From: Hongbo Zheng <[email protected]>
The original command opcode '0x700A' may cause firmware error,
so '0x700A' is deserted, now use '0x700B' to replace it.
Fixes: 223d9eceaeee ("net/hns3: clear residual hardware configurations on init")
Cc: [email protected]
Signed-off-by: Hongbo Zheng <[email protected]>
Signed-off-by: Lijun Ou <[email protected]>
---
drivers/net/hns3/hns3_cmd.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/hns3/hns3_cmd.h b/drivers/net/hns3/hns3_cmd.h
index 194c3a7..e40293b 100644
--- a/drivers/net/hns3/hns3_cmd.h
+++ b/drivers/net/hns3/hns3_cmd.h
@@ -203,7 +203,7 @@ enum hns3_opcode_type {
HNS3_OPC_FD_COUNTER_OP = 0x1205,
/* Clear hardware state command */
- HNS3_OPC_CLEAR_HW_STATE = 0x700A,
+ HNS3_OPC_CLEAR_HW_STATE = 0x700B,
/* SFP command */
HNS3_OPC_SFP_GET_SPEED = 0x7104,
--
2.7.4
