV_LOG(ERR, "I2C error reading SFP EEPROM\n");
+             goto put;
+     }
+
+     if (sfp_eeprom.extd[AXGBE_SFP_EXTD_SFF_8472] != 0xff) {

The 'else' case of this check seems wrong, which returns success but doesn't 
set modinfo correctly.

I have used the reference code from i40e_ethdev.c and ixgbe_ethdev.c. let me 
know your inputs.


I am not sure what exactly you are referencing in i40e & ixgbe, as far as I can see there is no similar usage on them, if there is please show it to me.

Above issue is, what if "sfp_eeprom.extd[AXGBE_SFP_EXTD_SFF_8472] == 0xff", what will happen in that case? As far as I can see in that case function returns success, but the 'modinfo' is not updated at all, am I missing something?

+             if (sfp_eeprom.extd[AXGBE_SFP_EXTD_SFF_8472] == 0) {
+                     modinfo->type = RTE_ETH_MODULE_SFF_8079;
+                     modinfo->eeprom_len = RTE_ETH_MODULE_SFF_8079_LEN;
+             } else {
+                     modinfo->type = RTE_ETH_MODULE_SFF_8472;
+                     modinfo->eeprom_len = RTE_ETH_MODULE_SFF_8472_LEN;
+             }
+     }
+
+put:
+     axgbe_phy_sfp_put_mux(pdata);
+     axgbe_phy_put_comm_ownership(pdata);
+     return ret;
+}
+

<...>

Reply via email to