When NVM API version is 1.7 or above adminq operation to set TPID is
set as supported. This cause using adminq instead of registers.
For SFP_I_X722 FW4.16, reported NVM API version is 1.8, and this cause
adminq operation to set as supported but it is not supported on FW4.16
Additional check added for SFP_I_X722 to not enable adminq operation.
Fixes: 9efa8d28b4da ("net/i40e: fix SFP X722 with FW4.16")
Cc: sta...@dpdk.org
Signed-off-by: Weifeng Li <liweifen...@126.com>
---
drivers/net/i40e/i40e_ethdev.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
index 1462248..a07879c 100644
--- a/drivers/net/i40e/i40e_ethdev.c
+++ b/drivers/net/i40e/i40e_ethdev.c
@@ -1550,7 +1550,8 @@ eth_i40e_dev_init(struct rte_eth_dev *dev, void
*init_params __rte_unused)
return -EIO;
}
/* Firmware of SFP x722 does not support adminq option */
- if (hw->device_id == I40E_DEV_ID_SFP_X722)
+ if (hw->device_id == I40E_DEV_ID_SFP_X722 ||
+ hw->device_id == I40E_DEV_ID_SFP_I_X722)
hw->flags &= ~I40E_HW_FLAG_802_1AD_CAPABLE;
PMD_INIT_LOG(INFO, "FW %d.%d API %d.%d NVM %02d.%02d.%02d eetrack %04x",
--
2.9.5
